Hello !!!
Clean Rom Project !
About :
based on Huawei firmware B118 !
49 languages !
insecure kernel - linux 3.0.8 !
init.d enabled on kernel !
USB debugging enabled by default !
added module governor minmax ! ( for save battery .. )
added sio, sioplus, vr & zen modules iosched !
removed almost unnecessary Huawei app !
added some Google apps !
Android 4.3.1 Gallery & cammera ( enabled Pinch To Zoom, added more effects & enabled photosphere ! )
Android 4.4 camera ( enabled photosphere ! )
Android 4.4 Google search !
Android 4.4 GoogleKeyboard !
Android 4.4 GoogleHome !
Android 4.4 bootanimation !
added SuperSu instead CM Superuser !
enabled : notification_panel, gloves mode , navigation_bar & Use only 2G network !
Changelog :
CleanRom V02
Downloads :
New Update : CleanRom_V02.zip
CleanRom_V01.zip Sum MD5 : 7e6362843140a20e947d97e4f9a8de4f
Stock_boot&recovery_B118.zip Sum MD5 : 3a4f9a2af2d09e06206bdd27be351608
Installation :
your device should be run also stock firmware B118 ( CN )!
install TWRP Recovery !
go to TWRP Recovery
Wipe
Advanced Wipe -> check : Dalvik Cache , System, Cache, Custom Storage & Data
Swipe to Wipe
Install
External Storage -> CleanRom_V01.zip
Home
Install
External Storage -> Enable_USB.zip
Wipe Cache & Dalvik
Reboot System !
enjoy !!!
Warning :
if you want to revert to stock B118 firmware or flash other Huawei firmware ( UPDATE.APP )
download Stock_boot&recovery_B118.zip
install in TWRP Recovery or :
extract & put boot.img & recovery.img on your external sdcard !
# dd if=/storage/sdcard1/boot.img of=/dev/block/mmcblk0p12
# dd if=/storage/sdcard1/recovery.img of=/dev/block/mmcblk0p11
Now you are able to enter on stock recovery and to make a safe install from Huawei firmware !
Installing only if you are sure what you do & also at your own risk, I'm not responsible in any way, if your device will not boot !!!
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
regards,
Surdu Petru
***reserved***
Enable USB for CleanRom V01 !
Please download Enable_USB.zip !
Put your device in TWRP Recovery !
Mount external storage !
Copy archive here !
"Unmount driver from PC !"
Unmount !
Install !
( No need anything to wipe ! )
Reboot to System !
Thanks !
I can't wait to see what it is like to have a clean rom on p6 !
decomarius said:
I can't wait to see what it is like to have a clean rom on p6 !
Click to expand...
Click to collapse
+1
Oh great :3 Hoping this works with the European version of the P6.
Surdu,could you put the navbar smaller and black ??
neodante said:
Surdu,could you put the navbar smaller and black ??
Click to expand...
Click to collapse
te pille neodante xD
Serdu this rom will be quicker than the stock ?
ReDXfiRe said:
Oh great :3 Hoping this works with the European version of the P6.
Click to expand...
Click to collapse
Yes !
neodante said:
Surdu,could you put the navbar smaller and black ??
Click to expand...
Click to collapse
Yes, maybe in the next update, cause now I'm in a hurry to start work on CM
alex61194 said:
te pille neodante xD
Serdu this rom will be quicker than the stock ?
Click to expand...
Click to collapse
For me work like a charm , need also your opinions ...
Translucent or black navbar
Great work surdu_petru, You're the man. Would be even better with a translucent navigation bar. If not possible, black is better than gray.
alex61194 said:
te pille neodante xD
Click to expand...
Click to collapse
Jajajajajaja
Installed and fully working. Like the KK bootanimation.
Thanks Petru. Contributor have to be changed in Developer!
whats about the pull-down menu ... is it vanilla or is it huawei ?
I just have one question. Do we need to have B118 international version or B118 Chinese version. Btw, Chinese version bricked my phone
lucky58 said:
Installed and fully working. Like the KK bootanimation.
Thanks Petru. Contributor have to be changed in Developer!
Click to expand...
Click to collapse
Thanks ...
You are awfully nice
raolleel said:
whats about the pull-down menu ... is it vanilla or is it huawei ?
Click to expand...
Click to collapse
For the moment is still Huawei !
goce.nakov said:
I just have one question. Do we need to have B118 international version or B118 Chinese version. Btw, Chinese version bricked my phone
Click to expand...
Click to collapse
Hi!
Yes, I know... unfortunately must be the Chinese B118 ! I already bricked my device with Chinese B117 ( broken motherboard ) , luckily they gave me a new one, because take too long to replace the motherboard
surdu_petru said:
Hi!
Yes, I know... unfortunately must be the Chinese B118 ! I already bricked my device with Chinese B117 ( broken motherboard ) , luckily they gave me a new one, because take too long to replace the motherboard
Click to expand...
Click to collapse
I will wait for their answer few more days and then I will make some noise for replacement
surdu_petru said:
Hi!
