After talking with a mod and Star Fighter we came to the agreement that another thread regarding CM11 is not needed.
Please refer to this thread for any feedback/bug report. Thank you
http://forum.xda-developers.com/showthread.php?p=48199636
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restores the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
For device specific changes use CMXlog
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/d802_Info
How To Install CyanogenMod
First time installing CyanogenMod 11 to your LG G2 (D802), or coming from another ROM:
- Read the official wiki
- Copy GApps and CM11 ZIPs to your phone
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM11 zip from sd_internal
- Flash GApps zip from sd_internal (if wanted)
- Reboot
- Restoring Apps + Data via Titanium Backup might cause problems and is not recommended, avoid it if possible.
Upgrading from earlier version of CyanogenMod 11:
- Copy CM11 ZIP to your phone
- Boot into Recovery
- Flash CM11 zip from sd_internal.
- Reboot
CM11 official nightly builds:
http://www.get.cm/?device=d802
Google Apps:
http://goo.im/gapps
ClockworkMod-Recovery:
Scroll down to LG G2
TWRP:
[GUIDE] INSTALLING TWRP on LG G2
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What's working
_ ART Works
_ No random reboots (need further testing)
Please provide feedback (including Stock camera & IR blaster functionality )
Bugs
_ Animations a bit laggy.
_ Immersion mode not working.
_ Settings to set roaming inside the home country is not available.
_ Echos during phone calls.
Please provide feedback
If reporting a bug please refer which nightly you are running. Thank you.
Device Specific Nightly Changelog
CMXLog: http://10.2.cmxlog.com/?device=d802
If you're going to reuse CM's work, which they are doing for free, be fair and give proper credits.
This is the only payment CM is really demanding and they deserve it to be mentioned because of the countless hours they've put into this project.
All Credits to CM Team. Please donate to them or press thanks. Please note I am not the G2's CM device maintainer.
Screenshots
Work in Progress
Thanks to StarFighter for his CM 4.3.1 thread from which I took most informations.
Yeah! It's official! Great present from Santa Claus!
Tapatalk-kal küldve az én LG-G2-el
Installed with TWRT 2.6.3.3. Installed ROM and then gapps dated 26th november. I enableb ART right after first boot. The system rebooted and optimized. All works fine. Maybe transitions are a bit laggy. If you turn them off then all is OK. You are able to change clock icon and setup quick settings. It does not have immersive mode. That is all I could check right out of my head.
Installation failed with TWRP 2.6.3.2. Gonna give it a try with CWM.
Edit
I had 2 different TWRP. Tried on the other one with same version. Working.
UI is bit laggy but it's great. Thanks CM Team.
---------- Post added at 12:12 PM ---------- Previous post was at 11:59 AM ----------
doctor78SI said:
Installed with TWRT 2.6.3.3. Installed ROM and then gapps dated 26th november. I enableb ART right after first boot. The system rebooted and optimized. All works fine. Maybe transitions are a bit laggy. If you turn them off then all is OK. You are able to change clock icon and setup quick settings. It does not have immersive mode. That is all I could check right out of my head.
Click to expand...
Click to collapse
At my end transitions are more laggy than the Unofficial CM11 build in the Orig Dev section. Have you tried that? Thanks.
http://forum.xda-developers.com/showthread.php?t=2495859
What's the difference?
Sent from my LG-D802 using XDA Premium 4 mobile app
Flashed with philz recovery over the unofficial build by vertigo. Worked flawless. Thanks a lot!
StarFighter said:
http://forum.xda-developers.com/showthread.php?t=2495859
What's the difference?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Minor ones really. As you can see I mentioned you at the bottom of the thread, thanking you. I would like to keep this specific for the international version D802 and CM11. Because your thread is under Original Development, it could mean that more variants are supported and discussed in the thread. Some bugs are device-specific and I would like it to keep this thread with only D802 bugs.
Moreover, your thread's discussion focuses on CM10.2. As I said, I would like to keep this CM11 only.
Hope it clarifies.
waleedshiekh said:
Installation failed with TWRP 2.6.3.2. Gonna give it a try with CWM.
Edit
I had 2 different TWRP. Tried on the other one with same version. Working.
UI is bit laggy but it's great. Thanks CM Team.
---------- Post added at 12:12 PM ---------- Previous post was at 11:59 AM ----------
At my end transitions are more laggy than the Unofficial CM11 build in the Orig Dev section. Have you tried that? Thanks.
Click to expand...
