Develop Bugs

Impossible to get network operator

I flashed CM10.1 on my S3 and had the same problem as others where data was intermittent. It worked for some time and after one nightly, I lost my IMEI. So I got back to stock, used the procedure with QPST and got back my IMEI. I got back to cm10.1 and unsurprisingly, I had a hard time having data. But worst off, I had a hard time having cell connection anymore, not even voice or sms. Tried AOKP without any luck. Tried different modems, not luck either. Now I went back to stock and still doesn't work. There's something that is not resetted between flash of ROM that keeps messing up my connection. I also found out that only one network provider is ever found, one is Rogers Wireless (I'm with Bell), or one is EXT. But never any other provider is ever found. And also in *#*#4636#*#* under phone info I can'T change the radio band like I can on the phone of my girlfriend.
So there it is. I'm stuck. I don't really want to buy another phone. It is a software issue for sure. But how can we solve that? Is there any way to restore the EFS to factory default? Could it be buried there? What is the ERI? Could it be that? My stock ROm says that it can't get the ERI version.
Any help is welcome.

my stock telus ERI is unavailable but i think thats normal... i have no problems
from what i understand imei and apn settings are the things to check into

24680 said:
my stock telus ERI is unavailable but i think thats normal... i have no problems
from what i understand imei and apn settings are the things to check into
Click to expand...
Click to collapse
IMEI and APN are good. IMEI will get me data, but I can't even get a cell connection now. No radio at all.

whats your radio band set to?
if i set mine to anything but automatic it wont find networks like yours..
*#*#4636#*#* dont work on my telus s3.
i use a different method
*#197328460# then
UMTS > Debug Screen > Phone control > Network Control > Band selection >
Automatic...
beware what you change in here as there is no return to default

24680 said:
whats your radio band set to?
if i set mine to anything but automatic it wont find networks like yours..
*#*#4636#*#* dont work on my telus s3.
i use a different method
*#197328460# then
UMTS > Debug Screen > Phone control > Network Control > Band selection >
Automatic...
beware what you change in here as there is no return to default
Click to expand...
Click to collapse
Neither of the two works. *#*#4636#*#* was working with CM10/10.1 and AOKP. But not with stock. And the one you suggest after is not working either.
But I remember going ot *#*#4636#*#* before flashing stock rom and I wasn't able to selet any band. On my girlfriend's android phone (HTC) I can.

if it were me.. i would try reflashing stock again... after flashing stock do a factory reset thru recovery... seems to help for clean stock setup.
if still no network i would check that band selection is set to automatic.
maybe someone else with more experience would have a better idea.
you mentioned you changed your band selection and now cant change it back.
i dont think flashing stock changes this.
i think that might be your problem.
ifso you first need to fix phone to use *# code... i have no idea why its not working
it works on my stock telus 4.0.4 and 4.1.1
maybe bell blocks from using *#code?

ebfortin said:
I flashed CM10.1 on my S3 and had the same problem as others where data was intermittent. It worked for some time and after one nightly, I lost my IMEI. So I got back to stock, used the procedure with QPST and got back my IMEI. I got back to cm10.1 and unsurprisingly, I had a hard time having data. But worst off, I had a hard time having cell connection anymore, not even voice or sms. Tried AOKP without any luck. Tried different modems, not luck either. Now I went back to stock and still doesn't work. There's something that is not resetted between flash of ROM that keeps messing up my connection. I also found out that only one network provider is ever found, one is Rogers Wireless (I'm with Bell), or one is EXT. But never any other provider is ever found. And also in *#*#4636#*#* under phone info I can'T change the radio band like I can on the phone of my girlfriend.
So there it is. I'm stuck. I don't really want to buy another phone. It is a software issue for sure. But how can we solve that? Is there any way to restore the EFS to factory default? Could it be buried there? What is the ERI? Could it be that? My stock ROm says that it can't get the ERI version.
Any help is welcome.
Click to expand...
Click to collapse
if i were u i would first try your girls sim in your phone and vise versa and if no luck do the qpst instructions to regain LTE not imei .and if u still cant manually find network operator after that i would format both sd cards and odin back to stock rooted and do the imei injection again for the hell of it and the LTE fix ..and stay on stock rooted or 4.1.2 until u get this figured out cause 4.2 builds are gonna have more probs then 4.1...I know u are having cell connect probs and these instructions are for imei and data but it sounds like your out of options....i lost imei once and had to manually inject with qpst and my reception was one bar til i did the LTE fix and it worked awesome..one more thing is my phone will not select a radio band ever unless i manually select my network operator first or i have no sim card in phone..i have also had sim cards crap out for no apparent reason..good luck
edit. my bad i thought your girl also had gs3..maybe the sims are still the same

