Related
my phone is rhod400, sprint version CDMA
cdma connect command is:
err = at_send_command("AT+CFUN=1", NULL);
err = at_send_command("AT+HTC_DUN=0", NULL);
err = at_send_command("ATH", NULL);
err = at_send_command("ATDT#777", &p_response);
and disconect command is ? I need this command to disconnect data, then try kill pppd process.
Click to expand...
Click to collapse
turn off data connection cause phone reboot(maybe I found the reason)
When i turn off data connect, phone auto reboot, this happend not everytime,but many times, i have try some builds but all of these builds have this problem.
Builds i had tried: FRG83.R5 ,FRG83.R6,odexed-cm61test-22112010, cm6-28112010-v12,tiad8 FROYO
I guess souce code maybe do null point operation somewhere.
Click to expand...
Click to collapse
muziling said:
my phone is rhod400, sprint version CDMA
When i turn off data connect, phone auto reboot, this happend not everytime,but many times, i have try some builds but all of these builds have this problem.
Builds i had tried: FRG83.R5 ,FRG83.R6,odexed-cm61test-22112010, cm6-28112010-v12,tiad8 FROYO
I guess souce code maybe do null point operation somewhere.
Click to expand...
Click to collapse
When you say turn off data what are you using? The built-in disable synchronization, the built-in disable all cellular, or a 3rd party app that disables data?
muziling said:
my phone is rhod400, sprint version CDMA
When i turn off data connect, phone auto reboot, this happend not everytime,but many times, i have try some builds but all of these builds have this problem.
Builds i had tried: FRG83.R5 ,FRG83.R6,odexed-cm61test-22112010, cm6-28112010-v12,tiad8 FROYO
I guess souce code maybe do null point operation somewhere.
Click to expand...
Click to collapse
I don't see you trying vanilla FRX03. You've tried it with a bunch of custom systems tho...
Try it with FRX03 - that should be everybody's baseline.
I have try FRX03 yet,but I can't do any operation after boot into android, because the system is no response. I have try to install FRX03 several times , everytime I encoutered the same problem, I will try today again.
BTW : where can I download vanilla FRX03, i had google it ,but not found this build for RHOD400
OK, i try version http://htcandroid.xland.cz/XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE.zip with kernel http://zimages.googlecode.com/files/htc-msm-linux-20101204_010857-package.tar.bz2
I follow the step:
1. full format SD card FAT32, not quick format
2. the first boot, welcome screen show, no touch screen, just wait for about 8 minutes,top LED not light,sceen can not be wake up by any key
3. remove battery and boot again.
4. boot into android, screen stop at lock screen, screen always light, can not goto sleep, and I can'n do anything, I touch the screen,but system is no response for me.
I threw together a build on 11/20. Download here. The only thing that could be considered outdated on it would be the kernel (zImage/modules).
If you're on a RHOD400 and using it as a CDMA device, make sure force_cdma=1 in the startup.txt. Enjoy.
Thanks , I will try this tonight.
http://www.multiupload.com/XD023XA5AH
is same to that I had tried
http://htcandroid.xland.cz/XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE.zip
cause reboot logcat:
I/logwrapper( 1277): /system/bin/sh terminated by exit(0)
D/GsmUmtsOptions( 1407): preferenceTreeClick: return false
D/NetworkSettings( 1407): onPreferenceTreeClick: preference == mButtonDataEnable
d.
