I downloaded the .zip file for the upgrade from alpha3 to alpha4 off CM's website, put it on my SDCARD, booted into recovery - looks like stock recovery, (following the steps on CM website) then applied the zip -> it looks like its doing something for about 20 seconds then the little android guy dies and has a red triangle with an exclamation point coming out his stomach. What am I doing wrong?
baseband version: FE10
Kernel Version: 3.0.15-SPH-D710.FD10-CL377892
You need to be using a clockwork mod recovery to flash, stock recovery will not work.
First make sure you are rooted.
Next use either Odin 1.85 or Mobile Odin to flash the EL26 kernel.
Upon reboot, go into recovery mode using volume up+power. If you miss your chance to do so, just pull the battery and try to get into recovery again.
Using CWM, flash per the install instructions.
so do i just odin the kernel back to el26 w/ CWM? the reason i dont want to do a clean install is because i wodnt want to wipe my data. If i odin to EL26 w/ CWM do i need to go back to gingerbread?? Or is there a way i can sat on ICS and upgrade?
what if i used this kernel? [NEW][KERNEL] FE16 Repack with ACS recovery
mazostyle said:
so do i just odin the kernel back to el26 w/ CWM? the reason i dont want to do a clean install is because i wodnt want to wipe my data. If i odin to EL26 w/ CWM do i need to go back to gingerbread?? Or is there a way i can sat on ICS and upgrade?
what if i used this kernel? [NEW][KERNEL] FE16 Repack with ACS recovery
Click to expand...
Click to collapse
If someone tells you how to do it safely, and you choose to do it your way done come crying when you brick, because it still says don't use recovery with ics kernels...
Sent from my Sprint Galaxy Nexus CDMA using Tapatalk 2
dante32278 said:
You need to be using a clockwork mod recovery to flash, stock recovery will not work.
First make sure you are rooted.
Next use either Odin 1.85 or Mobile Odin to flash the EL26 kernel.
Upon reboot, go into recovery mode using volume up+power. If you miss your chance to do so, just pull the battery and try to get into recovery again.
Using CWM, flash per the install instructions.
Click to expand...
Click to collapse
Do exactly what he said here... You're not going back to GB or wiping data. You're just re-flashing a CWM recovery. When you originally installed CM9 alpha 3, you used a CWM recovery. But the CM9 ROM re-flashes a stock recovery (which you can not use to upgrade from alpha3 to alpha4).
So all you do is Odin the EL26 kernel/CWM recovery image (phone in Download mode), and then you reboot and hold vol+ and power to get the phone into the CWM Recovery Mode. From there, you just install the CM9 alpha4, you don't wipe data or lose anything.
thanks man, it worked.
I am new to the forums and didn't want to make a new thread. I am having issues with the GPS (Maps App.) The app loads up i enter the destination i want to go to but it wont find my location where i am at. It just keeps searching for my location...
So i went ahead and downloaded another GPS app ( tele nav.) same issue. I was wondering is there a way to fix GPS issues on this rom? I would like to fix that issue..
anyone have a solution to fixing the GPS issue on this rom???
Related
I am trying to successfully flash a kernel through mobile Odin ....to be exact its the EL26 cwm that is recommended to use to flash new roms but every time i flash it through mobile Odin i get a black screen and nothing happens after the flash?
I've tried pulling the battery and even powering off the phone and back on again but still gets stuck on the black screen........ the file i use is the one on this site that has a .md5 at the end of it can someone tell me what im doing wrong?(gentle please im a noob at this)
Also the CWMR does flash i hold down the up+power button and im get into CWM but i have to restore my nandroid backup i made to turn the phone back on.....
Icebluemale30 said:
I am trying to successfully flash a kernel through mobile Odin ....to be exact its the EL26 cwm that is recommended to use to flash new roms but every time i flash it through mobile Odin i get a black screen and nothing happens after the flash?
