Why wont my phone flash jelly bean anymore!!! - Samsung Epic 4G Touch

Can anyone tell me why my phone just quick letting me flash any and all jellybean roms. I posted about this before and no one seems to know. If anyone can help I would be most grateful. Thx ! Boot loop city with jb roms. Ics and gb work fine.

mr. ya-di-da said:
Can anyone tell me why my phone just quick letting me flash any and all jellybean roms. I posted about this before and no one seems to know. If anyone can help I would be most grateful. Thx ! Boot loop city with jb roms. Ics and gb work fine.
Click to expand...
Click to collapse
Have you tried an one click...using PC Odin...
Give everybody some more info..

I've tried every one click on my PC w Odin. Rooted, unrooted, full restore ect. Every jb rom flashes but stays in boot loop on the rom boot up screen.

mr. ya-di-da said:
I've tried every one click on my PC w Odin. Rooted, unrooted, full restore ect. Every jb rom flashes but stays in boot loop on the rom boot up screen.
Click to expand...
Click to collapse
You try the official release from sammobile.com
also..did up go into recovery and try to wipe cache and dalvik after the bootloop to see if that fixed it.
If none of the above has worked.. I would Odin back to the official firmware you're device came with... then try to Odin a JB one click or probably the official release. Sounds like maybe something is wonky with you're partition... I've never had this issue on my epic... but I did run into a similiar issue once with my gtab 10.1 and I had to wipe it and Odin the original firmware to fix it...
That being said... my tab never had an official JB release and so never needed a change in the partition...as we all run cm/aosp/aokp based roms. But that is how I managed to get it to flash roms again..
Let me know and good luck..

Also try pulling the battery ascends doing a factory reset during the bootloop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
Also try pulling the battery ascends doing a factory reset during the bootloop
Click to expand...
Click to collapse
Did this one awhile back and it didn't work.. I will try again when I get home from work just in case I brick I will have my PC to fix it.

Gil81 said:
You try the official release from sammobile.com
also..did up go into recovery and try to wipe cache and dalvik after the bootloop to see if that fixed it.
If none of the above has worked.. I would Odin back to the official firmware you're device came with... then try to Odin a JB one click or probably the official release. Sounds like maybe something is wonky with you're partition... I've never had this issue on my epic... but I did run into a similiar issue once with my gtab 10.1 and I had to wipe it and Odin the original firmware to fix it...
That being said... my tab never had an official JB release and so never needed a change in the partition...as we all run cm/aosp/aokp based roms. But that is how I managed to get it to flash roms again..
Let me know and good luck..
Click to expand...
Click to collapse
I will try this when I get home. Even the original VM software boot loops.

Any idea of why I get a failed status 7 when I try to flash the kitkat from ?

You need a Newer CWM version in order for it to flash, unfortunately you need to be on a 4.3.1 ROM like hood pope to have the latest recovery version.
Sent from my SPH-D710 using Tapatalk

mr. ya-di-da said:
Any idea of why I get a failed status 7 when I try to flash the kitkat from ?
Click to expand...
Click to collapse
You remember... in the other thread you started about kitkat..
Bilgerryan said it was an error something or other... probably from something missing, like a comma or period or whatever... believe him.
He is the Man... maybe a new update will fix the issue... if one does exist. I'm not sure, as I've yet to even look into the thread recently... but I will tomorrow afternoon and see if I can flash it.
If I can... well... we'll have to figure out the issue on you're end.
Edit... if gamepro is right... then that's a simple solution... I'll try tomorrow.

Can't I just flash the newer cwm

Gil81 said:
You remember... in the other thread you started about kitkat..
Bilgerryan said it was an error something or other... probably from something missing, like a comma or period or whatever... believe him.
He is the Man... maybe a new update will fix the issue... if one does exist. I'm not sure, as I've yet to even look into the thread recently... but I will tomorrow afternoon and see if I can flash it.
If I can... well... we'll have to figure out the issue on you're end.
Edit... if gamepro is right... then that's a simple solution... I'll try tomorrow.
Click to expand...
Click to collapse
New update of the rom was posted today. Still install aborted status 7

mr. ya-di-da said:
New update of the rom was posted today. Still install aborted status 7
Click to expand...
Click to collapse
Then I would say gamepro is correct... flash 4.3..then reboot recovery and do you're wipes and flash 4.4..
I'll try tomorrow... afternoon.
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
mr. ya-di-da said:
Can't I just flash the newer cwm
Click to expand...
Click to collapse
Is there a new cwm recovery over there.... I've been on tw based roms for so long... I haven't been watching. But I'll look.

My phone want flash jb roms gonna have to find a fix for that first..I thought maybe it would flash kitkat and not have to worry about jb.

OK so I flashed hood pope and of course it did nothing but boot loop like all jb roms do on my phone , so I used the new cwm that comes w hood pope and flashed kitkat. It flashed but boot loop city like all jb roms. Now I'm back on my ics cm9 the old man. Can't do anything until this issue gets fixed on my phone or get a new phone.

