My A8 is stuck in the bootloop. What to do?
Background: I was using a custom ROM on my mobile. I wanted to sell the mobile, so I flashed the Stock ROM and UNROOT my device. I used it for 2 weeks, no issues. Today I wanted to reset it to factory setting so I went to setting>factory data reset and after that it is stuck in boot loop.
I have tried opening CWM by pressing Volume UP+power button but it is not opening.
It shows the company's logo and then android image which comes when installing ROM. (Android with progress bar)
What to do now? Any help would be much appreciated.
abdullahabidch said:
My A8 is stuck in the bootloop. What to do?
Background: I was using a custom ROM on my mobile. I wanted to sell the mobile, so I flashed the Stock ROM and UNROOT my device. I used it for 2 weeks, no issues. Today I wanted to reset it to factory setting so I went to setting>factory data reset and after that it is stuck in boot loop.
I have tried opening CWM by pressing Volume UP+power button but it is not opening.
It shows the company's logo and then android image which comes when installing ROM. (Android with progress bar)
What to do now? Any help would be much appreciated.
Click to expand...
Click to collapse
TRY power button+ volume up+volume down at a time
Related
Hi! First of all, I tried searching the forum, but I failed find any specific help on this. I hope someone can point me in the right direction, or knows how to solve this.
I tried to install manually an OTA uptade on my desire, and I think I may have screwed up something.
When I power up the phone, it's stuck in booting: boots, HTC logo comes up, vibrates, then the whole cycle starts.
I was able to get to the screen, with the skating droids, but when I tried to choose recovery, an image of a phone comes up with nothing but a red triangle.
Does anyone know how to fix this? Any help would be appreciated.
Stock android 2.2, rooted with unrevooked.
to leave the triangle-screen:
-press Volume up ("+") and the power-button.
-select "Reboot system now"
..and you're done!
tried that, but it still ends in an endless boot loop. Also tried factory reset.
Nevermind, looks like there was some kind of hiccup the first time. I started the OTA update manually (after leaving the triangle screen with the vol. up + power combo) and after some rebooting it wokrs now. And it's updated too. Thanks anyway!
deino said:
tried that, but it still ends in an endless boot loop. Also tried factory reset.
Click to expand...
Click to collapse
Google: red triangle of death.
Good luck.
Hi Guys.
So i flashed a few roms lately. started with EmotionMiUi then CM10, Omega, Alliance and well a few more.
i did a full wipe and cleared all caches each times and only had a few minor problems with the different ROMS that i was able to fix.
So i now returned to MiUi and have had it running for about a week. Tried some DPi modding yesterday, and did notice that it took longer time to boot and boot into recovery. i flashed the Xpose DPi remover, and continued using my phone. i have rebooted about 3 times today. And the last reboot caused the phone to enter the eternal "Samsung Galaxy Note II - N7100" boot static "animation".
Now i have tried pulling the battery several times, tried booting into recovery and the only thing that will let me boot into anything is power + home + volume down.
i have obtained the official samsung firmware ROM for my phone.
is my way ahead to "just" flash it using Odin, and i will have my good times back ?
Maybe try to clear Data and Cache partitions first?
mat9v said:
Maybe try to clear Data and Cache partitions first?
Click to expand...
Click to collapse
Just to clear you're stuck at the start screen( the screen it shows Note 2 and model number)?
If so, then i have no clue
If your phone goes in a bootloop ( startscreen then samsung logo animation, blank screen, start screen, samsung logo animation...) I have faced this issue while flashing Stock ROMs and you can clear this by doing a factory reset though i have no clue whether this is the correct one for MIUI ROM.
prabukannappan said:
Just to clear you're stuck at the start screen( the screen it shows Note 2 and model number)?
If so, then i have no clue
If your phone goes in a bootloop ( startscreen then samsung logo animation, blank screen, start screen, samsung logo animation...) I have faced this issue while flashing Stock ROMs and you can clear this by doing a factory reset though i have no clue whether this is the correct one for MIUI ROM.
Click to expand...
Click to collapse
i was stuck at the very first startscreen that just stayed there. i had been messing around with some DPi and a lot of tweaks.
i used Odin from my PC to flash the official firmware, then i used Philz recovery to format and clean before flashing my MiUi V5 ROM.
ALL works great.
I screwed up.
I wanted to install a new custom mod after purchasing a new SM-P605. I rooted my device, and searched for a while on how to install a custom recovery (TWRP). I downloaded ODIN and flashed it a couple of times but it didn't work, I kept getting a "recovery is not seandroid enforcing" and the screen freezes.
Then I tried Rashr's flash tool to install TWRP for me, and afterwards selected "boot into recovery".
Now i'm stuck in the same screen, but whenever I tried to restart, i get back to it, and can't get back in the system.