Yes, I know... unfortunately must be the Chinese B118 ! I already bricked my device with Chinese B117 ( broken motherboard ) , luckily they gave me a new one, because take too long to replace the motherboard
Click to expand...
Click to collapse
if i have chinesse b118 and i put b122 i will have a brick? i can put your rom without brick?
Will the 118 Chinese with unlocked bootloader can brick (soft or hard) the cellphone. I'd suggest the direct link for the 118 Chinese version on the opening. Man making me a lil nervous the Chinese firmware 118 might hard brick the P06.
alex61194 said:
if i have chinesse b118 and i put b122 i will have a brick? i can put your rom without brick?
Click to expand...
Click to collapse
I installed B118 (cn) two times from B111 international without issue ! Sould be batter if you install first B111 and than B118 (cn ) !
surdu_petru said:
I installed B118 (cn) two times from B111 international without issue ! Sould be batter if you install first B111 and than B118 (cn ) !
Click to expand...
Click to collapse
i have the chinesse b118 i installed it from b119 my question is i put a international version i have brick?
---------- Post added at 10:48 PM ---------- Previous post was at 10:46 PM ----------
surdu_petru said:
I installed B118 (cn) two times from B111 international without issue ! Sould be batter if you install first B111 and than B118 (cn ) !
Click to expand...
Click to collapse
sorry i for for all the replies xD you can use antutu for see if the score change thanks
Related
Hello to everyone !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei Ascend P6-U06
Huawei Ascend Mate - HAM
STATE - Stable version !
To be flashed on International version ( locked firmware ) !
About :
builded from the last updated CyanogenMod 10.1 source ;
based on Firmware B125 !
build safe to flash only if you follow the steps to Installation !
Include the last update TWRP Recovery R02.1 !!!
added Camera360 & Torch !
Not Working :
video camera ;
Wi-Fi hotspot ;
H/W video decoder ;
settings/battery data usage ;
Downloads :
New Update : cm-10.1-20140108-UNOFFICIAL-hwp6_u06.zip SumMD5 : d15dd195cd2d6ba93de4ec96fb71a609
cm-10.1-20140108-UNOFFICIAL-hwp6_u06.zip SumMD5 : f16e5cac1310a13d3396fa1df27299c3
cm-10.1-20140105-UNOFFICIAL-hwp6_u06.zip SumMD5 : e210983786bcdedcea6d4f3e4148cd52
cm-10.1_beta.zip SumMD5 : c116fc2f96de8338ee4476058802ecb6
CM10.1_Beta.zip with TWRP Recovery R02 ! SumMD5 : e50ff34fb87fab5ee903d83acadf1046
gapps-jb-20130812-signed.zip !
Installation :
can be installed on any International Firmware !
root your device !
install TWRP Recovery : R02 or R02.1 !
copy cm-10.1 build & gapps on your external sdcard !
put your device in recovery mod ;
Wipe -> Advanced Wipe -> select : Dalvik Cache, System, Cache, Custom Storage & Data !
Swipe to Wipe ;
Install -> select : Storage : External Storage !
select cm-10.1-rom
Add More Zips
select gapps
Swipe to Confirm Flash !
Wipe cache/dalvik !
Reboot System !
Enjoy ...
Bug Fix :
enable_a2dp.zip - 657.98 KB
If Gmail or other gapps cannot update from PlayStore, please navigate to Settings -> Apps -> search your app -> Clear data ! Now please try again to update !
Click to expand...
Click to collapse
Credit :
CyanogenMod, AshRoller, scue
special thanks to @PulseDroid
Source :
GitHub !
Screenshots :
Thank you very much to all donors - ! This helps to maintain and continue this project !
regards,
Surdu Petru
***reserved***
Wondeful! That's i need! Thanks!
Excellent job!
Soon almost have fixed the bugs.
And now this International version, show your great interest and effort to work with CM and P6. :good:
Thank you very much.:laugh:
Best Regards
Woauu! Excellent job.
This rom have the theme chooser app ??
Not Working :
camera ;
gps ;
maybe some other small stuff :
audio a2dp ;
USB mass storage ;
FmRadio - not working yet
Click to expand...
Click to collapse
Works fine here.
UPDATE:
Root doesn't seem to work?
Always says Superuser Denied, even if I set it to prompt, or auto allow. I also tried re-rooting with E-Root
Got a possible fix for camera, testing now.
PulseDroid said:
Works fine here.
UPDATE:
Root doesn't seem to work?
Always says Superuser Denied, even if I set it to prompt, or auto allow. I also tried re-rooting with E-Root
Got a possible fix for camera, testing now.
Click to expand...
Click to collapse
for me works great
@alex61194
Can you move apps to system?
PulseDroid said:
@alex61194
Can you move apps to system?
Click to expand...
Click to collapse
I can't confirmr you now because i back yo clean rom but i use titanium backup and this app requires root for work
Whaaaat ? How did you get around the signature lock thing ?
warea said:
Whaaaat ? How did you get around the signature lock thing ?
Click to expand...
Click to collapse
It's a port, stock kernel.
Yes, I don't know why su not work on this version ! Su it's just ok on B118(cn) port !