Click to collapse
doctor78SI said:
Installed with TWRT 2.6.3.3. Installed ROM and then gapps dated 26th november. I enableb ART right after first boot. The system rebooted and optimized. All works fine. Maybe transitions are a bit laggy. If you turn them off then all is OK. You are able to change clock icon and setup quick settings. It does not have immersive mode. That is all I could check right out of my head.
Click to expand...
Click to collapse
Thanks guys. Can I have some screenshots as well?
Screenshots are more or less the same as CM 10.2. Icons are different (KK) and status bar has white fonts (also KK). Other than that it is the same.
---------- Post added at 02:11 PM ---------- Previous post was at 01:57 PM ----------
BUG: when I am talking with ppl they complain that they hear echos. This does not occur on PA 4.0 . Flashed back PA 4.0 12/06 and all is fine.
Just found this thread... Posted in vertgos cm11 thread but.... Here's my issue... Flashed via the cm updater in Vertigos latest cm11 and everything went smoothly... but now I'm not seeing my camera or gallery app..hangouts and a few other apps are missing as well
Sent from my LG-D802 using xda app-developers app
Nice seeing this actually happened
Really looking forward to it, hoping it will soon include the4.4.1 too
Sent from my LG-D802 using xda app-developers app
Such fast progress from awesome devs thank you for your hard work, I can't wait to flash this when it becomes a bit more stable.
On that note, how is battery life compared to CM10.2?
had to upgrade twrp to .3.3 before flashing would work
Awesome work :good: Hope the bugs get fixed soon
Cant´find any bug so far. No echo, FC, delay in calls. Going to test battery but I am worried it won´t be better than stock rom.
Gapps link isnt usefull cause 4.4 gapps are not avsilable in gapp page.
Roms are to nightly and buggy...to many errors
Sent from my LG-D802 using xda app-developers app
Device D802
ROM cm-11-20131206-NIGHTLY-d802.zip
GAPPS PA 4.4
Clean Install with TWRT 2.6.3.3
When I move out of WiFi range it still shows as "Connected to Wifi", does not rejoin when I get back into range.
Can ONLY manually rejoin after reboot.
***
Great job and thanks a million! Loving the work! :victory:
pxius said:
Device D802
ROM cm-11-20131206-NIGHTLY-d802.zip
GAPPS PA 4.4
Click to expand...
Click to collapse
Those are Paranoid Android Gapps. Not suitable for pure cm.
Sendt fra min LG-D802 med Tapatalk
After talking with a mod and Star Fighter we came to the agreement that another thread regarding CM11 is not needed.
Please refer to this thread for any feedback/bug report. Thank you
http://forum.xda-developers.com/showthread.php?p=48199636
xodeus said:
Those are Paranoid Android Gapps. Not suitable for pure cm.
Sendt fra min LG-D802 med Tapatalk
Click to expand...
Click to collapse
Lol what are you on about. Pa gapps are just fine , like any other gapps.
Sent from my LG-G2 using Tapatalk
Now why did you change the thread name to unofficial nighties? I know you and startfighter both have threads but still the OP links to the official nightly builds
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 9.0 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 9?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info to our bug tracker:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest version: cm-9.0.0-KalimAz 9.0
Download CM10 v0.2: link ( MIRROR )
Download CM9: link
Mirror: link
MD5sum: 6f0a03f9d1b347669b7017058ade7c75Night Builds can be found here: http://get.cm/?device=maguro ChangeLog: http://changelog.bbqdroid.org/#maguro/cm9/next
Google Apps addon: ( Only for CM9 )
Version: gapps-ics-20120317
Mirror: link
Mirror: link
TO MAKE A CLEAN INSTALL. LOOK HERE:
Reboot into Recovery
Make a backup ( optional to be able to go back anytime )
Wipe data/factory reset
Wipe cache partition
Then flash the Android ROM
Then flash Gapps
REPORT ISSUES ONLY IF:
You made a clean intall
You use the default kernel
You have not installed new framework
You have confirmed the issue is there with default CPU speed
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
What is new:
CM9
V9.0:
Kernel is fully converted from 4.1. Be carefull, kernels from ics are not compatible with that ROM.
Options to remove sound from camera ( focus and shot )
Added an option into camera to select the time to wait after Touch top focus before the next autofocus
You can install from ROMManager
Torch Enabled
...
CM10
V0.1:
1st version.
...
V0.2:
Camera now works right. Fist time you boot open first gallery to allow this ap to make all cache from your photos. After you can enable camera otherwise 1st time will take long to start the camera.
Camera video working too
NFC working and all the rest of the hardware
Added T9 to call.
Added Torch.
...
