hi, am running cwm 10.1, but baseband is still on MC8, is it possible with odin to only update the modem/baseband to say MG2? and if so, where would i find this separate file?
tnx
ttdom said:
hi, am running cwm 10.1, but baseband is still on MC8, is it possible with odin to only update the modem/baseband to say MG2? and if so, where would i find this separate file?
tnx
Click to expand...
Click to collapse
To flash single files you can use Heimdall. Set it up, extract your PIT, go to the Flash tab, use the PIT you have extracted and then add only the partitions you need, with their files. Flash and enjoy.
Regarding the baseband update, I can't tell if it will work, nor what files you may have to use.
Related
Hi,
I own a galaxy note 2 lte version. I have a situation where i have to open, delete modem.bin and repack the stock tar.md5 file.
So here is the situation,
I recently flashed a MF2 stock rom from a different region (Portugal) onto my phone. If you guys are aware, the MF2 modem changes the efs partition and hence if I have to go back to an old stock rom the imei will not be recognized. So I have to re flash the mf2 modem to get the imei working else with old modem imei will not be correct.
What I plan to do,
Flash an old stock firmware without modem so that the current modem is retained and I have a valid imei.
I would like to ask you guys if you think it would work and in that case can I, using 7zip, extract the tar.md5 file and delete the modem.bin file and repack it to tar.md5 again to be flashed via odin PDA?
Thanks in advance for the heads up.
ysrini said:
Hi,
I own a galaxy note 2 lte version. I have a situation where i have to open, delete modem.bin and repack the stock tar.md5 file.
So here is the situation,
I recently flashed a MF2 stock rom from a different region (Portugal) onto my phone. If you guys are aware, the MF2 modem changes the efs partition and hence if I have to go back to an old stock rom the imei will not be recognized. So I have to re flash the mf2 modem to get the imei working else with old modem imei will not be correct.
What I plan to do,
Flash an old stock firmware without modem so that the current modem is retained and I have a valid imei.
I would like to ask you guys if you think it would work and in that case can I, using 7zip, extract the tar.md5 file and delete the modem.bin file and repack it to tar.md5 again to be flashed via odin PDA?
Thanks in advance for the heads up.
Click to expand...
Click to collapse
I don;t quite understand why would you delete modem, don't you need to flash previous modem version? Isn't it then easier to just flash old modem?
dalanik said:
I don;t quite understand why would you delete modem, don't you need to flash previous modem version? Isn't it then easier to just flash old modem?
Click to expand...
Click to collapse
I plan to delete the modem from TAR just because in that case the old modem would be retained.
If you are not much familiar with linux, it will be more difficult for you to unpack, repack and adding tar + md5
Here solution which can be followed by newbie too
-Flash old ROM, (you will lose baseband and IMEI, don't worry)
-Extract new ROM (e.g. mf2) and find modem.bin
-Flash modem.bin with PC odin for 'phone' tab (unstead of PDA we are using for flashing ROM)
-Now you will have baseban and IMEI back
Done.
dr.ketan said:
If you are not much familiar with linux, it will be more difficult for you to unpack, repack and adding tar + md5
Here solution which can be followed by newbie too
-Flash old ROM, (you will lose baseband and IMEI, don't worry)
-Extract new ROM (e.g. mf2) and find modem.bin
-Flash modem.bin with PC odin for 'phone' tab (unstead of PDA we are using for flashing ROM)
-Now you will have baseban and IMEI back
Done.
Click to expand...
Click to collapse
Thanks a lot for your timely help and concern.
I downloaded the Singapore Starhub MC1 firmware from the sammobile website and flashed it using Odin.
Luckily after flashing and setting up the phone -> the Modem was able to read mt EFS and my IMEI is intact.
Everything is okay. Happy :victory:
Finally, one more question,
If the MF2 Kernel makes changes in the EFS partition, in my case now -> how do you guys think the old MB3's modem was able to read the EFS partition and IMEI without any EFS backup / modem change.