I've tried pulling the battery and even powering off the phone and back on again but still gets stuck on the black screen........ the file i use is the one on this site that has a .md5 at the end of it can someone tell me what im doing wrong?(gentle please im a noob at this)
Also the CWMR does flash i hold down the up+power button and im get into CWM but i have to restore my nandroid backup i made to turn the phone back on.....
Click to expand...
Click to collapse
If you're flashing the StockEL26CWM tar and are on ICS, it will go to the black screen because that kernel isn't compatible with ICS.
You'll need to hold VolUp and Power until it reboots into recovery. Don't let go of either button until you're in recovery.
nivron said:
If you're flashing the StockEL26CWM tar and are on ICS, it will go to the black screen because that kernel isn't compatible with ICS.
You'll need to hold VolUp and Power until it reboots into recovery. Don't let go of either button until you're in recovery.
Click to expand...
Click to collapse
so i cant have the stock CWM recovery on any ICS build rom ?
Icebluemale30 said:
so i cant have the stock CWM recovery on any ICS build rom ?
Click to expand...
Click to collapse
You don't want to use ANY recovery on ICS. It has high risks of bricking your device.
Flashing the EL26 (which is a GB recovery) is what you'd want to do if you are upgrading your ICS or restoring a nandroid of a GB ROM. But the ICS ROM won't boot with the stock EL26 kernel because it is a GB kernel.
I am using AOKP build 28 (newest i have to flash) on my epic 4g touch. when i try to flash a new recovery it goes back to stock with only 4 options. when i try to use odin i soft brick it. i can get back to my aokp but i cannot the gapps to install... i also tried the cm9 rom/kernel and i am still not getting anywhere... anyone got any ideas besides going only stock?
Just to clarify, what are you trying to flash by ODIN? And are you using Mobile ODIN or ODIN OC? (One-Click)
If you haven't already you may want to try the EL26 or EL29 stock + rooted. I believe SFHub also has a ODIN TAR with CWM repack available but will trigger the triangle. (May not be an issue for you, but just to make aware.)
Please bring me back. I installed CM9 pre5 but forgot to update kernel to get CMW with 3 fingers and now I installed battery mod beta4 and phone justs loops.
I made a backup when I updated before installing battery mod but I don't know how to get phone back into clockwork mod since i didn't install kernel for it after CM9 update.
I need instructions to get phone back up please save me.
Thanks for your fast input...
The Cm9 update includes the kernel. Just three finger boot into recovery.
Sent from my SPH-D700 CM9 ANDROID 4.0.4
Great but what if?
wow that was fast and accurate, many Thank You Zeinzu. I did not know it had CWM on CM9 thinking you had to flash kernels like nyan 5 or shadow cm9 6.3.3 to get it to work.
If by any chance that 3 finger didn't work I would need to use odin to:
via ODIN
1.To begin, download the CWM 5.0.2.7 tar file from the link above.
2.Run ODIN and make sure Re-Partition is unchecked.
3.Click PDA and choose the recovery you downloaded.
4.Boot your phone into Download Mode. (Power it off and holding down the 1 key on the keyboard, press the Power button.)
5.Connect the device to your PC and once you see it connected in ODIN, hit the Start button to begin the flashing process.
6.Once the recovery is flashed, the phone will reboot
does F.Reset Time checkboxes need to be selected?
or
odin back to OFFICIAL SPH-D700-FC09-8Gb-REL.tar then I need to root it again? lost here never had to go back so just wanted to know from the Pro's...
Thanks m8 =)
lanboy said:
wow that was fast and accurate, many Thank You Zeinzu. I did not know it had CWM on CM9 thinking you had to flash kernels like nyan 5 or shadow cm9 6.3.3 to get it to work.
If by any chance that 3 finger didn't work I would need to use odin to:
via ODIN
1.To begin, download the CWM 5.0.2.7 tar file from the link above.