D/dalvikvm( 1407): GC_CONCURRENT freed 498K, 52% free 2980K/6151K, external 2002
K/2137K, paused 0ms+10ms
I/TelephonyRegistry( 1318): notifyDataConnection: state=0 isDataConnectivityPoss
ible=false reason=apnSwitched interfaceName=null networkType=3
I/TelephonyRegistry( 1318): notifyDataConnection: state=1 isDataConnectivityPoss
ible=true reason=apnSwitched interfaceName=null networkType=3
D/dalvikvm( 1414): GC_EXPLICIT freed 186K, 52% free 2834K/5831K, external 2128K/
2137K, paused 110ms
D/SntpClient( 1318): request time failed: java.net.UnknownHostException: north-a
merica.pool.ntp.org
D/SntpClient( 1318): request time failed: java.net.UnknownHostException: north-a
merica.pool.ntp.org
D/SntpClient( 1318): request time failed: java.net.UnknownHostException: north-a
merica.pool.ntp.org
D/pppd ( 1621): using channel 1
I/pppd ( 1621): Using interface ppp0
I/pppd ( 1621): Connect: ppp0 <--> /dev/smd1
W/pppd ( 1621): Warning - secret file /etc/ppp/pap-secrets has world and/or g
roup access
D/pppd ( 1621): sent P
D/Tethering( 1318): ppp0 is not a tetherable iface, ignoring
D/pppd ( 1621): rcvd P
D/pppd ( 1621): rcvd P
D/pppd ( 1621): sent P
D/pppd ( 1621): rcvd P
W/pppd ( 1621): Warning - secret file /etc/ppp/chap-secrets has world and/or
group access
D/pppd ( 1621): sent P
D/pppd ( 1621): rcvd P
I/pppd ( 1621): CHAP authentication succeeded
D/pppd ( 1621): sent P
D/pppd ( 1621): sent P
D/pppd ( 1621): rcvd P
D/pppd ( 1621): sent P
D/pppd ( 1621): rcvd P
D/pppd ( 1621): rcvd P
D/pppd ( 1621): sent P
D/pppd ( 1621): rcvd P
D/pppd ( 1621): sent P
D/pppd ( 1621): rcvd P
I/pppd ( 1621): local IP address I
I/pppd ( 1621): remote IP address I
I/pppd ( 1621): primary DNS address I
I/pppd ( 1621): secondary DNS address I
D/pppd ( 1622): Script /etc/ppp/ip-up started (pid 1623)
D/pppd ( 1622): Script /etc/ppp/ip-up finished (pid 1623), status = 0x2
I/TelephonyRegistry( 1318): notifyDataConnection: state=2 isDataConnectivityPoss
ible=true reason=apnSwitched interfaceName=ppp0 networkType=3
W/ActivityManager( 1318): Unable to launch app com.android.providers.downloads/1
0017 for broadcast Intent { act=android.net.conn.CONNECTIVITY_CHANGE flg=0x10000
000 (has extras) }: process is bad
W/ActivityManager( 1318): finishReceiver called but none active
D/Tethering( 1318): MasterInitialState.processMessage what=3
D/GsmUmtsOptions( 1407): preferenceTreeClick: return false
D/NetworkSettings( 1407): onPreferenceTreeClick: preference == mButtonDataEnable
d.
I/pppd ( 1622): Terminating on signal 15
I/pppd ( 1622): Connect time 0.5 minutes.
I/pppd ( 1622): Sent 40 bytes, received 40 bytes.
D/pppd ( 1622): Script /etc/ppp/ip-down started (pid 1654)
D/pppd ( 1622): sent P
D/pppd ( 1622): Script /etc/ppp/ip-down finished (pid 1654), status = 0x0
D/pppd ( 1622): rcvd P
C:\Users\lilsh>
I think i found the problem,file /lib/froyo/libhtcgeneric-ril.so
function requestDeactivateDataCall(),there is one line system("killall pppd");
I am sure kill pppd process will cause phone reboot, when I execute command "adb shell killall pppd", phone reboot.
my carrier is CDMA(china telecom)
Edit: my SIM is damaged
Hi,
since yesterday I have the problem that I have no working gsm radio anymore.
It happened after some (about 5) adb reboot
I'm on ARHD18 but after that also testet CM10 with same problem. HBOOT 1.39. Both installed on release and working since weeks.
What happens is that I boot the HOX, insert PIN, radio is there for a second, than it is gone, in settings airplane mode switches by itself (manual switching doesn't change anything).
