Develop Bugs

[Q] VZW CDMA Galaxy Nexus DIAG Mode

Does anyone happen to know the command to enter DIAG mode? So that I can get a com port to enter my settings using QPST or CDMA Workshop.

blueagewizard said:
Does anyone happen to know the command to enter DIAG mode? So that I can get a com port to enter my settings using QPST or CDMA Workshop.
Click to expand...
Click to collapse
I looked at the store and couldn't find a quick way to do it. No phoneutil.
Anyways just purchased one, so I'll keep looking.

im still trying too, its not easy to do like most phones would be

*#*#4636#*#* pulls up testing mode if thats what you're looking for.

that doesnt help us any plus all lte phones have that, that's a given

Played around with USB tethering and thought it might bring up a modem or com port. No luck there.

okeefferd said:
*#*#4636#*#* pulls up testing mode if thats what you're looking for.
Click to expand...
Click to collapse
can this be used to force the phone into evdo only rather than ehrpd?

Someone that owns one PM me and I will help to get diag. I want to get diag on this thing but do not have one.

i tried to use ##8778#,**87284
but they r didn't work!
if you geta,please share it to me. thanks

After some research I've found so far
Calendar Debug Receiver - 225
Email Broadcast Receiver - 36245
RlzDebugBroadcast - 759
Checkin - 2432546
Reboot - 947322243
System Update Service - 46
- 7867
Gtalk Diagnostics - 8255
TestingSettings - 4636
Enable - 8351
Disable - 8350
RTN_View - 786
PhoneDataService - 66236 (OMADM?)

My gn froze today. Before I pulled the battery I wanted to try ad reboot. When I plugged it into my PC it started loading drivers its never installed before. One driver was for a modem (not the one for USB tether). There were 2 more drivers trying to load, but I pulled the battery and don't remember their description.
If my phone freezes again I will get more details.
Sent from my Galaxy Nexus using xda premium

I own a Galaxy Nexus if anyone has any questions. Lets get this thing into diag mode!

crackers8199 said:
can this be used to force the phone into evdo only rather than ehrpd?
Click to expand...
Click to collapse
Theoretically, but it does not work/stick.
Edit: It didn't for me anyway.

So has anyone had any luck yet? I just got this phone and was hoping to flash it to metro but I cant get it into DIAG. I was thinking that maybe we could put phoneutils back into the system through a rom or something like that?

VIA chipset... Not Qualcomm. You'd have to use diff. software than QPST / CDMA WS as well.

Hi I am not sure about the VZW galaxy nexus Biyi definitely got into diag mode on the sprint galaxy nexus via *#*#3424#*#*, I'm the past though with Samsung devices VZW and sprint differ. The main problem I had was that once plugged into a USB port there are no appropriate VIA diag drivers.

Drivers are here: http://www.mydroidfiles.com/downloads/TBH/SamsungFlashingUtility.7z
I "restored" my VZW GNex to the sprint build with the posted CWM stock sprint files and was able to access this menu as well as *#*#3282#*#* & *#*#000000#*#* (000000 is vzw msl). I was able to load the modem drivers but I do not see a Diag device looking for drivers.
Using the SamsungPSTLite app in the above archive I was able to "see" some QPST style data but it does not look editable.
VPST is used by others to edit via chipsets. I do not have a copy of this though so am still on the hunt. Wanted to pass along what I have found so far.
-saridnour

Someone posted information about VPST here...
http://www.cricketusers.com/request...atosphere-full-flash-cricket-2.html#post54139

Well I poked around and found a few things with the tool, but I made the mistake and hit a write by accident and looks to have corrupted my nvram. My MEID is now blank as well as all data in settings -> about. Sadly I can no longer use the *# codes above to get back into a mode (corrupt nv??) that I can restore what I had earlier backed up So heed this as a warning and if you have any ideas to correct this please let me know. My device works fine outside of the above and no connection to a carrier..
I ODIN'ed to factory and retraced my above steps.. ultimatley flashing CWM back to the same sprint software I had backed up but still no hidden menu commnads *# other than: *#06# shows no MEID and *#*#4636#*#* pulls up its usual as it did on the default vzw build).
Anyone know how to force a dialup modem connection other that the *#diag command? or a tool to force the *# commands? Or better yet another way to restore default nv settings?
-saridnour

Did you try *#*#33284#*#* ? You need your MSL though.