What can I do?
I'm unfortunately stuck in a very similar situation.
I was updating the firmware on my tablet to 4.4.2 downloaded off Sammy mobile, uploading using Odin. I've done this dozens of times since my S2 which was 12 handsets and 6 Android tablets ago. This time, about a third of the way through the process hung for a few minutes then the device restarted without warning and now its stuck in a loop where it starts normally
http://imgur.com/MTwiE5V [1]
Then says
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery.
Then this
http://imgur.com/Ua1nmhi [2]
and stays on that screen for short periods before rebooting and starting the above again.
Thanks in advance for any tips or help you guys can provide!
SleepyDonald said:
I screwed up.
I wanted to install a new custom mod after purchasing a new SM-P605. I rooted my device, and searched for a while on how to install a custom recovery (TWRP). I downloaded ODIN and flashed it a couple of times but it didn't work, I kept getting a "recovery is not seandroid enforcing" and the screen freezes.
Then I tried Rashr's flash tool to install TWRP for me, and afterwards selected "boot into recovery".
Now i'm stuck in the same screen, but whenever I tried to restart, i get back to it, and can't get back in the system.
What can I do?
Click to expand...
Click to collapse
Have tried factory reset/clear cache/clear dalvik?
shayind4 said:
Have tried factory reset/clear cache/clear dalvik?
Click to expand...
Click to collapse
Thanks, but it turns out the solution to my problem was simple. I took it to the place I got it from and the guy just pressed power, vol and menu button long enough until it rebooted. I'm quite a noob it seems.
I'm not sure if it will help you Nationalmaverick, because my problem was slightly different.
Hi Wonder if anyone can help?
I downloaded mirror beta from the app store to mirror my Galaxy Tab 3 SM-T210 to my apple TV3g.
Once downloaded i was informed that the device had to be rooted, so I used Kingoroot and followed the instructions. Everything was fine during the rooting process and completed informing me that it was successful.
The problem is after this the Tab is stuck in a constant cycle mode of the Samsang GALAXYTAB 3 boot logo.
I have managed to power it off ( Black screen) but have been unsuccessful in getting the device into recovery mode to try an hard reset.
I have tried all the button combinations I could find on Google but it only just shows the galaxy screen. Any help would be much appreciated since it is my daughters tablet and ill be in a valley of it if I cant get it restored.
Thanks in advance
Have you tried to Boot your Tab into Download mode?
If this working , flash Stockrom with Odin.
I'm in a similar situation with the logo boot loop except I am unable to shut it down. I hold the power button for 10 seconds and it reboots right back to the logo again with no shut down. How can I shut this down?
Strizay said:
I'm in a similar situation with the logo boot loop except I am unable to shut it down. I hold the power button for 10 seconds and it reboots right back to the logo again with no shut down. How can I shut this down?
Click to expand...
Click to collapse
I got in the same situation trying to root my Tab. I wound up holding the power button down a really long time and then gently releasing; then I booted it into recovery and there is an "unbricking your 10.1 " post on XDA that has a stock 4.2.2 link.
Once you get the thing into recovery, and it took several attempts (like for two days)- I had given up and was thinking I had finally truly bricked an android) I got it into recovery and then used Odin to flash the original stock rom and it worked. Then Samsung almost immediately downloaded the OTA and I was at 4.4.2 stock.
The sd card slot is broken, so I am still trying to get the tab rooted, but for now just having it functioning in stock form is better than that Galaxy emblem slowly flashing every 5 seconds until the battery dies (Itried that too, thinking it may somehow recharge and reboot and something would be different-no such luck)
But I found holding the button down persistently made the difference, at least it seemed to.
Good luck
Just got my HTC One M9 (Canadian on Bell today).
I go home to start getting all my apps and data back on and the phone reboots itself, half way through the reboot, it reboots all over again. This just keeps going on creating a massive bootloop.
I can get into flashboot mode. But none of the options in there seem to help.
I've tried flashing the RUU but am S-ON so that was no good.
I've tried everything I can think of and got nowhere.
Any help is greatly appreacited
Have you tried going into recovery and doing a factory reset?
Sent from my HTC One M9 using Tapatalk
The phone won't even boot into recovery. Just keeps boot looping when selecting that too.
AaronDC19 said:
The phone won't even boot into recovery. Just keeps boot looping when selecting that too.
Click to expand...
Click to collapse
if you have a costume recovery hold Volume UP and DOWN and POWER button at the same time, it should take you to the boot loader there boot to recovery
No custom recovery.
Phone is completely stock.
*deleted*
AaronDC19 said:
No custom recovery.
Phone is completely stock.
Click to expand...
Click to collapse
maybe the power button is stuck or something any updates?
Thought about that idea.
Brought it back to bell and traded it for another. No issues yet...