Hello guys! I wanted to ask a question about my ace ii. I installed rox's cm11(build with audio not fixed) and used it for a day or two. Then i go into cwm to install cm 10.2 and it says that it failed to install the zip and also a status 7 error.
Also my recovery is permanent cwm with me doing nothing. When i reboot to recovery it goes to cwm 6.0.4.5 automatically..official recovery has disappeared. I tried to delete "assert starting line" and then i get Status 6 error. Then i try to flash cm11 again which i did successfully last time and status 7 error pops up again. I can't flash anything .(can flash cwm 6.0.2.8 but still same error.)
What can i do here guys?
Go to download mode and flash stock jb via odin
Shadowcareful said:
Go to download mode and flash stock jb via odin
Click to expand...
Click to collapse
Alrighty will flash again russian mg2.
About the errors did i corrupt anything in some way?
Just did it and it works until i flash cm 10.2(26 nov version) which makes it go in a bootloop(?) (cyanogenmod icon flashes)
EDIT: Goes into cwm 6.0.4.5 again..stock recovery is gone and menu flashes. I think imma stay with stock 4.1.2 until i get to know what it is. Anyone got a clue?
After flashing back to stock did you root ,wipe data, cache and dalvik before install ? I'm thinking you didn't root it
Sent from my GT-I8160 using XDA Premium 4 mobile app
I rooted it..so yeah I tried it again and now it worked..
Related
I downloaded the .zip file for the upgrade from alpha3 to alpha4 off CM's website, put it on my SDCARD, booted into recovery - looks like stock recovery, (following the steps on CM website) then applied the zip -> it looks like its doing something for about 20 seconds then the little android guy dies and has a red triangle with an exclamation point coming out his stomach. What am I doing wrong?
baseband version: FE10
Kernel Version: 3.0.15-SPH-D710.FD10-CL377892
You need to be using a clockwork mod recovery to flash, stock recovery will not work.
First make sure you are rooted.
Next use either Odin 1.85 or Mobile Odin to flash the EL26 kernel.
Upon reboot, go into recovery mode using volume up+power. If you miss your chance to do so, just pull the battery and try to get into recovery again.
Using CWM, flash per the install instructions.
so do i just odin the kernel back to el26 w/ CWM? the reason i dont want to do a clean install is because i wodnt want to wipe my data. If i odin to EL26 w/ CWM do i need to go back to gingerbread?? Or is there a way i can sat on ICS and upgrade?
what if i used this kernel? [NEW][KERNEL] FE16 Repack with ACS recovery
mazostyle said:
so do i just odin the kernel back to el26 w/ CWM? the reason i dont want to do a clean install is because i wodnt want to wipe my data. If i odin to EL26 w/ CWM do i need to go back to gingerbread?? Or is there a way i can sat on ICS and upgrade?
what if i used this kernel? [NEW][KERNEL] FE16 Repack with ACS recovery
Click to expand...
Click to collapse
If someone tells you how to do it safely, and you choose to do it your way done come crying when you brick, because it still says don't use recovery with ics kernels...
Sent from my Sprint Galaxy Nexus CDMA using Tapatalk 2
dante32278 said:
You need to be using a clockwork mod recovery to flash, stock recovery will not work.
First make sure you are rooted.
Next use either Odin 1.85 or Mobile Odin to flash the EL26 kernel.
Upon reboot, go into recovery mode using volume up+power. If you miss your chance to do so, just pull the battery and try to get into recovery again.
Using CWM, flash per the install instructions.
Click to expand...
Click to collapse
Do exactly what he said here... You're not going back to GB or wiping data. You're just re-flashing a CWM recovery. When you originally installed CM9 alpha 3, you used a CWM recovery. But the CM9 ROM re-flashes a stock recovery (which you can not use to upgrade from alpha3 to alpha4).
So all you do is Odin the EL26 kernel/CWM recovery image (phone in Download mode), and then you reboot and hold vol+ and power to get the phone into the CWM Recovery Mode. From there, you just install the CM9 alpha4, you don't wipe data or lose anything.
thanks man, it worked.
I am new to the forums and didn't want to make a new thread. I am having issues with the GPS (Maps App.) The app loads up i enter the destination i want to go to but it wont find my location where i am at. It just keeps searching for my location...
