Develop Bugs

[ROM] MIUI V5 + LTE Fix Guide

First let me say I am not a developer. I have been here a long time and what one would call a Flash-o-Holic/Themer. I always revert back to MIUI on every phone i've had. (Evo,S2,S3,Note,Note 2) and Now the S4 - Except noone had made MIUI for our phone. So, I dove in on the I9505 ROM and found a way to make it work... Flawlessly.
Follow the following steps:
Get ROM: http://forum.xda-developers.com/showthread.php?t=2306650
Get Gapps: http://goo.im/devs/ibotpeaches/miui...miuiandroid_gapps-4.2.2-small_signed-8012.zip
Thank Developer: http://forum.xda-developers.com/member.php?u=569047
Optional (if you have custom kernal locked in this helped me)
Get Kernel: http://downloadandroidrom.com/file/...IDremoved/MDL/SetUIDRestrictRemovedKernel.zip
Once you have everything place it all on your ext-sd
I used OUDhs recovery:
Wipe everything 2x
Format system, data, cache.
Install: Kernal
Reboot right back into OUDhs
Wipe everything 2x
Install ROM
Reboot
Once ROM is up and settled reboot into recovery
Wipe cache/davlik once
Install Gapps
Reboot
Go to setting, mobile networks, Network type selection and choose LTE - It will then kick on - Data, sms, and mms working see attachments
I would not expect the original dev to support us on this, but its a great build and works seamlessy with our phones - If
you have any questions or need help I'll do the best I can for you!!
System will show I9505 but M919 baseband
All ROM Credit goes to Bmarko82
{GUIDE for LTE Enable}
Please follow instructions carefully:
Download Odin 3.07 (to your pc):: http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
Download Modem (to your pc):: https://www.dropbox.com/s/2tqulm421o9b745/modem_CWM_UVUAMDL.tar?m
Power off Phone, power off and reboot by pressing and holding volume down and power till phone is in download mode
Press volume up to continue
Start Odin on PC
Plug phone into PC
Click on PDA and find modem
Click start and let it run.. the phone will reboot
Unplug Phone
Go to Settings/Mobile Networks/Access Point Names/click on T-mobile >
Change the following:
APN to: fast.t-mobile.com
Proxy: Not Set
Port: Not Set
APN Type: Not Set
APN Protocol: IPv4
Press Menu, Select Save
Go To Dialer - put in *#*#4636#*#*
Go To Phone info
Set Preferred Network to: LTE/GSM auto (PRL)
Press back until out of dialer.
Do not reboot Phone.
If you have to reboot at some point you will have to go back into the dialer and change it from gsm auto to lte/gsm again..

Reserved...

1st!!!!

Sorry for the request but in the future can you make a 4.3 version please
Sent from my GT-I9505G using xda premium

MrPapito429 said:
Sorry for the request but in the future can you make a 4.3 version please
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
If you know anything about MIUI it is not open source, we dont get to decide.. see miui.us
Also MIUI is unlike any other ROM.. It almost might as well be classified as a different operating system.

MIUI the iOS of the android world

Adam0524 said:
MIUI the iOS of the android world
Click to expand...
Click to collapse
Lol exactly what I call it
---------- Post added at 05:17 PM ---------- Previous post was at 05:05 PM ----------
So question, the link you are directing us to download from is in the original thread on 9505...9505 kernel works on our phone? Im confuse. Do we need to flash another kernel or something? How exactly did you make this compatible for Tmobile GS4 if we are downloading exactly the original rom? And also we are suppose to install the kernel first before installing the actual rom?
Sorry I'm a muiu virgin ^.^
P.S hows the camera?

