Issue updating CWM for 4.4 install - T-Mobile, Samsung Galaxy SIII

Been a while since i updated my device so i wanted to try out the new 4.4. I see that i needed CWM 6.0.4.3 and i only have 6.0.3.0. I downloaded Rom manager and installed the update that way and Rom manager says its is running the 6.0.4.3 but when i go to the recovery it says the old version is still running and gives me the expected error when i try to flash the 4.4 ROM. I also tried to download the the update file and flash that in recovery and it didn't work either.
Any help would be greatly appreciated. It probably something simple and i will feel like an idiot when someone chimes in........

guttus said:
Been a while since i updated my device so i wanted to try out the new 4.4. I see that i needed CWM 6.0.4.3 and i only have 6.0.3.0. I downloaded Rom manager and installed the update that way and Rom manager says its is running the 6.0.4.3 but when i go to the recovery it says the old version is still running and gives me the expected error when i try to flash the 4.4 ROM. I also tried to download the the update file and flash that in recovery and it didn't work either.
Any help would be greatly appreciated. It probably something simple and i will feel like an idiot when someone chimes in........
Click to expand...
Click to collapse
I updated mine yesterday from the rom mananger and had no problems.
1 thing you should know before you go and try the 4.4 kitkat is that sd card isnt showing. I love the rom but cant get to anything on my sd card.
Good luck.

@guttus
Just a Rule of Thumb. It is advisable to flash Recoveries with ODIN. I am very well aware you can use Rom Manager or Goo Manager, but this is just a thumb rule for flashing the Recovery Partition.
Also note, flashing wrong Recovery can cause hard brick.

recoveries in my sig.
odin and recovery flashable versions
Sent from my T-Mobile MyTouch 3G Slide(HTC Espresso) using Tapatalk 2

Hi all. I'm on the i9305 and want to flash latest recovery for kitkat. I'm on philz recovery and wondered if there was one of his I could use. I searched xda but I couldn't find anything. Also I couldn't find an Odin (tar) file for normal cwm. Omni and cm only have the zip and IMG files.

Perseus71 said:
@guttus
Just a Rule of Thumb. It is advisable to flash Recoveries with ODIN. I am very well aware you can use Rom Manager or Goo Manager, but this is just a thumb rule for flashing the Recovery Partition.
Also note, flashing wrong Recovery can cause hard brick.
Click to expand...
Click to collapse
I did do this update via oden. Also flashed Phil's recovery from there. This is where i tried to flash the 4.4 gapps to fix the issue with no luck.

Please post a log of the error when you tried to flash CM Kitkat. If you can't pull the log file, take a photo.

Related

Issue Flashing Roms

So for some reason, I catch an error everytime I try to flash a rom to my phone. Then I am forced to restore my backup.
I have it rooted with CWM v5.5.0.4.
i747.
Not sure what other information you guys would need to assist. Would I need to re-root it? Different version of CWM?
Are you wiping data before you flash any new roms? That could be it..
Yep, always wipe data/factory.
.... i'm pretty sure that telling us what the error message says would help, too....
I'll take a wag and say since your recovery is 5.5.0.4 your probably getting a status 7 error which simply means you need to update your recovery to the newest version. Check in the dev section for the cwm recovery thread.
jethro650 said:
I'll take a wag and say since your recovery is 5.5.0.4 your probably getting a status 7 error which simply means you need to update your recovery to the newest version. Check in the dev section for the cwm recovery thread.
Click to expand...
Click to collapse
Agreed, almost undoubtedly...in every recovery flashable .zip there is an update-binary file which is the actual executable that is commanded by the update-script on what operations to perform. The newer versions of this binary are incompatible with older versions of the recoveries. This effect is not necessarily one way either, an older recovery trying to flash a new .zip or vice versa can produce this error but as a general rule using the newest recoveries should minimize this problem. The only time the reverse is a problem is when there is an update to the recovery api and there hasn't been an updated update-script built into a .zip. The easiest way to check is download the appropriate rom manager for your recovery, Clockwork Rom Manger for CWM or Goomanager for TWRP.