Wht you getting by dialing *#1234#
Sent from my GT-N7100 using xda premium
dr.ketan said:
wht you getting by dialing *#1234#
sent from my gt-n7100 using xda premium
Click to expand...
Click to collapse
ap: N7105xxdmb3
cp: N7105dxdll1
csc: N7105olbdmc1
May be this scenario limited to N7100
Or mf2 you have flashed still doesn't have kernel that causing efs modification.
Sent from my GT-N7100 using xda premium
dr.ketan said:
May be this scenario limited to N7100
Or mf2 you have flashed still doesn't have kernel that causing efs modification.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yes, I too hope the same.
Hi guys! I have the italian firmware for the i9195, i9195XXUBML4. I have alredy tripped my knox, so i don't care about the warranty...
If i flash the GT-I9195XXUCNH5_R1 deodexed from @ladislav.heller, will i face problem with modem or something else? I already have some experience with my ex s advance and with my current tablet ( tab2) wich are both with cyano, so i can understand something
I cannot try it because if i flash something i want to be sure that it is compatible with my phone, i wouldn't brick it
Sorry for the bad english xD
@Alecotro Before flashing that ROM you must upgrade your modem to cnh5. Links for that modem are on the ROM's thread.
When u download that modem file extract it and flash it with ODIN as PDA / AP. Repeat and verify if your modem changed. Check baseband in settings>about phone for confirmation. Once u are done upgrading the modem u can flash the ROM via custom recovery.
Without modem u will face connectivity issues and force closes. I am using that ROM and it is perfect.
sasank360 said:
@Alecotro Before flashing that ROM you must upgrade your modem to cnh5. Links for that modem are on the ROM's thread.
When u download that modem file extract it and flash it with ODIN as PDA / AP. Repeat and verify if your modem changed. Check baseband in settings>about phone for confirmation. Once u are done upgrading the modem u can flash the ROM via custom recovery.
Without modem u will face connectivity issues and force closes. I am using that ROM and it is perfect.
Click to expand...
Click to collapse
Thank you very much! Will the different modem have problem italian carrier like wind (don't know if you know it)? Cause with my s advance i always had the same baseband whatever the rom i flashed...
And, in the future, if I flash something like cyano, will i have to switch back to my old modem?
Alecotro said:
And, in the future, if I flash something like cyano, will i have to switch back to my old modem?
Click to expand...
Click to collapse
No CM is independent from your modem.
Alecotro said:
Thank you very much! Will the different modem have problem italian carrier like wind (don't know if you know it)? Cause with my s advance i always had the same baseband whatever the rom i flashed...
Click to expand...
Click to collapse
Up!
If I flash a firmware different from the ITV one, will it be different with signal of Italian carriers?
I've researched all day on this, flashed stock rom and recovery again, and nothing. Phone is out of warranty obviously.
My IMEI is showing null/null and the baseband is unknown. I've flashed stock, rooted, tried restoring the efs folder, and nothing has worked. Phone worked just fine yesterday/this morning. Any suggestions?
In my efs folder, there is no NV_DATA.BIN file either.
Any help? TIA.
1) download just the modem from this thread http://forum.xda-developers.com/show....php?t=2252932
2) connect phone to pc
3) copy zip over (do not un zip)
4) reboot to recovery
5) install zip
try this it worked for me
What bootloader is on your phone? Flashing the a modem onto your phone that is not compatible with your bootloader can brick your phone. For example, flashing a 4.4.2 modem onto a 4.3 bootloader will hard brick your phone.
http://forum.xda-developers.com/galaxy-s3-att/general/modem-4-4-2-modems-i747-i747m-t2856577
imevilbob said:
1) download just the modem from this thread http://forum.xda-developers.com/show....php?t=2252932
2) connect phone to pc
3) copy zip over (do not un zip)
4) reboot to recovery
5) install zip
try this it worked for me
Click to expand...