[Q] Help to get MSL SPC

I have a Sprint Samsung Galaxy S2 previously flashed for Cricket. I am the second owner. Now I have decided to flash to PagePlus. I tried to find my MSL. I got one but the fist "digit" looks like a squared zero and the rest are normal zeros.I tried 3 different methods and got the same result. Six digits with a squared zero and 5 normal zeros. Any ideas?

Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Try flashing back to a stock GB Rom and using the terminal emulator getprop method. Should work that way.
Sent from my SPH-D710BST using xda premium

Like I said earlier, I have tried 3 different methods and I have downgraded and upgraded and played around with it and have received the same result.

Have you tried this? http://forum.xda-developers.com/showthread.php?p=32396596
Flash the FI03 bin. See if that works.
Sent from my SPH-D710 using xda premium

graydiggy said:
Have you tried this? http://forum.xda-developers.com/showthread.php?p=32396596
Flash the FI03 bin. See if that works.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
That doesn't work for his issue.
fixsony said:
I have a Sprint Samsung Galaxy S2 previously flashed for Cricket. I am the second owner. Now I have decided to flash to PagePlus. I tried to find my MSL. I got one but the fist "digit" looks like a squared zero and the rest are normal zeros.I tried 3 different methods and got the same result. Six digits with a squared zero and 5 normal zeros. Any ideas?
Click to expand...
Click to collapse
I'll help you out cause i had to go through hell and back to get the answer for that. No one could really help me out lol i just kept searching and searching till i got lucky. Do you know how to use CDMA applications? Do you know how to get into the TW menu so you can access your phone through your computer as a modem?
Download the CDMA Workshop App
Code:
Put your phone on Diag Mode,connect the usb cable
look in device manager and see if 'SAMSUNG Mobile USB Serial Port (COMX)
is there,
Open CDMA WS,Select the (COMX),Connect "do not read"
Click on Security Tab,in "Password 16 Digits" select the lower box,
enter the 16 digit password samsung default:01F2030F5F678FF9
the phone will unlock and your MSL code is going to show in the
SPC Box just above "Read and SPC" tabs.
Credit goes to @mrctony on these forums.
http://www.youtube.com/watch?v=uFvdmwDw3Vw&feature=youtu.be
If the read function does not work then click that "S" above the SPC button and put in 000000 (6 zeros) in the box and select write spc to phone
Make sure the password box to the left of the spc box says Samsung and you copy and paste this password from the code above. The read function is not going to work for you like it didn't for me but the writing function will work if you have the phone in DIAG mode and able to be read from the CDMA app. Hope this helps! Let me know the outcome by quoting me so i get a notification from this thread.

need help flashing to cricket using linux

So I had my usb charging port detach from the board on my phone. I got a new one, (well used but new to me) and it was flashed to VERIZON but unrooted, bootloader locked, and s-on. On my computer at home i couldn't get the phone to communicate with the computer using windows 7 64 bit. I had flashed and rooted the old phone so I'm not exsactly new to this. For some weird reason I could not get the NEW phone to communicate with the computer with the same drivers from my old phone. I went to a different computer and the drivers loaded fine. however upon flashing the configuration file from my old phone, (a configuration file obtained off this forum, the qpst cricket configuration file) to the new phone using QPST the phone did not recive ANY service (cricket or verizon). I have no bars at all. upon reading the phone through QPST all the settings took to the phone but theres no service or 3g. After several attempts to load the configuration file to the phone at one point i had 2 bars light up briefly indicating that there was service then disappear and cant get service.
Would using linux to flash the phone help? I couldn't find anything on google or the search bar on here on how to use linux to flash the phone to cricket.
Only possible thing I can think of on why I cant get any service to this phone is i have yet to deactivate the old phone. is it possible cricket is blocking any service to this phone because the MIN is already registered to my old phone?
I know this post is kind of confusing so please let me know if theres any way I can clairify it.