But you have here insecure adbd, when you type : adb shell you can see "#" , so should not be hard to fix !
I'll try to fix later cause I'm busy for moment !
Hi, Surdu!
First of all, thanks for your great work. Flashed CM and it works! Will this international version be updated so often as the Chinese B118 based version? Installed this because i didnt want to take risk to brick my brilliant device :laugh:
I've one problem with this! When i booted the device, i started to get popup "Android keyboard (AOSP) stopped, it keeps force closing. I cannot login to play store etc... without keyboard. I managed to install another keyboard (AI TYPe) trought usb, but this was very annoying!
Now everythings working fine!
---------- Post added at 11:21 PM ---------- Previous post was at 10:22 PM ----------
PulseDroid said:
Works fine here.
UPDATE:
Root doesn't seem to work?
Always says Superuser Denied, even if I set it to prompt, or auto allow. I also tried re-rooting with E-Root
Got a possible fix for camera, testing now.
Click to expand...
Click to collapse
Try to root with method 4, root wizard. For me work like a charm.
Root works fine with Method 3 too =)
Edit. Or not, It removes root in every time you reboot...
Hi surdu,
I'm running my HAM with your cm10.1 beta for p6. It seems OK. Below are some points I see from this ROM.
-no root access
-camera cannot connect
-no GPS
-no mobile signal strength icon on the status bar. Only grey triangle there.
-antutu x point 15xxx
-device name will be P6-U06
Will come back for further points.
Anyway, thanks a lot for your great work.
Sent from my P6-U06 using xda app-developers app
googgiggs said:
Hi surdu,
I'm running my HAM with your cm10.1 beta for p6. It seems OK. Below are some points I see from this ROM.
-no root access
-camera cannot connect
-no GPS
-no mobile signal strength icon on the status bar. Only grey triangle there.
-antutu x point 15xxx
-device name will be P6-U06
Will come back for further points.
Anyway, thanks a lot for your great work.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Camera is currently not functional, surdu is working on that. He managed to get the GPS working. Signal strength icon is bugged yes, this happens on many devices with cm, should be easy to fix after he gets the bigger bugs out & hardware working. Antutu score will probably go slightly better once we get different kernels.
Wifi and bluetooth works without cuts ?
No need to wipe when update from last build?
ADHDDHDA said:
No need to wipe when update from last build?
Click to expand...
Click to collapse
Yes, but only cache & dalvik-cache in this case !
neodante said:
Wifi and bluetooth works without cuts ?
Click to expand...
Click to collapse
Any news about this?
Hello !
Stock Firmware Huawei KitKat B506 ( Chinese ) !
Code:
[CENTER]* Android 4.4.2 - Stable Chinese Version !
* Kernel version 3.0.8-00771 ( 24/03/2014 )
* Firmware Rooted !
* Stock Firmware Huawei B506 Unmodified ( added only root access ) !
* Installed ONLY on TWRP 2.6.3.7 !!!
* this rom does not contain Gapps ![/CENTER]
Downloads :
Code:
[CENTER]
* [URL="http://www.androidfilehost.com/?fid=23329332407583309"]B506_CN.zip[/URL]
* Mirror : [URL="https://mega.co.nz/#!MoQD3LQR!uC70W0X_3mnNAyaZopJff5tnSnvAjK98mUAMyqOEc0A"]B506_CN.zip[/URL]
* Google GApps for Android 4.4.2 : [URL="https://www.androidfilehost.com/?fid=23311191640114013"]gapps-kk-20140105-signed.zip[/URL]
* Delete unnecessary applications : [URL="https://play.google.com/store/apps/details?id=com.ficeto.alliancemanager&hl=ro"]ROM Customizer[/URL] !
[/CENTER]
Installation:
Code:
[CENTER]* your device must be already updated to Huawei KitKat Beta !
* download rom and put it on external storage !
* go to TWRP and wipe : cache, dalvik-cache, data, cust & system !
* install B506 ROM !
* reboot to system & enjoy !!! [/CENTER]
Enable ART !
Code:
[CENTER]* [URL=http://forum.xda-developers.com/showthread.php?p=51589891#post51589891][DEV]ART Enabler - Kitkat B506[/URL] - by [URL="http://forum.xda-developers.com/member.php?u=4425071"]PulseDroid[/URL][/CENTER]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
regards,
Surdu Petru
*** reserved ***
Are GApps working? Or not because its not mentions in OP, only that they are not included? Can I flash them thru TWRP?
Gesendet von meinem P6-U06
gapps
you can flash gapps over the rom
so far i know
good work @surdu_petru !
LINK GAPPS https://mega.co.nz/#!LtgwkAQb!6nRBqfOR7ZdG7VDqVVX_a39dzOpd4ksqhAP8VGcfsgo
taaeem said:
Are GApps working? Or not because its not mentions in OP, only that they are not included? Can I flash them thru TWRP?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Yes, gapps also working ! Right now tested, that's why is not yet on OP !
Will this works only on CDMA?
root with kingroot also works ?? ohhh.. now i see its twrp full backup zip ;p
...i was dreamig.. they will give us LTE connectivity support with KK ;p
Hello Petru, will it work on twrp 2.6.3.5? do you know where can we find a change log between this and kk beta?
