Develop Bugs

[Firmware] Stock "Nordic" I9250 ITL41F.XWKK9 firmware (Odin)

Not very new or exciting, but for those who for whatever reason want to go back to their Nordic yakjuxw firmware, here it is.
It requires I9250 Odin, which is also attached to this post.
Firmware download: (tar.md5 file, Unpack with 7-zip)
http://www.multiupload.com/2EUJIL7QV3
Source: modaco forum. Downloaded from Filesonic, joined, repackaged and uploaded to multiupload.
If the multiupload link doesn't work, you can always try downloading the original rar-files from the modaco forums and filesonic:
Original modaco thread.
My own neX-files mirror:
http://neXfiles.kjonigsen.net/firmware/xwkk9-odin/
If that doesn't work, I have a mirror on box.com here:
Part 1: http://www.box.com/s/g6p1h13nmo8j8l1jthcj
Part 2: http://www.box.com/s/eqyy9fqevc81omo70xe8
You only need this if the original multiupload link does not work.
I9250 Odin:
Attached to this post, but also downloadable from box.com
http://www.box.com/s/zsnje79s2y40b9b7c62s
Baseband is XXKK1.
To flash this follow the following guide:
1. Download file.
2. Unpack 7zip file. You should now have a 4-500MBish file with an extension of "tar.md5". Do NOT rename it or attempt to open.
3. Put your phone in Odin/Download-mode. To do this you have to power it off, then hold volume down and while keeping that pressed, press power. Your phone should boot into Odin/Download-mode. This should be reported on screen.
4. Connect your phone to your PC via USB.
5. Ensure your PC recognizes the phone as a valid "Gadget serial" device. If device manager is reporting new "Unknown devices" chances are Odin will not be able to connect to your Galaxy Nexus. If this happens, check chainfire's thread for more help on getting Odin and drivers working:
http://forum.xda-developers.com/showthread.php?t=1394051
6. Disconnect your phone from the PC.
7. Start Odin as Administrator (not sure this is needed, but oh well)
8. Reconnect your phone to the PC. Observe that Odin recognizes the phone.
9. Choose the unpacked firmware file in the PDA section.
10. Choose the supplied PIT-file and make sure repartition is checked.
11. Click start.
12. Wait. Watch your phone reboot into stock.
Edit 2:
Added clarifications about which files are needed.

Stweet, always nice to have.

How does one use this with odin (never had a samsung device so Odin is pretty new to me).
I tried to flash it but it just reads the MD5 sum, and then quits.

josteink said:
Not very new or exciting, but for those who for whatever reason want to go back to their Nordic yakjuxw firmware, here it is.
It requires I9250 Odin, which is also attached to this post.
Firmware download:
http://www.multiupload.com/2EUJIL7QV3
Original rars from modaco if MU for whatever reason "is down".
Part 1: http://www.box.com/s/g6p1h13nmo8j8l1jthcj
Part 2: http://www.box.com/s/eqyy9fqevc81omo70xe8
I9250 Odin:
Attached to this post, but also downloadable from box.com
http://www.box.com/s/zsnje79s2y40b9b7c62s
Baseband is XXKK1.
Edit:
Source modaco forum. Downloaded from Filesonic, joined, repackaged and uploaded to multiupload.
http://android.modaco.com/topic/349407-odin-firmware-i9250xwkk9-itl41f-newest-build/
Click to expand...
Click to collapse
Thanks, but your multiupload link leads to modaco forum and a part1 and part2 ? how am I supposed to flash them?
Edit: Sorry. Ima make myself some coffee
Edit 2: I think it would be wise to post a turorial. Users will keep asking you how to.

offenberg said:
Thanks, but your multiupload link leads to modaco forum and a part1 and part2 ? how am I supposed to flash them?
Edit: Sorry. Ima make myself some coffee
Edit 2: I think it would be wise to post a turorial. Users will keep asking you how to.
Click to expand...
Click to collapse
Sorry. Only multiupload version and Odin should be required. File downloaded from multiupload should be unpacked with 7zip.

josteink said:
Sorry. Only multiupload version and Odin should be required. File downloaded from multiupload should be unpacked with 7zip.
Click to expand...
Click to collapse
Thanks friend. I will try flash this in a bit. I guess this will wipe everything?
---------- Post added at 10:10 AM ---------- Previous post was at 10:07 AM ----------
Infra said:
How does one use this with odin (never had a samsung device so Odin is pretty new to me).
I tried to flash it but it just reads the MD5 sum, and then quits.
Click to expand...
Click to collapse
Boot into download mode. Power off - vol down + power, should do it. Remember you need the samsung drivers for odin to recognize your GN.