stuey25 said:
if i were u i would first try your girls sim in your phone and vise versa and if no luck do the qpst instructions to regain LTE not imei .and if u still cant manually find network operator after that i would format both sd cards and odin back to stock rooted and do the imei injection again for the hell of it and the LTE fix ..and stay on stock rooted or 4.1.2 until u get this figured out cause 4.2 builds are gonna have more probs then 4.1...I know u are having cell connect probs and these instructions are for imei and data but it sounds like your out of options....i lost imei once and had to manually inject with qpst and my reception was one bar til i did the LTE fix and it worked awesome..one more thing is my phone will not select a radio band ever unless i manually select my network operator first or i have no sim card in phone..i have also had sim cards crap out for no apparent reason..good luck
edit. my bad i thought your girl also had gs3..maybe the sims are still the same
Click to expand...
Click to collapse
Thanks for your answer. Really appreciated. I've flashed so much time that I don't see the point of doing it again. I also had, at some point, to inject my IMEI and it worked with QPST.
What I find really strange is that a stock reflash doesn't put everything back to when I bought the phone. Funny thing, after the flash, it knew what my Wi-Fi router password was! So obviously there are some part of the config that is not overwritten. Which I find odd.
I also started playing with the service menu and found a lot of settings for the radio band. No luck yet.

ebfortin said:
Thanks for your answer. Really appreciated. I've flashed so much time that I don't see the point of doing it again. I also had, at some point, to inject my IMEI and it worked with QPST.
What I find really strange is that a stock reflash doesn't put everything back to when I bought the phone. Funny thing, after the flash, it knew what my Wi-Fi router password was! So obviously there are some part of the config that is not overwritten. Which I find odd.
I also started playing with the service menu and found a lot of settings for the radio band. No luck yet.
Click to expand...
Click to collapse
Your WiFi password could have been restored by google just like it puts your contact info back.
If you are doing a Odin to stock that should wipe it clean.

stuey25 said:
if i were u i would first try your girls sim in your phone and vise versa and if no luck do the qpst instructions to regain LTE not imei .and if u still cant manually find network operator after that i would format both sd cards and odin back to stock rooted and do the imei injection again for the hell of it and the LTE fix ..and stay on stock rooted or 4.1.2 until u get this figured out cause 4.2 builds are gonna have more probs then 4.1...I know u are having cell connect probs and these instructions are for imei and data but it sounds like your out of options....i lost imei once and had to manually inject with qpst and my reception was one bar til i did the LTE fix and it worked awesome..one more thing is my phone will not select a radio band ever unless i manually select my network operator first or i have no sim card in phone..i have also had sim cards crap out for no apparent reason..good luck
edit. my bad i thought your girl also had gs3..maybe the sims are still the same
Click to expand...
Click to collapse
This thing is so strange. There's only one network that my phone can see now, and it is 302720. Bell is 302610. No other network is visible. And since I'm with Bell, then I can't connect to 302720. I'm in for emergency calls only. That's why I thought it may have to do with radio. But it seems Rogers (302720) and Bell use the same bands. A channel maybe? But this should be all automatic! It's a pretty stupid bug let me tell you!
Maybe a SIM card issue? That would be quite a coincidence that it happen exactly when I'm playing with ROMs...

RUNNERX said:
Your WiFi password could have been restored by google just like it puts your contact info back.
If you are doing a Odin to stock that should wipe it clean.
Click to expand...
Click to collapse
Ah that's a good possibility. I didn't know it was saving passwords as well.
So if it wipes clean, how come this bug stays? There is obviously something that is not wiped and overwritten or else it would work.