Well using qpst on linux is not very easy. Windows is your best bet. Also to get full service cricket must change your service to your new phones esn. Or you have to clone the esn which xda does not allow us to talk about on their fourm due to legal reasons.
Now if you have everything set correctly you should be able to get data to work but sms, mms, and cell service is all linked to esn. If you are getting now bars I am willing to bet your prl needs to be changed.
I have flashed several Og evos and 3d evos. Along with doing the unmentionable (cloning). Check your messages I will send you a pm with some information on flashing to cricket.
Sent from my PC36100 using xda app-developers app

jlmancuso said:
Well using qpst on linux is not very easy. Windows is your best bet. Also to get full service cricket must change your service to your new phones esn. Or you have to clone the esn which xda does not allow us to talk about on their fourm due to legal reasons.
Now if you have everything set correctly you should be able to get data to work but sms, mms, and cell service is all linked to esn. If you are getting now bars I am willing to bet your prl needs to be changed.
I have flashed several Og evos and 3d evos. Along with doing the unmentionable (cloning). Check your messages I will send you a pm with some information on flashing to cricket.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
I need to rephrase my statment. The problem isn't not getting service to the phone the problem is not getting ANY SIGNAL at all. and im using the qpst settings for cricket off this forum. But i may have found out the problem. I looks like the phone may have been updated, i just saw some options on the phone my old one did not have. Sprint optimizer plus the roaming settings were set to sprint only. BTW cricket doesn't care if a phones ESN is clean or not.

which rom are you using? did you change the prl when you flashed over to cricket? did you change the msl code? you actually dont need a computer at all to flash the phone. on any of the stock rooted roms yo ucan change the needed settings right from the phone itself using the dialer codes. ##data# #, #7786#, ##000000#, etc etc.

haxin said:
which rom are you using? did you change the prl when you flashed over to cricket? did you change the msl code? you actually dont need a computer at all to flash the phone. on any of the stock rooted roms yo ucan change the needed settings right from the phone itself using the dialer codes. ##data# #, #7786#, ##000000#, etc etc.
Click to expand...
Click to collapse
Stock Rom.
Yes I did can't remember off the top of my head which prl.
Not sure what the msl code is, if its the same as the MIN that I called cricket for I used the same one as my old phone, should that be different with different phones? (min number)
I did not know that about flashing using only the phone. I'm not sure what is search for, to find that tutorial so if you'd be so kind to link me to one or write a quick step by step for that is be super grateful as Windows 7 (64bit) decided to not have the drivers work anymore from when I flashed my old phone. I've read everything on installing the drivers and tried many different versions of drivers including ones off here. I've tried reinstalling Windows multipul times. I tried using Linux (mint) and virtual machine (xp) but can't get Linux to communicate with the phone. And after using a friends computer and getting the drivers working with win 7 I loaded my old config file for qpst, the config file for qpst for cricket off here, and tweaking different settings, no signal and no 3g.
I've been working on this for several days and am getting tired of having a palm computer that only works on WiFi, so as said, a link for flashing using the phone only or you taking time to write one up, (it doesn't have to be pretty) would have me owing you BIG TIME.
Something else I've noticed on my, "new" used phone is that it runs significantly slower than my old one did. Hitting home key with no widgets running can cause the phone to take a good 5 seconds to load. Hitting the app drawer can take also a good 5 seconds to load all the apps.
BTW ##7786# didn't seem to do anything but I think I edited ##000000# correctly putting my MIN in both fields....unless there's supposed to be a 1 in the begining. Not sure what the data settings are supposed to be.