Sweetness. Been a long time since I ran a miui build (Inc). Looking forward and appreciate this
Sent from my Nexus 7 using XDA Premium 4 mobile app

mgbotoe said:
Lol exactly what I call it
---------- Post added at 05:17 PM ---------- Previous post was at 05:05 PM ----------
So question, the link you are directing us to download from is in the original thread on 9505...9505 kernel works on our phone? Im confuse. Do we need to flash another kernel or something? How exactly did you make this compatible for Tmobile GS4 if we are downloading exactly the original rom? And also we are suppose to install the kernel first before installing the actual rom?
Sorry I'm a muiu virgin ^.^
P.S hows the camera?
Click to expand...
Click to collapse
Yes the 9505 miui kernal works on ours, I listed it as optional because ( I myself was on darthstalker, Infamous Kernal), and thru my trial and error I found by resetting the factory Kernal and rebooting recovery and writing over it with Miui rom it finally loaded..
P.s. The camera is sweet pinch to zoom etc..
Also: I never said I made it compatible, it already was.. sorta... I just figured out how to make it work on our phones without errors...

Just follow the steps exactly..
Formatting is essential.. If you get just the S4 logo.. Reboot recovery and try again you missed something..
If you get the Miui logo but no boot.. Reboot recovery and try again, you missed something...
Sent from my GT-I9505 using XDA Premium App

Thanks op for sharing this, installed with no problem. Everything is so far so good
Sent from my GT-I9505 using xda premium

I have been running this on my T-Mo s4 for a week now and it's been running very smooth. No random reboots, no fc's etc. Good battery life. The Play store may give you issues initially but clear data and cache of play store, reboot and you should be good.
yes MIUI is the iOS of Android, all we can hope is Hugo Barra can get MIUI to be open source
All in all a pretty good and smooth rom. you do not need any other kernel. stock kernel is pretty good.

How difficult would it be to switch back with no problems from twiz to this? I'm curious to check it out but pretty sure it wouldn't be my dd. Just remember losing me imei on my s3 and don't want to go through that nightmare again. Lol I had to buy a cheap pc to fix my phone
Sent from my SGH-M919 using xda app-developers app

Just flashed this. Thanks for the good instructions. :good:

Will definitely try this!!!! Always loved MIUI!!
Sent from my SGH-M919 using xda app-developers app

My data is bouncing from 3G and h+. Haven't seen LTE. Notice the APN doesn't have fastT-Mobile. Using the stock kernel.
Sent from my GT-I9505 using xda app-developers app

sweets55 said:
My data is bouncing from 3G and h+. Haven't seen LTE. Notice the APN doesn't have fastT-Mobile. Using the stock kernel.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Yeah, same thing happened to me yesterday.
I changed it to fast.tmobile.com but nothing.

theexel said:
Yeah, same thing happened to me yesterday.
I changed it to fast.tmobile.com but nothing.
Click to expand...
Click to collapse
Miui is notorious for mis-display on your signal.. Just run speed test...
Sent from my GT-I9505 using XDA Premium App

tylerholbrook said:
How difficult would it be to switch back with no problems from twiz to this? I'm curious to check it out but pretty sure it wouldn't be my dd. Just remember losing me imei on my s3 and don't want to go through that nightmare again. Lol I had to buy a cheap pc to fix my phone
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
As easy as booting into recovery, wipe, and install... Those issues are gone.
Sent from my GT-I9505 using XDA Premium App

voredroid said:
Miui is notorious for mis-display on your signal.. Just run speed test...
Sent from my GT-I9505 using XDA Premium App
Click to expand...
Click to collapse
I think the last time I uses MIUI was on my Samsung Vibrant, lol.
Anyway, OP.. you might consider uploading a flashable zip to change the build.prop to SGH-M919 jfltetmo, or even upload the ROM with it included.
Or they can change it manually, meh, lol.