Click to collapse
That link is broken, but yup, I already tried that.
audit13 said:
What bootloader is on your phone? Flashing the a modem onto your phone that is not compatible with your bootloader can brick your phone. For example, flashing a 4.4.2 modem onto a 4.3 bootloader will hard brick your phone.
http://forum.xda-developers.com/galaxy-s3-att/general/modem-4-4-2-modems-i747-i747m-t2856577
Click to expand...
Click to collapse
I'm on the 4.3 bootloader and 4.3 Stock ROM.
Do you have a mjb modem on your phone?
Yes, I do.
If the baseband is unknown, how do you know you have the mjb modem on your phone?
Maybe you need to re-flash the 4.3 mjb modem. If that doesn't resolve the issue, you could try injecting the imei using nvwriter.
http://forum.xda-developers.com/showthread.php?t=1804117
audit13 said:
If the baseband is unknown, how do you know you have the mjb modem on your phone?
Well, that's what I flashed. Maybe I flashed incorrectly, I'll flash again.
Maybe you need to re-flash the 4.3 mjb modem. If that doesn't resolve the issue, you could try injecting the imei using nvwriter.
10-4.
http://forum.xda-developers.com/showthread.php?t=1804117
Click to expand...
Click to collapse
Bold.
Good luck. Report back with your results.
Thanks.
Reflashing didn't work.
Trying the instructions, I'm getting stuck at step 2. When I dial that code, I get this screen:
and when trying to select the other option, the button highlights blue, and then goes back to how it was before.
What are you using to flash the modem? Which file are you flashing? Are you sure you are on a completely stock ROM with a stock dialler?
audit13 said:
What are you using to flash the modem? Which file are you flashing? Are you sure you are on a completely stock ROM with a stock dialler?
Click to expand...
Click to collapse
The latest CWM.
File name is: modem_CWM_I747UCUEMJB
Yes, completely stock ROM. Just flashed through Odin.
I747 said:
The latest CWM.
File name is: modem_CWM_I747UCUEMJB
Yes, completely stock ROM. Just flashed through Odin.
Click to expand...
Click to collapse
You flashed the 4.3 stock ROM via Odin? Where did you get the file? It must have been a custom compilation because AT&T never released 4.3 as a full ROM, only as an OTA.
audit13 said:
You flashed the 4.3 stock ROM via Odin? Where did you get the file? It must have been a custom compilation because AT&T never released 4.3 as a full ROM, only as an OTA.
Click to expand...
Click to collapse
I believe I downloaded the .tar from here, let me see if I can find the link.
I got the .tar here
http://forum.xda-developers.com/showpost.php?p=53563728&postcount=322
I assume that tar.md5 file has the necessary modem but I don't know for sure since I used to have the i747m, not the i747.
Maybe this will help with flashing just the modem: http://forum.xda-developers.com/showthread.php?t=2540998
Hey there I747! I can help you solve your problem I believe! If you want I can walk you thru the steps to fix this issue! Let me know if your interested! Just PM me a message and we can do it over Hangouts or something! Will probably take about an hour.
audit13 said:
I assume that tar.md5 file has the necessary modem but I don't know for sure since I used to have the i747m, not the i747.
Maybe this will help with flashing just the modem: http://forum.xda-developers.com/showthread.php?t=2540998
Click to expand...
Click to collapse
Flashed it from that thread, still a no go.
I747 said:
Flashed it from that thread, still a no go.
Click to expand...
Click to collapse
I have what you need. ..and a slight change to your flashing procedure should solve your issues. I am assuming you're on at&t right? Let me know and will post how to fix it. Please post your model number and carrier
KaosMaster said:
I have what you need. ..and a slight change to your flashing procedure should solve your issues. I am assuming you're on at&t right? Let me know and will post how to fix it. Please post your model number and carrier
Click to expand...
Click to collapse
Yup, on AT&T. SGH-I747.