Calbha said:
Stock Rom.
Yes I did can't remember off the top of my head which prl.
Not sure what the msl code is, if its the same as the MIN that I called cricket for I used the same one as my old phone, should that be different with different phones? (min number)
I did not know that about flashing using only the phone. I'm not sure what is search for, to find that tutorial so if you'd be so kind to link me to one or write a quick step by step for that is be super grateful as Windows 7 (64bit) decided to not have the drivers work anymore from when I flashed my old phone. I've read everything on installing the drivers and tried many different versions of drivers including ones off here. I've tried reinstalling Windows multipul times. I tried using Linux (mint) and virtual machine (xp) but can't get Linux to communicate with the phone. And after using a friends computer and getting the drivers working with win 7 I loaded my old config file for qpst, the config file for qpst for cricket off here, and tweaking different settings, no signal and no 3g.
I've been working on this for several days and am getting tired of having a palm computer that only works on WiFi, so as said, a link for flashing using the phone only or you taking time to write one up, (it doesn't have to be pretty) would have me owing you BIG TIME.
Something else I've noticed on my, "new" used phone is that it runs significantly slower than my old one did. Hitting home key with no widgets running can cause the phone to take a good 5 seconds to load. Hitting the app drawer can take also a good 5 seconds to load all the apps.
BTW ##7786# didn't seem to do anything but I think I edited ##000000# correctly putting my MIN in both fields....unless there's supposed to be a 1 in the begining. Not sure what the data settings are supposed to be.
Click to expand...
Click to collapse
yeah sorry that code is supposed to be ##786#
some of the other codes you might want o use to confirm that your settings are correct are
##786# - EPST - Status Menu
##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##3424# - Diagnostic - Connect to phone in diag mode (im sure you already know that one)
##72786# - changes DSA back to Factory
*#*#4636#*#* - Phone Information - "Phone information, Battery information, Battery history, Useage statistics, Wifi information"
thats all i can remember at the moment.

haxin said:
yeah sorry that code is supposed to be ##786#
some of the other codes you might want o use to confirm that your settings are correct are
##786# - EPST - Status Menu
##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)
##3424# - Diagnostic - Connect to phone in diag mode (im sure you already know that one)
##72786# - changes DSA back to Factory
*#*#4636#*#* - Phone Information - "Phone information, Battery information, Battery history, Useage statistics, Wifi information"
thats all i can remember at the moment.
Click to expand...
Click to collapse
*#*#4636#*#* if this can be edited this might be able to be fixed in this menu however upon dialing this the number cleared like it was about to do something but it didn't do anything. was this the correct code?

The code is correct.
Now here is a very handy code but it does not work with every rom. ##775# it allows you to change prls. You will need to know the msl code and if you are on a rooted rom you can use msl reader from the market. You will also need to download cricket prls and put them on your SDcard.
Sent from my PC36100 using xda app-developers app

[Q] Sprint SG3 Rooted help with TWRP

http://www.andromods.com/root-unlock/sprint-galaxy-s3-kitkat-ota-root-nd8.html
Download the CF-Auto-Root exploit from official Chainfire’s site here, look for SPH-L710 model.
A Sprint Galaxy S3 smartphone (SPH-L710) running official Android 4.4.2 from OTA.
Unzip the “CF-Auto-Root-d2spr-d2spr-sphl710.zip” it until you find a file with .tar.md5 extension and an odin executable (*.exe) file.
Run the Odin by double-clicking the executable file.
Soon after the Odin window comes out, click on “PDA” button and look for a “.tar.md5″.
Look at Option area, make sure the Repartition option not checked.
Grab your phone, then put it in download mode, with this magic combo key (Volume down + Home + Power). You’ll get a warning, opt to continue.
Attach the phone to your PC via USB cable. At this stage, Odin should find out your phone, if not, there’s should be a problem with your phone’s drivers.
Now you’re ready, click on the “Start” button, the flashing procedure should done in minutes, but don’t ever interrupt the process. Once the Odin shows a PASS, the phone will reboot on its own.
Once fully boots up, update your SuperSU apps via Play Store, and run it. Now your Sprint Galaxy S3 running KitKat ND8 should rooted at this point.
im am on the stock rom 4.4.2 like above has told me. at this point and now.
ok so i have root checker and says that i am rooted and i can use superSU just fine and file explore accepts root.
downloaded busybox and installed download and TWRP manager is on my phone . now when im in TWRP it brings up a teamwin in the back ground and a side bar for home classic backup live backup restore install TWRP manger and reboot options and settings . i also have goo manager i dont know what to do step by step and have been looking on rootjunkys web site for answers but that build is diff since im on sprint and 4.4.2 .. stock . my problem is my single keeps going from 2 bars of 3g to and x . i can even get pasted the activation . im on straight talk for a service provider. so pretty much i can make phone calls or msg or data . sometimes it works then 5 sec later fails. i had that prob on the droid but when i switched to cm11 everything was fine a dandy . so plz advise me what to do next or where i went wrong. oh and i can get into recovery but have no idea what to do when i get there or what i can use it for. i have been told there is no boot-loader lock on this device so no need to worry about that . i never got the MLS code but i dont need since im rooted and can obviously get some type of single or it would be blocked. my phone number shows up in status info under about phone. i dont know any key codes to set the prl or apns like i do on the droid bionic with a gsm network . im a software dev in training for eclipse but none of my fellow students know how so i gotta ask my main guys at XDA. plz help. also why cant i see dev options in my device . i wanna set up my own PRL and stuff idk help me plz.
in the past i have rooted and loaded and unlocked the boot loader and switched radio bands on a moto droid bionic . i can do that all because i understand how to use safe strap . and i have patched it perfect with a build prop so im not a complete noob im just stuck on the new stuff. also flash roms for cm11 works great but im stuck on the SG3. THX guys