Have you tryed repartitioning the phone, may be that will work:what:
Sent from my SPH-D710 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=2345831

gamepro602 said:
Have you tryed repartitioning the phone, may be that will work:what:
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
No I have not because I don't know how to do that. I searched to find some instructions on how to and came up empty

Related

No recovery still can root,can falsh any rom,just use this.

download and unrar to anywhere,and then find runme flash exe,and then you can see an command window,just follow it,if any questions ask me.
This rom already rooted.this way can falsh rom without custom recovery,but the rom must be make by myself.so if someone tested this is ok ,and want a new rom,can ask me .for sure I tested was ok.http://dl.dbank.com/c0bbx2igyb this is not flash the radio ,so do not worry brick your phone ,this even saftety than flash ruu.
gq455402012 said:
download and unrar to anywhere,and then find runme flash exe,and then you can see an command window,just follow it,if any questions ask me.
This rom already rooted.this way can falsh rom without custom recovery,but the rom must be make by myself.so if someone tested this is ok ,and want a new rom,can ask me .for sure I tested was ok.
Click to expand...
Click to collapse
Can't find the download button -_-' Can you please make a screen shot of where the link is?
Second of all: no offence, but what rom is this? can you do this for the M1indh4xor rom? How can we trust this rom of yours?
samkuiper9 said:
Can't find the download button -_-' Can you please make a screen shot of where the link is?
Second of all: no offence, but what rom is this? can you do this for the M1indh4xor rom? How can we trust this rom of yours?
Click to expand...
Click to collapse
yes i can do it , if you can not trust me ,I can say nothing,this is 2.35rom,original rom,but rooted it.if any question I will reply tomorrow,today too late.
Hmmm ill let someone else try this and report back sounds interesting
samkuiper9 said:
Can't find the download button -_-' Can you please make a screen shot of where the link is?
Second of all: no offence, but what rom is this? can you do this for the M1indh4xor rom? How can we trust this rom of yours?
Click to expand...
Click to collapse
can you see the first word download?this is the link . the M1indh4xor rom?what is this?
gq455402012 said:
download and unrar to anywhere,and then find runme flash exe,and then you can see an command window,just follow it,if any questions ask me.
This rom already rooted.this way can falsh rom without custom recovery,but the rom must be make by myself.so if someone tested this is ok ,and want a new rom,can ask me .for sure I tested was ok.http://dl.dbank.com/c0bbx2igyb this is not flash the radio ,so do not worry brick your phone ,this even saftety than flash ruu.
Click to expand...
Click to collapse
Has anyone tried this yet?
gq455402012 said:
can you see the first word download?this is the link . the M1indh4xor rom?what is this?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1432259
I ment this ROM.
I flashed and was succesfull!
See: View attachment 1075495
Now i did factory reset, it rebooted, gave the HTC screen...
Currently looking @ a weird coulorfull screen which looks like a disco, and moves around really fast.. Hope this goes right x'D
.... I have got to the menu where i had to put in my simpassword. After input phone gave HTC screen. Got scarred like hell. But now i'm filling in the configurations.
---------- Post added at 01:02 AM ---------- Previous post was at 12:55 AM ----------
Works!
Flashed the ROM.
Android: 2.3.5
HTC Sense 2.1
Soft. nmb: 2.13.720.1
Looks like stock ROM, with Root just as explained. SuperSu installed. Rest is as STOCK.
Awesome! So this means i can flash Custom Roms!
Is it just replacing the BOOT.img + SYSTEM.img files from your download?
@samkuiper 9
have you managed to install Rom manager and flash a custom recovery yet on this rooted Rom your now using? also are you able to reboot into clockwork mod recovery? sorry for all the questions