Ps. Thank you for your great work. Mulțumim, Seara faina!
Sent from my P6-U06 using Tapatalk 2
cpx07 said:
Hello Petru, will it work on twrp 2.6.3.5? do you know where can we find a change log between this and kk beta?
Ps. Thank you for your great work. Mulțumim, Seara faina!
Sent from my P6-U06 using Tapatalk 2
Click to expand...
Click to collapse
Salut !
Maybe will work but with some issue ! You must use 2.6.3.7 because is for KitKat and include also kitkat recovery-kernel !
Change Log !
Multumesc, o seara faina si tie ! ( Thanks & good luck ! )
Are there any differences between this version Abd the update.APP version for stock recovery? Because I'm on Omni Rom and I don't to flash the stock recovery first and then the update also I don't know if the normal version can be rooted?
Gesendet von meinem P6-U06
taaeem said:
Are there any differences between this version Abd the update.APP version for stock recovery? Because I'm on Omni Rom and I don't to flash the stock recovery first and then the update also I don't know if the normal version can be rooted?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
No, no difference between this rom and stock Huawei B506 !
The only diff : ( has root in ... ) !
can you flash this when coming from omnirom? kitkat beta was flashed before i installed kitkat, so it should work?
How is the battery life. My P6 is stolen, and I dont know if I should get a P6 again of a Galaxy s4 mini. The phones is expensive and I want battery life.
benna said:
How is the battery life. My P6 is stolen, and I dont know if I should get a P6 again of a Galaxy s4 mini. The phones is expensive and I want battery life.
Click to expand...
Click to collapse
just been released, wait for checking
benna said:
How is the battery life. My P6 is stolen, and I dont know if I should get a P6 again of a Galaxy s4 mini. The phones is expensive and I want battery life.
Click to expand...
Click to collapse
Neither. Just wait for 2014 phones to get released and not be stuck with outdated one.
At first flash it gives me an error message, unable to open file, i did the download from the first link via my mobile.
I am downloading now from my laptop and putting it to SD, i will update my comment if necessary.
Edit 1: now i have noticed that the size of the file is different from the first download link compared to the second one
Edit 2: the zip archive from Mega is flashing now, i will come with feedback after install.
Edit 3: the rom booted, feels smooth, i don't know if matters but antutu and quadrant compare to hy52rom v7 , around 15.500-16.000 in antutu and 4500-4900 in quadrand, so that is good.
Great work sandu_petru, thank you for keeping our phone up to date hope to see an amazing custom rom from you in the future, cleaned by all the bloatware from huawei
Thanks
cpx07 said:
At first flash it gives me an error message, unable to open file, i did the download from the first link via my mobile.
I am downloading now from my laptop and putting it to SD, i will update my comment if necessary.
Edit 1: now i have noticed that the size of the file is different from the first download link compared to the second one
Edit 2: the zip archive from Mega is flashing now, i will come with feedback after install.
Thanks
Click to expand...
Click to collapse
How long does it take for the first boot? I'm waiting for about 10 minutes and nothing...
mandgeo said:
How long does it take for the first boot? I'm waiting for about 10 minutes and nothing...
Click to expand...
Click to collapse
Around 5 minutes for me, did you do a clean install?
- wipe everything except internal and external storage
- flash rom
- wipe cache and dalvik
- flash gaps
- wipe cache and dalvik
- reboot
cpx07 said:
Around 5 minutes for me, did you do a clean install?
- wipe everything except internal and external storage
- flash rom
- wipe cache and dalvik
- flash gaps
- wipe cache and dalvik
- reboot
Click to expand...
Click to collapse
Yes. And flashed the rom from Mega. Now i'm back on B132. Someone on huaweinews sais that flashing from stock jb keeps the google apps.
mandgeo said:
Yes. And flashed the rom from Mega. Now i'm back on B132. Someone on huaweinews sais that flashing from stock jb keeps the google apps.
Click to expand...
Click to collapse
hmm..strange, i didn't have any problems, all works for me, i don't know about the battery life, already at 70% in 1 hour, but i was flashing and installing and testing so can't say wright now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.16 by @Androxyde
XZDualRecovery 2.7.90 BETA or newer.
Current rooted FW version: 10.4.1.B.0.101.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.123 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 10.5.A.0.230:
Files (Find them on the DevDB Download tab!):
For C6502: Download C6502_10.5.A.0.230.flashable.zip (890MB) and C6502_10.5.A.0.230_Stripped.ftf (17MB)
For C6503: Download C6503_10.5.A.0.230.flashable.zip (902MB) and C6503_10.5.A.0.230_Stripped.ftf (17MB)
For C6506: Download C6506_10.5.A.0.230.flashable.zip (903MB) and C6506_10.5.A.0.230_Stripped.ftf (17MB)
Save them somewhere you remember;
Put 'C65XX_10.5.A.0.230.flashable.zip' on (the external) SDcard1;
Put 'C65XX_10.5.A.0.230_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C65XX_10.5.A.0.230.flashable.zip' in TWRP (if you notice your phone reboot during the update process, update to the latest XZDualRecovery and try again);
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C65XX_10.5.A.0.230_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 10.4.1.B.0.101;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][C650X][4.4] Update to 10.5.A.0.230 [Root & XZDR], ROM for the Sony Xperia ZL
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Abandoned
Current Stable Version: 10.5.A.0.230
Stable Release Date: 2014-05-24
Created 2014-05-24
Last Updated 2014-08-20
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
edit : availability 0 in torrent . :S
demonicangell™ said:
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
Click to expand...