2.Run ODIN and make sure Re-Partition is unchecked.
3.Click PDA and choose the recovery you downloaded.
4.Boot your phone into Download Mode. (Power it off and holding down the 1 key on the keyboard, press the Power button.)
5.Connect the device to your PC and once you see it connected in ODIN, hit the Start button to begin the flashing process.
6.Once the recovery is flashed, the phone will reboot
does F.Reset Time checkboxes need to be selected?
or
odin back to OFFICIAL SPH-D700-FC09-8Gb-REL.tar then I need to root it again? lost here never had to go back so just wanted to know from the Pro's...
Thanks m8 =)
Click to expand...
Click to collapse
Nooooo!!! Once on mtd (cm9 is mtd) do not flash another recovery.... there Is no flashable or .tar for cwm for mtd roms.. cm9 installed the recovery you should stick with (there is a touch recovery, but its buggy imo)
If you cantget to the recovery you will need the fc09 with victory.pit wth repartition an auto reboot checked...
Cool
flastnoles11 said:
Nooooo!!! Once on mtd (cm9 is mtd) do not flash another recovery.... there Is no flashable or .tar for cwm for mtd roms.. cm9 installed the recovery you should stick with (there is a touch recovery, but its buggy imo)
If you cantget to the recovery you will need the fc09 with victory.pit wth repartition an auto reboot checked...
Click to expand...
Click to collapse
Thank You Flashnoles you also saved me from bricking my phone.
I got confused into thinking I needed to install extra kernals on CM9 to get CMW but I followed Zeinzu advice and was saved. I was just about to odin a CMW.tar when I had my doubts and decided to ask the kind m8's of XDA.
Does CM9 stock kernal have the 3 Button Reboot or you only get that with Nyan Colonel v5 or ShadowKernel CM9 v0.6.3.3 because I try to do a fast reboot but keep getting volume going up or down?
I noticed when I installed the Nyan Colonel v5 it installed TeamWin Recovery Project (twrp) instead of CMW but I reverted back using restore-cwm.zip. Is this the "touch recovery" you were reffering to because I also found it buggy and was not confident using it for Recovery and tools?
So If a new CMW version pops up the only way to get it is to odin back to stock BML to install it then use Restore in CMW to get back to your saved Rom?
Could I use epic4g-fc09-sdcard-utility-v3.tar to temp bypass MTD and install CMW updates?
Thank You again both for your advice and great responses...
Lanboy
=)
lanboy said:
Thank You Flashnoles you also saved me from bricking my phone.
I got confused into thinking I needed to install extra kernals on CM9 to get CMW but I followed Zeinzu advice and was saved. I was just about to odin a CMW.tar when I had my doubts and decided to ask the kind m8's of XDA.
Does CM9 stock kernal have the 3 Button Reboot or you only get that with Nyan Colonel v5 or ShadowKernel CM9 v0.6.3.3 because I try to do a fast reboot but keep getting volume going up or down?
I noticed when I installed the Nyan Colonel v5 it installed TeamWin Recovery Project (twrp) instead of CMW but I reverted back using restore-cwm.zip. Is this the "touch recovery" you were reffering to because I also found it buggy and was not confident using it for Recovery and tools?
So If a new CMW version pops up the only way to get it is to odin back to stock BML to install it then use Restore in CMW to get back to your saved Rom?
Could I use epic4g-fc09-sdcard-utility-v3.tar to temp bypass MTD and install CMW updates?
Thank You again both for your advice and great responses...
Lanboy
=)
Click to expand...
Click to collapse
MTD uses a completely different recovery. The recovery is overwritten whenever you flash a rom or kernel. When thee is a new recovery, you will automatically get it when you update cm9.