How can one tell if someone losses their IMEI number? Unable to make phone calls? No 4g/ lte?
Sent from my SGH-I747 using xda app-developers app

Deggy said:
How can one tell if someone losses their IMEI number? Unable to make phone calls? No 4g/ lte?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
When you go to info about your phone, in status you usually have your IMEI number. It'll show 0 if it's corrupted. Or sometimes it's a generic IMEI dans is used when the real one is unknown. It's 049 something I think.
Without an IMEI number you can do phone call. But you'll never have a data connection.

Today,no mobile service - have worked hard for solution - no success

Hi there
I am in New Zealand, recently rooted with DR Ketan’s help and installed PhilzCWM. Also on Ketan’s advice, I backed up my EFS.
My problem: just today I realised I cannot send text, or make phone call. I am on X-Note ROM from 3-4 days ago. I am very sure that after installation, I had normal Mobile connectivity and was surprised to find I didn't. Not sure if my EFS became corrupted, or other ROM setting is wrong.
Under Settings About Device:
My SERVICE STATE says Out of Service
My Mobile NETWORK STATE says disconnected.
My phone number says UNKNOWN
What's weird is
My IMEI lists a long number, assumed correct and not corrupted
So if my EFS partition is corrupted I assume I wouldn't see any IMEI at all?
Far as I know my SIM is activated (I am on a company plan & coworker's phones are normal)
Just now I restored my stock nandroid and .... same thing! No service. So I doubt it's even a modem problem.
Guys I'm screwed, any tips what settings to check etc??

sounds like your IMEI is invalid. i had something random recently. all my flatmates use iphone 4s. they had no signal when @ home. cant send texts etc. wifi works.
then next day my LTE N2 did the same thing. I changed MODEM/BASEBAND problem corrected it self. went back to old MODEM/Baseband. no problems since.
only other thing i can think of is, someone has reported your IMEI to police or your provider..
does it say "NOT REGISTERED" ? or something similar where your provider name appears?

R0B3RTF1SH3R said:
sounds like your IMEI is invalid. i had something random recently. all my flatmates use iphone 4s. they had no signal when @ home. cant send texts etc. wifi works.
then next day my LTE N2 did the same thing. I changed MODEM/BASEBAND problem corrected it self. went back to old MODEM/Baseband. no problems since.
only other thing i can think of is, someone has reported your IMEI to police or your provider..
does it say "NOT REGISTERED" ? or something similar where your provider name appears?
Click to expand...
Click to collapse
Hey thanks for th tip.
My phone recognises Vodafone as my provider but still won't connect.
I will try flashing a different modem, I may not have paid enough attention to different versions when I flashed the aroma installer.
Thanks, I'll report back.

update: Vodafone shop confirms my SIM is 100% good, and it works in another phone. So I think you're right, my IMEI is fukt.
I was told by Voda that my proper IMEi is listed on my phone innards. The IMEI shown in phone settings is waaay different. So it's corrupted somehow. I gotta familiarise myself with how to flash my backup image. Damn just what I need on beer day Friday

I restored my backup image of EFS/IMEI - it solved my problem.
Because there was an IMEI listed in phone settings I wrongly assumed it was the correct one. So flashing ROMS can muck up your EFS.....thank god for backups

you can still use the custom roms. just if your IMEI stuffs up, there is methods to reset it. i had to do it once. wasn't that difficult but was rather troublesome. i just wanted to use the custom rom at the time.

