Hi All,
I am trying to flash the FML Rom linked here, http://forum.xda-developers.com/showthread.php?t=2427087, everytime I go into CWM to flash it I get an error that reads
set_metadata_recursive: some changes failed
E: Error in /sdcard/0/cm-11-20131121-FML-toro.zip (status 7)
installation aborted
I would reply to the thread about the ROM however I am new here and cannot do it. Can anyone help me?
Make sure you have the latest CWM Recovery
http://www.clockworkmod.com/rommanager
jsgraphicart said:
Make sure you have the latest CWM Recovery
Click to expand...
Click to collapse
I downloaded the latest one from the play store and tried putting a different mod onto the phone. I got the same error.
What version of the Galaxy Nexus do you have? Are you using the right files for your device?
jsgraphicart said:
What version of the Galaxy Nexus do you have? Are you using the right files for your device?
Click to expand...
Click to collapse
You were right in the previous comment. i needed to update CWM. My mistake, thanks for helping me out.!
Related
Yesterday I try to update my GN from 4.1.2 to 4.2 using CWM to install the upate patch.
But get the following message when verifying the update patch:
--Installing: /sdcard/fdf06e8d71c7.signed-yakju-JOP40C-from-JZO54K.fdf06e8d.zip
Finding update package....
Opening update pakage...
Installing update...
Verifying current system...
assert failed: apply_patch_check("/system/lib/hw/power.tuna.so", "5452b798b4d319d3af27c55ba9d0ddc4b6fe6422", "e5c07efe10ed6cbc2306a087b31b685db8449564")
E: Error in /sdcard/fdf06e8d71c7.signed-yakju-JOP40C-from-JZO54K.fdf06e8d.zip
(Status 7)
Installation aborted.
I got the update patch in /cache/ I copied the patch to sdcard root and install zip with CWM. And I have tried to download the patch from google. Still got the same message.
My GN is 4.1.2 now and it is a stock rom updated from OTA.
Last time I failed to update the GN from 4.1.1 to 4.1.2 is due to the kernel. After I changed back to stock kernel it is fine to update with OTA and updated to 4.1.2
But this time I can't update it. Still got a red "!" when updating from OTA. And got this problem when using CWM recovery to update.
jamesbut said:
Verifying current system...
assert failed: apply_patch_check("/system/lib/hw/power.tuna.so", "5452b798b4d319d3af27c55ba9d0ddc4b6fe6422", "e5c07efe10ed6cbc2306a087b31b685db8449564")
Click to expand...
Click to collapse
system/lib/hw/power.tuna.so
Different hashes: 5452b798b4d319d3af27c55ba9d0ddc4b6fe6422;
e5c07efe10ed6cbc2306a087b31b685db8449564;
Restore the original file and re-install ota.
Sent from my i9250
bk201doesntexist said:
system/lib/hw/power.tuna.so
Different hashes: 5452b798b4d319d3af27c55ba9d0ddc4b6fe6422;
e5c07efe10ed6cbc2306a087b31b685db8449564;
Restore the original file and re-install ota.
Sent from my i9250
Click to expand...
Click to collapse
Ok....But where should I find this file? copy from perious system? or I can download from web ?
jamesbut said:
Ok....But where should I find this file? copy from perious system? or I can download from web ?
Click to expand...
Click to collapse
Both are valid options, just make sure permissions are set right.
Sent from my i9250
bk201doesntexist said:
Both are valid options, just make sure permissions are set right.
Sent from my i9250
Click to expand...
Click to collapse
I checked the /system/lib/hw. There is a file called power.default.so is it the original one?
jamesbut said:
I checked the /system/lib/hw. There is a file called power.default.so is it the original one?
Click to expand...
Click to collapse
Nope .. it's power.tuna.so for this error - got the same here and unfortunately i'm have no backup from it from 4.2.1 - replaced it some day when trying another kernel as this file is altering the governeur settings in some kind of way. even more crap is that it's not restoreable from a stock image as there was a patch in 4.2.1 applied to power.tuna.so ... so extracting it from an older image will not solve this problem..
so .. does someone has the actual power.tuna.so from 4.2.1 for us?
EDIT: I'm an idiot .. of cos there is a full image of 4.2.1 - i have extracted the power.tuna.so and replaced it accordingly - update is running fine now.
Shared for all of you here -> https://www.dropbox.com/s/cvq3kmipq2w7ym7/power.tuna.so
i have exact same problem((
a1exus said:
i have exact same problem((
Click to expand...
Click to collapse
*sigh*
Do what the previous poster said or read the stickies
Sent from my Nexus
bk201doesntexist said:
*sigh*
Do what the previous poster said or read the stickies
Sent from my Nexus
Click to expand...