Sent from my SPH-D700 using Tapatalk 2
Has anyone else had this problem with the screen freezing? It seems like manufacturing defect, but I'm not certain.
https://www.youtube.com/watch?v=mBC89c_NfPo
Looks like warranty claim
If u still got it
You have to hold them and not just tap them. Hold vol. down and power until you come into the download mode, or, vol. up and power until you get to the odin screen and reflash the rom you were using/wanting to use. I thought mine locked up. But, holding it seemed to fix the problem.
i have exactly the same problem,flash Stock ICS via odin with oneclick, the problem was fixed with that, but, there will be another problem, you cant root, if you flash a CWM the problem will be back when you enter in CWM. maybe a ICS rom rooted via odin can be the better solution but still i dont see any Rooted ICS via odin.
PD: I see that the problem is more common in rogers version
http://forum.xda-developers.com/showthread.php?t=1831561 that was the rom that i use. i hope someone can help with that freeze problem, because works perfect under ICS (one week and no problem) so i dont think that the problem is hardware
lorddavid said:
i have exactly the same problem,flash Stock ICS via odin with oneclick, the problem was fixed with that, but, there will be another problem, you cant root, if you flash a CWM the problem will be back when you enter in CWM. maybe a ICS rom rooted via odin can be the better solution but still i dont see any Rooted ICS via odin.
PD: I see that the problem is more common in rogers version
http://forum.xda-developers.com/showthread.php?t=1831561 that was the rom that i use. i hope someone can help with that freeze problem, because works perfect under ICS (one week and no problem) so i dont think that the problem is hardware
Click to expand...
Click to collapse
I installed the ICS Oneclick.exe
I started with GB.
Order installed:
i927R-boot-ardatdat-AA.img.tar -odin
i927_factoryfs_rooted.img.tar -odin
recovery.tar.md5 -odin
I927UCLG9_OneClick.exe -odin launched
Superuser-3.2-RC3-arm-signed.zip - CWM recovery mode flashed (vol. down + power hold until CWM recovery screen shows)
Rawr0w0 said:
I installed the ICS Oneclick.exe
I started with GB.
Order installed:
i927R-boot-ardatdat-AA.img.tar -odin
i927_factoryfs_rooted.img.tar -odin
recovery.tar.md5 -odin
I927UCLG9_OneClick.exe -odin launched
Superuser-3.2-RC3-arm-signed.zip - CWM recovery mode flashed (vol. down + power hold until CWM recovery screen shows)
Click to expand...
Click to collapse
But, your phone has that problem (the screen freeze like the video)?, the only thing that i dont flashed of what you did was i927R-boot-ardatdat-AA.img.tar -odin (i dont know what is that) but, OneClick replace everything, so, if you installed the recovery before oneclick, then the recovery become the stock one.
lorddavid said:
But, your phone has that problem (the screen freeze like the video)?, the only thing that i dont flashed of what you did was i927R-boot-ardatdat-AA.img.tar -odin (i dont know what is that) but, OneClick replace everything, so, if you installed the recovery before oneclick, then the recovery become the stock one.
Click to expand...
Click to collapse
the recovery is clockwork recovery
I had the bootload screen issue when i didn't flash in the right order.
the boot-ardatdat is rooted rom of stock GB
Rawr0w0 said:
the recovery is clockwork recovery
I had the bootload screen issue when i didn't flash in the right order.
the boot-ardatdat is rooted rom of stock GB
Click to expand...
Click to collapse
so,you has the same problem then, you start with stock GB right?, i will try that order this weekend that i have time, you install CWM afterSuperOneClick right? or you flash the superuser with the stock one? every thime that a i flash Clock work recovery mod its freeze in the recovery (i exactly try Clockwork Mod Touch Recovery 6.0.0.1)
I will try it, i hope that fix the problem,if not, do you know where to get ICS stock recovey? if CWM fails, i want flash only the recovery stock
lorddavid said:
so,you has the same problem then, you start with stock GB right?, i will try that order this weekend that i have time, you install CWM afterSuperOneClick right? or you flash the superuser with the stock one? every thime that a i flash Clock work recovery mod its freeze in the recovery (i exactly try Clockwork Mod Touch Recovery 6.0.0.1)
I will try it, i hope that fix the problem,if not, do you know where to get ICS stock recovey? if CWM fails, i want flash only the recovery stock
Click to expand...