Ben Hype-Man Ricks said:
http://www.andromods.com/root-unlock/sprint-galaxy-s3-kitkat-ota-root-nd8.html
Download the CF-Auto-Root exploit from official Chainfire’s site here, look for SPH-L710 model.
A Sprint Galaxy S3 smartphone (SPH-L710) running official Android 4.4.2 from OTA.
Unzip the “CF-Auto-Root-d2spr-d2spr-sphl710.zip” it until you find a file with .tar.md5 extension and an odin executable (*.exe) file.
Run the Odin by double-clicking the executable file.
Soon after the Odin window comes out, click on “PDA” button and look for a “.tar.md5″.
Look at Option area, make sure the Repartition option not checked.
Grab your phone, then put it in download mode, with this magic combo key (Volume down + Home + Power). You’ll get a warning, opt to continue.
Attach the phone to your PC via USB cable. At this stage, Odin should find out your phone, if not, there’s should be a problem with your phone’s drivers.
Now you’re ready, click on the “Start” button, the flashing procedure should done in minutes, but don’t ever interrupt the process. Once the Odin shows a PASS, the phone will reboot on its own.
Once fully boots up, update your SuperSU apps via Play Store, and run it. Now your Sprint Galaxy S3 running KitKat ND8 should rooted at this point.
im am on the stock rom 4.4.2 like above has told me. at this point and now.
ok so i have root checker and says that i am rooted and i can use superSU just fine and file explore accepts root.
downloaded busybox and installed download and TWRP manager is on my phone . now when im in TWRP it brings up a teamwin in the back ground and a side bar for home classic backup live backup restore install TWRP manger and reboot options and settings . i also have goo manager i dont know what to do step by step and have been looking on rootjunkys web site for answers but that build is diff since im on sprint and 4.4.2 .. stock . my problem is my single keeps going from 2 bars of 3g to and x . i can even get pasted the activation . im on straight talk for a service provider. so pretty much i can make phone calls or msg or data . sometimes it works then 5 sec later fails. i had that prob on the droid but when i switched to cm11 everything was fine a dandy . so plz advise me what to do next or where i went wrong. oh and i can get into recovery but have no idea what to do when i get there or what i can use it for. i have been told there is no boot-loader lock on this device so no need to worry about that . i never got the MLS code but i dont need since im rooted and can obviously get some type of single or it would be blocked. my phone number shows up in status info under about phone. i dont know any key codes to set the prl or apns like i do on the droid bionic with a gsm network . im a software dev in training for eclipse but none of my fellow students know how so i gotta ask my main guys at XDA. plz help. also why cant i see dev options in my device . i wanna set up my own PRL and stuff idk help me plz.
in the past i have rooted and loaded and unlocked the boot loader and switched radio bands on a moto droid bionic . i can do that all because i understand how to use safe strap . and i have patched it perfect with a build prop so im not a complete noob im just stuck on the new stuff. also flash roms for cm11 works great but im stuck on the SG3. THX guys
Click to expand...
Click to collapse
you said you can get into recovery but which recovery is that?

