I tried to flash omnirom today, and it gave an error that my phone isn't t0ltetmo, and is instead t03g. what's the deal? how do I fix this? thanks.
theoilman said:
I tried to flash omnirom today, and it gave an error that my phone isn't t0ltetmo, and is instead t03g. what's the deal? how do I fix this? thanks.
Click to expand...
Click to collapse
I have the SGH-T889, not the N7100, so I'm guessing this is because of an old ROM I flashed? I just flashed the phone back to stock with the latest stock image but it still registers as t03g, so there has to be something else I have to do.
If you get this error in recovery, it'd be because of a failed check in the OmniROM's install script.
I'll assume you've flashed a N7100 recovery instead of an N7105 one? That's certainly the first thing I'd check.
Good luck,
Darkshado
Darkshado said:
If you get this error in recovery, it'd be because of a failed check in the OmniROM's install script.
I'll assume you've flashed a N7100 recovery instead of an N7105 one? That's certainly the first thing I'd check.
Good luck,
Darkshado
Click to expand...
Click to collapse
I flashed T889UVBMD1 from teshxx's post in development (http://forum.xda-developers.com/showthread.php?t=2102380). is this the correct recovery? should I try a different recovery instead?
That'd be the stock recovery, which will do you little good when it comes to installing custom ROMs. Just get the latest t0lte or t0ltetmo TWRP or Clockworkmod Recovery.
Darkshado said:
That'd be the stock recovery, which will do you little good when it comes to installing custom ROMs. Just get the latest t0lte or t0ltetmo TWRP or Clockworkmod Recovery.
Click to expand...
Click to collapse
I'll try flashing a new recovery, thanks for the info!
Related
hello all,
I'm having trouble understanding something with my SIII. I have a Canadian Rogers SIII currently running DJJOHNNYBLAZE's rom.
great rom, no problems at all!
But when I try to, I haven't been able to install any CM, AOKP or AOSP rom on my phone through TWRP or CWM recovery... only the stock based roms work when I install them..
is there something I'm missing? or doing rom? I'm quite familiar with the flashing process, I've done it a million times on my SIII and my previous Sony Xperia..
Any help, tips or direction to an answer is much appreciated
RoshanDoon said:
But when I try to, I haven't been able to install any CM, AOKP or AOSP rom on my phone through TWRP or CWM recovery... only the stock based roms work when I install them..
Click to expand...
Click to collapse
First question: what fails about the install process?
Second question: how did you install the recovery images?
Most of the time when I hear something like this on a Canadian S3, it's because of the different device code (d2can vs. d2att) of the Canadian model; the images you get through goomanager or ROM Manager or similar will see that you're trying to install a d2att ROM on a device it sees as a d2can, fails to get that the two are software-compatible, and aborts with a "status 7" error.
If that's the case, you can manually flash, say, the d2att TWRP image (look here for the image and instructions), which will happily flash d2att ROMs onto your device.
smelenchuk said:
First question: what fails about the install process?
Second question: how did you install the recovery images?
Most of the time when I hear something like this on a Canadian S3, it's because of the different device code (d2can vs. d2att) of the Canadian model; the images you get through goomanager or ROM Manager or similar will see that you're trying to install a d2att ROM on a device it sees as a d2can, fails to get that the two are software-compatible, and aborts with a "status 7" error.
If that's the case, you can manually flash, say, the d2att TWRP image (look here for the image and instructions), which will happily flash d2att ROMs onto your device.
Click to expand...
Click to collapse
thanks for the quick reply
to answer your first question: when i flash any of them, in recovery it just says "Failed" in red letters.. the funny part is I've installed a couple open source roms before and they worked (ie Liquid, Ktoonez AOKP rom), now i can't :S the ones i flashed were d2att, possibly my problem now, however, why did they work before?
to answer the second: i do a factory reset, wipe cache, flash rom, install gapps, wipe dalvik (as stated in most forums)
also, i've installed TWRP by installing GooManager on my phone and installing it from there, is that wrong? is it different than manually doing it with the command?
thanks again
RoshanDoon said:
i've installed TWRP by installing GooManager on my phone and installing it from there, is that wrong? is it different than manually doing it with the command?
Click to expand...
Click to collapse
Yes - that means you have the d2can TWRP image and not the d2att recovery image, which causes the problem I described. You will probably want to manually install the d2att image in its place.
smelenchuk said:
Yes - that means you have the d2can TWRP image and not the d2att recovery image, which causes the problem I described. You will probably want to manually install the d2att image in its place.
Click to expand...
Click to collapse
ahhhh... gracias!
will do that now then, thanks
I'm having a similar problem.
I've rooted my s3 i747m (virgin), and I have backed up using TWRP.
Attempting to install Cyanogen mod from a .zip on internal sdcard. In recovery mode I've gone in and tried to install from the zip, but I'm getting status 7. Any ideas?
ultrashaun said:
I've rooted my s3 i747m (virgin), and I have backed up using TWRP.
Attempting to install Cyanogen mod from a .zip on internal sdcard. In recovery mode I've gone in and tried to install from the zip, but I'm getting status 7. Any ideas?
Click to expand...
Click to collapse
Exactly the same problem, exactly the same cause; read the earlier posts in this thread for an idea of what to do.
smelenchuk said:
Exactly the same problem, exactly the same cause; read the earlier posts in this thread for an idea of what to do.
Click to expand...
Click to collapse
Again! You've done it sir. This worked exactly right. Thank you so much.
