Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
don't use windows..
Ditto
dstenc said:
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
Click to expand...
Click to collapse
glen4cindy said:
Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Click to expand...
Click to collapse
I was able to gain root back using the toolkit. I flashed stock rom image I believe the ROM from the factory then flashed back stock recovery. Went back in after I updated and re-rooted to flash the triangle away. Now I need to unroot and after speaking with Sprint Rep on phone and trying a few things they advised me to take it to store to let them try it. I believe ALL of my problems started when I tried to use Mobile Odin Pro to flash the latest update to LJC (should I have been on stock recovery?). It started to flash then stopped and went into CWM recovery which is the recovery that the toolkit flashed. I for some strange reason was going to flash the update from there except I didn't have it in the right place on my sd card (couldn't access it GOD I'm a Dumbass!). God help me cause I'm too stupid to even understand what side loading is let alone how to do it. If some kind soul would take pity on me and pm me I could get a handle on the differences between HTC and Samsung. Anyway need to unroot now. Oh I keep seeing in the flash counter saying 1 but I'm on stock rom with stock kernel and stock recovery how do I get it to zero. Using triangle away. Anyway to check counter with stock recovery?
OH yeah does anyone keep getting "Internal Error Code 1500" in addition to the hardware id is missing?
Thanks to everyone that takes time to help idiots like me. I promise I CAN learn.
Charles
chrisc627 said:
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
Click to expand...
Click to collapse
Thank you...Unlike user: dstenc, the above procedure fixed my issue. As has been the case many times, XDA helpful users to the rescue!
:laugh: :good:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Could you walk me through your fix?
dstenc said:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Click to expand...
Click to collapse
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Could you walk me through your fix?
Mods please delete double post sorry
ceabbott2 said:
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Click to expand...
Click to collapse
I don't remember link. I googled so you might try that way.
Just FYI, even with older drivers I have sporadic Hardware ID Missing error, but far too less than with the latest version.
I'm posting this to keep it to the top of this board.
This is my second Note 2 in 2 weeks. I returned the first one because it stated Hardware ID missing, so within my first 2 weeks Sprint gave me a new one thinking that it was my phone. While at the Sprint store, and not yet rooted, we installed the unit and removed the unit 15 times to see if we could get it to have the Missing Hardware ID to pop up, it DIDN'T pop up once, so I thought I was good to go.
I came home and did the common root method that uses Galaxy Note 2 Toolbox. I IMMEDIATELY started getting the Missing Hardware ID again.
So now that we have it localized, what could be missing or creating a problem from the root procedure from the Galaxy Note Toolbox 2???
What I find really strange is that many are not experiencing this problem or they are just living with it.
I even tried the USB Switcher that appeared to install and does switch between Mass Storage and MTP, but although my PC makes the upward noise that sounds like it is installing and recognizing the USB Mass Storage, it doesn't end up recognizing it. It was ZATTA's build but he said it didn't work for his Galaxy 3 or Note 2 either.
Will anyone find a cure????
This will be no fun to have to deal with for the next 2 years.
Chime in PLEASE!!!!!! Even if it's only to insult me, I don't care if you have a cure.
Regards
Dave
if you do Google search, it's a known issue. From what I read, it's a driver issue. Some have had luck using the older Samsung USB drivers. You have downloand them, and install, and have your PC completely disconnected from the internet before plugging in your GN2 after the install. Appaarently the drivers on Microsoft's servers are bad; may be the wrong device.
I've done this, and still have the issue. I just find I don't have plug and unplug the USB cable as much.
What I have seen, the PC does connect to the GN2. It just doesn't recognize it as a storage device. It wants to use it as a modem, probably from the tethering capabilities with a USB OTG cable.
It may not be so much that it's not wide spread, but more that not everyone uses the GN2 as storage device or connects it their PC.
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
knightfox said:
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
Click to expand...
Click to collapse
Yep I think you may be on to something. Because when I rooted I tried both TWRP and CWM and then I had to go back to stock to get to apply the LJC update. Ever since I have had the chameleon error and Handsfree activation issues. Oh my counter always says 1 and I can't remove it with triangle away. I think it says custom binary yes and the counter says 1. I am using a laptop with Windows 7 and it now recognizes the device just can't stop the errors on start up.