Click to collapse
no, you didn't
That's the beauty of the DevDB, it allows me to create 2 more posts just under the OP if I need them
demonicangell™ said:
awesome !!! downloading now .. thank you
ps. hope i didnt take ur post if u wanted to put more info
edit : availability 0 in torrent . :S
Click to expand...
Click to collapse
If you have a C6506 that's correct: I ran out of space ... created some and it will be online soon.
[NUT] said:
If you have a C6506 that's correct: I ran out of space ... created some and it will be online soon.
Click to expand...
Click to collapse
no trying to download 02 version ..
edit - same with 03 now ..
demonicangell™ said:
no trying to download 02 version ..
edit - same with 03 now ..
Click to expand...
Click to collapse
Well... then something is wrong at your end, as I am watching 7-10 people downloading both the 02 and 03 version.
06 version is now online.
[NUT] said:
Well... then something is wrong at your end, as I am watching 7-10 people downloading both the 02 and 03 version.
06 version is now online.
Click to expand...
Click to collapse
ok it started now dont know why it took so much time .. :good:
Ooww Great Work!
Thanks!
Sent from my C6503 using XDA Premium 4 mobile app
happy to report no lags in anything .. notification bar /settings or keyboard ..
flashed c6502 version .
Hi,
Can I go straight from 4.2.2 FW .67 rooted or do I need to update first to 4.3 FW .101 ?
I didn't try it yet, downloading files first.
It works with locked bootloader, right?
Thx!
Works fine as everytime. Thanks [NUT]!
---------- Post added at 05:18 PM ---------- Previous post was at 04:31 PM ----------
If you have issues writing to the external sdcard use this:
https://play.google.com/store/apps/details?id=nextapp.sdfix
Hi, I've got existenz ROM v5 installed. Can i install directly from that after doing a complete data/cache wipe?
fabioascoelho said:
Hi,
Can I go straight from 4.2.2 FW .67 rooted or do I need to update first to 4.3 FW .101 ?
I didn't try it yet, downloading files first.
It works with locked bootloader, right?
Thx!
Click to expand...
Click to collapse
It should work, but as I have no ZL to play with nor did I test it on anything else then 101 I'd say: create a solid backup and just go for it. In theory it should work between any stock rom based on 4.2.2 and up.
[NUT] said:
It should work, but as I have no ZL to play with nor did I test it on anything else then 101 I'd say: create a solid backup and just go for it. In theory it should work between any stock rom based on 4.2.2 and up.
Click to expand...
Click to collapse
I have the same configuration and it worked for me!
sid3091 said:
Hi, I've got existenz ROM v5 installed. Can i install directly from that after doing a complete data/cache wipe?
Click to expand...
Click to collapse
Me, too. Since Existenz 5 is .101 will it work? Would love to update on my upcoming nightshift!
detective zero said:
Me, too. Since Existenz 5 is .101 will it work? Would love to update on my upcoming nightshift!
Click to expand...
Click to collapse
yea i came from existenz v5 too . no issues
Once more we must thank @Nut a lot for making it possible to have the latest Xperia FW with root. Thanks very much. Still I have one question. On .569 and .101 though I installed the SuperSU fix, after installing rom, I still had problems using Foldermount with remount/reboot issue.
Then I solved it again applying your Remount/Reboot fix tool kit.
Could you please tell me if the issue hapens again with 4.4.2, I will be able to fix with the same tool?
Best regards.
demonicangell™ said:
yea i came from existenz v5 too . no issues
Click to expand...
Click to collapse
Did you do a full wipe or just update?
I don't get it to work. I'm always stuck on "formatting system" and screen flickers. Tried both updating and full wipe first... Any ideas?
detective zero said:
Did you do a full wipe or just update?
I don't get it to work. I'm always stuck on "formatting system" and screen flickers. Tried both updating and full wipe first... Any ideas?
Click to expand...
Click to collapse
Update xzdualrecovery to the latest version and try again, if it still fails...
I know this is going to sound odd but do it, for real:
Grab another external sdcard or use an USB otg device....
lclaudiogb said:
Once more we must thank @Nut a lot for making it possible to have the latest Xperia FW with root. Thanks very much. Still I have one question. On .569 and .101 though I installed the SuperSU fix, after installing rom, I still had problems using Foldermount with remount/reboot issue.
Then I solved it again applying your Remount/Reboot fix tool kit.
Could you please tell me if the issue hapens again with 4.4.2, I will be able to fix with the same tool?
Best regards.
Click to expand...