Hi, so I'm trying to make this quick so that i can install CM10 tonight...
so I rooted my phone tonight, did everything right and stuff, but I went to go download the CM10 nightly build for my phone which is the Rogers (Canadian version). So I download the d2att version, did a backup, wiped everything and I tried installing it using CWM-Based recovery v5.5.0.4. But when I tried install it gave me status 7 aborted. I installed cwm using odin3 v1.85, what am I doing wrong, am I trying to install the wrong version? Sorry if this is a noob question but I'm new to this stuff :/
thanks for any help
Can anyone explain to me how I can update CWM? I downloaded the latest img from their website, but idk how to install it...I'm really confused...and I really need help :crying:
Go look at QBKing77 videos on YouTube or QBKing77.com he has the best videos in my opinion and installing CM10 and CWM. I am on CM10.1 without any problems.
hmm, did you use the v5 recovery? Did it work, because the version i had was cwm 5.5 and I couldn't update because of system 7 error, which is because the CWM version was too old.
If possible, could you link me the one you used?
Ok..so now I installed TWRP and I tried flashing CM10 it still didnt work and gave me status 7 error and it says:
assert failed: getpro ("ro.product.device")
E: Error in /sdcard/cm- 10.....d2att.zip
Is this because with goomanager i installed it for the d2can version and now I can't install the d2att even though thats the only version i can use? goomanager only lets me get d2can...and when I try to install the never cwm recover img using android terminal it keeps giving me No such file or directory.
Can anybody help me with this...
PhoenixBlitz said:
Ok..so now I installed TWRP and I tried flashing CM10 it still didnt work and gave me status 7 error and it says:
assert failed: getpro ("ro.product.device")
E: Error in /sdcard/cm- 10.....d2att.zip
Is this because with goomanager i installed it for the d2can version and now I can't install the d2att even though thats the only version i can use? goomanager only lets me get d2can...and when I try to install the never cwm recover img using android terminal it keeps giving me No such file or directory.
Can anybody help me with this...
Click to expand...
Click to collapse
have you tried flashing another ROM, like an-aosp or aokp-based one? If you followed their instructions, it may help you determine whether it was a bad download or something s more specific to your device. just throwing this one out there....
captican said:
have you tried flashing another ROM, like an-aosp or aokp-based one? If you followed their instructions, it may help you determine whether it was a bad download or something s more specific to your device. just throwing this one out there....
Click to expand...
Click to collapse
oh...hahaha
I just flashed AOKP and everything worked great! Thanks for that little suggestion! Custom ROMs are now my favorite!
PhoenixBlitz said:
oh...hahaha
I just flashed AOKP and everything worked great! Thanks for that little suggestion! Custom ROMs are now my favorite!
Click to expand...
Click to collapse
If you want to flash a CM ROM you will need to be on the most current d2att recovery for either CWR or TWRP. If you were getting a status 7 error, I'm going to assume that you have a d2can phone.. make sure you have a d2att recovery and you'll be able to flash anything. ROM Manager will let you install CWR or Goo Manager will let you install TWRP (which is what I use).
BAM1789 said:
If you want to flash a CM ROM you will need to be on the most current d2att recovery for either CWR or TWRP. If you were getting a status 7 error, I'm going to assume that you have a d2can phone.. make sure you have a d2att recovery and you'll be able to flash anything. ROM Manager will let you install CWR or Goo Manager will let you install TWRP (which is what I use).
Click to expand...
Click to collapse
Yes, I highly recommend TWRP.
Sent from my SPH-D710 using xda premium
HeadBlader911 said:
Yes, I highly recommend TWRP.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I tried using TWRP but when I installed it through GooManager it installed the d2can version so I couldn't install CM10. Unless there is a way to manually select which TWRP version to install through GooManager, then I'm more or less stuck on CWM.
edit: Just got TWRP for d2att installed so now I can flash whatever I want, man TWRP seems a lot better than CWM!
Hi,
I can't flash this ROM onto my N5100: [ROM][N5100]Official CM 10.2[JLS36I][11/18/13]
I have twrp 2.6.0 installed and everytime I try to install the zip it says error executing updater binary in zip and it fails.
Also tried this with other recovery, but always getting the same error.
I must be doing something fundamentally wrong, can anyone help me out?
Thanks for any hints.
Try the version of TWRP that I made here or one of civatos CWM recovery.
Cool, thanks, worked like a charm. :good:
nickdollahz said:
Try the version of TWRP that I made here or one of civatos CWM recovery.
Click to expand...
Click to collapse
Another solution
500e said:
Hi,
I can't flash this ROM onto my N5100: [ROM][N5100]Official CM 10.2[JLS36I][11/18/13]
I have twrp 2.6.0 installed and everytime I try to install the zip it says error executing updater binary in zip and it fails.
Also tried this with other recovery, but always getting the same error.
I must be doing something fundamentally wrong, can anyone help me out?
Thanks for any hints.
Click to expand...
Click to collapse
Here is another solution.
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.
dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.
Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.
Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.
Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.
Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.
Okay so after a boot loop because of some mistake when my device was still on 4.1, I installed a new 4.4 room from sammobile. I rooted my device, flashed a custom recovery and when I tried to install bliss rom, it failed. I tried to install vaniraosp but I'm still getting the same results. Logcat fails to generate and an error always shows up. It also says that my device is n511 when in fact it is n5120.
It looks like you flashed a 5110 ROM after going to kitkak.
You may have to repartition and start a clean firmware load again.
gooberdude said:
It looks like you flashed a 5110 ROM after going to kitkak.
You may have to repartition and start a clean firmware load again.
Click to expand...
Click to collapse
Im pretty sure I flashed a 5120 rom. I'm able to use mobile data and in the "about device" it shows 5120
Or he use a wrong recovery.
User_99 said:
Or he use a wrong recovery.
Click to expand...
Click to collapse
Im using cwm. Im having some trouble with philz recovery