Charles
Sent from my SPH-L900 using xda premium
Samsungs older drivers: uploaded.net/file/hdh0f1xd
UPDATE:Thanks to the hard work and diligence of XDA members @noobtoob, @ecs87, and recognized contributor @DocHoliday77, recognized developer @shabbypenguin, and others who will be added to this list after I go through some threads for their names -
It is my pleasure to announce that owners of the T-Mobile Samsung Galaxy Note 3 who have unfortunately hard-bricked
their device, (will not turn on, no led light, qhusb_download mode as device status when plugged into pc) are NOW able to boot their device using sd card mode, instead of expensive JTAG repair!!
noobtoob has been so kind as to ship me the sd card that he successfully flashed, with uncorrupted files from a working tmobile note 3, using odin! Thank you! These files contain all of the prerequisite files needed to boot in this state, to download mode! Once there, a stock firmware flash with ODIN will totally restore your device, just as the SM-N900A variant (at&t), and tmobile and sprint galaxy s3 hard-unbrick methods right here on XDA, can accomplish as I type!
Now, owners of this device can flash with alot more ease, and also this could not only lead to discovery of this method for the entire Note 3 series, perhaps other devices as well!
Read the thread! Why just look for a quick fix when you can actually learn more about the way file systems in android work - and what to avoid doing so that the chances of this happening in the future are less likely? I conducted quite a bit of research, and spoke to some very talented people to get this thread where it is - and to learn some new things myself. This thread contains alot of good insight and discussion about how to solve this issue. Perhaps you could learn something. Either way, all of what you need to fix a hard brick for these two devices is here.
[Update] 12/17/13]
I do in fact now have the sd card. Thanks @noobtoob! The device will not boot still.
I'm going to try a jig also.
[UPDATE] 12-21-13
Thanks to time, guidance, and commands from @shabbypenguin, we found the reason why the sd card noobtoob wrote the umbrick.img to will not boot. It is simply not large enough! So now thanks to proper guidance and this is from shabbypenguin, Tmobile Note 3 users are almost safe from a hard-brick!
If anyone deserves credit for this all, it is @shabbypenguin and @KAsp3rd, and ultimately Samsung, for at least programming their phones to be virtually fail-safe! Special thanks @zinnium to be the first to report this working for them! Thank You!
We have the new .img , so the proper method, and files will be in this post for all to use. For now, they are in this thread. Of course all contributors will be thanked. Give me a little time to get myself together here in the real world, this has happened so fast I've barely had time to keep up!!!!!
Pm me, or post if this method works for you. Now, I mean this only if you first are aware that **IF YOU FLASH ANYTHING OR USE THIS METHOD IT IS AT YOUR OWN RISK - I OR NO ONE ELSE IS RESPONSIBLE BUT YOU!!**
Also, only if you are simply using the very last unbrick.img posted by noobtoob, in this thread. It is ONLY FOR THE TMOBILE NOTE 3 SM-N900T VARIANT!!!! USING IT FOR ANY OTHER MODEL WILL NOT WORK!! THERE IS AN UNBRICK.IMG FOR THE SM-N9005 ALSO AT THE BOTTOM OF THIS POST! **AGAIN - ONLY USE THE .IMG THAT IS FOR YOUR SPECIFIC DEVICE!!!! YOU HAVE BEEN WARNED AND IT IS NOT MY RESPONSIBILITY IF ANYTHING GOES BAD!!!**
The file is 165mb in size, and needs to be written to a 32 or 64 gig sd card with Linux or another image writing tool, even using a CORRECT dd command in terminal emulator, with a rooted device. It has also been confirmed by XDA member zinnium to work with a 310mb system dump from of course - a WORKING T-Mobile Note 3. Also, XDA member aiti1980 has confirmed success with hard-unbricking the SM-N9005 model. The slimmer file does however, also contain all of the necessary partitions to correctly re-write improperly overwritten ones, including recovery!