Click to collapse
https://docs.google.com/open?id=0B2SSgcHNUl-nQXpaWmF0d05fMVE < CWM (given to me by Viktor0610 here in xda forums)
order of installing
Start with GB**
follow these instructions *I used the overclocked version*
http://forum.xda-developers.com/showthread.php?t=1378082
after doing this
install from one-click.exe for ICS 4.0.4 stock
then install CWM from the link above
SuperSu -better than Superuser
and
then boot into recovery mode (vol down + power)
http://forum.xda-developers.com/showthread.php?t=1848433
-you only need the CWM one (backlight fix)
and
http://forum.xda-developers.com/showthread.php?t=1849329
USB Tethering fix -again..only the CWM one
Then, let your phone boot up, and it should be working!
I know mine did **doing all this as a noob (all over again when I did my Glide *used to have Huwaei Ascend) took me 5 1/2 hours hahaha))
Rawr0w0 said:
https://docs.google.com/open?id=0B2SSgcHNUl-nQXpaWmF0d05fMVE < CWM (given to me by Viktor0610 here in xda forums)
order of installing
Start with GB**
follow these instructions *I used the overclocked version*
http://forum.xda-developers.com/showthread.php?t=1378082
after doing this
install from one-click.exe for ICS 4.0.4 stock
then install CWM from the link above
SuperSu -better than Superuser
and
then boot into recovery mode (vol down + power)
http://forum.xda-developers.com/showthread.php?t=1848433
-you only need the CWM one (backlight fix)
and
http://forum.xda-developers.com/showthread.php?t=1849329
USB Tethering fix -again..only the CWM one
Then, let your phone boot up, and it should be working!
I know mine did **doing all this as a noob (all over again when I did my Glide *used to have Huwaei Ascend) took me 5 1/2 hours hahaha))
Click to expand...
Click to collapse
i will try right now,one question, can you give me the link for supersu? i only have Superuser-3.2-RC3-x86-signed
Another question, Oneclick also format the external SD?
lorddavid said:
i will try right now,one question, can you give me the link for supersu? i only have Superuser-3.2-RC3-x86-signed
Click to expand...
Click to collapse
SuperSu is the app from the play store that gives your phone user access after it's been rooted using the attachment
I attached it to this message for the superuser you have to flash through CWM
Rawr0w0 said:
SuperSu is the app from the play store that gives your phone user access after it's been rooted using the attachment
I attached it to this message for the superuser you have to flash through CWM
Click to expand...
Click to collapse
FINALLYYYYYYYYYYYYYY IS ROOTEEEDDD THANKK YOUU really thank you,you save me
One last question, i can install custom rom now right?
All works perfect (GB roms or custom roms freeze when i connect usb, but i will use ICS )
lorddavid said:
FINALLYYYYYYYYYYYYYY IS ROOTEEEDDD THANKK YOUU really thank you,you save me
One last question, i can install custom rom now right?
All works perfect (GB roms or custom roms freeze when i connect usb, but i will use ICS )
Click to expand...
Click to collapse
Now that you have CWM, you can flash any rom. download the rom to your external_sd folder and you can go into CWM recovery mode and flash any .zip rom from GB -> ICS -> JB as long as it's CWM flash-able. I'm currently running stock waiting on the CM10 JB in the Dev forms to get fixed with the physical keyboard. I was thinking of using Inception, but didn't want to downgrade after it took me so long to get ICS working.