[Kernel][Sense] *ZombiFly* Kernel .02 [JB 4.2.2]

ZombiFly kernel will be kept at a feature minimum. First time getting into kernel development. You can ask for features but they will not always make it into this kernel. Please keep this thread clean. Thanks
Features:
Version .02
sound control
voltage control
Version .01
System r/w
fastcharge
intellidemand and wheatley
noop, deadline,row,cfw,bfq,sio,fiops
Downloads:
ZombiFly Kernel - http://flyhalf205.com/?dir=kernels/m7wlv
Stock recovery with system r/w - http://flyhalf205.com/getdownload.php?file=kernels/m7wlv/ZombiFly-Stock.zip
Source:
https://github.com/Flyhalf205/android_kernel_m7wlv
XDA:DevDB Information
ZombiFly, a Kernel for the Verizon HTC One
Contributors
Flyhalf205
Kernel Special Features:
Version Information
Status: Stable
Created 2013-11-22
Last Updated 2013-11-23

Mine.
Once again. I am cut short of time right now so will fix up OP and make 2nd kernel.

Nice job man! :good:

I have been waiting for kernels to get built! Thanks a bunch!
Sent from my HTC6500LVW using XDA Premium 4 mobile app

What app is recommended for kernel options?

Beat me to it. Building now. Thanks for this! Options are a good thing.
Sent from my Oney Bone.

brymaster5000 said:
Beat me to it. Building now. Thanks for this! Options are a good thing.
Sent from my Oney Bone.
Click to expand...
Click to collapse
Will be putting in sweep to wake and the HTC logo button hopefully tonight.
Sent from my HTC6500LVW using Tapatalk

Flyhalf205 said:
Will be putting in sweep to wake and the HTC logo button hopefully tonight.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Cool. I will get OC and governors in, if you don't mind me cherry picking and viceversa if you need to (as you are a million times better at this than me).

brymaster5000 said:
Cool. I will get OC and governors in, if you don't mind me cherry picking and viceversa if you need to (as you are a million times better at this than me).
Click to expand...
Click to collapse
Yeah man go for it. I will be adding tons of stuff in tonight.

Flyhalf205 said:
Will be putting in sweep to wake and the HTC logo button hopefully tonight.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Awesome!!

mine.

Flyhalf205 said:
Will be putting in sweep to wake and the HTC logo button hopefully tonight.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Really hope these get added to cm 11.

Chilidog said:
Really hope these get added to cm 11.
Click to expand...
Click to collapse
I won't be doing any aosp kernel. This one may work on it but will not be supported for aosp.
synisterwolf said:
mine.
Click to expand...
Click to collapse
You need one? Lol
Sent from my HTC6500LVW using Tapatalk

Will these work on 4.3 ROMs? Sorry if that's a dumb question.

Chilidog said:
Really hope these get added to cm 11.
Click to expand...
Click to collapse
I have posted my custom AOSP kernel with these options in other threads. It is compatible with cm 11. Here is a link to the newest build: http://www.projectelite.net/actngrezy/buck/gummy/kernels/m7/kk/elite_m7-11_21_2013.zip

Flyhalf205 said:
I won't be doing any aosp kernel. This one may work on it but will not be supported for aosp.
You need one? Lol
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Subscribed. ^_^
Sent from my iPhone 5 using Tapatalk 4

buckmarble said:
I have posted my custom AOSP kernel with these options in other threads. It is compatible with cm 11. Here is a link to the newest build: http://www.projectelite.net/actngrezy/buck/gummy/kernels/m7/kk/elite_m7-11_21_2013.zip
Click to expand...
Click to collapse
So I don't have a computer with me right now but could I flash the zip in Flashify or extract the boot img and flash that in Flashify? Also could I do this over my current rom without losing any information?