aggazz said:
@samkuiper 9
have you managed to install Rom manager and flash a custom recovery yet on this rooted Rom your now using? also are you able to reboot into clockwork mod recovery? sorry for all the questions
Click to expand...
Click to collapse
Np, I can get into recovery now but it still does not work entirely. See picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Going to try and install Rom manager now aswell as flashing other recoverys.
ok mate thanks for the response, keep us updated on your progress with Rom manager and alternate recoveries, hopefully we can crack this soon and flash whatever roms we want!
aggazz said:
ok mate thanks for the response, keep us updated on your progress with Rom manager and alternate recoveries, hopefully we can crack this soon and flash whatever roms we want!
Click to expand...
Click to collapse
It seems to already have CWM 2.0.5.8 (thats what Rom manager says..)
Can't flash any recovery right now beceause adb keeps saying "conneting to device"....
I tried Alquez's PG76IMG unofficial cwm recovery 2.0.5.6 in root folder and open Hboot. This gave me invallid CID.
So can't help you right now. Rom manager works thats one thing.. x'D
Reboot into recovery gave me the same screen again.
Flashed recovery through Rom manager, it said succesfull. Than reboot into recovery -> after HTC screen -> blackscreen buttons lit up.... Same story all over again.
But the good news is you don't need recovery any more, because of this tool! so who cares? More important is can we flash are own roms by just replacing the files system.img and boot.img in the file he gave us?!?!
samkuiper9 said:
It seems to already have CWM 2.0.5.8 (thats what Rom manager says..)
Can't flash any recovery right now beceause adb keeps saying "conneting to device"....
I tried Alquez's PG76IMG unofficial cwm recovery 2.0.5.6 in root folder and open Hboot. This gave me invallid CID.
So can't help you right now. Rom manager works thats one thing.. x'D
Reboot into recovery gave me the same screen again.
Flashed recovery through Rom manager, it said succesfull. Than reboot into recovery -> after HTC screen -> blackscreen buttons lit up.... Same story all over again.
But the good news is you don't need recovery any more, because of this tool! so who cares? More important is can we flash are own roms by just replacing the files system.img and boot.img in the file he gave us?!?!
Click to expand...
Click to collapse
first congratulation for your phone ,you do not need have try others ,I tested ,did not work, you do not neeed custom recovery ,we just flash any rom.but the rom need make specially,you give me the rom,and I make it for you.
gq455402012 said:
first congratulation for your phone ,you do not need have try others ,I tested ,did not work, you do not neeed custom recovery ,we just use fastboot flash any rom.but the rom need make specially,you give me the rom,and I make it for you.
Click to expand...
Click to collapse
how about cm7 or cm9?
aggazz said:
ok mate thanks for the response, keep us updated on your progress with Rom manager and alternate recoveries, hopefully we can crack this soon and flash whatever roms we want!
Click to expand...
Click to collapse
Flashed this RZR Recovery Link
Same result, can't get into recovery. So this is a dead end.
I agree with aggazz can you please get cm7 in it? cm 7
Aggazz, did you get my PM?
samkuiper9 said:
Flashed this RZR Recovery Link
Same result, can't get into recovery. So this is a dead end.
I agree with aggazz can you please get cm7 in it? cm 7
Aggazz, did you get my PM?
Click to expand...
Click to collapse
yes,I make it for you ,please wait.
@samkuiper 9
I have just read it ill reply back later when I'm home
ok ,just now I tested was ok,this is CM7 ROM,enjoy it.http://dl.dbank.com/c007jd77wp
How to download?
This looks good, but that download page is impossible for me to use.
Asian characters in the captcha is NOT a good way to get western users!
Could someone please provide a mirror somewhere?