Click to collapse
Foldermount really needs to get fixed somehow because the reboot remount fix is fully integrated in xzdualrecovery... It's probably even better in xzdualrecovery then in the fix... Foldermount probably does something which just sets all alarms off in the rom or screws about with something zygote goes mad about...
I'm not responsible for any damage what-so-ever done to your phone, as with any ROM, you accept this risk.
This ROM is port from LG G pro2 F350K20b.
Change log 2.1 :
1. Port from LG G pro2 F350K20b.
2. Debloat
3. Animation memory leak
4. Fix NFC (Maybe Not stable But can use)
5. Fix Maximum Battery to 3000
6. init.d support
7. L Tewak+Build.prop
8. Support D802/D805
9. KK Bootloader packaging
10. 4K,Slow motion mode
Click to expand...
Click to collapse
For D805 PLEASE .. read instruction before flash ROM
Thank @renzo090513 , D805 user who help me testing ROM.It is working.
Before you decide to flash this ROM please make sure you can get previous ROM (backup/restore)
...
Download link (Google Drive) : http://bit.ly/18t2kbb
Download link (MEGA) : http://bit.ly/1EoVoqA (Thank Loy Daniot Bensig FB member for mirror)
Download link (uptobox) : http://bit.ly/1MEqfDA (Thank @blackcodetech)
Size ; 1.13 GB
MD5 : 4F4D197A3141C6794AC7C15A28062488
...
...
Note : Recommend Wipe (system\data\dalvik and cache)
...
Please read completely 3 path
Install,Go back old backup,flash stock firmware
A. Install ROM
1. Download
- D802_PATCH_GO_LP_droidth.zip
http://bit.ly/1MX6U0l
- D802_PATCH_RETURN_KK_droidth.zip
http://bit.ly/1LJG52P
- ROM as link above
Then copy to SDCARD
- LP_Baseband_D805ByZbzG.zip (For D805 user only)
https://mega.co.nz/#!DdM0AZDA!o1gM4xWigcv3dyy4e7Ofz5589w7-iyfd9g9MjWBYFys
2. Reboot to Recovery
3. Backup your current ROM
4. Flash D802_PATCH_GO_LP_droidth.zip
5. In TWRP Bump MUST FULL Wipe (system\data\dalvik and cache)
6. Flash ROM
7. Flash LP_Baseband_D805ByZbzG.zip (For D805 only)
8. Reboot
Click to expand...
Click to collapse
B. Restore to your backup ROM.
How to Go back to KK (Install ROM or Restore KK image)
1. Reboot to Recovery
2. Flash D802_PATCH_RETURN_KK_droidth.zip
3. Go back to KK
3.1 Restore KK image
- Restore KK Image
3.2 Install KK Custom ROM
- wipe (system\data\dalvik and cache)
- Flash KK Custom ROM
4. Reboot
Click to expand...
Click to collapse
C. Go back to Stock firmware (without lost data in sdcard)
1. make sure your Backup ROM is stock LG 20A,20B,20C,20D,20F,20H or your current ROM is stock LG
2. Flash firmware KDZ
3. enter to system
4. enjoy
Click to expand...
Click to collapse
Thank,
kernel from acura2201 : http://www.htcmania.com/
Major Issue
- NFC Maybe not working (Not Stable)
Small Navigationbar .
Thanks, the guys in htcmania forum. http://www.htcmania.com/showpost.php?p=17860091&postcount=6
TIP
How to enable 4k ,and enable slow motion in SRKROM 2.1?
- Change build.prop (ro.product.model=LG-F350K) Then restart the phone.
BuildPrpp Editor App in playstore.
**** Change model will have effect (Wrong Model) for flash firmware KDZ/TOT
How to work with USBOTG.
- Plug USBOTG into G2 . USB OTG Helper it pop up
- Choose mount . Then it will be Mount Start at : /storage/UsbOtg/Drives
- You can use file manager app like root explorer ,es explorer or file manager to browse file in USBOTG
Can I dirty flash over the previous version or not recommended? Great work by the way very nice ROM?
saint_cow said:
Can I dirty flash over the previous version or not recommended? Great work by the way very nice ROM?
Click to expand...
Click to collapse
Not recommend dirty flash.
NFC is still not working. It is ok at first boot, but fail after reboot.
abc001 said:
NFC is still not working. It is ok at first boot, but fail after reboot.
Click to expand...
Click to collapse
Working more than 1 reboot .Maybe it's fail.I will investigate why ?
Thank you for your test.
Back LED not turning on when I unlock the phone by pressing power button.
Sent from my LG-D802 using XDA Free mobile app
Congratulations on your new thread. Rom is enough for daily use. Very smooth stable. I need everything works very well. We just need to FM radio. I congratulate you for this work and look forward to better then :good:
Nice ROM!
But I don't understand why sometimes (like in 1.0.2 version) this ROM have few but annoying lags for 10/15 seconds...any suggestions?
a little more battery life consumed on 2.1 compared to 1.02 ...
Hi!
somboons said:
Thank you for your test.
Click to expand...