[Q] Band Handover/voice network issues

So I have been waiting patiently for the 4.3 update to roll out to me OTA with hopes that it would fix my issues but my phone has been saying download interrupted and so I have gone back to completely stock and triangle away to get my device status back to normal but it still wont let me download. When looking around for other possible causes I saw that my build number is JRO03L.I747UCDLK3 which comes up as a build number for a nexus 7, the correct build number for my att should be JRO03C. I have no idea how it got that way but I am wondering if the person who bricked it might have put the wrong version of the bootloader or some other part of the firmware on and it somehow didn't brick but is detecting a conflict and not letting me OTA. Or that is what is causing my cell network issues as well. Wanting input from a a few devs as I am not 100% sure what the first part of the build number represents.
Ok guys and girl, I am having a really weird issue with my Att Gs3 that I wanted to see if anyone could help with. To start off a little bit of background. I Hard bricked my s3 in August, sent it for tag and got it back working and stock with no issues. All I did was root the phone for fear of messing it up again but it was running all stock without problems for over a month since the unbrick. About 3 weeks ago I went out of town within the state but a ways away, I was talking on the phone with a co-worker right before leaving town. At some point that evening I get a a text from my wife asking why I was ignoring her calls, I had never received them and according to my phone was in the middle of prime 4g lte zone in San Antonio but I was apparently only receiving that lte signal and the phone was not switching to the voice network on 4g to make or receive calls, I was even able to voice chat with my wife but I couldn't just call her normally. After returning home I was still unable to make or receive calls unless it was right after a restart and I had to try about 15 times, so I called att and tried all of their bs which didn't make a difference at all. Looking around on the internet I found the number that you can put in to get into service mode and switched it to gsm or wcdma only and voila I could make calls again. The only problem with that being that I travel within a city for work and move from 4g to 3g to edge all the time but if I have it set for wcdma only then I have no signal and have to take the time to pull up service mode to switch back and forth. So I tried going back to completely stock again by resetting/ formatting all and flashing the stock rom via odin, my issue persisted so I also decided to flash synergy rom (which I was running prior to the hard brick) and then intergalactic because I saw the fewest problems with it to no avail. I have flashed each stock modem new and old which made no difference at all. Today I was messing around in service mode and found an area that was called handover, in that subsection you have the option for checking the phones ability to switch from gsm to wcdma and back as well as to hspa, when I select any of those options I get the message "temporary block due to build e" or " temporary block code".
I was wondering if anyone has any ideas about what the possible problem could be, imei, modem hardware, or a stubborn stuck modem firmware setting.
I was also wondering if anyone had any experience with figuring out how to re-enable handover because that is where I feel my problem is, either through adb or any programs that let me force change the settings, I would also be happy if someone knew how to turn of only LTE and have both gsm and wcdma on at the same time.
Any help would be much appreciated, I have tried everything I know how to do, but am to the point where I am forced to look at new hardware because my wife is pregnant and I really needs to be able to get a hold of me any time.

Bump
Bump!...not looking good.

madnesshero86 said:
Ok guys and girl, I am having a really weird issue with my Att Gs3 that I wanted to see if anyone could help with. To start off a little bit of background. I Hard bricked my s3 in August, sent it for Jtag and got it back working and stock with no issues. All I did was root the phone for fear of messing it up again but it was running all stock without problems for over a month since the unbrick. About 3 weeks ago I went out of town within the state but a ways away, I was talking on the phone with a co-worker right before leaving town. At some point that evening I get a a text from my wife asking why I was ignoring her calls, I had never received them and according to my phone was in the middle of prime 4g lte zone in San Antonio but I was apparently only receiving that lte signal and the phone was not switching to the voice network on 4g to make or receive calls, I was even able to voice chat with my wife but I couldn't just call her normally. After returning home I was still unable to make or receive calls unless it was right after a restart and I had to try about 15 times, so I called att and tried all of their bs which didn't make a difference at all. Looking around on the internet I found the number that you can put in to get into service mode and switched it to gsm or wcdma only and voila I could make calls again. The only problem with that being that I travel within a city for work and move from 4g to 3g to edge all the time but if I have it set for wcdma only then I have no signal and have to take the time to pull up service mode to switch back and forth. So I tried going back to completely stock again by resetting/ formatting all and flashing the stock rom via odin, my issue persisted so I also decided to flash synergy rom (which I was running prior to the hard brick) and then intergalactic because I saw the fewest problems with it to no avail. I have flashed each stock modem new and old which made no difference at all. Today I was messing around in service mode and found an area that was called handover, in that subsection you have the option for checking the phones ability to switch from gsm to wcdma and back as well as to hspa, when I select any of those options I get the message "temporary block due to build e" or " temporary block code".
I was wondering if anyone has any ideas about what the possible problem could be, imei, modem hardware, or a stubborn stuck modem firmware setting.
I was also wondering if anyone had any experience with figuring out how to re-enable handover because that is where I feel my problem is, either through adb or any programs that let me force change the settings, I would also be happy if someone knew how to turn of only LTE and have both gsm and wcdma on at the same time.
Any help would be much appreciated, I have tried everything I know how to do, but am to the point where I am forced to look at new hardware because my wife is pregnant and I really needs to be able to get a hold of me any time.
Click to expand...
Click to collapse
if you have CM recovery or TWRP you can go back, wipe everything even twice could help, then flash a stock rom reboot and see what happens
if that doesnt work go back to odin and install stock firmware 4.1.2 from Samsung but again you have to wipe data/factory reset
3rd if that doesnt work, try to restore your EFS folder/files using this link http://forum.xda-developers.com/showthread.php?t=1725839
that link has everything, how to fix it, anything you need to know
BUY a new phone or use a different phone if all the options above fail