Chilidog said:
So I don't have a computer with me right now but could I flash the zip in Flashify or extract the boot img and flash that in Flashify? Also could I do this over my current rom without losing any information?
Click to expand...
Click to collapse
no need for flashify. It is a kernel only so it wont mess with your current ROM install. Just download and flash in recovery. It is in any kernel format so you wont see a boot img in the zip. It extracts the current boot img from your current rom, unpacks it(splits it into the kernel and ramdisk) and then repacks it with my kernel and the roms ramdisk. As with anything else, make a backup before flashing.

buckmarble said:
no need for flashify. It is a kernel only so it wont mess with your current ROM install. Just download and flash in recovery. It is in any kernel format so you wont see a boot img in the zip. It extracts the current boot img from your current rom, unpacks it(splits it into the kernel and ramdisk) and then repacks it with my kernel and the roms ramdisk. As with anything else, make a backup before flashing.
Click to expand...
Click to collapse
I flashed the kernel, however I am having trouble controlling it. Since the rom I am on (TikTak) doesn't have any built in control for the kernel am I just wondering what my options are..
Sent from my One using Tapatalk

nexusisneecesary said:
I flashed the kernel, however I am having trouble controlling it. Since the rom I am on (TikTak) doesn't have any built in control for the kernel am I just wondering what my options are..
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Trickster Mod, from the Play Store.

[KERNEL|TW|4.3|MK2] Stock MK2 kernel [exFat|init.d] [11/27/2013]

This is for the SGH-M919/jfltetmo/T-Mobile Samsung Galaxy S4 Variant with TouchWiz 4.3 firmware.
This is the STOCK kernel from yesterday's update. It is fully stock with init.d and exFat support. SELinux = enforcing
Click to expand...
Click to collapse
MediaFire | MEGA
8.28MB MD5: BA64A1A86BF2BC5E21679558352F0027
* I am not responsible for anything that may happen to your phone other than the desired effect. *​
Things to note:
Will break your wifi if you are on MDL bootloaders with MK2 modem/NON-HLOS.bin.

You rock, broski!
Sent from my SGH-M919 using Tapatalk

asimons81 said:
You rock, broski!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm using it on X-Note Freedom build v 2.0 (MK8) and air gestures work!

Looking forward to trying your ROM when it drops.
Sent from my SGH-M919 using Tapatalk

@omnifarious I'm on your 1.4 deodexed with the mk2 modems, this kernel broke my wifi, i flashed back and was fine.... Just letting you know thanks for your work!!

DylanTheVillian said:
@omnifarious I'm on your 1.4 deodexed with the mk2 modems, this kernel broke my wifi, i flashed back and was fine.... Just letting you know thanks for your work!!
Click to expand...
Click to collapse
I'm just trying to give back to a community from where I've learned a great deal in flashing and now developing. Thank you for the heads up.

By the way, I've tried unpacking the boot.img and editing the init.rc and setting "setenforce" to 0 but it still remains as enforcing.
If a dev could point me in the direction of a guide I will gladly compile from source, I just don't know how.
Sent from my SGH-M919 using Tapatalk

omnifarious said:
By the way, I've tried unpacking the boot.img and editing the init.rc and setting "setenforce" to 0 but it still remains as enforcing.
If a dev could point me in the direction of a guide I will gladly compile from source, I just don't know how.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Get in touch with Jamisson. That guy is like a living walking ..Whatchumakallit

I just don't get why the stock kernel for 4.3 rom is giving us issues with wifi but I am trying to see if I could fix it myself ...I will report my findings if any

BlackGURU said:
Get in touch with Jamisson. That guy is like a living walking ..Whatchumakallit
Click to expand...
Click to collapse
James and I went to middle school together. I think I have him as a friend on my other Facebook. =]
Sent from my SGH-M919 using Tapatalk

Cyanogenmod CM11

Don't know if you guys know but they have a nightly for this device now check it out here is the link.. http://download.cyanogenmod.org/?type=nightly
Sent from my SGH-T999 using XDA Premium 4 mobile app

HolyGhostBoy1 said:
Don't know if you guys know but they have a nightly for this device now check it out here is the link.. http://download.cyanogenmod.org/?type=nightly
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Installed last night running really well so far. Android build number is 4.4.1, so looks like Cyanogen team has already incorporated Google's latest source.

looked good save for wifi
Mr. Struck said:
Installed last night running really well so far. Android build number is 4.4.1, so looks like Cyanogen team has already incorporated Google's latest source.
Click to expand...
Click to collapse
I noticed some comments on the download saying after installing they fell into a boot loop, but I didn't have any problems like that. Only two issues I saw was rom mgr was gone and wifi couldn't get past "...turning on" (even after a reboot).
I went ahead and went back to my backup and will give cm11 a try every day or so - the wifi thing I suspect will work itself out.