I'm glad I could help you out *first person I ever helped *
Rawr0w0 said:
Now that you have CWM, you can flash any rom. download the rom to your external_sd folder and you can go into CWM recovery mode and flash any .zip rom from GB -> ICS -> JB as long as it's CWM flash-able. I'm currently running stock waiting on the CM10 JB in the Dev forms to get fixed with the physical keyboard. I was thinking of using Inception, but didn't want to downgrade after it took me so long to get ICS working.
I'm glad I could help you out *first person I ever helped *
Click to expand...
Click to collapse
i am using now lite rom 0.6 GB still give me problem, but ICS works great, i almost sell my phone because i wasnt able to root.now, i am gonna use it a lot
Thanks again
I have a similar problem. But as similar as these problems are they all have their own amounts of salt and pepper..
So as for the ROMs I can flash it seems that I can't flash any except for ones that are of the latest baseband (UCLJ3) or later..
The GB that came with it never worked..
And CWMR doesn't work for me. So I have to use Team Win. But the problem with TWR is that it won't flash certain things. Like the tethering fix and Navigation Bar mod. So I'm kinda stuck here..
From the TWRP 2.4 page for I927 (http://forum.xda-developers.com/showthread.php?t=2093431)
Current Issues:
USB to PC mount not working :/
Device assert issue - some packages wont install
Click to expand...
Click to collapse
Anyone got any ideas? I'm sort of desperate for CWMR to work, as well as GB
Trying to update my old E4GT to KitKat (CM11) for use as an MP3 player. I believe it was on OI23 before. I tried EL26 CWM, Agat, and finally attempted installing Philz Touch before it gave up this screen. Kies cannot connect to it, even after making sure proper drivers are installed and doing the connection troubleshooter.
Am I screwed? Did I encounter the infamous "superbrick"?
Sunsparc said:
Trying to update my old E4GT to KitKat (CM11) for use as an MP3 player. I believe it was on OI23 before. I tried EL26 CWM, Agat, and finally attempted installing Philz Touch before it gave up this screen. Kies cannot connect to it, even after making sure proper drivers are installed and doing the connection troubleshooter.
Am I screwed? Did I encounter the infamous "superbrick"?
Click to expand...
Click to collapse
You should still be able to flash stock firmware via Odin in that state. Connect it and flash, provided that the battery is charged.
Droidriven said:
You should still be able to flash stock firmware via Odin in that state. Connect it and flash, provided that the battery us charged.
Click to expand...
Click to collapse
Ok I've gotten ODIN to recognize it again. Now how can I get to CM11? My biggest problem is finding a recovery that will work to flash it.
Here is a stock rooted ROM for d710 with CWM included in it, flash it via Odin and you'll be restored, rooted and have CWM.
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung%20Galaxy%20S2%20%28Sprint%29%20%28SPH-D710%29/Stock%20ROMs/GB/EL29/No%20Data%20Restore/Rooted
Then you'll need to flash an ICS modem or you won't be able to use Kit Kat custom ROMS(CM11), it is a .zip to be flashed in recovery the way a ROM is. Scroll to the bottom of the list and grab the last one. Flash it in recovery.
http://www.rwilco12.com/downloads.p... Galaxy S2 (Sprint) (SPH-D710)/Modems/ICS/ZIP
Then you'll need to find a 4.3 custom ROM to flash to update the devices partition structure before flashing a 4.4+(CM11) ROM. The trick is going to be finding 4.3 and 4.4 ROMs, they are old ROMs and may not be available for download anymore. I'm trying to get the CWM that I used uploaded so you can use it, it flashed all of my 4.4 - 4.4.4 ROMs. I flashed everything with it. It's CWM 5.0.2.7 for sph-d710.
Droidriven said:
Here is a stock rooted ROM for d710 with CWM included in it, flash it via Odin and you'll be restored, rooted and have CWM.
[URL="[/URL]
Then you'll need to flash an ICS modem or you won't be able to use Kit Kat custom ROMS(CM11), it is a .zip to be flashed in recovery the way a ROM is. Scroll to the bottom of the list and grab the last one. Flash it in recovery.