Code:
DEVICEINFO
build.board: unknown
build.bootloader: 1.39.0000
build.brand: htc_europe
build.cpu_abi: armeabi-v7a
build.cpu_abi2: armeabi
build.device: endeavoru
build.display: JRO03C
build.fingerprint: htc_europe/endeavoru/endeavoru:4.1.1/JRO03C/128187.31:user/release-keys
build.hardware: endeavoru
build.host: abm030
build.id: JRO03C
build.manufacturer: HTC
build.model: EndeavorU
build.product: endeavoru
build.radio: unknown
build.serial: HT24AW101299
build.tags: release-keys
build.time: 1355673983000
build.type: user
build.user: root
version.codename: REL
version.incremental: 128187.31
version.release: 4.1.1
version.sdk_int: 16
Code:
LOGCAT
01-20 15:15:32.024 E/MODEM (10448): Poweron_modem_fls.sh version: 1.0.2
01-20 15:15:32.144 E/MODEM (10451): ttyACMX0 is null. Creat it.
01-20 15:15:32.154 E/MODEM (10455): /rca folder mounted.
01-20 15:15:32.159 E/MODEM (10457): cp calib.nvm to work folder
01-20 15:15:32.164 E/MODEM (10458): setprop ril.nvm.cal.dir /data/modem_work/
01-20 15:15:32.169 E/MODEM (10460): setprop ril.nvm.work.dir /data/modem_work/
01-20 15:15:32.184 E/MODEM (10464): Gen. sec.bin SUCC in /rfs/
01-20 15:15:32.254 E/MODEM (10473): Double confirm sec.bin is in /rfs/ and SUCC.
01-20 15:15:32.259 E/MODEM (10474): NVM Injecting file: new InjectionTool will generate empty nvm file if it doesn't exist
01-20 15:15:32.479 I/MODEM (10485): Delete sec.bin in /rfs/
01-20 15:15:32.774 I/MODEM (10491): Checking malog_status
01-20 15:15:32.774 I/MODEM (10492): insmod /system/lib/modules/cdc-acm.ko 1
01-20 15:15:32.789 E/MODEM (10494): IMCdownload -V0x1130 -X0 -x800 -y30 -z50
01-20 15:15:34.379 E/MODEM (10527): try to find /dev/ttyACM0...
01-20 15:15:35.394 E/MODEM (10532): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:15:36.409 E/MODEM (10540): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:15:37.449 E/MODEM (10546): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:15:38.474 E/MODEM (10555): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:15:38.484 E/MODEM (10561): ttyACM0 found!!
01-20 15:15:38.489 E/MODEM (10562): /dev/ttyACM0 found, start gsm0710mux
01-20 15:15:38.499 I/MODEM (10565): Checking malog_status for raw_ip_net
01-20 15:15:38.504 E/MODEM (10566): insmod /system/lib/modules/raw_ip_net.ko 3
01-20 15:15:54.069 E/MODEM (11048): Poweron_modem_fls.sh version: 1.0.2
01-20 15:15:54.084 E/MODEM (11051): ttyACMX0 is null. Creat it.
01-20 15:15:54.099 E/MODEM (11055): /rca folder mounted.
01-20 15:15:54.109 E/MODEM (11057): cp calib.nvm to work folder
01-20 15:15:54.114 E/MODEM (11058): setprop ril.nvm.cal.dir /data/modem_work/
01-20 15:15:54.124 E/MODEM (11060): setprop ril.nvm.work.dir /data/modem_work/
01-20 15:15:54.144 E/MODEM (11068): Gen. sec.bin SUCC in /rfs/
01-20 15:15:54.244 E/MODEM (11072): Double confirm sec.bin is in /rfs/ and SUCC.
01-20 15:15:54.249 E/MODEM (11073): NVM Injecting file: new InjectionTool will generate empty nvm file if it doesn't exist
01-20 15:15:54.569 I/MODEM (11090): Delete sec.bin in /rfs/
01-20 15:15:54.889 I/MODEM (11096): Checking malog_status
01-20 15:15:54.894 I/MODEM (11097): insmod /system/lib/modules/cdc-acm.ko 1
01-20 15:15:54.909 E/MODEM (11100): IMCdownload -V0x1130 -X0 -x800 -y30 -z50
01-20 15:15:56.519 E/MODEM (11128): try to find /dev/ttyACM0...