6th_Hokage said:
you said you can get into recovery but which recovery is that?
Click to expand...
Click to collapse
ok im rooted and on 4.4.2 sprint sph-l710 stock rom and did the whole Call # # 7 2 7 8 6 # that straight talk sent me . the only thing next for me to do is back up my current rom or set up and load a fast yet good stable rom . im also on a stuck point of the prl when you enter the msl # i can get into it but i don't know what info i needs to change for straight talk which they are really using net 10 cdma. in other words the only info they sent me was the ##72786# but no other set up info . (like when i set up my droid bionic i went in and changed Create a new APN with the following values:
APN Name: Straight Talk
APN: tfdata
Port: 80
MMSC: http://mms-tf.net
MMS Proxy: mms3.tracfone.com
MMS Port: 80
Delete the current APN from your phone.
Reboot your phone.
)
i dont know what to change on cdma after entering the MSL .
so summary is i need
1. back up rom instructions using TWRP the correct way just encase i boot loop or brick it again. (i got lucky the first time)
2. load a fast performing rom yet nice like 5.0 LP
3. what info needs to be changed after entering the MSL code.
Thanks

Getting DM + Modem + ADB working 5.1.1 ok1

I've successfully unlocked my Note 4 and I'm trying to get it to work with AT&T LTE, now I am following this guide here
http://forum.xda-developers.com/note-4/general/enabling-additional-lte-bands-att-t-t3160864
and I have looked everywhere to try to figure out how to get DM to work on Lollipop with the sm-n910p. A lot of places say to go into recovery and select DM Logging, but that option is not there when I go into the stock recovery for OK1. Does anyone know how to get here?
Thanks!

@ssjgoku24
I'm unlocked also, and use att. And i have tried similar guides here: http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
And
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
But i couldn't get it to stick. I don't know if it'll work on our device.
Before i continue I must state this is very dangerous and can hardbrick your device. I almost did myself. You have been warned!
Anyhow, use galaxy tools or idone unlock app to access hidden menu, then select 'phone util' and 'usb settings' from there. I've attached pics.
If you attempt, and get it to work please let me know. But like I already stated, this is very risky. Good luck and hope this helps.

Thanks for the info. I did already try doing that, but my computer never recognized the DM. So i was not able to use software. I'll try some more things once i get a chance, and I'll be sure to post results if in successful or not and what i did.

ssjgoku24 said:
Thanks for the info. I did already try doing that, but my computer never recognized the DM. So i was not able to use software. I'll try some more things once i get a chance, and I'll be sure to post results if in successful or not and what i did.
Click to expand...
Click to collapse
Oh. I just remembered, when i tried this(it was a while ago) i used Efs Pro to switch to the right usb setting. Cause if you read all of the guide i used. It states that official roms block us from changing this. I do believe i was using Cm12 on my phone. Then used efs pro to switch phone usb to diagnosis mode (or whatever it is).
Here's link http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546

So i was on vacation and finally got around to trying some things out. First using EFS Pro i was able to get my phone to show up as a samsung communication port in device manager. I am not sure if that is correct since in QPST it didn't show up as a diag port, i had to manually add it as COM4 (5 was also there and tested). I was able to see my phone but when i did a software download, it said the system was busy and if i hit "switch to" it would open the start menu, then pop backup. Doing this 3 times would then atart the download. Once the download hit 12% it would error out stating like "could not communicate in diag mode." This leads me to believe the phone is not actually getting set to diag mode. I have also tried to read the phone with another tool in QPST, but it always fails to read.
I tried double checking the settings using *#0808# and making sure dm + modem + adb was activated which it was. I also tried RDNIS + DM + Modem which resulted in the COM port changing to 8 & 9 but gave the same results.
When you tried QPST did you recieve these errors?
Note - I used the stock rooted ok1 rom , firmware, and baseband. I tried pd1 stock rooted rom, firmware, and baseband as well.
I was also using this in a windows 10 vm and tried on a windows 7 vm, since I have a Mac running osx.

ssjgoku24 said:
I've successfully unlocked my Note 4 and I'm trying to get it to work with AT&T LTE, now I am following this guide here
http://forum.xda-developers.com/note-4/general/enabling-additional-lte-bands-att-t-t3160864
and I have looked everywhere to try to figure out how to get DM to work on Lollipop with the sm-n910p. A lot of places say to go into recovery and select DM Logging, but that option is not there when I go into the stock recovery for OK1. Does anyone know how to get here?
Thanks!
Click to expand...
Click to collapse
How did you get it unlocked? I'm having trouble with sprint and wont unlock note 4 its payed off no longer with sprint would like to use it.