Click to collapse
I'm using Verizon (toro) version and we only have 4.1.1, which I download but I'm not sure how I can extract file from system.img, can you or someone else explain please? thank you in advance, oh yeah I'm using OSX also have access to linux box too (scientific linux)
a1exus said:
I'm using Verizon (toro) version and we only have 4.1.1, which I download but I'm not sure how I can extract file from system.img, can you or someone else explain please? thank you in advance, oh yeah I'm using OSX also have access to linux box too (scientific linux)
Click to expand...
Click to collapse
Here is the 4.1.1 stock rooted OTA. It is a flashable zip. Flash in recovery. Wipe cache/dalvik only. Reboot then update to 4.2.2.
http://tinyw.in/FbcF
Toro | Xylon | AK Diamond
I just rooted my Galaxy Note 3, and i am trying to flash a custom rom. The problem is that when i enter recovery mode to flash it, it is the regular recovery mode and not the TWRP one. PLEASE HELP!:silly:
DL and install the TWRP app to your device?
pinoiryder said:
DL and install the TWRP app to your device?
Click to expand...
Click to collapse
Yes i did.
Then you would not have regular recovery, you can only have one at a time.
What method did you use to root? What recovery did you use?
TWEAKED 1.0 NOTE 3
ilieml than
pinoiryder said:
DL and install the TWRP app to your device?
Click to expand...
Click to collapse
krelvinaz said:
Then you would not have regular recovery, you can only have one at a time.
Click to expand...
Click to collapse
BACARDILIMON said:
What method did you use to root? What recovery did you use?
TWEAKED 1.0 NOTE 3
Click to expand...
Click to collapse
I FIXED IT AND IT WORKED!
i first rooted it using the Odin 3.09 method with this root: CF-Auto-Root-hltetmo-hltetmo-smn900t
then i used this site to fix it. just follow the directions.
wwwDOTtheandroidsoulDOTcom/latest-twrp-recovery-t-mobile-galaxy-note-3-android-4-4-compatible/
now all is fine!
sorry im new to this site so i cannot post urls yet
flashing rom
drugfreedrama said:
I FIXED IT AND IT WORKED!
i first rooted it using the Odin 3.09 method with this root: CF-Auto-Root-hltetmo-hltetmo-smn900t
then i used this site to fix it. just follow the directions.
wwwDOTtheandroidsoulDOTcom/latest-twrp-recovery-t-mobile-galaxy-note-3-android-4-4-compatible/
now all is fine!
sorry im new to this site so i cannot post urls yet
Click to expand...
Click to collapse
hi sorry I need some help flashing a rom as well, I am rooted using the latest twrp. trying to flash Temasek-cm11-v37 rom and I keep getting a message "failed" says unable to mount,open zip file, error flashing zip,, error flashing zip /externalZ_sd/Temasek-cm11. any help please?
flashing rom
hi sorry I need some help flashing a rom as well, I am rooted using the latest twrp. trying to flash Temasek-cm11-v37 rom and I keep getting a message "failed" says unable to mount,open zip file, error flashing zip,, error flashing zip /externalZ_sd/Temasek-cm11. any help please?
panitsos said:
hi sorry I need some help flashing a rom as well, I am rooted using the latest twrp. trying to flash Temasek-cm11-v37 rom and I keep getting a message "failed" says unable to mount,open zip file, error flashing zip,, error flashing zip /externalZ_sd/Temasek-cm11. any help please?
Click to expand...
Click to collapse
re-download then re-flash
Hi guys, please help me
I was trying to flash my S3 tmobile with CM 11, but I got an error "assert failed: getprop("ro.bootloader")"
I search on xda and flash the bootloader then I turn off the phone.
Now I cannot power up my phone, can't get into recovery mode or anything.
westlife2206 said:
Hi guys, please help me
I was trying to flash my S3 tmobile with CM 11, but I got an error "assert failed: getprop("ro.bootloader")"
I search on xda and flash the bootloader then I turn off the phone.
Now I cannot power up my phone, can't get into recovery mode or anything.
Click to expand...
Click to collapse
What Firmware were you running before you flashed CM 11?
FcHsChilD said:
What Firmware were you running before you flashed CM 11?
Click to expand...
Click to collapse
I don't remember. Before flashing CM 11, I didn't touch anything except rooting it by using this guide on android central (sorry, I can't post the link)
I think it will be the original
What exactly did ypu you flash? You can copy the link on your post, just put a few spaces in it. I have a feeling I know what happened but I cant be certain without knowing exactly what you flashed.
Did you ever update by taking any of the OTA's?
DocHoliday77 said:
What exactly did ypu you flash? You can copy the link on your post, just put a few spaces in it. I have a feeling I know what happened but I cant be certain without knowing exactly what you flashed.
Did you ever update by taking any of the OTA's?
Click to expand...