Then you'll need to find a 4.3 custom ROM to flash to update the devices partition structure before flashing a 4.4+(CM11) ROM. The trick is going to be finding 4.3 and 4.4 ROMs, they are old ROMs and may not be available for download anymore. I'm trying to get the CWM that I used uploaded so you can use it, it flashed all of my 4.4 - 4.4.4 ROMs. I flashed everything with it. It's CWM 5.0.2.7 for sph-d710.
Click to expand...
Click to collapse
I'm back up and running with it. It's rooted but I don't have CWM, it's still the stock Android System Recovery so I can't flash anything.
Sunsparc said:
I'm back up and running with it. It's rooted but I don't have CWM, it's still the stock Android System Recovery so I can't flash anything.
Click to expand...
Click to collapse
You flashed the file I linked? It is supposed to have CWM packaged with it. Go to rwilco12's android repository, at the top of the page you'll see a downloads tab. Click it then select the options on that menu until you get to Galaxy S2>Sprint SPH-D710>kernels and you'll find the Odin flashable recoveries for E4GT.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
You flashed the file I linked? It is supposed to have CWM packaged with it. Go to rwilco12's android repository, at the top of the page you'll see a downloads tab. Click it then select the options on that menu until you get to Galaxy S2>Sprint SPH-D710>kernels and you'll find the Odin flashable recoveries for E4GT.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I had an AGAT GB27 v1.3 from rwilco that I flashed to get a custom recovery, just flashed the FL24 modem with it. So I have EL29 software with FL24 modem. Ready to flash something newer now.
EDIT: And now it doesn't boot.
Sunsparc said:
I had an AGAT GB27 v1.3 from rwilco that I flashed to get a custom recovery, just flashed the FL24 modem with it. So I have EL29 software with FL24 modem. Ready to flash something newer now.
EDIT: And now it doesn't boot.
Click to expand...
Click to collapse
To get to Kit Kat, you've got to flash a 4.3 ROM then flash a 4.4 ROM. I'm not sure where you'll find one or if their are any available anymore.
There is CWM 5 or CWM 6 at rwilcos repository, its probably better than Agats
Sent from my SCH-I535 using Tapatalk
Droidriven said:
To get to Kit Kat, you've got to flash a 4.3 ROM then flash a 4.4 ROM. I'm not sure where you'll find one or if their are any available anymore.
There is CWM 5 or CWM 6 at rwilcos repository, its probably better than Agats
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
The CWM from rwilco is giving me a binary hash error in ODIN.
Sunsparc said:
The CWM from rwilco is giving me a binary hash error in ODIN.
Click to expand...
Click to collapse
I have a CWM 5.0.2.7 in zip that I'm trying to upload to my Android File Host for you but its giving me issues uploading. I'll find a place to put it so you can get it, then flash it in Agat recovery.
Flash Agat recovery again, then flash the CWM I give you in Agat, then go back to main menu and find the "reboot recovery" option somewhere, I can't remember where its at in Agat, reboot recovery will boot you into the new recovery, do not boot to system then boot to recovery, it will revert to Agat and you'll have to flash CWM again and boot to it correctly to keep it.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
I have a CWM 5.0.2.7 in zip that I'm trying to upload to my Android File Host for you but its giving me issues uploading. I'll find a place to put it so you can get it, then flash it in Agat recovery.
Flash Agat recovery again, then flash the CWM I give you in Agat, then go back to main menu and find the "reboot recovery" option somewhere, I can't remember where its at in Agat, reboot recovery will boot you into the new recovery, do not boot to system then boot to recovery, it will revert to Agat and you'll have to flash CWM again and boot to it correctly to keep it.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Awesome, I'll be waiting.
Sunsparc said:
Awesome, I'll be waiting.
Click to expand...
Click to collapse
Try this
https://www.androidfilehost.com/?fid=24545070682210688