Do not try to start a new thread and take credit for this!! This is the thread where this method started specifically for the t-mobile note 3 , and I take no credit for this method!!!! The real thanks should go to @shabbypenguin, and @KAsp3rd, who have brought this method, from unknown origins of my knowledge at the time of writing this - to XDA. @shabbypenguin has been kind enough to lend his expertise and time here in this thread, for the t-mobile note 3!! YAY Just in time for Christmas! Merry Christmas All!
UPDATE: 12/24/13 - Here's a Christmas gift for all SM-N9005 owners with a hard-bricked device...
aiti1980 said:
ooo! Thanks!!!
I use adb driver
into cmd win 7 i run:
ADB SHell
su
and you command and get unbrick.img
waiting for result...
I writting *.img on adata Microsd card from win 32 Disk Image
Update: WOW!!! My hard bricked phone power up!
Many thanks from RussiaЖ)))
Where me put unbrick.img: dropbox, or another service?
Click to expand...
Click to collapse
This method works for the SM-N9005 variant too! CONFIRMED!
One step closer for a universal hard-unbrick method for ALL
Galaxy Note 3 Models! HURRAH Special thanks to aiti1980 for being the first to try and succeed! Congrats!
MERRY CHRISTMAS!*
Note 3 SM-N900T unbrick.img
http://www.mediafire.com/?6nu61z43y51v3k4
Thanks to noobtoob for the above SM-N900T unbrick.img
https://mega.co.nz/#!UtNhgAja!XLL6Xy7qxW0L9t4ZgXgowHFNlSsLuz5RIQ-fQc5Ctxk
Thanks to aiti1980 for the above SM-N9005 Unbrick.img upload! ENJOY
Try using ODIN to flash back to stock. Then root using one of the available ways on XDA. Normally you install TWRP using Goo manager after root. It's that simple.
Sent from my SM-N900T using Tapatalk 2
NeoAndroid said:
Try using ODIN to flash back to stock. Then root using one of the available ways on XDA. Normally you install TWRP using Goo manager after root. It's that simple.
Sent from my SM-N900T using Tapatalk 2
Click to expand...
Click to collapse
I know that. I don't have a pc so I noticed on the twrp page that terminal emulator was an option, so I tried it.
Odin will not recognize the phone, how exactly do I use your method?
msmercy42 said:
I know that. I don't have a pc so I noticed on the twrp page that terminal emulator was an option, so I tried it.
Odin will not recognize the phone, how exactly do I use your method?
Click to expand...
Click to collapse
Recovery on the note 3 is actually on mmcblk0p15. So the issue is thankfully the partition you were trying to write to didn't have enough space to write.
If you change it to mmcblk0p15 you should be good. Or just install goo manager and install that way which is simplest. Should be option to install open recovery script.
Sent from my SM-N900T using xda app-developers app
chstewart said:
Recovery on the note 3 is actually on mmcblk0p15. So the issue is thankfully the partition you were trying to write to didn't have enough space to write.
If you change it to mmcblk0p15 you should be good. Or just install goo manager and install that way which is simplest. Should be option to install open recovery script.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
The help is much appreciated, however I cannot turn on the phone at all...
msmercy42 said:
The help is much appreciated, however I cannot turn on the phone at all...
Click to expand...
Click to collapse
You should be able to get into download mode still. Try pushing a new recovery with Odin. If still having issues Odin stock or you can also use kies to restore your phone....
Sent from my SM-N900T using xda app-developers app
Thanks for the help, I can't get the phone on at all though... it doesn't even recognize my device other than windows stating that it cannot recognize it, as it
malfunctioned.
Kies, will recognize it, even in this case?
Lastly, are you telling me that there is a way to push recovery with Odin even though the device is off, will not go into download mode, or recovery? If so, that's great!
Try with kies, best option as it will firmware reset your device back to stock.
Sent from my SM-N900T using xda premium
d12unk13astard said:
Try with kies, best option as it will firmware reset your device back to stock.
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
Thanks for the assist... will try kies as soon as I get to a PC in the morning. I honestly hope kies does the trick, PC stated it didn't recognize my device due to a malfunction.