01-20 15:15:57.549 E/MODEM (11135): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:15:58.579 E/MODEM (11146): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:15:59.589 E/MODEM (11149): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:00.614 E/MODEM (11152): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:01.639 E/MODEM (11157): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:02.679 E/MODEM (11165): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:03.694 E/MODEM (11177): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:04.709 E/MODEM (11190): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:05.729 E/MODEM (11195): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:06.819 E/MODEM (11205): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:07.919 E/MODEM (11208): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:08.949 E/MODEM (11211): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:10.024 E/MODEM (11214): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:11.124 E/MODEM (11217): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:12.234 E/MODEM (11220): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:13.264 E/MODEM (11223): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:14.309 E/MODEM (11226): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:15.404 E/MODEM (11229): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:16.489 E/MODEM (11232): Waiting for /dev/ttyACM0, before start gsmmux
01-20 15:16:17.539 E/MODEM (11239): Waiting for /dev/ttyACM0, before start gsmmux
I appreciate any help, thanks.
AW: [Q] no radio, Modem Error
For sure I did wipe, reinstall Rom and boot.img, reinstall HBOOT
Sent from my EndeavorU using xda premium
Re: [Q] no radio, Modem Error
Try reflashing radio, perhaps? Check shipped radio collection.
Sent from my One X
TToivanen said:
Try reflashing radio, perhaps? Check shipped radio collection.
Sent from my One X
Click to expand...
Click to collapse
I tried with GetRIL, installed 5.1204.162.29 again. But no difference
Re: [Q] no radio, Modem Error
If it still says build.radio:unknown, something's not right. It could be that installing a radio via flashable zip does the trick.
Sent from my One X
TToivanen said:
If it still says build.radio:unknown, something's not right. It could be that installing a radio via flashable zip does the trick.
Sent from my One X
Click to expand...
Click to collapse
The problem is that in shipped radio collection is none for actual radio (JB).
And...isn't it included ROM? So it should have been there after wipe and reinstall of two different roms and kernel?
The deviceinfo is of CatLog. Perhaps it can't read it. Any other way to get the info?
In settings --> info I get baseband 5.1204.162.29
[SOLVED] SIM damage
OK. Today I could test another sim in my phone and my sim in another HOX.
And...tada...my SIM seems to be damaged.
hello guys this is my first fix. I hope it fixes the bluetooth bug on liquidsmooth 2.37 for galaxy ace 2 (http://forum.xda-developers.com/showthread.php?t=2573302)
As @judas1977 said it was from kernel and gives some help and idea how to change it, I tried to make a fix for it. just download and flash it from recovery It worked for my device and I hope it will work for you too =)
here is the link
https://drive.google.com/file/d/0B-8__H0BBJIJRkxYVmZxTXlSM00/edit?usp=sharing
thanks for
@judas1977
@Rox
@shine911
and everyone who helped to developed this awesome rom
development
If i find enough time i will try to update rom with new updates or some fixes
blastos01 said:
If i find enough time i will try to update rom with new updates or some fixes
Click to expand...
Click to collapse
While you're at it, you wouldn't happen to know the bluetooth fix for the GT-S7560?
fix
BT was the biggest for me. I changed the kernel with the latest cm10.2 kernel. So the patch has to change all kernel related issues.
idk
SamsungGalaxySamsung said:
While you're at it, you wouldn't happen to know the bluetooth fix for the GT-S7560?
Click to expand...
Click to collapse
As i dont have your device i dont know what is the problem with BT un your device. i think i need too much time for it.
Sorry for my bad english.
Thanks no problem
Sent from my GT-S7560 using XDA Premium 4 mobile app
wi-fi ?
I guess wi-fi feature has been improved. can any body confirm?
I think my device catches wi-fi signal more effectively after flashing patch
blastos01 said:
As i dont have your device i dont know what is the problem with BT un your device. i think i need too much time for it.