Is it based on 4.1
darrenng_ff said:
Is it based on 4.1
Click to expand...
Click to collapse
Kernel is based on 4.1 and merged with all the CM kernel features.
ROM is based on ics with few additions from jellybean.
As soon as I have more sources I will implement more from jellybean.
Yes ! Welcome Kalim to Gnex ! I loved your work for Nexus S, so good to see you here.
kptnk said:
Yes ! Welcome Kalim to Gnex ! I loved your work for Nexus S, so good to see you here.
Click to expand...
Click to collapse
Thanks.
I will try to do the same as I am doing in nexus S. Maenwhile maintaining Nexus S and Galaxy Nexus on CM I will also make some intermediate releases like the nightbuilds but fully tested by my testers so you can have some early stages of all we are doing at CM.
Kalim
KalimochoAz said:
Thanks.
I will try to do the same as I am doing in nexus S. Maenwhile maintaining Nexus S and Galaxy Nexus on CM I will also make some intermediate releases like the nightbuilds but fully tested by my testers so you can have some early stages of all we are doing at CM.
Kalim
Click to expand...
Click to collapse
That's great and very much appreciated
Thanks for your work!
john9 said:
Thanks for your work!
Click to expand...
Click to collapse
np, thanks
great work bro!
will test
I got a few questions though:
1) which features did you merge in from jb?
2) why should we use the 20120317 gapps and not the latest (20120429) ?
Keep going!
m4gic said:
great work bro!
will test
I got a few questions though:
1) which features did you merge in from jb?
2) why should we use the 20120317 gapps and not the latest (20120429) ?
Keep going!
Click to expand...
Click to collapse
1.- graphic and radio ports.
2.- because it the version whitch we have done the tests.
Thx. Will give a try today.
Hi KalimochoAz (you are CM maintainer of NS/GN, afaik )
1. CyanogenMod composed of full JellyBean CM"10"?
2. from now on, you release manual build here?
Welcome kalim,
Love your work for the nexus s. Always reliable. Will now test jb Rom. Thanks!
Sent from my Galaxy Nexus using xda premium
daskalos.healing said:
Hi KalimochoAz (you are CM maintainer of NS/GN, afaik )
1. CyanogenMod composed of full JellyBean CM"10"?
2. from now on, you release manual build here?
Click to expand...
Click to collapse
Just follow the thread and you will see what is posted and when.
daskalos.healing said:
Hi KalimochoAz (you are CM maintainer of NS/GN, afaik )
1. CyanogenMod composed of full JellyBean CM"10"?
2. from now on, you release manual build here?
Click to expand...
Click to collapse
1.- this is not fully jb build. When we see all the code will be the moment to decide if this will be an extension of cm9 or a new version, not I can't really tell you what will be.
2.-If you ask for how to build yourself cm9, this is the manual: http://wiki.cyanogenmod.com/wiki/Galaxy_Nexus_(GSM):_Compile_CyanogenMod_(Linux)
Kalim
LuvinN1 said:
Welcome kalim,
Love your work for the nexus s. Always reliable. Will now test jb Rom. Thanks!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I hope you like the same work in here
KalimochoAz said:
I hope you like the same work in here
Click to expand...
Click to collapse
I also enjoyed your work on the Nexus S. Glad to see you here.
I have something weird going on. I'm running JB stock and I can view the 2nd page of this thread but not the first. Tapatalk will force close. No other threads do this on any other page. Could someone post the link to the download or loads of this ROM on page 2 or 3 so I can download it. My computer is at work and I want to try this one
Sent from my Galaxy Nexus using Tapatalk 2
dhollis72 said:
I have something weird going on. I'm running JB stock and I can view the 2nd page of this thread but not the first. Tapatalk will force close. No other threads do this on any other page. Could someone post the link to the download or loads of this ROM on page 2 or 3 so I can download it. My computer is at work and I want to try this one
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I had the same problem - press settings, then select web view and it will open the thread in your browser.
Sent from my Galaxy Nexus using Tapatalk 2
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/D710_Info
INSTALLATION
Click to expand...
Click to collapse
First time installing CyanogenMod 10.1 to your Epic 4G Touch, or coming from another ROM:
- Copy GApps and CM 10.1 zip's to your internal SD Card
- Make sure you're NOT RUNNING A KERNEL WITH THE MMC-SUPERBRICK-BUG
- Make sure you're running a proper working ClockworkMod-Recovery
- Make sure you're not running a JB modem
- Boot into recovery
- Flash CM 10.1 zip from internal SD Card
- Flash GApps zip from internal SD Card
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.1:
- Copy CM 10.1 zip to your internal SD Card
- Boot into recovery
- Flash CM10.1 zip from internal SD Card
- Reboot
Upgrading from CyanogenMod 9:
- Copy 4.2.2 GApps and CM 10.1 zip's to your SD Card
- Boot into recovery
- Flash CM 10.1 zip from SD Card
- Flash GApps zip from SD Card
- Reboot
DOWNLOAD
Click to expand...