I'll check the drivers also. Do you have any other suggestions? I just want to try every avenue avaiable. Again, thanks a lot.
msmercy42 said:
Thanks for the assist... will try kies as soon as I get to a PC in the morning. I honestly hope kies does the trick, PC stated it didn't recognize my device due to a malfunction.
I'll check the drivers also. Do you have any other suggestions? I just want to try every avenue available. Again, thanks a lot.
Click to expand...
Click to collapse
Update - I tried using Odin 1.85. I see the device being recognized in one of the ports, but flashing the stock firmware, or twrp yielded no results.
I tried reinstalling the Samsung drivers, nothing. I even tried Odin 3.07, and 3.09. Since the device will not power on, I guess that is why it will not work.
I then tried an emergency firmware recovery using kies. It did not detect the device, which is normal, so I disconnected and reconnected the device repeatedly,
with no success. I uninstalled an reinstalled kies, and that did nothing either.
I installed the android 4.3 sdk, and used adb in an attempt to recognize the device using commands like adb reboot recovery.
Adb replied with : no devices found.
I attempted through windows, to examine the ports, and found that there were different drivers present. The drivers installed on the PC were named QHUSB_DOWNLOAD 9008. When I first plugged the device to the PC, I noticed the device named as QHUSB_BULK, before changing to the above name, the same as the name for the drivers.
So my device is still alive.
Any advice? Can anyone help me get my phone on, at least into download mode? From there I can get it going. Please help if possible.
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
chstewart said:
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I tried everything. No, download mode is not working, though I agree that it should theoretically still. I am still trying the three button method.
Would a jig work? I am working on one. Any ideas besides that?
i was going to suggest a jig actually. if that doesn't work you're probably out of a phone. could try warranty since it's REALLY bricked they probably won't be able to tell, did it with T-Mo on my G1, said it stopped turning on.
Have you tried removing the battery and holding down all the buttons before reinserting the battery again. My phone wouldn't turn on once and this helped. If not call tmobile tell them all kinds of funky things are happening with your phone and it keeps turning off. Once they tell you to factroy reset your phone, act like you are following their instructions, then when they tell you to turn it back on, tell them it will now not even turn back on. They are so slow there & will send you out a new one you'll have in 24hrs. Trust me Ive had to do this numerous times due to ocd when it comes to phones and having to have reasons to return them for the slightest flaw. I returned my galaxy note 2 before i got this note 3 like 8x's & even returned it the wk before i bought my note 3 just to get 1 with all new parts if not maybe even a new phone so the note 2 i sold would be in practically new condition if not like i said brand new,lol. im sure someones gonna get all butt hurt and start talking about fraud,lol
In the future you can flash Twr using Goo on your phone with No computer. Use JRummy 's rom Toolbox pro.
Sent from my Nexus 4 using xda app-developers app
chstewart said:
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I agree, I simply followed the instructions on the twrp site, to flash recovery through terminal emulator.. I might have been off with the last number, and it obviously messed up my partitions... how did you get into recovery? The three button combo isnt working at all , no variation of it or battery pulls, or inserts have worked yet..
Also this is the place to get answers. Yet almost a thousand views but not even 20 posts. I know there is a way to fix this, can anyone share the fix?
msmercy42 said:
I agree, I simply followed the instructions on the twrp site, to flash recovery through terminal emulator.. I might have been off with the last number, and it obviously messed up my partitions... how did you get into recovery? The three button combo isnt working at all , no variation of it or battery pulls, or inserts have worked yet..
Also this is the place to get answers. Yet almost a thousand views but not even 20 posts. I know there is a way to fix this, can anyone share the fix?
Click to expand...
Click to collapse
It doesnt look good. I sent my vzw dev note 3 to Samsung with the same reboot problems and not being able to flash anything, and even they couldn't fix it.
Sent from my SCH-I535 using Tapatalk
msmercy42 said:
I used a command like : adb push*openrecovery-twrp-2.6.3.x-hltetmo.img*/sdcardadb shell dd if=/sdcard/openrecovery-twrp-2.6.3.x-hltetmo.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery, in terminal emulator to flash twrp. "Mmkblk0ps9" was at the end.
26081 files sent
26081filews recieved
write error : no space left
That is what I saw next. I tried it again, three times, but noticed that write error was not there, so I assumed it was successful.