S3 stuck at cwm

PLEASE HELP ...... I TRIED TO DOWNLOAD KITKAT 4.4 ON MY PHONE AND NOW MY S3 ONE GOES TO CWM AND BOOT MODE I NEED HELP PRONTO AND IT WONT GO INTO USB MODE HELP PLS:crying::crying::crying::crying:
smith77342 said:
PLEASE HELP ...... I TRIED TO DOWNLOAD KITKAT 4.4 ON MY PHONE AND NOW MY S3 ONE GOES TO CWM AND BOOT MODE I NEED HELP PRONTO AND IT WONT GO INTO USB MODE HELP PLS:crying::crying::crying::crying:
Click to expand...
Click to collapse
wait, it does or doesnt go to download mode? if it does....odin back to stock. make sure you use the 4.3 tar if you have a knox enabled bootloader.
if it doesnt go into download, mount usb storage from recovery and put a stock touchwiz rom on your phone and flash that?
I found that when I downloaded TWRP for recovery and tried to install 4.4, I was unable to do so(install error). I flashed a 4.3 and worked. That might not answer your question but that's what happened to me.
can u tell me
chrishh44 said:
I found that when I downloaded TWRP for recovery and tried to install 4.4, I was unable to do so(install error). I flashed a 4.3 and worked. That might not answer your question but that's what happened to me.
Click to expand...
Click to collapse
how did u flash ur rom and how did u get twrp installed because i cant even acesse my phone:crying:
I put a micro-SD card in my computer using the adapter and placed the rom on it. Put it back in your phone, find the file in recovery, then flash.
chrishh44 said:
I found that when I downloaded TWRP for recovery and tried to install 4.4, I was unable to do so(install error). I flashed a 4.3 and worked. That might not answer your question but that's what happened to me.
Click to expand...
Click to collapse
Your TWRP issue is likely a compatibility issue. If you are using version 2.6.3.0, that version is not capable of flashing KitKat 4.4.x ROM's due to changes in the code from 4.3.x to 4.4.x. Version 2.6.3.1 is supposed to be compatible for KitKat, but a lot of users, myself included, could not get it to work properly, nothing would mount in recovery, and the touch response was horrendous. I personally highly recommend Philz Touch recovery, it is based on CWM, but is light-years beyond regular CWM, and is virtually flawless in my opinion.

Can someone give me the link to go from 4.3.1 to 4.4??

I'm running Dirty Unicorn 4.3.1 and MK4 and want to root to 4.4 kit kat and load some new roms.
I have tried just wiping and flashing, but I get no data unless i'm on wifi.
Is there a step by step to get the update?? I also read about some knox crap also. Don't know what that is.
Please advise.......
Thanks in advance
Dave
wascapsfan said:
I'm running Dirty Unicorn 4.3.1 and MK4 and want to root to 4.4 kit kat and load some new roms.
I have tried just wiping and flashing, but I get no data unless i'm on wifi.
Is there a step by step to get the update?? I also read about some knox crap also. Don't know what that is.
Please advise.......
Thanks in advance
Dave
Click to expand...
Click to collapse
Well if you read most of the 4.4 rom threads you will see you need to use cwm recovery or philz recovery. Since you are using twrp you wont get data to work without going through a few hoops.
jlmancuso said:
Well if you read most of the 4.4 rom threads you will see you need to use cwm recovery or philz recovery. Since you are using twrp you wont get data to work without going through a few hoops.
Click to expand...
Click to collapse
I did download rom manager and Philz. I just wasn't sure how to get them to override TWRP. Do I just flash Philz??
Thanks so much for chiming in. I've been rooted for several years, but this update flew right by me.
Keep talking......
Yeah just flash it through ROM manager then reboot into recovery. If it is not philz recovery (although it should be) then you can just flash it in recovery.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Yeah just flash it through ROM manager then reboot into recovery. If it is not philz recovery (although it should be) then you can just flash it in recovery.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I downloaded rom manager, but it doesn't seem to override TWRP. I also tried to flash Philz (which I preferred), but I could only try to flash it with TWRP, and of course, it failed.
Do I need to freeze TWRP in Titanium backup ???
Please re-download Philz and verify md5 then flash in twrp. After flashing in twrp reboot the recovery within twrp and boom! you have Philz!
flynhawn2002 said:
Please re-download Philz and verify md5 then flash in twrp. After flashing in twrp reboot the recovery within twrp and boom! you have Philz!
Click to expand...
Click to collapse
Each time I download Philz, I try to flash it, (through TWRP),but it fails.
wascapsfan said:
Each time I download Philz, I try to flash it, (through TWRP),but it fails.
Click to expand...
Click to collapse
Like you, I could not get TWRP to leave my device (no matter what I tried). Only thing that finally worked was this flasher utility to get CWM:
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Granted I didn't try to Odin PhilZ or CWM but that was about the only thing left I hadn't tried.
I had twrp for a recovery. When I installed DU 4.4.2, I downloaded cwm 6.0.4.3 because I guess twrp and 4.4 roms don't play nice. I actually downloaded the cwm recovery, saved it on my external sd, and booted into twrp recovery, flashed the recovery file for cwm, and it rebooted. I boot back into recovery with cwm on board, and then downloaded whatever 4.4 roms and gapps package that was necessary. It works fine for me.