Click to collapse
CM 10.1 official nightly builds:
http://www.get.cm/?device=d710
Google Apps:
http://goo.im/gapps
CHANGELOG
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z
http://changelog.bbqdroid.org/#/d710/next
DONATIONS
Click to expand...
Click to collapse
If you want to donate a few bucks for the work:
Thanks to all donators!
First! Thanks Dastin, you are the man! Now go relax with your amazing girlfriend lol.
Sent from my SPH-D710 using xda premium
Nicely done bro!
Sent from my SPH-D710 using xda app-developers app
Wait.... WHAT!
Mind.. Blown.
Sent from my SPH-D710 using Tapatalk 4
It looks like the change log is pointing to the wrong branch, shouldn't it be http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.1,n,z ??
Sent from my SPH-D710 using xda premium
Well i stayed up to install it. So far so good. I was holding out on an older WFTN build one before many people started having wifi and data issues.
GPS 3G, 4G, WIfi all working well so far. Won't really know for a day or two. Can't be sure of anything but my initial impressions are good.
Whoa!! Thank you! Great Job man!
official! better late than never, amazing work dastin
Sent from my HTCONE using Tapatalk 2
=]
Congrats buddy, Good job. But i don't get why i cant find it under devices on the cya site?
Edit: Did any drastic changes or anything really change from unofficial? JB modems do work with 4g ONLY no 3g support
http://dl.xda-developers.com/attach.../9/0/6/7/5/Screenshot_2013-08-15-10-34-02.jpg
thanks for getting our phone recognized....Finally!!! Great job bro!
Great Work. I have been waiting for this day!
Side Note as I see it was asked, there is no data while on JB Modem. We know this to be true because, Dastin hasnt mentioned it as a fix in WFTN Build as of yet. Also, just to confirm. I flashed a JB modem and come to a result with no data.
=]
Thanks, i didn't see it in op to not use a modem and i thought that was the requirement for it to become a CM official rom.
elzero26 said:
Great Work. I have been waiting for this day!
Side Note as I see it was asked, there is no data while on JB Modem. We know this to be true because, Dastin hasnt mentioned it as a fix in WFTN Build as of yet. Also, just to confirm. I flashed a JB modem and come to a result with no data.
Click to expand...
Click to collapse
woooo
JB modems do work. proof is in the pudddin (4g only)
http://dl.xda-developers.com/attach.../9/0/6/7/5/Screenshot_2013-08-15-10-34-02.jpg
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Pretty sure WFTN will be dead as hes going to continue to work on this rom and tweak it to make it perfect. With it being official i assume hell be getting alot more assistance from the cya community which will be great! other more exp people will have to elaborate more than me
darklavalizard said:
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Click to expand...
Click to collapse
darklavalizard said:
So just for the record, how will WFTN differ from these nightly releases now since we have official support?
Click to expand...
Click to collapse
Had exactly the same question.
Really nice work btw. Will likely be moving away from this device soon but will certainly keep running your builds on it as it'll make a good play/backup device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
papertown11 said:
Pretty sure WFTN will be dead as hes going to continue to work on this rom and tweak it to make it perfect. With it being official i assume hell be getting alot more assistance from the cya community which will be great! other more exp people will have to elaborate more than me
Click to expand...
Click to collapse
My understanding was that official cm builds needed to remain pretty "pure" while wftn would give the flexibility to add whatever tweaks dastin wants. I've asked the same question and may be making all of this up. So I'll let dastin tell us for sure.
All up to dastin for sure. I don't know why he'd wanna start adding tweaks and halos and stuff when he was going for pure and clean before but if he wants to start dabbling with wftn like that he can but as he always says he doesn't have much time so i figured he'd pretty much drop it and move on to full support of this i may be wrong but hell be the only one to answer it.
gg_99 said:
Had exactly the same question.
Really nice work btw. Will likely be moving away from this device soon but will certainly keep running your builds on it as it'll make a good play/backup device.
---------- Post added at 09:56 AM ---------- Previous post was at 09:52 AM ----------
My understanding was that official cm builds needed to remain pretty "pure" while wftn would give the flexibility to add whatever tweaks dastin wants. I've asked the same question and may be making all of this up. So I'll let dastin tell us for sure.