I rebooted, as instructed, and now a totally bricked device. I saw " qhusb_download " plugging it into one pc. A laptop with windows 8 stated that windows cannot recognize the device because it has malfunctioned.
Can someone please help? This is a disaster... the sm-900a has a method here on xda that fixes this problem... is there a way to fix this on a tmobile note 3?
Click to expand...
Click to collapse
Sorry to hear! I'll save you a whole bunch of time, I did the same thing to my galaxy s3 while trying to upgrade my installed clockworkmod. Long story short the commands I entered into terminal emulator we're fine its just that I put the wrong memory block which apparently flashed the image to the wrong area of the chip. I rebooted the phone and nothing happened. When I plugged it into the PC I would get the same thing you're getting. After a ridiculous amount of time I managed to get my hands on the correct drivers and installed them and found that flashing a stock firmware through Odin was a waste of time.
You need to send your phone into Samsung and the only solution is a motherboard replacement. Or you can find someone locally who can do a JTAG mod for you. But doing so will definitely void your warranty. When I shipped my phone into Samsung I told them I was using the phone and all of a sudden it got very hot and turned off and wouldn't turn on. Back in the S3 days I had to wait 3 weeks to get my phone back repaired. But these days there now Samsung service centers everywhere so you can probably get replaced phone on the spot.
Sent from my SM-N900W8 using Tapatalk 4
Qhusb_bulk drivers??
msmercy42 said:
I used a command like : adb push*openrecovery-twrp-2.6.3.x-hltetmo.img*/sdcardadb shell dd if=/sdcard/openrecovery-twrp-2.6.3.x-hltetmo.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery, in terminal emulator to flash twrp. "Mmkblk0ps9" was at the end.
26081 files sent
26081filews recieved
write error : no space left
That is what I saw next. I tried it again, three times, but noticed that write error was not there, so I assumed it was successful.
I rebooted, as instructed, and now a totally bricked device. I saw " qhusb_download " plugging it into one pc. A laptop with windows 8 stated that windows cannot recognize the device because it has malfunctioned.
Can someone please help? This is a disaster... the sm-900a has a method here on xda that fixes this problem... is there a way to fix this on a tmobile note 3?
Click to expand...
Click to collapse
Hey, Any luck with restoring your device, at all?
I'm in a somewhat similar predicament, myself... I accidently Wrote a backup of my NV Data to the EFS... 0_o
The log of the process showed everything seemingly going well... After rebooting, however... Well, it never did...
Now I can't get into Recovery, ODIN, Normal boot, nor will plugging it in even charge the battery(No screen/led response)...
I see QHUSB_BULK under Unknown Devices (Win7-Ult-SP1_x32)... Can't for the Life of me find the drivers, though...
In fact, reliable old Google even only returns 5 results relevant to said driver, each of which being a post in this thread =D lmao... (so prolly will be 6 results, once I submit this post) But yeah, I'm at a complete loss....
I hope you were able to find a solution for your device. And I hope someone can help discover/produce one for mine as well...
Thank you, XDA and all it's Dev's/Members...
M1k3Carson1369 said:
Hey, Any luck with restoring your device, at all?
I'm in a somewhat similar predicament, myself... I accidently Wrote a backup of my NV Data to the EFS... 0_o
The log of the process showed everything seemingly going well... After rebooting, however... Well, it never did...
Now I can't get into Recovery, ODIN, Normal boot, nor will plugging it in even charge the battery(No screen/led response)...
I see QHUSB_BULK under Unknown Devices (Win7-Ult-SP1_x32)... Can't for the Life of me find the drivers, though...
In fact, reliable old Google even only returns 5 results relevant to said driver, each of which being a post in this thread =D lmao... (so prolly will be 6 results, once I submit this post) But yeah, I'm at a complete loss....
I hope you were able to find a solution for your device. And I hope someone can help discover/produce one for mine as well...
Thank you, XDA and all it's Dev's/Members...
Click to expand...
Click to collapse
Nothing yet....and I'm looking everywhere
for a system dump of the T-Mobile note 3, so I can maybe find the files needed for the fix.