CivZ-FLEXNOTE-8.0_Rev1.3 crash to recovery

so, i flashed the kitkat bootloader from odin, then flashed the zip from philz touch recovery. the kernel splash screen stayed on for a long time, then the screen went out, and it loaded to the kernel splash, then to recovery. then i realized i hadnt wiped, so i flashed the kitkat stock rom through odin, installed philz touch recovery, did a full wipe, then installed the zip, and the same thing happened. being a new member with less than 10 posts i cant post on the official thread, so... whats the deal? what could the problem be?
EDIT: my bad everyone. i found a misleading link to philz, the newest version in that thread was not the newest version.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n5110/philz_touch_6.41.6-n5110.tar.md5 use this. if you have the same problem
tooandrew said:
so, i flashed the kitkat bootloader from odin, then flashed the zip from philz touch recovery. the kernel splash screen stayed on for a long time, then the screen went out, and it loaded to the kernel splash, then to recovery. then i realized i hadnt wiped, so i flashed the kitkat stock rom through odin, installed philz touch recovery, did a full wipe, then installed the zip, and the same thing happened. being a new member with less than 10 posts i cant post on the official thread, so... whats the deal? what could the problem be?
Click to expand...
Click to collapse
in aroma choose the stock kernel option. I had the same bootloop problem ....it kept going into recovery.
After choosing the stock kernel everything was smooth.
off course pls confirm that you are using the correct ROM version
for 5100 version is 1.2
1.3 is only for 5110
I didn't see any kernel options let me make a nandroid and run it again. and yeah I have the 5110. Thanks
hey, i reinstalled it, there were no kernel options, but i left the bootanimation option on stock samsung, and i had been using the XAR region, so i tried btu this time, because thats what the stock rom i have installed is. still crashes to recovery
EDIT: and after restoring my nandroid, i get to the rom splash screen, and it just loops there.
I have the same problem...Where is the Stock KK that u can flash thru Odin ???
ronny71 said:
I have the same problem...Where is the Stock KK that u can flash thru Odin ???
Click to expand...
Click to collapse
Here is the link to Stock KK:
http://www.sammobile.com/firmwares/3/?download=29611
Also download Odin v3.09 from the same link.
Then follow these instructions:
1) Unzip the Download zip file, you will get N5110XXDNE1_N5110OXADNE1_HOME.tar.md5
2) Put the tablet in Download mode
3) Install N5110XXDNE1_N5110OXADNE1_HOME.tar.md5 using "PA" option of ODIN.
4) It will take a while, let it finish.
5) If that works, reboot back to download mode
6) Install latest Philz recovery, using ODIN's PA option.
7) Reboot into recovery, and install any custom ROMS.
Note: This will trip your KNOX counter
pvsgh said:
Here is the link to Stock KK:
http://www.sammobile.com/firmwares/3/?download=29611
Also download Odin v3.09 from the same link.
Then follow these instructions:
1) Unzip the Download zip file, you will get N5110XXDNE1_N5110OXADNE1_HOME.tar.md5
2) Put the tablet in Download mode
3) Install N5110XXDNE1_N5110OXADNE1_HOME.tar.md5 using "PA" option of ODIN.
4) It will take a while, let it finish.
5) If that works, reboot back to download mode
6) Install latest Philz recovery, using ODIN's PA option.
7) Reboot into recovery, and install any custom ROMS.
Note: This will trip your KNOX counter
Click to expand...
Click to collapse
thats the thing.... i flashed it, i have stock rooted kitkat running fine, i have philz recovery running fine, but when i try to flash the custom kitkat rom, i wipe, flash the zip, the aroma installer boots i choose a few options, the aroma installer completes, then i reboot and it just crashes to recovery, no matter how many times i try, how many factory resets i do, anything. knox is tripped, but i can't run the rom. i had the 4.2.2 custom touchwiz from the same developer running fine, but then i decided i had to have kitkat, and.... nothing. it simply won't run.