Click to expand...
Click to collapse
OK flashed the Nightly and keyboard force closes the whole time. Can't type anything including my Google account. MD5 sum matches though. Well, it's 1:30 in the morning here so I'll just continue tomorrow. Just a heads up.
Sent from my Nexus 7 using Tapatalk 2
=]
I've actually set up fresh 3 times and it works perfect for me . Do your standard wipe factory/ wipe dev cash then reload gapps and you should be fine. Load a gb modem too you should be gtg
sol_671 said:
OK flashed the Nightly and keyboard force closes the whole time. Can't type anything including my Google account. MD5 sum matches though. Well, it's 1:30 in the morning here so I'll just continue tomorrow. Just a heads up.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Useful Links
Unofficial changelog
jfltexx CyanogenMod wiki
Jira issue tracker
DO NOT REPORT BUGS FOR NIGHTLY BUILDS!
Other Issues?
Before posting on this thread, make sure of a few things:
Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsImNvbS50b3J0ZWwuc3lzbG9nIl0
Download Links
CyanogenMod:
Unified Nightly: http://download.cyanogenmod.org/?device=jflte&type=nightly
Google apps addon:
Download: http://wiki.cyanogenmod.org/w/Google_Apps
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11.0 Nightlies for the Qualcomm Intl Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
invisiblek
Version Information
Status: Testing
Created 2013-12-07
Last Updated 2014-06-23
Wifi Issues?
See here: http://forum.xda-developers.com/showpost.php?p=42384912&postcount=101
Thanks will test
Sent from my GT-I9505 using Tapatalk
Is there a new cwmr that doesn't have reboot issues on 9505g?
Not seeing the 4.4 GApps on Goo.im main page yet. Is there a recommended package to use until the "official" one is released?
Edit: Nevermind, http://invisiblek.org/gapps/ works.
time to test
---------- Post added at 12:03 AM ---------- Previous post was at 12:01 AM ----------
Chahk said:
Not seeing the 4.4 GApps on Goo.im main page yet. Is there a recommended package to use until the "official" one is released?
Click to expand...
Click to collapse
OP posted a mirror above - http://invisiblek.org/gapps/
+1
Flashed and testing... will report back!
:good:
Edit:
So far everything works fine. Also restoring my apps with TB worked.
SuperSu does not work for me, but included Superuser works!
aye... is damn late... anyway... nice heads up
seems to be working flawlessly, but there is one thing i am concerned about:
the cyanogenmod does not retrieve the wifi list and doesn't download the apps that i have previously had, even the ones i had installed on the previous nightly. It is only so while on the cyanogenmod. If i flash a stock rom with odin, the whole backup retrieval will work no matter what
anyone experiencing such an issue ?
Any ScreensShot guys?
This CM11 will have google sarch with laucher as N5?
L.F.B. said:
Any ScreensShot guys?
This CM11 will have google sarch with laucher as N5?
Click to expand...
Click to collapse
See CM 11 on youtube and then come back here.
This is just the ROM that I have been looking for!!!!! Tested & it's really fast. CM Team, thanks for your hard work guys.....
Sent from my GT-I9505 using Tapatalk
Still in early testing...
After a clean installation of CM11, my 64GB microsdxc can be detected (exFAT), but available space is 0.
in the mean time i must replace this with FAT32 format sdcard, and things work fine now.
cshuwing said:
After a clean installation of CM11, my 64GB microsdxc can be detected (exFAT), but available space is 0.
Click to expand...
Click to collapse
My 64GB exFAT card isn't being recognized at all
just flashed, clock doesnt work, crash when i open it
fedef12evo said:
just flashed, clock doesnt work, crash when i open it
Click to expand...
Click to collapse
working here
1902 said:
See CM 11 on youtube and then come back here.
Click to expand...
Click to collapse
Can you please post the link for this official CM11?
I only see a bunch of CM kitkat name but neither one are this official dev.
Hi,
Which gaaps is recommended ?
On the goo web site, there is no kitkat version, only 4.3 jelly bean version
Thanks
Olivier
L.F.B. said:
Can you please post the link for this official CM11?
I only see a bunch of CM kitkat name but neither one are this official dev.
Click to expand...
Click to collapse
http://download.cyanogenmod.org/?device=jfltexx&type=nightly
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for the Asus TF300T with or without dock.
Special thanks to: XpLoDWilD, bumble-bee (for tf201 device tree from which this original tree was inspired), loganmc10, dasunsrule32, jruesga, cyanogenmod, pawitp, etc.....
recent changelog:
- DRM with widevine fixed (that makes google play movies work). Thx go to stargo!