Flashing CM11.zip Problem
mine is having issues flashing the rom, anybody know i running TWRP recovery could be my issue? Thanks in advance
im flashing this since this morning i flashed the newest CM 10.2 nightly and it some how it broke all my gapps and could only fix it to where the phone worked except most Google apps, therefore i decided to do a full wipe and istall CM11 but it is not flashing

chombombo said:
mine is having issues flashing the rom, anybody know i running TWRP recovery could be my issue? Thanks in advance
im flashing this since this morning i flashed the newest CM 10.2 nightly and it some how it broke all my gapps and could only fix it to where the phone worked except most Google apps, therefore i decided to do a full wipe and istall CM11 but it is not flashing
Click to expand...
Click to collapse
Most likely yes, TWRP is the culprit. Try Philz Touch 6.0.0.8, it has been amazing for me. Make sure to do a complete wipe of system, Dalvik-cache, and cache, the option on Philz is called "complete wipe to install new ROM" and then make sure to flash 4.4 GApps as well.

Mr. Struck said:
Most likely yes, TWRP is the culprit. Try Philz Touch 6.0.0.8, it has been amazing for me. Make sure to do a complete wipe of system, Dalvik-cache, and cache, the option on Philz is called "complete wipe to install new ROM" and then make sure to flash 4.4 GApps as well.
Click to expand...
Click to collapse
Philz Touch worked perfectly. Thanks! now im running 4.4.1 and its running pretty smooth i must say. Two things i didnt not find was the capability to change the brightness with the notification bar and the option to remove the name of the apps on the home screen. If anybody finds a work around lemme know thanks in advance.
Cyanogenmod did a hell of a good job on this update!

chombombo said:
mine is having issues flashing the rom, anybody know i running TWRP recovery could be my issue? Thanks in advance
im flashing this since this morning i flashed the newest CM 10.2 nightly and it some how it broke all my gapps and could only fix it to where the phone worked except most Google apps, therefore i decided to do a full wipe and istall CM11 but it is not flashing
Click to expand...
Click to collapse
you want to make sure you are using twpr 2.6.3.1
http://techerrata.com/browse/twrp2/d2spr
flash it with mobile odin
---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
chombombo said:
Philz Touch worked perfectly. Thanks! now im running 4.4.1 and its running pretty smooth i must say. Two things i didnt not find was the capability to change the brightness with the notification bar and the option to remove the name of the apps on the home screen. If anybody finds a work around lemme know thanks in advance.
Cyanogenmod did a hell of a good job on this update!
Click to expand...
Click to collapse
A lot of CM features don't get ported between CM versions immediately

paychex said:
you want to make sure you are using twpr 2.6.3.1
http://techerrata.com/browse/twrp2/d2spr
flash it with mobile odin
---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
A lot of CM features don't get ported between CM versions immediately
Click to expand...
Click to collapse
Is it stable ROM or is it buggy.
Sent from my SPH-L710 using XDA Premium 4 mobile app

Frostacious said:
Is it stable ROM or is it buggy.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Daily driver so far
Sent from my SM-T217S using Tapatalk 4

check the link everyday cause they update it everyday.

How's the camera? There were a lot of issues with the unofficial versions.
Sent from my SPH-L710 using Tapatalk

supasanch24 said:
How's the camera? There were a lot of issues with the unofficial versions.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
+1

HolyGhostBoy1 said:
Don't know if you guys know but they have a nightly for this device now check it out here is the link.. http://download.cyanogenmod.org/?type=nightly
Sent from my SGH-T999 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I update them as they come out with twrp script fix here: http://forum.xda-developers.com/showthread.php?t=2562623

Is MMS working for all you sprint users?
SPH-L710, CM 4.4, Kt747, OKJ.