So i went ahead and downloaded another GPS app ( tele nav.) same issue. I was wondering is there a way to fix GPS issues on this rom? I would like to fix that issue..
anyone have a solution to fixing the GPS issue on this rom???
Hey guys,
So I just rooted my rogers galaxy s3 and I'm trying to install CWM recovery. My phone isnt on the ROM manager list so I tried flashing it through odin. I've tried about 7 times each with different versions of cwm recovery and odin keeps saying it was a success but whenever I try to go into recovery mode I just go to android system recovery and not CWM recovery. I have no clue why this is happening.
Any ideas?
Thanks,
Zach
Zach23 said:
Hey guys,
So I just rooted my rogers galaxy s3 and I'm trying to install CWM recovery. My phone isnt on the ROM manager list so I tried flashing it through odin. I've tried about 7 times each with different versions of cwm recovery and odin keeps saying it was a success but whenever I try to go into recovery mode I just go to android system recovery and not CWM recovery. I have no clue why this is happening.
Any ideas?
Thanks,
Zach
Click to expand...
Click to collapse
Btw i dunno why its not working it worked for me.. but i switched cuz CWM SUCKS get twrp bruh its touch and everything and it tells you how much battery you have while flashing...
Download goomanager off playstore... download some random rom (you dont need to flash the rom its only so it gives u the link to the open recovery) you will be asked if you have a recovery installed say no install open recovery they install TWRP on your phone done.. happy flashing
Zach23 said:
Hey guys,
So I just rooted my rogers galaxy s3 and I'm trying to install CWM recovery. My phone isnt on the ROM manager list so I tried flashing it through odin. I've tried about 7 times each with different versions of cwm recovery and odin keeps saying it was a success but whenever I try to go into recovery mode I just go to android system recovery and not CWM recovery. I have no clue why this is happening.
Any ideas?
Thanks,
Zach
Click to expand...
Click to collapse
Had the same problems, follow this guide use the latest versions of everything (Odin, etc.). The key is the pulling of the battery after flashing and before you boot. Once I did that I got into CWM no problem.
amzi said:
Btw i dunno why its not working it worked for me.. but i switched cuz CWM SUCKS get twrp bruh its touch and everything and it tells you how much battery you have while flashing...
Download goomanager off playstore... download some random rom (you dont need to flash the rom its only so it gives u the link to the open recovery) you will be asked if you have a recovery installed say no install open recovery they install TWRP on your phone done.. happy flashing
Click to expand...
Click to collapse
Yeah I ended up installing TWRP, and I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=1766684&highlight=gapps
Good so far!
This is probably the same issue i was having where the stock recovery kept coming back. You will need to rename or delete these two files.
/system/recovery-from-boot.p
/system/etc/install-recovery.sh
Zach23 said:
Yeah I ended up installing TWRP, and I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=1766684&highlight=gapps
Good so far!
Click to expand...
Click to collapse
xD the thanks button is there for a reason
Hi
i figured out how to update my original firmware of 4.1.1 on my Note 2 N7105 LTE to 4.1.2 by downloading this tar.md5 (N7105XXDLL4_N7105TMHDLK8_TMH) through Odin
and it seemed to work because in "about device" it says im running 4.1.2 and it also seems to be a REALLY annoying European T-Mobile version because of the short and LOUD t-mobile video every single time i open and close my phone.
I also installed CWM-based Recovery v6.0.1.5-jb which works perfectly (thank god)
now when i tried to boot the deodexed rom for N7105XXDLL4 through recovery via sd card. everything seems fine i can choose all the options in sequence and when i get to the end it tries to install (percentage bar) but stops very quickly and reboots me to recovery mode...the first time i did that it forced me to restore from backup (because it wouldnt boot at all) and the second time i did it it made me reboot and the samsung logo appeared followed by "android is upgrading 0 to 162" I WAS SUPPPPER HAPPPPY!! but i was crossing my fingers...low and behold the phone did boot but all the fonts and everything else were EXTREMELY tiny and a message kept popping up saying SystemSU has closed or something..