if it matters, i am already running the same stock rom you linked to, 4.4.2 btu
EDIT: just for the record, i am not new to this in general, only this particular device - my sprint galaxy s3 is running carbon rom, my galaxy gear is running null rom, i flashed N3BULA on my dad's verizon galaxy note two, and ive already decided on a rom for the note 3 i am getting at the end of july.
this is just my first time encountering this problem, all assistance with this matter is greatly appreciated.
tooandrew said:
thats the thing.... i flashed it, i have stock rooted kitkat running fine, i have philz recovery running fine, but when i try to flash the custom kitkat rom, i wipe, flash the zip, the aroma installer boots i choose a few options, the aroma installer completes, then i reboot and it just crashes to recovery, no matter how many times i try, how many factory resets i do, anything. knox is tripped, but i can't run the rom. i had the 4.2.2 custom touchwiz from the same developer running fine, but then i decided i had to have kitkat, and.... nothing. it simply won't run.
if it matters, i am already running the same stock rom you linked to, 4.4.2 btu
EDIT: just for the record, i am not new to this in general, only this particular device - my sprint galaxy s3 is running carbon rom, my galaxy gear is running null rom, i flashed N3BULA on my dad's verizon galaxy note two, and ive already decided on a rom for the note 3 i am getting at the end of july.
this is just my first time encountering this problem, all assistance with this matter is greatly appreciated.
Click to expand...
Click to collapse
Ok, so first try to validate the MD5 of the file that you are installing.
if you are installing "CivZ-FlexNote8.0_KK-Rev1.3-N5110_signed.zip" then the MD5 should match as below:
b8abeb1ec9535ef526d02ef402788359
Validate the MD5 in PC as well as Tablet. Sometime you get a good download on PC, but when you copy it to Phone/tablet file might not get copied properly.
Second option you can try to install another 4.4.2 based ROM:
http://forum.xda-developers.com/showthread.php?t=2763274
Again validate the MD5 before installing.
pvsgh said:
Ok, so first try to validate the MD5 of the file that you are installing.
if you are installing "CivZ-FlexNote8.0_KK-Rev1.3-N5110_signed.zip" then the MD5 should match as below:
b8abeb1ec9535ef526d02ef402788359
Validate the MD5 in PC as well as Tablet. Sometime you get a good download on PC, but when you copy it to Phone/tablet file might not get copied properly.
Second option you can try to install another 4.4.2 based ROM:
http://forum.xda-developers.com/showthread.php?t=2763274
Again validate the MD5 before installing.
Click to expand...
Click to collapse
Md5 matches. I'm going to download am earlier update and dirty flash, see if that helps
Hey, those who were having problems, you probably got the wrong recovery. i had two versions of philz on my computer, and i flashed philz 5 instead of philz 6.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n5110/philz_touch_6.41.6-n5110.tar.md5
the other guy who was boot looping, that is the link to the recovery you should use. everything will be fine with that one
tooandrew said:
Hey, those who were having problems, you probably got the wrong recovery. i had two versions of philz on my computer, and i flashed philz 5 instead of philz 6.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n5110/philz_touch_6.41.6-n5110.tar.md5
the other guy who was boot looping, that is the link to the recovery you should use. everything will be fine with that one
Click to expand...
Click to collapse
Thanx my man...u hit it right on the head...Wrong Recovery...I hope everyone who has this problem reads ur post...Thanx again Buddy...:good::good:

[Q] Anyone else have trouble flashing a ROM

I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
shaunjohn said:
I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
Click to expand...
Click to collapse
What are you trying to flash?
And which recovery VERSION are you using?
Model aand name of rom
Which model do you have?? and what is the rom's name?
210r
ive tried
philz recpvery
cwm
twrp 2/7 and 2/8
ive tried
cm11
rocket
swat(name may be wrong)
kids
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
A friendly reminder - please keep all question threads in the Q&A board. Android dev is only for posting releases, not questions.
Thanks!
Same Result
ruzell said:
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
Click to expand...
Click to collapse
same result, error opening zip file
Did you ever figure this out? I"m having the same issue.
Can't flash a ROM on Tab 3 7.0 t210r
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
starmaha said:
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Click to expand...
Click to collapse
bierma32 said:
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
Click to expand...
Click to collapse
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
starmaha said:
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
Click to expand...
Click to collapse
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
bierma32 said:
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
Click to expand...
Click to collapse
To clarify, when I initially rooted, I used Odin to flash recovery and root.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
At first we are turn us i The circle,but now we can come to your prob.
Flash a Rom and make a picture and post that here. So we can See The error message and your Recovery.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
Sounds like the rom download is bad. Check the md5 of the rom before trying to install.
Kind of success. I downloaded the same version of PhilZ, for Odin, on my laptop.
I put the tablet in download mode and flashed the recovery with Odin.
I downloaded the ROM again (http://forum.xda-developers.com/gal...m-stockrom-kitkat-version-16-08-2014-t2849742). This is one I had tried before. This time to my laptop and copied it to the tablet. The other times, I had downloaded the ROM directly onto the tablet.
While it was in the process of flashing, there were some video anomolies.
I rebooted the tablet into recovery and flashed the ROM. It hung on SAMSUNG for a very long time after the flash and reboot. I powered it off and rebooted. It booted completely this time, but not without some issues. The first thing was when the message pops up that Android is optimizing apps. That bar was all screwy looking, snowy. (see attached image)
Once I got to the lock screen and entered the pin, the screen "fractured", pieces shifted around, and the tablet locked up. I wish I had taken a picture of it. Never seen anything like it.
I had not done a data wipe yet. I did a data wipe, rebooted, entered the pin, tablet locked up again.
I then was going to restore the backup I made before the flashing. It wouldn't restore because of an MD5 mismatch. I had restored this backup previously with no problem.
I restored an older backup and then spent a couple of hours getting everything back to the level of the now broken backup.
Flash nolekat and all went fine.
I've had problems as well. I normally flash via a recovery. At times I'll have an md5 mismatch or it just doesn't work; I've even backed up a working ROM only to find out I can't restore the same backup. Seems like a hit or miss with me
I tried flashing NoleKat and it failed on me too.
[/COLOR]
bierma32 said:
At one of your post you write after flashing you must put in the Pin?
So you have make not a clean install or factory reset, you done a wipe cache and wipe dalvik.
You must do a clean install if you come from different Roms or Version.
Click to expand...
Click to collapse
Please post a picture from your Recovery with the error message.

Categories

Resources