Click to collapse
New mirror you can use this too.
http://uptobox.com/ascs9i9isy00
Handsfree speaker call not sound.
for Korean version?
Flashing methods on d802.
Coming frm simple rom v1.2.
Bugs report plz.
Heard Nfc backled does nt wrk?
Battery lyf?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shalz said:
Flashing methods on d802.
Coming frm simple rom v1.2.
Bugs report plz.
Heard Nfc backled does nt wrk?
Battery lyf?
Click to expand...
Click to collapse
Read instruction.
somboons said:
Read instruction.
Click to expand...
Click to collapse
I read it mahn.
So do a complete wipe excpt sd
Flash rom fr d802
Reboot
Ryt?
Nd wat abt back led during calls and some reboots?
All runing so good so far...only the incoming call tune.! Cant hear it ringing when receiving a call
crazylife said:
All runing so good so far...only the incoming call tune.! Cant hear it ringing when receiving a call
Click to expand...
Click to collapse
Do u mean can't hear phone ringtone ?
It work for me
Shalz said:
I read it mahn.
So do a complete wipe excpt sd
Flash rom fr d802
Reboot
Ryt?
Nd wat abt back led during calls and some reboots?
Click to expand...
Click to collapse
No some reboot .no back led .
Hello !
Stock Huawei Marshmallow for all devices : Huawei Ascend G8 (GX8) !
Not rooted, not deodexed ... not any other mods ... It's just stock Huawei Marshmallow Firmware B340 .
Can be installed on all G8 (GX8) version through TWRP .
Downloads :
Code:
* ROM : [URL="https://mega.nz/#!JBsHzTKR!qLWAS3PIVJQq2J4PUKupd36nOyrHCp-oWfglMExcLxM"]Huawei_MM.zip[/URL]
* Modem : [URL="https://mega.nz/#!JF1AFT4Q!kzZ-hZ8tSJhIxpiFEOUsg2o18kKuJGlbJWH9DeN8MZg"]Modem_MM.zip[/URL]
* Root : [URL="https://www.androidfilehost.com/?fid=24533103863142467"]SuperSU.zip[/URL] [B][I]md5 :[/I][/B] 419d48a14d8ae9f247cd9266e14ad8cf
Installations :
Code:
* install this version of [URL="http://forum.xda-developers.com/showpost.php?p=66171376&postcount=37"]TWRP[/URL]
* go to TWRP and wipe : dalvik-cache, cache, system & data !
* Install ROM & Modem
* reboot ( - [B][I]just ignore warning : No OS Installed[/I][/B] )
* go to TWRP and Install SuperSU if you need ROOT ( [B][I]warning : devcie will restart few times : do not worry[/I][/B] ! )
Partitions updated to MM : /system, /boot, /tz & /modem !
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Best regards !
*** reserved ***
You can be installed on the single Sim?
O-ROM said:
You can be installed on the single Sim?
Click to expand...
Click to collapse
Yes !
HELP me, please.. I d like unlock bootloader, can´t.
O-ROM said:
HELP me, please.. I d like unlock bootloader, can´t.
Click to expand...
Click to collapse
Please, keep thread on topic ... for further questions , please post here , thanks !
Thank you surdu_petru I hope this solves my problem I lost all my pics videos all data which is Important to me and my mother just for this
Sh*t sorry bout that because my data is important but since you provide this links my problems is solved I lost my files because I attempt installing the latest version in all ways= lost data my bad your images is not the one who causes me lost data
is this fot the dual sim or the single sim model?
Sent from my HUAWEI RIO-L01 using XDA-Developers mobile app
Flashed via sideload. Flash worked but shortly after initial setup screen would go scrambled.
Did a full wipe of all partions, and flashed modem, rom, su from ext sd card. Got stuck on huawei logo on first boot.
Did a full wipe of all partions, and flashed rom from ext sd card. got stuck on huawei logo.
ANy ideas?
Coming from cm 10.0
is it compatible with g8 rio-l01 dual sim b160? i want to make sure before trying
Sent from my HUAWEI RIO-L01 using XDA-Developers mobile app
rustynail1985 said:
is it compatible with g8 rio-l01 dual sim b160? i want to make sure before trying
Sent from my HUAWEI RIO-L01 using XDA-Developers mobile app
Click to expand...
Click to collapse
op:
Can be installed on all G8 (GX8) version through TWRP .
i am gonna try it now will post what will happen
---------- Post added at 10:44 AM ---------- Previous post was at 10:13 AM ----------
i installed the files when i start the screen flickers and no sim card detected , i flashed the modem too
what should i do ?
rustynail1985 said:
i am gonna try it now will post what will happen
---------- Post added at 10:44 AM ---------- Previous post was at 10:13 AM ----------
i installed the files when i start the screen flickers and no sim card detected , i flashed the modem too
what should i do ?
Click to expand...
Click to collapse
same here i cant pass initial setup because when i select language and tap next screen flickers
i did factory reset but no changes
edit : restored my 5.1 backup and now my fingerprint not work
also fingerprint option disappeared in settings
edit 2: i tried to flash my previous b160 update.app through force update to solve fingerprint problem but got error after 20% progress :crying::crying:
kralkral said:
same here i cant pass initial setup because when i select language and tap next screen flickers
i did factory reset but no changes
edit : restored my 5.1 backup and now my fingerprint not work
also fingerprint option disappeared in settings
Click to expand...