I obviously restored back to t-mobile 4.1.2 (hungarian)
Is there something wrong im doing during the installation? should i try and upload it through odin or something instead of through my sd card??and how do you do that?? i mean it cant be the wrong deodexed because i chose the first one for xxdll4 and it the installation does boot on my phone..
i mean everything looks great except for the fact that it stops at the beginning of installation and reboots me to recovery prematurely....
ANY HELP???!!!! THANKS!!!
Proced a factoty reset, erase format all except SD Csrd in CWM optiond.
Install TWRP via CWM
Install update uding TWRP
pirata****zu said:
Proced a factoty reset, erase format all except SD Csrd in CWM optiond.
Install TWRP via CWM
Install update uding TWRP
Click to expand...
Click to collapse
id be more than HAPPY to thank you!! trust me!! :good:
considering im a tad of a noob..
can you refer to a link or a bit more details on how to proceed with all this??
and also what will this all do for me??
in the end i want 4.1.2 and a custom rom to replace the 4.1.2 tmobile that i already have. and obviously keep some sorth recovery (i already have cwm) other than android recovery 3e.
when i boot recovery mode when i go to wipe data/factory reset
i dont have an option to erase all except sd card...
how do i install twrp?? where is it? and what is it??
install what update using TWRP?? the custom rom?? or another 4.1.2 update??
sorry im trying to understand all this....
TWRP is other kind of recovery. Try a fredh install using it.
http://forum.xda-developers.com/showthread.php?t=1956939
But, before, wipe/factory reset using CWM
Install TWRP (.zip file) using CWM
Reboot recovery
Install new tom using TWRP
pirata****zu said:
TWRP is other kind of recovery. Try a fredh install using it.
http://forum.xda-developers.com/showthread.php?t=1956939
But, before, wipe/factory reset using CWM
Install TWRP (.zip file) using CWM
Reboot recovery
Install new tom using TWRP
Click to expand...
Click to collapse
i just installed openrecovery-twrp-2.4.0.0alpha-t0lte.img.tar using ODIN
without doing any factory reset or anything through CWM and it worked...is that bad? im going to try and load rom now....
ari770 said:
i just installed openrecovery-twrp-2.4.0.0alpha-t0lte.img.tar using ODIN
without doing any factory reset or anything through CWM and it worked...is that bad? im going to try and load rom now....
Click to expand...
Click to collapse
now im stuck what are the steps to install deodexed rom in TWRP?? or any rom for that matter....
if i go and press install and select rom file and swipe to comfirm flash,it stops and says "failed" in red
E:/unable to open zip file etc etc
ari770 said:
now im stuck what are the steps to install deodexed rom in TWRP?? or any rom for that matter....
if i go and press install and select rom file and swipe to comfirm flash,it stops and says "failed" in red
E:/unable to open zip file etc etc
Click to expand...
Click to collapse
So i finally got it to run deodexed installation on TWRP..i have no idea how lol...i wiped cache and delvik cache and it ran and installed and rebooted
the only issue is that i dont see any difference at all...except for the fact that there is no tmobile video when i restarted my phone...
how do i know if deodexed is installed??? i dont even have phone record..and it gave me the option to install it and its not there...hmmmm
im so lost....
btw how to i get to customize this new rom??
thanks
please :laugh:
I believe flashing back the stock rom via Odin will also flash back stock recovery
Whosat said:
I believe flashing back the stock rom via Odin will also flash back stock recovery
Click to expand...
Click to collapse
Yes thats correct! Flashing back restores your recovery in most cases, BUT not always. Little chance cwm is still there and you'll get prompted with a notification that ''stock recovery will be present at next reboot'' when you leave clockworkmod with either yes or no.
Sent from my GT-I9195 using xda premium
Thank you very much. :laugh::laugh::laugh::laugh::laugh:
no commands and error during wipe cache
no commands and error during wipe cache...anybody can solve my problems???
my s4 gt-i9190 is showing no command in recovery mode...i have tried to flash it using odin but the problem still continues. how can i solve it?
Hey guys,
I had a rooted Galaxy Wonder with a custom Rom (TouchWiz, forgot which version). I had CWM 5 and wanted to Install CWM 6 so I can be able to get the Kitkat 4.4 Rom, but unfortunately I soft bricked it. I flashed a custom Rom using Odin 4.43 Multi Downloader and it successfully passed, but with a problem, it doesn't get to the Homescreen and it keeps of rebooting itself all over again. I can get to download mode and to stock recovery. So I thought I could maybe root it again and install CWM 6 to flash the rom.