Face unlock doesn't work with any ICS custom rom.

Hey everyone. I have a small problem. I have tried countless of custom roms on my Xperia Play. However, none of them seem to let me use face unlock. I've made sure I'm using the recommended kernel and most up to date version of the rom. I have also used CWM to flash GApps-ICS and Gapps-ICE-facelock, but still I am met with "Face Unlock couldn't start".
At the moment, I am using the Ice Cream Pureness rom and the LuPuS-iCs-BeTa_v3 kernel (which is recommended for this rom)
I have searched the forums here, but found nothing that works. If anyone could please tell me what I'm doing wrong, I'd really appreciate it. Thanks
atm i use cyanogenmod 9 rc 2 with the cyanogemod 9 kernel, i can select the option too use face unlock although im not sure if it works (i don't have my phone with me right now) i will test it when i find my phone
Works just fine on GlazedICS for me.
i found it! my phone won't recognize my face but thats probably because the amount of dust infront of the frontfacing camera. it should work just fine on yours.
RamonVNL said:
i found it! my phone won't recognize my face but thats probably because the amount of dust infront of the frontfacing camera. it should work just fine on yours.
Click to expand...
Click to collapse
I'd like it to, but no matter what, it always brings up the error "Face Unlock couldn't start".
Jibby777 said:
I'd like it to, but no matter what, it always brings up the error "Face Unlock couldn't start".
Click to expand...
Click to collapse
Have you tried fixing permissions with cwm? It might be something as silly as that
agraceful said:
Have you tried fixing permissions with cwm? It might be something as silly as that
Click to expand...
Click to collapse
Just did that. Still faced with the error. Any other ideas?
Jibby777 said:
Just did that. Still faced with the error. Any other ideas?
Click to expand...
Click to collapse
You don't need to install the face unlock addon anymore, try downloading the latest ICS gapps and cm9 based rom.
Weird.. I've been on the same rom, still is actually n the only problem i've had is in-compatible games, messed up gamepad(needless to say), n portable wifi hotspot. Its still in ver.1. So prob/bugs are there. Mybe u could try the new lupus ics beta v4. See if that help.
Kindly Hit Thanks Button if i've help u in any way.
Nabeel_Nabs said:
You don't need to install the face unlock addon anymore, try downloading the latest ICS gapps and cm9 based rom.
Click to expand...
Click to collapse
I don't want to use CM9. I like Ice cream pureness because of its UI and performance. It states in the thread that face unlock should work, but for me it doesn't.
sdojoin said:
Weird.. I've been on the same rom, still is actually n the only problem i've had is in-compatible games, messed up gamepad(needless to say), n portable wifi hotspot. Its still in ver.1. So prob/bugs are there. Mybe u could try the new lupus ics beta v4. See if that help.
Kindly Hit Thanks Button if i've help u in any way.
Click to expand...
Click to collapse
Hey, thanks for the input. I have updated to LuPuS-iCs v4 BFS Version, but am still unfortunately getting the error. Do you think installing the CFS version would work? I really don't know the difference between them.
Also, is there anything like an error log for face unlock that I could post here?
Jibby777 said:
Hey, thanks for the input. I have updated to LuPuS-iCs v4 BFS Version, but am still unfortunately getting the error. Do you think installing the CFS version would work? I really don't know the difference between them.
Also, is there anything like an error log for face unlock that I could post here?
Click to expand...
Click to collapse
I'm using the cfs ver. Did u flash stock 62 f/w before flasing the rom?? I think if u follow the instruction the latter it should work just fine.
Kindly Hit Thanks Button if i've help u in any way.
sdojoin said:
I'm using the cfs ver. Did u flash stock 62 f/w before flasing the rom?? I think if u follow the instruction the latter it should work just fine.
Kindly Hit Thanks Button if i've help u in any way.
Click to expand...
Click to collapse
Sorry, I'm a bit of a noob with Andriod hacking. What is stock 62? I can't seem to find any mention of it in the install instructions. But in the meanwhile, I'll flash the cfs version to see if that works. Thanks
EDIT: It didn't
Jibby777 said:
Sorry, I'm a bit of a noob with Andriod hacking. What is stock 62? I can't seem to find any mention of it in the install instructions. But in the meanwhile, I'll flash the cfs version to see if that works. Thanks
EDIT: It didn't
Click to expand...
Click to collapse
Ok. 62 f/w is a stock firmware that end with 62 in the build number. U can find'em in the dev stickies section. And its a must use/requirment firmware for installing Ics. It got a lot of optimization on it. Yeah it dosen't say in the op. But if u run all the discussion in the thread n mybe u should, u'll find every1 is talking bout it there.
Kindly Hit Thanks Button if i've help u in any way.
sdojoin said:
Ok. 62 f/w is a stock firmware that end with 62 in the build number. U can find'em in the dev stickies section. And its a must use/requirment firmware for installing Ics. It got a lot of optimization on it. Yeah it dosen't say in the op. But if u run all the discussion in the thread n mybe u should, u'll find every1 is talking bout it there.
Kindly Hit Thanks Button if i've help u in any way.
Click to expand...
Click to collapse
Great, I'll try that and report back
Kindly Hit Thanks Button if i've help u in any way.
sdojoin said:
Kindly Hit Thanks Button if i've help u in any way.
Click to expand...
Click to collapse
Thanked! Sorry, I was too excited to go find the rom xD Also, just wondering if it's safe flashing the .ftf file over an ICS rom with an ICS kernel.
Jibby777 said:
Thanked! Sorry, I was too excited to go find the rom xD Also, just wondering if it's safe flashing the .ftf file over an ICS rom with an ICS kernel.
Click to expand...
Click to collapse
When u flash a full .ftf using flashtool everything will be wipe clean. It givs u the factory stock system looks etc. After booting to the stock f/w u can start flashing any rom u want. Mybe u should check a guide on how to flash stock f/w, coz its like "fallback" whenever u hit a wall n don't know what else to do.
Kindly Hit Thanks Button if i've help u in any way.
sdojoin said:
When u flash a full .ftf using flashtool everything will be wipe clean. It givs u the factory stock system looks etc. After booting to the stock f/w u can start flashing any rom u want. Mybe u should check a guide on how to flash stock f/w, coz its like "fallback" whenever u hit a wall n don't know what else to do.
Kindly Hit Thanks Button if i've help u in any way.
Click to expand...
Click to collapse
Great! Just in the process of doing that now. I'll report back when done
Jibby777 said:
Great! Just in the process of doing that now. I'll report back when done
Click to expand...
Click to collapse
Sigh, I give up. Even after flashing stock roms and installing ICS over them, it just still won't work. Face Unlock just isn't worth all of this. I thank you all for your help anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Could Not Flash To Page Plus Because Of Custom Rom?