Older changelog:
- f2fs added
Changelog for version 0.2:
- resync with CM-12
- sync kernel with lots of stuff from grouper (and/or thoemy's endeavoru).
Chris
Not working:
- dock battery status
- GPS orbit downloads
- some dock keys (including wake up by pressing dock keys)
Installation instructions:
- put zip on sdcard
- reboot to recovery (seems that you have to first: unmount /data).
- flash zip
- wipe (have not tried if upgrade from kitkat works and won't test this anyway)
For newer updates with CM updater and/or if you want f2fs, you might need a new recovery. Here is the cm recovery from 5-FEB-2015: recovery-cm-5-FEB-2015.img
Flash this with:
adb reboot bootloader
fastboot flash recovery recovery-cm-25-JAN-2015.img
fastboot reboot
Chris
CM12!
Get ready to flash!
Definitely worth a flash.
Dear chris,
Is it work on canvas 2 plus????
Chipset is mtk6589..
Waiting for your reply...
If not please work on this...
Thanking you..
I tried to encrypt the device. I Let it run for ~3 hours. Stuck on boot.
But great start
EDIT: SO Ill start testing this ROM now
Got my first reboot. And RIGHT now in this time of this writing my second reboot
Here is the first log. Second to come.
EDIT2: Second log added
Any developpement
@chrmhoffmann
I see you uploaded a huge bunch of patches for CM12. Thank you very much for all your efforts
[GER]Roxxor said:
@chrmhoffmann
I see you uploaded a huge bunch of patches for CM12. Thank you very much for all your efforts
Click to expand...
Click to collapse
No prob. I just re-synced the kernel with stuff from grouper. Those things are not really necessary for cm-12.0
EDIT: there's a new 0.2 version that has recent changes.
Chris
willing to try
I loaded the Omni version which worked but was a little slow - using ART not DALVIK. If anyone else tries this, I found the experience was interesting - you will have to choose a small(er) version of GAPPs to fit on the system partition. I used the version on the XDA PA-GAPPs site that was just over 200 MB in size. I'm back using CM11 because I use this puppy every day.
Official cm12 is out but no tf300
Selinux is not in enforced mode so I can't enable nightlies. That's a must for cm now. If any one can help me on that...
Chris
hi, just had a go with the rom seems very good but i couldnt connect to the internet, keep up the good work
thanks
chrmhoffmann said:
Selinux is not in enforced mode so I can't enable nightlies. That's a must for cm now. If any one can help me on that...
Chris
Click to expand...
Click to collapse
And how was that in cm11 then?
Sent from my TF300T using XDA Premium 4 mobile app
androidjel said:
And how was that in cm11 then?
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It was not a hard requirement to have Selinux enabled in cm-11.0. It is now a minimum requirement from CM.
BTW: I have fixed the major selinux denials now and the tf300t is now accepted on the official CM nightlies.
Chris
Since I installed cm snapshot 12 it won't appear any nightlies updates.. How can I search them with the cm updater?
igoigo said:
Since I installed cm snapshot 12 it won't appear any nightlies updates.. How can I search them with the cm updater?
Click to expand...
Click to collapse
Download a nightly and place it in the cmupdater folder. Go to your updater and flash the nightly that shows up. After reboot you will see nightly's again.
chrmhoffmann said:
It was not a hard requirement to have Selinux enabled in cm-11.0. It is now a minimum requirement from CM.
BTW: I have fixed the major selinux denials now and the tf300t is now accepted on the official CM nightlies.
Chris
Click to expand...
Click to collapse
So we will see cm12 official nightlies appear on cyanogenmod.org soon?
counterfeit187 said:
So we will see cm12 official nightlies appear on cyanogenmod.org soon?
Click to expand...
Click to collapse
Ones just finished being built downloading now
Thank you guys, for the awesome work you do!!!
Edit: Is there an installation guide?
I cant seem to get this to clean install
ricktendo said:
Thank you guys, for the awesome work you do!!!
Edit: Is there an installation guide?
I cant seem to get this to clean install
Click to expand...
Click to collapse
What's the issue? You should be able to flash this with the existing CWM recovery (from the CM11 thread).
Chris
CyanogenMod 13.0 is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Requirements
* You must read this post completely
* You must have flashed a stock MM update to update the firmware to a version that is compatible with these builds. Search xda for the best way to do so for your device.
* You must use the search first and make sure your question has not been answered yet!
Important note:
Stock Firmware B360 is known to cause bootloops!