Now the problem is that when I use the stock recovery (by Holding Vol Up+Home+Power) I don't get to install the root update.zip because it reboots itself after I press the menu button (it writes something about updating then reboots).
What can I do? Is there anyway to Root the device via Odin and install CWM 6 so I can flash a custom rom?
Help!
Thanks in advance!
AytchG said:
Hey guys,
I had a rooted Galaxy Wonder with a custom Rom (TouchWiz, forgot which version). I had CWM 5 and wanted to Install CWM 6 so I can be able to get the Kitkat 4.4 Rom, but unfortunately I soft bricked it. I flashed a custom Rom using Odin 4.43 Multi Downloader and it successfully passed, but with a problem, it doesn't get to the Homescreen and it keeps of rebooting itself all over again. I can get to download mode and to stock recovery. So I thought I could maybe root it again and install CWM 6 to flash the rom.
Now the problem is that when I use the stock recovery (by Holding Vol Up+Home+Power) I don't get to install the root update.zip because it reboots itself after I press the menu button (it writes something about updating then reboots).
What can I do? Is there anyway to Root the device via Odin and install CWM 6 so I can flash a custom rom?
Help!
Thanks in advance!
Click to expand...
Click to collapse
I flashed a custom Rom using Odin 4.43 Multi Downloader and it successfully passed, but with a problem, it doesn't get to the Homescreen and it keeps of rebooting itself all over again.
Click to expand...
Click to collapse
Did you do a full wife before you install a new custom ROM? I guess not.
So I thought I could maybe root it again and install CWM 6 to flash the rom.
Click to expand...
Click to collapse
You don't need to root it again since it's already rooted (when you first installed TouchWiz) and it's not the cause i think.
Now the problem is that when I use the stock recovery (by Holding Vol Up+Home+Power) I don't get to install the root update.zip because it reboots itself after I press the menu button (it writes something about updating then reboots).
Click to expand...
Click to collapse
I think your phone is still rooted that's why your having that problem.
So, your problem is that, you believed your phone is not rooted anymore?
dec0der said:
Did you do a full wife before you install a new custom ROM? I guess not.
You don't need to root it again since it's already rooted (when you first installed TouchWiz) and it's not the cause i think.
I think your phone is still rooted that's why your having that problem.
So, your problem is that, you believed your phone is not rooted anymore?
Click to expand...
Click to collapse
Well, I didn't know if it is rooted or not and I don't know how to flash Cwm 6 and I can't use the phone normally since it is not able to turn on to the Homescreen.
Don't mind the older custom Rom, it was flashed successfully and I used it for more than 3 months.
AytchG said:
Well, I didn't know if it is rooted or not and I don't know how to flash Cwm 6 and I can't use the phone normally since it is not able to turn on to the Homescreen.
Don't mind the older custom Rom, it was flashed successfully and I used it for more than 3 months.
Click to expand...
Click to collapse
Which recovery can you enter now? cwm or stock recovery?
dec0der said:
Which recovery can you enter now? cwm or stock recovery?
Click to expand...
Click to collapse
Stock, but can't do anything in it. I get the White box icon with the yellow arrow and android and press the menu button but then it says updating Application then some things that I can't read because the go quickly and something about can't access (some directory in system) and Update successful and rebooting.
It keeps doing that.
AytchG said:
Stock, but can't do anything in it. I get the White box icon with the yellow arrow and android and press the menu button but then it says updating Application then some things that I can't read because the go quickly and something about can't access (some directory in system) and Update successful and rebooting.
It keeps doing that.
Click to expand...
Click to collapse
Okay, lets try this one first. Install CWM recovery 6.x
Download the following files (make sure its not corrupted files)
Odin Multi Downloader v4.44 HERE
ClockworkMod v6.0.4.5 HERE MD5 Sum: 144ce4ffcf9f577e7e12562f3c5579d3 (extract after download)
Ancora.ops HERE MD5 Sum: 65831d136621d6d550d2a11a2e8111f3 (extract after download)
And follow this flashing guide.
guide 1 and guide 2
Note: On the guide 1, do step 2-6 only. step 6 that says
6.Click on the One Package-Button and select the downloaded MD5-file.