I went to a local page plus dealer and after several tries trying to flash i was told i could flash my phone because of my memory was read only or something like that? Is this something dealing with the kernel? I'm on Aokp and i see the yellow triangle every time i boot up..
Your rom should only make it easier imo.. Id suggest flashing a stock rom for dial codes such as the mms fix and 4g mac address alterations, if you even need it!
Flash it back to stock using odin, go get it flashed, then root and rom.
Another suggestion is to learn the "flashing" process. Youd be surprised at what youll learn and it comes in handy!
As always read, read again, and re read everything you just read!
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
OmegaBlaze said:
I went to a local page plus dealer and after several tries trying to flash i was told i could flash my phone because of my memory was read only or something like that? Is this something dealing with the kernel? I'm on Aokp and i see the yellow triangle every time i boot up..
Click to expand...
Click to collapse
Thanks for the quick reply!!
Long story short, i just bought this phone 2 days ago and i'm trying to grasp everything.
I came from a droid x and it was much different. To go back to factory, all we had to do was SBF.
Are you familiar with what files i need to go back to stock?
Oh yeah, im currently on a nandroid backup that i made when i first rooted my phone. But i see that i'm on Agat's dirty kernel. Which kernel do i need to be back stock? EL26? FH13? etc
Maybe this would help as well:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Take a glance in the dev section it has everything youll need there. I suggest EL26 odin package. NO BRICK! id also read up on the post in this section describing "for the most part" the flashing process for boost. That will kinda give you a general overview of what your in for if you decide you wanna do it yourself. Btw odin isnt hard to figure out at all at all but like i said read the directions in the op carefully TWICE, THEN AGAIN AS A PRECAUTIONARY MEASURE AND READ IT AS YOUR DOING THE FLASH PROCESS.
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
---------- Post added at 02:30 AM ---------- Previous post was at 02:25 AM ----------
Yeah i learned to flash between boost and verizon/sprint and some tricks a few months ago but im no pro.. It honestly doesnt matter what your on or what your using.. Odin is pretty simple and you can use it on whatever rom. at least i have. But you take your own risks lol if you screw it up its not on me.
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
grizzfu said:
Take a glance in the dev section it has everything youll need there. I suggest EL26 odin package. NO BRICK! id also read up on the post in this section describing "for the most part" the flashing process for boost. That will kinda give you a general overview of what your in for if you decide you wanna do it yourself. Btw odin isnt hard to figure out at all at all but like i said read the directions in the op carefully TWICE, THEN AGAIN AS A PRECAUTIONARY MEASURE AND READ IT AS YOUR DOING THE FLASH PROCESS.
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
Click to expand...
Click to collapse
Do you have any links to help guide me?
http://forum.xda-developers.com/showthread.php?t=1416477
EL26 ^ ~ Odin factory\rooted restore. Root isnt going to do anything but help the guy or you.. Just sayin lol
Btw there are some assholes here and usually i would have told you to browse the threads and use the search feature but i find its alot easier when your new to have someone kinda spoon feed this stuff to you. However, if you ask me something thats in the op/tutorial, that tells me you didnt do the one thing i asked.. READ! LOL
Other than that i wont mind helping but others might not be so helpful with spoonfeeding so to speak. No offense intended.
And dont be afraid to hit the thanks button!
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
grizzfu said:
http://forum.xda-developers.com/showthread.php?t=1416477
EL26 ^ ~ Odin factory\rooted restore. Root isnt going to do anything but help the guy or you.. Just sayin lol
Btw there are some assholes here and usually i would have told you to browse the threads and use the search feature but i find its alot easier when your new to have someone kinda spoon feed this stuff to you. However, if you ask me something thats in the op/tutorial, that tells me you didnt do the one thing i asked.. READ! LOL
Other than that i wont mind helping but others might not be so helpful with spoonfeeding so to speak. No offense intended.
And dont be afraid to hit the thanks button!
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
Click to expand...
Click to collapse
Ahhh...I think i'm learning..So with my droid x, i used to use Rslite(Not sure if you're familiar with it) to go back to my stock ota rom.
I'm assuming Odin would be the same thing. It lets me go back to Ota updates whenever? Am i on the right track?
Yeap! I had an atrix but i prefer samsung. And your definately on the right track. Odin can be used to flash custom roms as well if there made for it.
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
So howd it go?
Sent from a Samsung Galaxy FAR FAR AWAY... From an iPhone5!
I can't find the Page Plus ROM for the Samsung Galaxy S II from Sprint. Where can I find the rom, can someone please help me.
Just flash it by yourself!
Force fed a failcake via Swype
Ok I would flash it myself but where can I find the ROM? I don't have the ROM.
There is no ROM. I use the same roms as anyone would use on sprint. You flash stuff to your nvram
Force fed a failcake via Swype
moparfreak426 said:
There is no ROM. I use the same roms as anyone would use on sprint. You flash stuff to your nvram
Force fed a failcake via Swype
Click to expand...
Click to collapse
Do you have any instructions? Please
11secEVO said:
Do you have any instructions? Please
Click to expand...
Click to collapse
Gtalk me @ [email protected]
Force fed a failcake via Swype
lol there is no pageplus rom for the e4gt.. this is a sprint phone.. just go in the dev section and look for one of sfhubs stock rooted one clicks.. u just put phone in download mode and run the one click from the computer.. as long as its a stock rom you should have less problems.. not sure how it works but aokp is an aosp build which wont work with dialer codes so qpst or other related apps wont work on aosp since you have tp change your phone to writeable using dialer codes to get to the options to change it.. at least thats how i think if it is anything like changing a prl...
edit: link to el29 one click: http://forum.xda-developers.com/showthread.php?t=1433101
Sent from my SPH-D710 using xda app-developers app
moparfreak426 said:
Gtalk me @ [email protected]
Force fed a failcake via Swype
Click to expand...
Click to collapse
I sent you a request.
---------- Post added at 12:43 PM ---------- Previous post was at 12:42 PM ----------
elliwigy said:
lol there is no pageplus rom for the e4gt.. this is a sprint phone.. just go in the dev section and look for one of sfhubs stock rooted one clicks.. u just put phone in download mode and run the one click from the computer.. as long as its a stock rom you should have less problems.. not sure how it works but aokp is an aosp build which wont work with dialer codes so qpst or other related apps wont work on aosp since you have tp change your phone to writeable using dialer codes to get to the options to change it.. at least thats how i think if it is anything like changing a prl...
edit: link to el29 one click: http://forum.xda-developers.com/showthread.php?t=1433101
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the response. I rooted the phone but I don't know what I need to do next.
Ok, I scripted your gtalk invite i'm not sure which one you are, I have too many
Force fed a failcake via Swype