All others might work, please do not ask in here how to up- or downgrade!
Known Issues
* See the official wiki
* See a webarchive-extract of the post above: wiki page in archive
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates us more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), use adb or any other file explorer tool to pull a copy of
/sys/fs/pstore/console-ramoops (command: adb pull /sys/fs/pstore/console-ramoops)
after the reboot and provide that.
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Download Links
Note:
As of 24th of december, the CyanogenMod infrastructure was shut down.
To further provide you with updates please use the unofficial downloads provided @
http://download.crpalmer.org/nightlies/kiwi-cm-13.0/
(Built from clean source)
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version. (make sure to use 64bit when using other packages), others might also be working
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Changelog (for both, official and unofficial builds!)
* Gerrit (All)
* Device tree
* Kernel
Note: First link contains ALL changes which are made to generic CM13 as well as specific (those are in red color) device items.
Generic items do NOT neccessarily apply to the device!
Important note
This is a development thread. This means it is NOT your personal support thread.
Questions about anything not related to CM13 on kiwi will not be accepted nor be answered.
This includes topics like going back to stock, problems with third-party apps (e.g. Snapchat), ...
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Honor 5X
Contributors
crpalmer, BadDaemon
Source Code: https://github.com/CyanogenMod/android_kernel_huawei_kiwi
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MM Stock Firmware
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-08-02
Last Updated 2017-01-06
Reserved
If all goes well, in the next run of builds on the CM servers you will be now getting official updates.
When that happens, I'll turn off my unofficial builds and request that the unofficial thread be closed to avoid confusion.
The official builds should be exactly the same with a few minor points:
* You no longer have to trust that I'm not evil and doing something nasty to your builds because a neutral third party is building them. Don't worry, I wasn't doing anything to the builds but keep that in mind when flashing random builds...
* You will now be able to download OTA updates.
* You will now be able to get changelogs (via cmxlog.
The only real negative is that my builds tend to be more predictable because I'm building only a handful of devices instead of running a much larger build system like CM does. If a build is slow, don't worry it will come...
Wow, that's great news! Thank you so much for all of your hard work, we really appreciate all the time and effort you put into making this project grow to become a success!
I hope others will also understand the painstaking steps you go through to add or resolve any issue instead of outright demanding a feature in the future. (you know exactly what I'm talking about, I won't even mention those dreaded words that you have ignored.) You deserve a medal, man.
New to the honor thanks for this love cm!!!
Sent from my KIW-L24 using Tapatalk
Assuming its still a nightly, will we be able to just dirty flash the official build over the unofficial build with no problem? Or will we need to do a clean flash.
Also Amazing work guys!
I am running 21/7/16 build whether shall I flash official build over unofficial?
Sent from my KIW-L22 using XDA-Developers mobile app
---------- Post added at 03:52 AM ---------- Previous post was at 03:50 AM ----------
Which is the official build August 1 or 2?
Sent from my KIW-L22 using XDA-Developers mobile app
Dayum. Now it's official. Gonna flash this when I come home. @crpalmer is one amazing dude. And also @BadDaemon of course.
Sent from my KIW-L22 using XDA Labs
great !
So did this mean we're gonna get OTAs??
Great work by the way @crpalmer @BadDaemon
@Lonath: The same as in the unofficial thread applies here: You have to READ and SEARCH before posting.
See the third!!! post for your answer! And just to add: I won't accept as many stupid posts again and will talk to the mods if there's smth we can do against that, once I get annoyed further....
@Sasi4385: None of the builds on crpalmer's server are the official ones, none has been built yet. The link will be updated to somewhere at downloads.cyanogenmord.org where the official ones will be available soon
@bullet25: You are lucky that currently it's only a switch of build server (crpalmer -> cyanogenmod server) so it's basically the same as before, just the download source will change (as soon as an official build is online)
BadDaemon said:
@Lonath: The same as in the unofficial thread applies here: You have to READ and SEARCH before posting.
See the third!!! post for your answer! And just to add: I won't accept as many stupid posts again and will talk to the mods if there's smth we can do against that, once I get annoyed further....
@Sasi4385: None of the builds on crpalmer's server are the official ones, none has been built yet. The link will be updated to somewhere at downloads.cyanogenmord.org where the official ones will be available soon
@bullet25: You are lucky that currently it's only a switch of build server (crpalmer -> cyanogenmod server) so it's basically the same as before, just the download source will change (as soon as an official build is online)
Click to expand...