Jonny Wad said:
Is MMS working for all you sprint users?
SPH-L710, CM 4.4, Kt747, OKJ.
Click to expand...
Click to collapse
Just sent one through Hangouts
Sent from my SM-T217S using Tapatalk 4

paychex said:
Just sent one through Hangouts
Sent from my SM-T217S using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the reply. How about through the messaging app?
SPH-L710, CM11, Kt747, OKJ.

supasanch24 said:
How's the camera? There were a lot of issues with the unofficial versions.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
the cameras fine. the original CM 11 had some bugs like the front facing camera freezing up a phone and causing a reboot but the newest updates based off Google's release of 4.4.1 which was to fix bugs with the camera on the Nexus 5 they have fixed all camera issues and it even takes photos/focuses faster than before.

anybody able to use ART runtime, mine just reboots but it doesn't change it. my nexus 7 with CM11 does run ART though, any luck?
everything seems to be working fine and super fast. calendar wasn't syncing but today's update thru the playstore fixed it for me. camera seems the same to me.
running 12-1013 nightlie.
Sent from my SPH-L710 using XDA Premium 4 mobile app

chombombo said:
anybody able to use ART runtime, mine just reboots but it doesn't change it. my nexus 7 with CM11 does run ART though, any luck?
everything seems to be working fine and super fast. calendar wasn't syncing but today's update thru the playstore fixed it for me. camera seems the same to me.
running 12-1013 nightlie.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have read that if you use GAPPS, you need to flash a special ART compatible version if you want to use the ART runtime.

rocket321 said:
I have read that if you use GAPPS, you need to flash a special ART compatible version if you want to use the ART runtime.
Click to expand...
Click to collapse
it was the same GAPPS i used on my Nexus 7 tho, ohh well, im gonna have to read up on it, i did try looking for info here at xda but couldnt find much, didnt have much much time to look though.
I just Installed the newest nightly and Xposed Installer+GravityBox(KK) to make up for the past CM features such as controlling the brightness witht the status bar and changing the launching application on the notification bar's Time & Date. One feature I am still missing is removing the names of the apps on the homescreen... If you like extra features and modifications to your guy's phone i highly recomment Xposed+Gravitybox. Here is the link for who ever is interested: http://forum.xda-developers.com/showthread.php?t=1574401
Im loving 4.4 even with a broken screen which i hoping to abandon soon, but it really feels like a new phone and new experience, i know there wasnt much change but still

[Q&A] Tweaked Lollipop Note 3 Coming soon

Q&A for Tweaked Lollipop Note 3 Coming soon
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Tweaked Lollipop Note 3 Coming soon. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

is this a rom a can flash?? do I have to flash any extra stuff??

You don't have to flash anything Extra at the moment it can be use as daily driver bugs still being repair update are coming
Sent from my SM-N900T using XDA Free mobile app

MasterX007 said:
You don't have to flash anything Extra at the moment it can be use as daily driver bugs still being repair update are coming
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Idk what I did wrong i flashed then i was stuck at a bootload at the samsung note 3 screen..... But this has happen with all the tw lollipop roms i have tried to flash so i dont know what i am doing wrong

desean93 said:
Idk what I did wrong i flashed then i was stuck at a bootload at the samsung note 3 screen..... But this has happen with all the tw lollipop roms i have tried to flash so i dont know what i am doing wrong
Click to expand...
Click to collapse
What model of Note 3 are you using and recovery you using?