Click to expand...
Click to collapse
, your MD5 file will be recovery-clockwork-6.0.4.5-ancora.tar.md5
If it was successful, try to enter CWM recovery then.
dec0der said:
Okay, lets try this one first. Install CWM recovery 6.x
Download the following files (make sure its not corrupted files)
Odin Multi Downloader v4.44 HERE
ClockworkMod v6.0.4.5 HERE MD5 Sum: 144ce4ffcf9f577e7e12562f3c5579d3 (extract after download)
Ancora.ops HERE MD5 Sum: 65831d136621d6d550d2a11a2e8111f3 (extract after download)
And follow this flashing guide.
guide 1 and guide 2
Note: On the guide 1, do step 2-6 only. step 6 that says , your MD5 file will be recovery-clockwork-6.0.4.5-ancora.tar.md5
If it was successful, try to enter CWM recovery then.
Click to expand...
Click to collapse
Now when I enter the recovery mode I get a black blank screen.
AytchG said:
Now when I enter the recovery mode I get a black blank screen.
Click to expand...
Click to collapse
cwm recovery 6.x or still stock? we need either one them to work.
dec0der said:
cwm recovery 6.x or still stock? we need either both to work.
Click to expand...
Click to collapse
None. Just a black screen
Edit: I tried flashing now cwm 5 instead of 6 and it worked. I can boot to cwm 5 recovery. But still is there anyway to flash cwm 6?
AytchG said:
None. Just a black screen
Edit: I tried flashing now cwm 5 instead of 6 and it worked. I can boot to cwm 5 recovery. But still is there anyway to flash cwm 6?
Click to expand...
Click to collapse
Just download Phil's Advanced CWM recovery, and flash it (CWM recovery 6.0.4.5) Flash the recovery like any else recovery you flashed.
Download the .op and the cwm recovery (Flashable via odin multi downloader ) Here
And make sure you are running Windows 7, and not Windows 8, I have experienced problems flashing recovery on Windows 8 64bit
AytchG said:
None. Just a black screen
Edit: I tried flashing now cwm 5 instead of 6 and it worked. I can boot to cwm 5 recovery. But still is there anyway to flash cwm 6?
Click to expand...
Click to collapse
I flashed a custom Rom using Odin 4.43 Multi Downloader
Click to expand...
Click to collapse
this might be the cause, so we need do clean wipe of all the data/ files in your internal storage. We need to make it boot first since it's not just a recovery problem but ROM.
Do you still have the touchwiz rom in your external sd-card? If it's still there, do this steps in cmw:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
install touchwiz
reboot
dec0der said:
install touchwiz (and gapps if you have)
reboot
Click to expand...
Click to collapse
If its touchwi5, you dont have to install gapps, they are already in there
MayB4ck said:
If its touchwi5, you dont have to install gapps, they are already in there
Click to expand...
Click to collapse
Corrected. Never knew gapps was already integrated w/ that ROM, never tried it
MayB4ck said:
Just download Phil's Advanced CWM recovery, and flash it (CWM recovery 6.0.4.5) Flash the recovery like any else recovery you flashed.
Download the .op and the cwm recovery (Flashable via odin multi downloader ) Here
And make sure you are running Windows 7, and not Windows 8, I have experienced problems flashing recovery on Windows 8 64bit
Click to expand...
Click to collapse
Thanks! I flashed this Phil's Cwm and then flashed the cm 11 Kitkat 4.4 and gapps and it is working!! Thank you!
dec0der said:
this might be the cause, so we need do clean wipe of all the data/ files in your internal storage. We need to make it boot first since it's not just a recovery problem but ROM.
Do you still have the touchwiz rom in your external sd-card? If it's still there, do this steps in cmw:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
install touchwiz
reboot
Click to expand...
Click to collapse
I tried MayB4ck's idea and it worked! Thanks for your help!!! I really appreciate it!
Solved
AytchG said:
I tried MayB4ck's idea and it worked! Thanks for your help!!! I really appreciate it!
Click to expand...
Click to collapse
I am very happy to solve your problem sir Have a nice day