Tried
View attachment 2362929
winosxbuntu said:
if you have CM recovery or TWRP you can go back, wipe everything even twice could help, then flash a stock rom reboot and see what happens
if that doesnt work go back to odin and install stock firmware 4.1.2 from Samsung but again you have to wipe data/factory reset
3rd if that doesnt work, try to restore your EFS folder/files using this link http://forum.xda-developers.com/showthread.php?t=1725839
that link has everything, how to fix it, anything you need to know
BUY a new phone or use a different phone if all the options above fail
Click to expand...
Click to collapse
The backup restore/fix imei and data restore tools link doesn't go anywhere, does anyone have a link to the restore tool? The only version I can find is for the non us version of the s3.
I did at least use the tool for the 9300 to find out that I have some 000 for s/n and other numbers (see attachment)
is there a patch out for us gs3's to fix this like there is for the i9300?

madnesshero86 said:
View attachment 2362929
The backup restore/fix imei and data restore tools link doesn't go anywhere, does anyone have a link to the restore tool? The only version I can find is for the non us version of the s3.
I did at least use the tool for the 9300 to find out that I have some 000 for s/n and other numbers (see attachment)
is there a patch out for us gs3's to fix this like there is for the i9300?
Click to expand...
Click to collapse
I think I can help, I just need to pull up some files and I might get you the software or program I used to back -up and restore my EFS folder/files
Even fix it, so plz hang in there........will report back later on

Thanks a bunch, I am still trying all kinds of stuff but I feel pretty certain that the problem lies with a messed up efs and I don't think I have a backup unless doing a nandroid covers that as well, which I am not seeing that it does. Any further help is appreciated, is this something that a local cell repair shop can typically fix or is this a possible new phone situation?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

madnesshero86 said:
Thanks a bunch, I am still trying all kinds of stuff but I feel pretty certain that the problem lies with a messed up efs and I don't think I have a backup unless doing a nandroid covers that as well, which I am not seeing that it does. Any further help is appreciated, is this something that a local cell repair shop can typically fix or is this a possible new phone situation?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
this is the software/programme i used to back-up, recover or even fix my EFS files (if they are corrupt and can be used) NV items reader writer
type it on google and pretty sure you will find something , try different links and again am sure you will find a download
have you tried flashing the new 4.3 stock firmware and modem follow this link for everything http://forum.xda-developers.com/showthread.php?t=2498233 or you can wait for AT&T to release the official 4.3 firmware and that will be 100% satified to be stable and will fix all your EFS/IMEI problems FOR GOOD :laugh:
i have the NV items reader writer software that can fix your problems but i dont know how i can share it with you without breaking any rules
ULTIMATE/final solution send it to MOBILETECHVIDEOS and will fix it like its nothing, take it to samsung and have to play some ball, or BUY A NEW PHONE
tried kernels (idont think it will make any difference) but its good to check

I have tried all the other versions but will try the 4.3 what's the name of that software so I can try and find it or of you have drop box you could pm me the info and get it to me that way . In the meantime I found an fusion 2 for 38 bucks from att so I can get calls for the time being.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

madnesshero86 said:
I have tried all the other versions but will try the 4.3 what's the name of that software so I can try and find it or of you have drop box you could pm me the info and get it to me that way . In the meantime I found an fusion 2 for 38 bucks from att so I can get calls for the time being.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
NV items reader writer
type exactly as it is on google or here on XDA

New Info
See new info in OP Please, and before anyone says anything I have spent half the day searching with various keywords trying to find a fix so be kind if it seems obvious to you, I couldn't find it and I did try.