[ROM][7/15] - AT&T Stock Rooted De-Odex "MF3" - Latest OTA! - No F/W Update Required!

[ROM][7/15] - AT&T Stock Rooted De-Odex "MF3" - Latest OTA! - No F/W Update Required!
This is the latest MF3 OTA From that was just pushed late last week.
You do not need to change any firmware partitions for this to work!
However you do have to be on the MDL Firmware!
This ROM is NOT loki'ed so you will need an auto Loki Recovery of will need to flash Loki-Doki Patch!
Features
Stock Rooted MF3 Update
De-Odexed
Zip aligned
busybox
init.d support
unsecured boot image (ADB as root)
KNOX Warning removed
Not Loki'ed
MD5: 2BC7C21439A941B802FC43A7070A3204
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download HERE!
MOD EDIT: Download link removed with OP's permission.
Please hit Thanks! My Last Stock Root had 400 Downloads and only 38 Thanks!
Its not hard to hit Thanks!
​
Sharing Policy
The spirit of Open Source is to share your knowledge and files with the rest of the world so they can improve on what you do when possible. This is also my philosophy and I would never compromise that!
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credits!
Do not use my work if you cannot give proper credits!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
However this does not include my CleanROM series of ROMS. Please do not use those without contacting me first!
This ROM is not a CleanROM. Its a stock rooted and all yours!
Hit Thanks!
Canadian users can flash the attached patch to use this ROM.
First! Thanks for your hard work.
Sent from my SAMSUNG-SGH-I337 using xda premium
mmanjj said:
First! Thanks for your hard work.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Your Welcome!
All of my thanks today might go to you...
Sent from my Xooma Xoom Xoom
surge27 said:
All of my thanks today might go to you...
Sent from my Xooma Xoom Xoom
Click to expand...
Click to collapse
Thanks for the Thanks :angel:
Great work once again. My wife refuses to go to custom ROMs and this week I quickly rooted her phone and froze updates so she wouldn't lose the ability to do so in the future. Only downside was not getting the latest update. Then here you are solving that issue for me. It's like you were in my head or something! :silly:
Newbie type question though - will data be effected by flashing this or can i just flash on top stock and retain all her data, apps, accounts and settings?
Thanks
This may be a stupid question, but If I run this to update from MDL will it wipe my apps and have to re-install them and will I loose my customizations to make google wallet and Hangouts video chat over the network work?
Well good morning to me.
Thank you Scott!!
worked great on stock rooted with TWRP, just had to remember to flash loki-doki
Wow, thanks, this should be good, I knew to wait until a professional got a hold of it: Thanks serious.
nice job scott!! :good: mind if is use this as a base ?
iB4STiD said:
nice job scott!! :good: mind if is use this as a base ?
Click to expand...
Click to collapse
Another Pro on the job, can't wait for your version either. Looking forward to it.
Early thanks to you also.
Now let me ask the stupid question, if I flash this, can we still have the ability to run custom roms after? meaning, we won't be locked into MF3 will we.
TheAxman said:
Another Pro on the job, can't wait for your version either. Looking forward to it.
Early thanks to you also.
Click to expand...
Click to collapse
thanks man!! .. all credit to scott!!. saved me from having to check sammobile 7 times a day for an odin leak
Quick question / curious observation -- on the screenshot, I noticed you have MF3 as the build version, but MDL as the modem still.
Did you revert back to MDL, or does this package not flash/include the MF3 modem?
hamzer11 said:
Great work once again. My wife refuses to go to custom ROMs and this week I quickly rooted her phone and froze updates so she wouldn't lose the ability to do so in the future. Only downside was not getting the latest update. Then here you are solving that issue for me. It's like you were in my head or something! :silly:
Newbie type question though - will data be effected by flashing this or can i just flash on top stock and retain all her data, apps, accounts and settings?
Thanks
Click to expand...
Click to collapse
It should be a solid inplace update going from stock to stock rooted.
truckmann said:
This may be a stupid question, but If I run this to update from MDL will it wipe my apps and have to re-install them and will I loose my customizations to make google wallet and Hangouts video chat over the network work?
Click to expand...
Click to collapse
You will loose those, yes.
Its a stock ROM.
calvin35 said:
Well good morning to me.
Thank you Scott!!
Click to expand...
Click to collapse
Good night to me!
morbidz said:
worked great on stock rooted with TWRP, just had to remember to flash loki-doki
Click to expand...
Click to collapse
Yep, should work on any recovery. I left Loki out of it because of the variations of people and configurations that will flash this.
TheAxman said:
Wow, thanks, this should be good, I knew to wait until a professional got a hold of it: Thanks serious.
Click to expand...
Click to collapse
Word!
I actually had this done the about an hour after the OTA was out...
Long story short... I had a bad binary updater file that caused me to pull my already thin hair out. Then another guy, jetlitheone, gave me a really simple idea... Try another updater binary... and... BOOM!
SO credits to jetlitheone for making me not go insane on this build.
Funny thing... No ****... It was the same binary I used on every version of the S4 ROMS I have made before this one... I dont get it... But its now in the past, lol :silly:
iB4STiD said:
nice job scott!! :good: mind if is use this as a base ?
Click to expand...
Click to collapse
Anyone can use this ROM for any thing they want. Please refer to post #2. Whenever I post a stock rooted ROM its for EVERYONE to make there own or make a public ROM out of.
All yours man...
But credit for the base should be given of course!
TheAxman said:
Now let me ask the stupid question, if I flash this, can we still have the ability to run custom roms after? meaning, we won't be locked into MF3 will we.
Click to expand...
Click to collapse
No, this is JUST the ROM, no firmware, no radios, etc.
You can flash this on the MDL firmware just like any other ROM and swap back to any other ROM.
BUt this thing, cleaned up, is HELLA SMOOTH!
Even stock rooted untweaked is smooth! I was impressed! I was about to chuck the S4 after using my HTC One... BUt now I will keep both
pinoymutt said:
Quick question / curious observation -- on the screenshot, I noticed you have MF3 as the build version, but MDL as the modem still.
Did you revert back to MDL, or does this package not flash/include the MF3 modem?
Click to expand...
Click to collapse
See above, just the ROM. You do your own modem.
Do not flash any of the SBL's are in another post. They are simply not needed for this ROM. I made it work with the old firmware... Which is the most safe route to go!!!
You can however flash the MF3 radio! Heard it runs good on this base according to a couple guys in my CleanROM thread.
Awesoem work partner!... yourrrrr goooooodddd
scrosler said:
No, this is JUST the ROM, no firmware, no radios, etc.
You can flash this on the MDL firmware just like any other ROM and swap back to any other ROM.
BUt this thing, cleaned up, is HELLA SMOOTH!
Even stock rooted untweaked is smooth! I was impressed! I was about to chuck the S4 after using my HTC One... BUt now I will keep both
Click to expand...
Click to collapse
Yeah everyone you can find the radios/modem quite easy, if you guys cannot I can link a flashable zip once I find it
thanks for the credit, luckily I was up never sleep
edit: ran out of thanks ! :|
Difference between this and Cleanrom 1.5?
hi scott!
just wondering what is the difference between this ROM and CleanRom 1.5?
is this one just complete Stock ATT? ( NON-CleanRom Modified?)
thanks!