Click to collapse
Tnx for the info Micheal
Sent from my KIW-L22 using XDA-Developers mobile app
---------- Post added at 08:57 AM ---------- Previous post was at 08:52 AM ----------
BadDaemon said:
@Lonath: The same as in the unofficial thread applies here: You have to READ and SEARCH before posting.
See the third!!! post for your answer! And just to add: I won't accept as many stupid posts again and will talk to the mods if there's smth we can do against that, once I get annoyed further....
@Sasi4385: None of the builds on crpalmer's server are the official ones, none has been built yet. The link will be updated to somewhere at downloads.cyanogenmord.org where the official ones will be available soon
@bullet25: You are lucky that currently it's only a switch of build server (crpalmer -> cyanogenmod server) so it's basically the same as before, just the download source will change (as soon as an official build is online)
Click to expand...
Click to collapse
Whether this one is a release (snap) build or nightly build?
Sent from my KIW-L22 using XDA-Developers mobile app
Sasi4385 said:
Tnx for the info Micheal
Sent from my KIW-L22 using XDA-Developers mobile app
---------- Post added at 08:57 AM ---------- Previous post was at 08:52 AM ----------
Whether this one is a release (snap) build or nightly build?
Sent from my KIW-L22 using XDA-Developers mobile app
Click to expand...
Click to collapse
@Sasi4385: The same as for Lonath applies to you: READ and SEARCH. The info is in the first post (and to help you one more time: one of the very last lines!)
Lonath said:
So did this mean we're gonna get OTAs??
Great work by the way @crpalmer @BadDaemon
Click to expand...
Click to collapse
Read the post m8!!!
Wowie. Incredible work! Thanks everyone involved!
Tnx everyone for making the rom.flashed the nightly build from download.cyanohenmod flashed cyanogen recovery and the rom but sometimes randomly phone reboots
Sent from my KIW-L22 using XDA-Developers mobile app
Reboots on 02Aug2016 nightly
Sasi4385 said:
Tnx everyone for making the rom.flashed the nightly build from download.cyanohenmod flashed cyanogen recovery and the rom but sometimes randomly phone reboots
Click to expand...
Click to collapse
I can confirm the message above. I tried updating OTA from the 01Aug2016 unofficial and it happened. Then I wiped everything and did a clean install with OpenGapps on top. It happened just the same.
For me, the reboot trigger is pressing "back" to return from an app into the home screen.
Sasi4385 said:
Tnx everyone for making the rom.flashed the nightly build from download.cyanohenmod flashed cyanogen recovery and the rom but sometimes randomly phone reboots
Sent from my KIW-L22 using XDA-Developers mobile app
Click to expand...
Click to collapse
neumannrf said:
I can confirm the message above. I tried updating OTA from the 01Aug2016 unofficial and it happened. Then I wiped everything and did a clean install with OpenGapps on top. It happened just the same.
For me, the reboot trigger is pressing "back" to return from an app into the home screen.
Click to expand...
Click to collapse
Where are you finding it on the Cyanogenmod site. As far as I can tell it isn't up there yet.
Sasi4385 said:
Tnx everyone for making the rom.flashed the nightly build from download.cyanohenmod flashed cyanogen recovery and the rom but sometimes randomly phone reboots
Click to expand...
Click to collapse
neumannrf said:
I can confirm the message above. I tried updating OTA from the 01Aug2016 unofficial and it happened. Then I wiped everything and did a clean install with OpenGapps on top. It happened just the same.
For me, the reboot trigger is pressing "back" to return from an app into the home screen.
Click to expand...
Click to collapse
Using the August 1 nightly for about a day now. Not even a single random reboot occured.
Sent from my SM-T110 using XDA Labs
crpalmer said:
If all goes well, in the next run of builds on the CM servers you will be now getting official updates.
When that happens, I'll turn off my unofficial builds and request that the unofficial thread be closed to avoid confusion.
The official builds should be exactly the same with a few minor points:
* You no longer have to trust that I'm not evil and doing something nasty to your builds because a neutral third party is building them. Don't worry, I wasn't doing anything to the builds but keep that in mind when flashing random builds...
* You will now be able to download OTA updates.
* You will now be able to get changelogs (via cmxlog.
The only real negative is that my builds tend to be more predictable because I'm building only a handful of devices instead of running a much larger build system like CM does. If a build is slow, don't worry it will come...
Click to expand...
Click to collapse
now as things settle down ... Christopher I am asking you this.. I was waiting from day one . Well more than 2 months passed. But i never asked u this. I will not say that u are free still. But Well Can u work in your free time on pure caf aosp ?? i don't have machine and knowldge to do that.. I would not have ever ask you brother if i have resources of doing that ...