Sorry for my bad english.
Click to expand...
Click to collapse
Here is the logcat for BT on boot:
Code:
E/bt-btif ( 1433): btif_enable_service: current services:0x2000000
E/bt-btif ( 1433): btif_enable_service: current services:0x2000040
E/bt-btif ( 1433): btif_enable_service: current services:0x2040040
E/bt-btif ( 1433): warning : no command pending, ignore ack
E/bt-btif ( 1433): btif_enable_service: current services:0x2140040
E/bt_vendor_qcom( 1433): open(/sys/class/rfkill/rfkill1/type) failed: No such file or directory (2)
E/bt_vendor_qcom( 1433): open() failed: No such file or directory (2)
E/bt_vendor_qcom( 1433): open() failed: No such file or directory (2)
E/bt_h4 ( 1433): [h4] Unknown HCI message type drop this byte 0x0
E/BluetoothAdapterState( 1433): Error enabling Bluetooth
E/BluetoothManagerService( 896): recoverBluetoothServiceFromError
E/BluetoothServiceJni( 1433): Callback env check fail: env: 0x11ca8, callback: 0x62b00
E/BluetoothServiceJni( 1433): Callback: 'adapter_state_change_callback' is not called on the correct thread
Anas Karbila said:
Here is the logcat for BT on boot:
Code:
E/bt-btif ( 1433): btif_enable_service: current services:0x2000000
E/bt-btif ( 1433): btif_enable_service: current services:0x2000040
E/bt-btif ( 1433): btif_enable_service: current services:0x2040040
E/bt-btif ( 1433): warning : no command pending, ignore ack
E/bt-btif ( 1433): btif_enable_service: current services:0x2140040
E/bt_vendor_qcom( 1433): open(/sys/class/rfkill/rfkill1/type) failed: No such file or directory (2)
E/bt_vendor_qcom( 1433): open() failed: No such file or directory (2)
E/bt_vendor_qcom( 1433): open() failed: No such file or directory (2)
E/bt_h4 ( 1433): [h4] Unknown HCI message type drop this byte 0x0
E/BluetoothAdapterState( 1433): Error enabling Bluetooth
E/BluetoothManagerService( 896): recoverBluetoothServiceFromError
E/BluetoothServiceJni( 1433): Callback env check fail: env: 0x11ca8, callback: 0x62b00
E/BluetoothServiceJni( 1433): Callback: 'adapter_state_change_callback' is not called on the correct thread
Click to expand...
Click to collapse
I have exams and too much work with my master thesis. for now I can't tell you when will I try to change the problem or... sorry for these =(
blastos01 said:
I have exams and too much work with my master thesis. for now I can't tell you when will I try to change the problem or... sorry for these =(
Click to expand...
Click to collapse
Alright thanks for reply.
I am having a problem/issue with Root permission in CM-12.1 ROM. Developer option is set to ADB/Application, when i do
$ adb shell
$ su
It works fine on terminal. But when I goto Root-Permission required application, Root permission doesn't work at all. Got a log:
D/su ( 5898): su invoked.
D/su ( 5898): starting daemon client 10028 10028
D/su ( 5901): remote pid: 5898
D/su ( 5901): remote pts_slave:
D/su ( 5901): waiting for child exit
E/su ( 5902): dup2 child outfd failed with 9: Bad file number
D/su ( 5901): sending code
D/su ( 5901): child exited
D/su ( 5898): client exited 255
I/System ( 4556): Failed to destroy process 5897
I/System ( 4556): android.system.ErrnoException: kill failed: ESRCH (No such process)
I/System ( 4556): at libcore.io.Posix.kill(Native Method)
I/System ( 4556): at libcore.io.ForwardingOs.kill(ForwardingOs.java:101)
I/System ( 4556): at java.lang.ProcessManager$ProcessImpl.destroy(ProcessManager.java:260)
I/System ( 4556): at com.c.a.b.e.<init>(Shell.java:211)
I/System ( 4556): at com.c.a.b.e.a(Shell.java:848)
I/System ( 4556): at com.c.a.b.e.a(Shell.java:834)
I/System ( 4556): at com.c.a.b.e.h(Shell.java:826)
I/System ( 4556): at com.c.a.a.a(RootShell.java:372)
I/System ( 4556): at com.bigeyes0x0.trickstermod.service.ServiceInitializer.onHandleIntent(ServiceInitializer.java:258)
I/System ( 4556): at android.app.IntentService$ServiceHandler.handleMessage(IntentService.java:65)
I/System ( 4556): at android.os.Handler.dispatchMessage(Handler.java:102)
I/System ( 4556): at android.os.Looper.loop(Looper.java:135)
I/System ( 4556): at android.os.HandlerThread.run(HandlerThread.java:61)
Any ideas?