Bump

[Q] Cannot call or receive calls, but can text and use 4G

Ok so I did a ton of stuff to my phone like rooting, flashing different ROMS, but in the end I want to get my phone back to stock, so I flashed the stock firmware with LG Flash Tool but now I can't call anyone and incoming comes don't come through. I just get a "out of service area" after a while whenever I try calling someone. Texting works and internet works, and so does Wifi. Also, my time is 3 hours fast when it's set to automatic in the settings. I don't know why it's doing this. And my IMEI is 0. Here are some pictures of my settings. One more thing. Since I flashed the stock, in my android devices, Google doesn't recognize my old device anymore. It treats this phone like a new device now. Weird... Anyone know how I can fix this problem?
Oh and when I try to update my phone it gives me this: "Your phone is not registered yet"
So many problems, I'm so sad
(these are the images uploaded online if the attachments don't work)
postimg (DOT) org/image/yc356c9el/
postimg (DOT) org/image/ipnwgre97/

Do you have a EFS backup? Your IMEI is 00000000000000.... That's NOT the way it should be. Maybe the network provider blocks you from using the network because of an invalid IMEI (don't know for sure) but since you reflashed Stock ROM i don't think it's modem related...

I think I fixed it! I just used the kdz method of going back to stock instead of the tot/dll method and it fixed my problems! I got it from this thread if anyone else has the same problem:
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140

[Q] [VERIZON] Repaired IMEI, Updated with OTA, Phone keeps roaming...

Really not sure what to do here, and I'm starting to get very frustrated, especially since I know exactly what the issue is and I can't find a solution... So here is everything I did up to this point in detail. I wanted to go back to stock for a while, but I remembered not being able to update at all last time I tried this. I used the LG Flash Tool to go back to 10b (I think? Earliest firmware out there) It started when my phone would tell me that "My Device was not registered yet" in the System Update settings. I did some Googling and found out it was because my IMEI number was blanked out (All zeroes), and I found a tutorial that was for the G2, but worked for the G3, to repair the IMEI. I first rooted with the LG One Click Root Tool when I got to Lollipop, used the IMEI that was under my battery, converted it to HEX and injected it into my phone with RF_NV_Manager, which was installed with QPST by Quallcom. After doing this, my IMEI was fixed, it matched the same IMEI that was under the battery on my phone, though I never texted or called anyone from there so I never noticed anything strange. I was able to update to the latest official Lollipop firmware, but then my phone started telling me I left the home network. Thinking it was just a glitch or something, because I had roaming issues before on stock, I switched to a custom ROM since that fixed it last time before I even knew that IMEI's existed. That didn't fix it at all. I was on LiquidSmooth Alpha and my phone will still go to roaming, and the way I would fix it was to piss around with the mobile network settings and change them back, then I would get 4G LTE for a few minutes, but I would NEVER be able to call or text. Since it was a discontinued ROM, I thought I just got unlucky, so I went to an official Nightly for CM12.1. At the moment I have LTE but no calling or texting... Then I found out that these issues tend to occur after IMEI fixes, so what do I do? Can anyone point me to a proper tutorial on how to fix this? After looking, I ended up downloading and installing something called EFS Professional 2.1 but now I'm even more confused...
EDIT: I tried going into ADB and inputting "adb reboot nvrestore" but that didn't fix it... The site said it's based on a backup that was automatically created when the phone was first built but that was on a completely different forum for a different phone. Going to try to flash back to stock KitKat.
EDIT: Alrighty! I'm getting somewhere! I flashed back to 10B with the Upgrade DL option, before I used Board DL. I can call and text now, as well as LTE, and OTA updates work, but I'm just going to root and go straight to the Nightly CM12.1 that I wanted to go to in the first place.
EDIT3: That seems to have done the trick. For people who have had issues with roaming after IMEI repairs, try flashing your stock TOT with the Upgrade DL option, then root and install your preferred ROM.