Click to collapse
Yes I did update to 4.3 from T-mobile OTA
I rooted though this guide http://androidcentral .us/2014/04/root-t-mobile-samsung-galaxy-s3/
I flash this firmware http://forum .xda-developers.com/showthread.php?t=2282603
westlife2206 said:
Hi guys, please help me
I was trying to flash my S3 tmobile with CM 11, but I got an error "assert failed: getprop("ro.bootloader")"
I search on xda and flash the bootloader then I turn off the phone.
Now I cannot power up my phone, can't get into recovery mode or anything.
Click to expand...
Click to collapse
westlife2206 said:
Yes I did update to 4.3 from T-mobile OTA
I rooted though this guide http://androidcentral .us/2014/04/root-t-mobile-samsung-galaxy-s3/
I flash this firmware http://forum .xda-developers.com/showthread.php?t=2282603
Click to expand...
Click to collapse
I don't consider myself an expert but did you read that post for what you flashed and how it says in big bold red letters DO NOT flash this if you are running latest 4.3.If I can make any assumptions on it you bricked due to flashing a previous bootloader(Doc correct me if I'm wrong..still learning)
Yup. If you flash those MD5 bootloaders on 4.3 you're bricked. You'll need to use the debrick thread stickied in development.
Okay thank you, I will try this thread http://forum.xda-developers.com/showthread.php?t=2439367
Btw, how can I fix the error "assert failed: getprop("ro.bootloader")" ?
You first need to know what firmware build you are on. Then edit the updater-script and replace one of the ones listed in the assert lines with yours.
Use caution though. There are reasons for these and only fo this if you are 100% certain it is safe to flash.
Hey guys i need some help. I took out my old Galaxy Grand Duos and thought about rooting it to get Android Kitkat ( I have an International version which has never been rooted before ). I rooted it successfully however I am facing problem with the CWM recovery. When i first installed it I was getting the 'No Command" error. I read on XDA that I need to perform a battery pull in order to get the CWM working. I did that and it worked but it only works when I use odin to flash it. Otherwise when ever I enter recovery I get the 'No Command' error. What should I do?
Secondly im trying to install this rom http://forum.xda-developers.com/showthread.php?t=2563557 . When i get the CWM working (by flashing it with Odin) there seems to be an error which prevents me from flashing this rom. The message I get is *Cant install this package on top of incapable data. Please try another package or run a factory reset. Error in (the file location and name) (Status 7) Installation aborted*
Thanks in advance
Can u tell us how did u root ur phone?
Trilochanaaya said:
Can u tell us how did u root ur phone?
Click to expand...
Click to collapse
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
metalmouth22 said:
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
Click to expand...
Click to collapse
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/galaxy-grand-duos/development/recovery-twrp-t2839237
http://forum.xda-developers.com/showthread.php?t=2437182
http://forum.xda-developers.com/showthread.php?t=2725019
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
Thanks, ill try this right now. Btw before making this thread i tried to download CWM's latest version from its website but it was not downloading properly. I guess the download file was incomplete.
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
These links are not working =/
metalmouth22 said:
These links are not working =/
Click to expand...
Click to collapse
Check now. Links fixed!
Hey again guys
Im trying to update my i9192 to the latest CM12 build (20150109) through my TWRP recovery.
It doesnt update, and I get an error message "E: Error executing updater binary in zip ...(theCM12 150109 zip file)"....
Help appreciated.....
boinep said:
Hey again guys
Im trying to update my i9192 to the latest CM12 build (20150109) through my TWRP recovery.
It doesnt update, and I get an error message "E: Error executing updater binary in zip ...(theCM12 150109 zip file)"....
Help appreciated.....
Click to expand...
Click to collapse
Hi there,
Here is arco's advice for install CM12:
Link: http://forum.xda-developers.com/gal...-i9195-cyanogenmod-12-0-nightlies-s4-t2994854
Install
1. Use ClockworkMod Recovery.
GT-I9190: http://forum.xda-developers.com/showthread.php?t=2398143
GT-I9195: http://forum.xda-developers.com/show....php?t=2364980
Warning: Only use this recovery to flash CM-12.0. Otherwise, you risk bricking your phone!
Click to expand...
Click to collapse
Good luck
Thanks!
Though the link you sent me seems to be for the other two Mini models... Not covering the i9192 duos!?
I found this though...
http://forum.xda-developers.com/showthread.php?t=2494435
Guess it will do the job!???
boinep said:
Thanks!
Though the link you sent me seems to be for the other two Mini models... Not covering the i9192 duos!?
I found this though...
http://forum.xda-developers.com/showthread.php?t=2494435
Guess it will do the job!???
Click to expand...
Click to collapse
Yes, sorry for misunderstanding.
Powered by CM12
boinep said:
Thanks!
Though the link you sent me seems to be for the other two Mini models... Not covering the i9192 duos!?
I found this though...
http://forum.xda-developers.com/showthread.php?t=2494435
Guess it will do the job!???
Click to expand...
Click to collapse
Flash just recovery, first reboot in recovery and flash cm12, and skip the rooting process and you will be fine