I rooted my SGH-T999, running Android 4.3, flashing TWRP recovery w/ Odin.
The rooting was successful.
Now, on to the part where I ran into trouble.
Problem: I can't successfully install any ROMs for Android M or later.
NOTE: I need Android M or later to have more control over individual apps' permissions.
I tried to flash Pac-ROM through TWRP, like so:
(from TWRP home menu)
1. Wipe>Swipe to Factory Reset
2. Go Back to Home Menu
3. Install>Select pac_d2tmo_MM.Beta.Official_20160920-165602.zip>Swipe to confirm Flash
Note: The first time I tried to flash Pac-ROM, I wasn't aware of GApps. So, I didn't flash it.
4. Reboot
The phone booted to the "Welcome/Language Selection" screen, but I couldn't select a language.
It seems that the UI elements belonging to the "Welcome" screen fail to respond to touch, while other UI elements respond normally (as demonstrated at the end of the video at the URL below).
All attempts to re-flash, since, have included the additional step off adding the GApps zip (for ARM, Android 6.0) to the "ZIP Queue".
However, all attempts end the same way.
I've documented the process in the video @ the following URL: youtu.be/EZTwaURkRSs
Another strange behavior (that isn't apparent in the video) is that, immediately after being shown on the display, the "Welcome" screen looks fine for a few hundred milliseconds or so before the screen is drawn with a yellowish-hue. As if blue-light filtering kicks in (even when the system clock is mid-day).
I also tried to flash a different ROM (Oct-OS OCT-M-R3) on a few of the attempts, but again I observed the same exact behavior ("Welcome" screen's yellowish hue and lack of response to touch).
It doesn't seem to be a hardware issue, because touch does work, just not on the "Welcome" screen.
I'm fairly certain I've selected the correct ROM for the model.
So, what did I mess up?
I am facing similar issue.. i was on carbon rom 7.1.2 and then i thought of downgrading to octos M for xposed and cm theme engine and same thing happened as you faced with both roms (pac and oct os r3) .. i restored my backup of carbon rom 7.1.2 and my screen went black (sod) and i had to flash stock (4.4.2) os to get my phone working again
andynoob said:
I am facing similar issue.. i was on carbon rom 7.1.2 and then i thought of downgrading to octos M for xposed and cm theme engine and same thing happened as you faced with both roms (pac and oct os r3) .. i restored my backup of carbon rom 7.1.2 and my screen went black (sod) and i had to flash stock (4.4.2) os to get my phone working again
Click to expand...
Click to collapse
Do you mean that you were able to flash a ROM successfully, after flashing stock (4.4.2)?
Or, you were ONLY able to flash stock (4.4.2) successfully?
Thank you for the reply,
Gerald
I just restored my twrp backup of stock os .. Had urgent work so couldn't try to flash those ROMs again.. will try them next week
UPDATE:
So, I successfully restored my stock backup.
With the stock setup I experienced no problems.
Since my original post, I've alternated between restoring stock backup and flashing ROMs.
I tried flashing Oct-OS and Pac-ROM, again and again.
I also tried to install LineageOS, as well.
I am able to install CyanogenMod 12.1, but this doesn't meet my requirement of android version 6 or later.