Hi everyone,
I know this problem is well known and solved many times already, but I'm not being able to solve it by myself. This is why I'm posting this thread as a last resort to try and get some help, just in case i missed something..
My phone is currently with unknown baseband and IMEI on stock 4.4.2 flashed via kies recovery. If I try to flash any 4.4.4 port ROM the phone locks up seconds after boot, it will only work with stock rom. I already tried a few modems i found on another threads but no success.
Can anyone help?
Thanks.
madz78 said:
Hi everyone,
I know this problem is well known and solved many times already, but I'm not being able to solve it by myself. This is why I'm posting this thread as a last resort to try and get some help, just in case i missed something..
My phone is currently with unknown baseband and IMEI on stock 4.4.2 flashed via kies recovery. If I try to flash any 4.4.4 port ROM the phone locks up seconds after boot, it will only work with stock rom. I already tried a few modems i found on another threads but no success.
Can anyone help?
Thanks.
Click to expand...
Click to collapse
restore efs backup
there is a thread about imei and patched DN4.
Update everything, modem, bootloader, get these from newest firmware downloaded from sammobile and post results
yaro666 said:
restore efs backup
there is a thread about imei and patched DN4.
Update everything, modem, bootloader, get these from newest firmware downloaded from sammobile and post results
Click to expand...
Click to collapse
Hi,
I already got latest firmware from kies temp directory but I have no idea where to get modem and bootloader.. Can you point me in right direction?
Firmware file from kies is N7100XXUFNI5_N7100ORGFNJ1_N7100XXUFNG1_HOME.tar
Thanks.
madz78 said:
Hi,
I already got latest firmware from kies temp directory but I have no idea where to get modem and bootloader.. Can you point me in right direction?
Firmware file from kies is N7100XXUFNI5_N7100ORGFNJ1_N7100XXUFNG1_HOME.tar
Thanks.
Click to expand...
Click to collapse
from sammobile, download newest firmware for your region and unpack it from stock rom and then pack it with 7zip to tar file and flash it with Odin.
you need sboot and modem
Double post
yaro666 said:
from sammobile, download newest firmware for your region and unpack it from stock rom and then pack it with 7zip to tar file and flash it with Odin.
you need sboot and modem
Click to expand...
Click to collapse
Isn't that a bit pointless? Maybe I'm missing the point, but if I already have flashed latest firmwares from both sammobile and kies, it kind of makes the point that modem and bootloader files from sammobile don't solve the problem, right?
Thanks.
Sent from my SM-G925F using Tapatalk
madz78 said:
Isn't that a bit pointless? Maybe I'm missing the point, but if I already have flashed latest firmwares from both sammobile and kies, it kind of makes the point that modem and bootloader files from sammobile don't solve the problem, right?
Thanks.
Click to expand...
Click to collapse
Well truly doesnt seem pointless
I got my baseband resolved (Previously showed 'Unknown') by flashing pure stock rom (got from SamMobile) THROUGH ODIN so might be there is a point.
Try stock rom flashing from odin as according to me stock rom has everything in it radio(Baseband),boot(efs), system, etc etc
The unknown baseband and imei can be due to a modem and bootloader mismatch.
To confirm the bootloader and modem on the phone, install the Samsung Phone Info app from the play store to confirm the version.
Hello, I was wondering if exist somewhere a collection of images to flash modem partition. Searching through the forum or sammobile I've found only full stock rom...
Edit: in my case I'm interested in (P605) LTE version...
Not sure if there is a collection of ready to flash images, but you could always extract the modem.bin from the full stock firmware, create an Odin .tar, and flash.
blindmanpb said:
Not sure if there is a collection of ready to flash images, but you could always extract the modem.bin from the full stock firmware, create an Odin .tar, and flash.
Click to expand...
Click to collapse
how can his be done
please can you send me this file. tht is 5.1.1 bootloader and modem for samsung galaxy note P605. after installing lineage os , it des not read the sim card.