MasterX007 said:
What model of Note 3 are you using and recovery you using?
Click to expand...
Click to collapse
I have a Tmobile note 3 and i am using philz touch recovery

desean93 said:
I have a Tmobile note 3 and i am using philz touch recovery
Click to expand...
Click to collapse
in philz rec choose the option wipe to install clean rom and flash the Rom aafter just reboot the device let it boot its normal for it to take up to 10 minutes during the first boot
I am also on N900T it is working great

MasterX007 said:
in philz rec choose the option wipe to install clean rom and flash the Rom aafter just reboot the device let it boot its normal for it to take up to 10 minutes during the first boot
I am also on N900T it is working great
Click to expand...
Click to collapse
Ok.... Will try again So I dont need to flash a kernal?? For some reason I believe my problem is the kernal because any time I flash a custom rom and dont flash a kernal the rom doesnt want to boot up and Im stuck on the note 3 screen

desean93 said:
Ok.... Will try again So I dont need to flash a kernal?? For some reason I believe my problem is the kernal because any time I flash a custom rom and dont flash a kernal the rom doesnt want to boot up and Im stuck on the note 3 screen
Click to expand...
Click to collapse
no need to flash a kernel one is already provided in the Rom

MasterX007 said:
no need to flash a kernel one is already provided in the Rom
Click to expand...
Click to collapse
Ok.... Thank you so much!!! I will give it another try after this one didnt work... I had given up but I will try and flash again.... I will let you know the turnout

Thanks for the ROM. I'll be testing and report back on how it works for me.
One issue I immediately see if that wifi seems to not be working for me. Every time I try and turn it on, it is either greyed out and I can't toggle it, or if I am able to toggle it, it just doesn't do anything. I rebooted, still same issue. I think I flashed it properly (I wiped data, cache, dalvik, system), but I may try flashing again.
Has anyone else had this problem and is there a fix for this?
EDIT: Did a second full wipe and flash and still no wifi. Everything else seems to work connection wise, airplane mode, bluetooth, mobile data, just not wifi.

Already fix that problem
A new update should be here soon it is being uploading to mega wifi is fix
Sent from my SM-N900T using XDA Free mobile app

MasterX007 said:
Already fix that problem
A new update should be here soon it is being uploading to mega wifi is fix
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Yup. That fixed it. Thanks.

I'm not having success getting Xposed Framework running on this ROM. Is there a way to get it working? Screenshot included.

want know how fix the heating and the loudness twerkv1 for n900t android 5.0
please can anyone tell me how to fix or conf the sound on this rom please

Techngro said:
I'm not having success getting Xposed Framework running on this ROM. Is there a way to get it working? Screenshot included.
Click to expand...
Click to collapse
Not yet compatible. Gotta wait for Xposed developer to make it compatible.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
mr adrian said:
please can anyone tell me how to fix or conf the sound on this rom please
Click to expand...
Click to collapse
You can look in the ROM thread for a fix...on page 4 or 5.

DPI change?
Hey, the ROM is still going smooth. No real issues so far (except my battery life isn't as good as before, but it's not terrible or anything).
I have been trying to change the DPI on this ROM, but I have not been able to make it stick. I have tried using the build prop editor app as well as directly editing the build prop via ES File Explorer. Neither has worked. Has anyone been able to change their DPI or is there something specific that I need to do to get it working?

Techngro said:
Hey, the ROM is still going smooth. No real issues so far (except my battery life isn't as good as before, but it's not terrible or anything).
I have been trying to change the DPI on this ROM, but I have not been able to make it stick. I have tried using the build prop editor app as well as directly editing the build prop via ES File Explorer. Neither has worked. Has anyone been able to change their DPI or is there something specific that I need to do to get it working?
Click to expand...
Click to collapse
Look in your battery stats see whats causing it
Sent from my SM-N9005 using XDA Free mobile app

I keep getting "invalid argument" when I try to download the mixerpath.xml for normal sound.. Is there another link for it?

bigdreco said:
I keep getting "invalid argument" when I try to download the mixerpath.xml for normal sound.. Is there another link for it?
Click to expand...
Click to collapse
Alright im going to post another link
Sent from my SM-N9005 using XDA Free mobile app