Installation of any of the custom ROMs has resulted in the same behavior demonstrated in the video (youtu.be/EZTwaURkRSs):
- after boot, device fails to respond to touch input
- however, device does accept touch input on some UI objects. so, I don't think it's a screen/hardware issue
How can I debug further?
I'd like to try to capture some sort of boot log, but adb is "offline" during boot process.
And, since I can't make it past the "language selection/welcome" screen, I can't get to settings and enable USB debugging.
UPDATE:
I managed to enable ADB during boot, by using the ADB shell while the device was in recovery mode.
Code:
[email protected] ~ $ adb push ~/.android/adbkey.pub /data/misc/adb/
[email protected] ~ $ adb shell
~# cd /data/misc/adb/
/data/misc/adb# cat adbkey.pub > adb_keys
/data/misc/adb# cd /
~# mkdir /system2
~# mount -o rw /dev/block/mmcblk0p14 /system2 ## NOTE: for this command, had to figure out which partition was the system partition; here it was /dev/block/mmcblk0p14
~# echo "persist.service.adb.enable=1" >> default.prop
~# echo "persist.service.debuggable=1" >> default.prop
~# echo "persist.sys.usb.config=mtp,adb" >> default.prop
~# echo "persist.service.adb.enable=1" >> /system2/build.prop
~# echo "persist.service.debuggable=1" >> /system2/build.prop
~# echo "persist.sys.usb.config=mtp,adb" >> /system2/build.prop
~# ## now press Ctrl-D to exit the ADB shell
NOTE: thanks to @ErnestChia for the following post forum.xda-developers.com/showpost.php?p=63829295&postcount=27
So, I was able to get a logcat during the SetupWizard.
There were 3 lines, related to the SystemUI, that were repeated over and over.
Code:
W BroadcastQueue: Timeout of broadcast BroadcastRecord{51dfd23 u-1 android.intent.action.TIME_TICK} - [email protected], started 10010ms ago
W BroadcastQueue: Receiver during timeout: BroadcastFilter{a4079bf u0 ReceiverList{4b103de 730 com.android.systemui/10018/u0 remote:448f719}}
I ActivityManager: Skipping duplicate ANR: ProcessRecord{768d889 730:com.android.systemui/u0a18} Broadcast of Intent { act=android.intent.action.TIME_TICK flg=0x50000014 (has extras) }
All I've gathered is that SystemUI isn't responding.
Which seems to have started during boot, with the following output.
Code:
W ActivityManager: Timeout executing service: ServiceRecord{dd2251a u0 com.android.systemui/.ImageWallpaper}
E ActivityManager: ANR in com.android.systemui
E ActivityManager: Reason: executing service com.android.systemui/.ImageWallpaper
E ActivityManager: 4.1% 730/com.android.systemui: 2.2% user + 1.8% kernel / faults: 1246 minor 2 major
SystemUI Stack Trace
Code:
Cmd line: com.android.systemui
Build fingerprint: 'samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys'
ABI: 'arm'
Build type: optimized
Zygote loaded classes=3986 post zygote classes=991
Intern table: 46441 strong; 62 weak
JNI: CheckJNI is off; globals=427 (plus 368 weak)
Libraries: /system/lib/libandroid.so /system/lib/libcompiler_rt.so /system/lib/libjavacrypto.so /system/lib/libjnigraphics.so /system/lib/libmedia_jni.so /system/lib/libsoundpool.so /system/lib/libwebviewchromium_loader.so libjavacore.so (8)
Heap: 5% free, 12MB/13MB; 84371 objects
Dumping cumulative Gc timings
Total number of allocations 84371
Total bytes allocated 12MB
Total bytes freed 0B
Free memory 813KB
Free memory until GC 813KB
Free memory until OOME 179MB
Total memory 13MB
Max memory 192MB
Zygote space size 1972KB
Total mutator paused time: 0
Total time waiting for GC to complete: 0
Total GC count: 0
Total GC time: 0
Total blocking GC count: 0
Total blocking GC time: 0
...