GPS problems 4.4.4

I've been using c-rom for a while. I wanted to upgrade when some kernels started dropping after 9-10-14, but it seems like every ROM I try, I can not get my gps to lock. No matter what. I tried upgrading my modem to nd8 but that hasn't helped either.
I'm at a loss now. Any tips or anyone else experiencing this?
Sent from the MotorCity
Thanks for the help lol
Only ROM that works with gps locking for me is dirty unicorns 7.8. I'm on nd8 modem also.
Sent from the MotorCity
ksmullins88 said:
Thanks for the help lol
Only ROM that works with gps locking for me is dirty unicorns 7.8. I'm on nd8 modem also.
Sent from the MotorCity
Click to expand...
Click to collapse
I'm having the same problem. I'm on MK3 and it has been a hit or miss with getting GPS to lock. I can get Slim rom and Octo to lock but it looks as if anything that is based off cyanogenmod kernel does not work. I was wondering if it's related to MK3, Or I needed to update my bootloader, Odin the new stock rom with Knox or something. I've tried updating PRL and profile, tightened all the screws but to no avail. Its Driving me nuts.
Never had this problem, but i do remember reading from someone that they fixed their issue by turning off location services under google settings?
You may also want to check under app manager, and uninstall any updates to maps?
Sent from my SPH-L710, using Tapatalk 2 Cyan. ND8. Rooted and rom'd with WICKED-X (HELLS YA!)
Hey @ksmullins88, have you updated your bootloader or just the modem?
I'm in the same boat. GPS works for me on 4.4.2 Touchwiz but when I tried out a CM-11 based 4.4.4 ROM, I can get search results and stuff like that but I can't drive with it at all.
Pariah24 said:
I'm in the same boat. GPS works for me on 4.4.2 Touchwiz but when I tried out a CM-11 based 4.4.4 ROM, I can get search results and stuff like that but I can't drive with it at all.
Click to expand...
Click to collapse
You can try this, but you'll have to flash back to Touchwiz to do it.
Calibrating Compass
1) Go to the test menu page by dialing* # 0 * #
2) Press Sensors (Never press Sleepmode!)
3) At the bottom of the page is compass and the number must be 3. That means you have calibrated the compass by 3 axis....
4) If you have number 0,1 or 2 just move your phone in the air until you get 3...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROM: WICKED X
Pariah24 said:
I'm in the same boat. GPS works for me on 4.4.2 Touchwiz but when I tried out a CM-11 based 4.4.4 ROM, I can get search results and stuff like that but I can't drive with it at all.
Click to expand...
Click to collapse
I was having the same issue in SPIRIT AOSP ROM but did the following and my GPS is now fixed.
Did what Bilgeryan said in another thread (see quote below) then Downloaded app called GPS STATUS and did COMPASS calibration (under the wrench ) and Calibrated pitch and roll. :
bilgerryan said:
You can try this, but you'll have to flash back to Touchwiz to do it.
Calibrating Compass
1) Go to the test menu page by dialing* # 0 * #
2) Press Sensors (Never press Sleepmode!)
3) At the bottom of the page is compass and the number must be 3. That means you have calibrated the compass by 3 axis....
4) If you have number 0,1 or 2 just move your phone in the air until you get 3...
Click to expand...
Click to collapse
I also had this problem on a slightly older version of Carbon, but the latest 10/20 Carbon nightly had working GPS for me. (Carbon is largely based off of CM)
Cmicasa the Great XvX said:
I was having the same issue in SPIRIT AOSP ROM but did the following and my GPS is now fixed.
Did what Bilgeryan said in another thread (see quote below) then Downloaded app called GPS STATUS and did COMPASS calibration (under the wrench ) and Calibrated pitch and roll. :
Click to expand...
Click to collapse
Thanks, I just tried this and it didn't work for me. It works on the Touchwiz Rom, but not on AOSP.
ms372591 said:
Thanks, I just tried this and it didn't work for me. It works on the Touchwiz Rom, but not on AOSP.
Click to expand...
Click to collapse
That and signal problems are widely known issues on AOSP ROMs that aren't for AOSP devices. AOSP's RIL stack just can't hold a signal as well as the software that was made for the device.
My ROM: WICKED X
bilgerryan said:
That and signal problems are widely known issues on AOSP ROMs that aren't for AOSP devices. AOSP's RIL stack just can't hold a signal as well as the software that was made for the device.
My ROM: WICKED X
Click to expand...
Click to collapse
Thanks Bilgerryan, I guess I'm heading back to Touchwiz.
ms372591 said:
Thanks Bilgerryan, I guess I'm heading back to Touchwiz.
Click to expand...
Click to collapse
Yeah I try going back every now and again, but I usually get 1x signal and no GPS with AOSP so I think I've officially given up on this device. Kudos to those that don't have problems, wish I could say the same but it's Touchwiz only for me until I get a new device.
My ROM: WICKED X
cmdmoto said:
Hey @ksmullins88, have you updated your bootloader or just the modem?
Click to expand...
Click to collapse
How do you update bootloader with Knox?
Sent from my CarbonROM 4.4.4 SPH-L710
metalhead131 said:
How do you update bootloader with Knox?
Sent from my CarbonROM 4.4.4 SPH-L710
Click to expand...
Click to collapse
Download the latest stock .tar file and use Odin. It will update your bootloader and modem. FYI.... I did this a couple weeks ago and it didn't work with any CM bases ROMS. GPS not working is a know problem with AOSP on the S3.
cmdmoto said:
Download the latest stock .tar file and use Odin.
Click to expand...
Click to collapse
Sorry about noob questions but doesn't Knox block flashing or updating of the bootloader?
---------- Post added at 10:09 PM ---------- Previous post was at 10:05 PM ----------
bilgerryan said:
AOSP's RIL stack just can't hold a signal as well as the software that was made for the device.[/URL]
Click to expand...
Click to collapse
Why can't you take the RIL from Touchwiz and put it into an AOSP ROM? I can't be the first to think of this.
Put simply, it doesn't work that way.
My ROM: WICKED X
bilgerryan said:
Put simply, it doesn't work that way.
My ROM: WICKED X
Click to expand...
Click to collapse
Ok. Thanks. So as of late, the only way to get GPS working is by going back to stock?
Just another reason to get a nexus...
metalhead131 said:
Sorry about noob questions but doesn't Knox block flashing or updating of the bootloader?
ODIN
http://forum.xda-developers.com/showthread.php?t=2755793
KNOX is extra security for your device and is not needed to run your ROM. Many TW ROMS have removed it. Its also used for warranty purposes.
Click to expand...
Click to collapse
cmdmoto said:
metalhead131 said:
Sorry about noob questions but doesn't Knox block flashing or updating of the bootloader?
ODIN
http://forum.xda-developers.com/showthread.php?t=2755793
KNOX is extra security for your device and is not needed to run your ROM. Many TW ROMS have removed it. Its also used for warranty purposes.
Click to expand...
Click to collapse
It also prevents downgrading firmware, resulting in a brick.[emoji6]
Click to expand...
Click to collapse

Categories

Resources