Click to collapse
yes its gone
anyone can help ???????????????????????????????
surdu_petru said:
Hello !
Stock Huawei Marshmallow for all devices : Huawei Ascend G8 (GX8) !
Not rooted, not deodexed ... not any other mods ... It's just stock Huawei Marshmallow Firmware B340 .
Can be installed on all G8 (GX8) version through TWRP .
Downloads :
Code:
* ROM : [URL="https://mega.nz/#!JBsHzTKR!qLWAS3PIVJQq2J4PUKupd36nOyrHCp-oWfglMExcLxM"]Huawei_MM.zip[/URL]
* Modem : [URL="https://mega.nz/#!JF1AFT4Q!kzZ-hZ8tSJhIxpiFEOUsg2o18kKuJGlbJWH9DeN8MZg"]Modem_MM.zip[/URL]
* Root : [URL="https://www.androidfilehost.com/?fid=24533103863142467"]SuperSU.zip[/URL] [B][I]md5 :[/I][/B] 419d48a14d8ae9f247cd9266e14ad8cf
Installations :
Code:
* install this version of [URL="http://forum.xda-developers.com/showpost.php?p=66171376&postcount=37"]TWRP[/URL]
* go to TWRP and wipe : dalvik-cache, cache, system & data !
* Install ROM & Modem
* reboot ( - [B][I]just ignore warning : No OS Installed[/I][/B] )
* go to TWRP and Install SuperSU if you need ROOT ( [B][I]warning : devcie will restart few times : do not worry[/I][/B] ! )
Partitions updated to MM : /system, /boot, /tz & /modem !
Screenshots :
Best regards !
Click to expand...
Click to collapse
I installed it now the screen keeps going scrambled like its broken
kralkral said:
same here i cant pass initial setup because when i select language and tap next screen flickers
i did factory reset but no changes
edit : restored my 5.1 backup and now my fingerprint not work
also fingerprint option disappeared in settings
edit 2: i tried to flash my previous b160 update.app through force update to solve fingerprint problem but got error after 20% progress :crying::crying:
Click to expand...
Click to collapse
rustynail1985 said:
yes its gone
anyone can help ???????????????????????????????
Click to expand...
Click to collapse
Fingerprint can be fixed only by flashing modem from 5.1 , because you restored your backup !
So, you should unpack UPDATE.APP from Huawei Android 5.1, extract modem.img and flash into TWRP mode !
Instructions :
* copy modem.img to MicroSD
* go to TWRP
* adb shell
# dd if=/external_sd/modem.img of=/dev/block/bootdevice/by-name/modem
huawei G8 said:
I installed it now the screen keeps going scrambled like its broken
Click to expand...
Click to collapse
Sorry, you can go to CM-13.0 or revert to stock Huawei 5.1 !
You can easily revert to stock 5.1, just put UPDATE.APP into your MicroSD/dload directory and try to keep pressed all three hardware buttons until device will start to update rom !
Good luck !
hi surdu.
with this method will the flickering screen and the initial setup problem be solve?
---------- Post added at 11:16 AM ---------- Previous post was at 11:08 AM ----------
surdu_petru said:
Fingerprint can be fixed only by flashing modem from 5.1 , because you restored your backup !
So, you should unpack UPDATE.APP from Huawei Android 5.1, extract modem.img and flash into TWRP mode !
Instructions :
* copy modem.img to MicroSD
* go to TWRP
* adb shell
# dd if=/external_sd/modem.img of=/dev/block/bootdevice/by-name/modem
Sorry, you can go to CM-13.0 or revert to stock Huawei 5.1 !
You can easily revert to stock 5.1, just put UPDATE.APP into your MicroSD/dload directory and try to keep pressed all three hardware buttons until device will start to update rom !
Good luck !
Click to expand...
Click to collapse
hi surdu.
with this method will the flickering screen and the initial setup problem be solve?
Same screen scrambled problem.
Please assist.
Sent from my HUAWEI RIO-L03 using Tapatalk
redimmer said:
hi surdu.
with this method will the flickering screen and the initial setup problem be solve?
---------- Post added at 11:16 AM ---------- Previous post was at 11:08 AM ----------
hi surdu.
with this method will the flickering screen and the initial setup problem be solve?
Click to expand...
Click to collapse
brukutu said:
Same screen scrambled problem.
Please assist.
Sent from my HUAWEI RIO-L03 using Tapatalk
Click to expand...
Click to collapse
If you have screen issue, you should go back to 5.1 ... please look a few posts above, I already answered how !
surdu_petru said:
If you have screen issue, you should go back to 5.1 ... please look a few posts above, I already answered how !
Click to expand...
Click to collapse
That doesn't help.
I don't think people with screen flickerig issues want to just revert back and that is it.
We want to get the new ROM working and not just revert back to 5.1
Sent from my HUAWEI RIO-L03 using Tapatalk