"main" prio=5 tid=1 Native
| group="main" sCount=1 dsCount=0 obj=0x745992a0 self=0xb77f9b30
| sysTid=730 nice=0 cgrp=default sched=0/0 handle=0xb6efab44
| state=S schedstat=( 0 0 0 ) utm=64 stm=14 core=1 HZ=100
| stack=0xbe5d0000-0xbe5d2000 stackSize=8MB
| held mutexes=
native: #00 pc 0004290c /system/lib/libc.so (__ioctl+8)
native: #01 pc 00049391 /system/lib/libc.so (ioctl+14)
native: #02 pc 0001e8c9 /system/lib/libbinder.so (android::IPCThreadState::talkWithDriver(bool)+132)
native: #03 pc 0001eefb /system/lib/libbinder.so (android::IPCThreadState::waitForResponse(android::Parcel*, int*)+38)
native: #04 pc 0001f0b1 /system/lib/libbinder.so (android::IPCThreadState::transact(int, unsigned int, android::Parcel const&, android::Parcel*, unsigned int)+124)
native: #05 pc 0001a0b3 /system/lib/libbinder.so (android::BpBinder::transact(unsigned int, android::Parcel const&, android::Parcel*, unsigned int)+30)
native: #06 pc 00089471 /system/lib/libandroid_runtime.so (???)
native: #07 pc 00db9189 /data/dalvik-cache/arm/[email protected]@boot.oat (Java_android_os_BinderProxy_transactNative__ILandroid_os_Parcel_2Landroid_os_Parcel_2I+140)
at android.os.BinderProxy.transactNative(Native method)
at android.os.BinderProxy.transact(Binder.java:503)
at android.hardware.ICameraService$Stub$Proxy.getCameraCharacteristics(ICameraService.java:421)
at java.lang.reflect.Method.invoke!(Native method)
at android.hardware.camera2.utils.Decorator.invoke(Decorator.java:80)
at java.lang.reflect.Proxy.invoke(Proxy.java:393)
at android.hardware.ICameraService.getCameraCharacteristics(ICameraService.java:-2)
at android.hardware.camera2.CameraManager.getOrCreateDeviceIdListLocked(CameraManager.java:635)
at android.hardware.camera2.CameraManager.getCameraIdList(CameraManager.java:99)
- locked <0x0da89d30> (a java.lang.Object)
at com.android.systemui.statusbar.policy.FlashlightController.getCameraId(FlashlightController.java:126)
at com.android.systemui.statusbar.policy.FlashlightController.<init>(FlashlightController.java:62)
at com.android.systemui.statusbar.phone.PhoneStatusBar.makeStatusBarView(PhoneStatusBar.java:1087)
at com.android.systemui.statusbar.phone.PhoneStatusBar.addStatusBarWindow(PhoneStatusBar.java:3285)
at com.android.systemui.statusbar.phone.PhoneStatusBar.createAndAddWindows(PhoneStatusBar.java:3281)
at com.android.systemui.statusbar.BaseStatusBar.start(BaseStatusBar.java:619)
at com.android.systemui.statusbar.phone.PhoneStatusBar.start(PhoneStatusBar.java:800)
at com.android.systemui.statusbar.SystemBars.createStatusBarFromConfig(SystemBars.java:106)
at com.android.systemui.statusbar.SystemBars.onNoService(SystemBars.java:58)
at com.android.systemui.statusbar.ServiceMonitor.startService(ServiceMonitor.java:230)
at com.android.systemui.statusbar.ServiceMonitor.-wrap5(ServiceMonitor.java:-1)
at com.android.systemui.statusbar.ServiceMonitor$1.handleMessage(ServiceMonitor.java:73)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:148)
at android.app.ActivityThread.main(ActivityThread.java:5466)
at java.lang.reflect.Method.invoke!(Native method)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:726)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:616)
i solved this issue by flashing the pac rom 6.0 from at&t . (Flash only the rom )
Do you have a copy of carbon ROM or Pac man for the d2tmo?