Infra said:
How does one use this with odin (never had a samsung device so Odin is pretty new to me).
I tried to flash it but it just reads the MD5 sum, and then quits.
Click to expand...
Click to collapse
Did you unpack the 7zip file? The file you use in Odin should have the extension "tar.md5".

josteink said:
Did you unpack the 7zip file? The file you use in Odin should have the extension "tar.md5".
Click to expand...
Click to collapse
Yes unpacked it and got that file.
Should Odin somehow recognize the phone?
And I put that file on the PDA box?

offenberg said:
Thanks friend. I will try flash this in a bit. I guess this will wipe everything?
Click to expand...
Click to collapse
I honestly haven't tried this particular build myself, but everytime I've flashed a build via Odin (for my SGS1) it has wiped my setup.
If you use the provided PIT-file and check "repartition" you will 100% guaranteed wipe everything on your phone.
Sometimes this is overkill. Sometimes that's what you want (get to a known factory state, with no unknown weirdo artifacts from previous flashings).

Infra said:
Yes unpacked it and got that file.
Should Odin somehow recognize the phone?
And I put that file on the PDA box?
Click to expand...
Click to collapse
If you have the correct drivers for your galaxy nexus, Odin should recognize the phone when it is in Odin/Download mode. (Power off. Hold volume-down. Press power-on).
If you are unsure about drivers, check chainfire's thread which has more details, more discussion and links to kown good drivers.
http://forum.xda-developers.com/showthread.php?t=1394051
And yes. This should go in the PDA section in Odin.
Edit: Added a guide to the first post.

josteink said:
I honestly haven't tried this particular build myself, but everytime I've flashed a build via Odin (for my SGS1) it has wiped my setup.
If you use the provided PIT-file and check "repartition" you will 100% guaranteed wipe everything on your phone.
Sometimes this is overkill. Sometimes that's what you want (get to a known factory state, with no unknown weirdo artifacts from previous flashings).
Click to expand...
Click to collapse
Ok. so you didnt test it. Ill try and see what happens.
Edit: it works just fine. I am now back to square one.

hi
what is deferent between yakjuxw an yakju ???

footballpics.info said:
hi
what is deferent between yakjuxw an yakju ???
Click to expand...
Click to collapse
yakjuxw= samsung yakju = Google
xw is just the nordic version
yakju is worldwide

footballpics.info said:
hi
what is deferent between yakjuxw an yakju ???
Click to expand...
Click to collapse
In general yakjuxw has a manufacutorer code of "Samsung" instead of "Google". This caused some people to get upset. See threads here on XDA in this very forum. That said, I honestly don't think anyone found any difference between the firmwares apart from that.
The yakjuxw.xwkk9 build was the "stock" firmware release in the Nordic countries in northern Europe. It supposedly has some regional customizations while waiting for full international support in ICS mainline. I've yet to discover what those customizations were though.
If you wonder what this firmware offers you if you want to run it right now, it probably offers nothing.
I've just posted this so that people who for whatever reason (warranty returns, receiving future "nordic" OTA updates should there be any etc) wants to return to "stock" for their particular region of the world, as opposed to the international/"US" stock version, will have that option.

offenberg said:
Ok. so you didnt test it. Ill try and see what happens.
Edit: it works just fine. I am now back to square one.
Click to expand...
Click to collapse
Thanks for being a guiniepig
Did you have to use the PIT file or did it work fine without it?

so this firmware yakjuxw was only released in the european noth?
i am in austria and i had this firmware too
changed to yakju yesterday (4.0.1 want to test if i get the 4.0.2 from google now but not yet)
so Austria is in the middle auf europe not in the north
i wounder if i have a gray import or if they sell this here too ..
just saw:
you write: ITL41F.XWKK9
i had: ITL41F.XXKK1

footballpics.info said:
so this firmware yakjuxw was only released in the european noth?
i am in austria and i had this firmware too
changed to yakju yesterday (4.0.1 want to test if i get the 4.0.2 from google now but not yet)
so Austria is in the middle auf europe not in the north
i wounder if i have a gray import or if they sell this here too ..
just saw:
you write: ITL41F.XWKK9
i had: ITL41F.XXKK1
Click to expand...
Click to collapse
I've read that various firmware revisions has been reported in around the world. There was a thread about this earlier here on XDA for those curious:
http://forum.xda-developers.com/showthread.php?t=1384458
I don't think anyone has received any 100% specific information about what differences there are and where it was released, and for whom.

josteink said:
Thanks for being a guiniepig
Did you have to use the PIT file or did it work fine without it?
Click to expand...
Click to collapse
I only tried using the PIT. Not without it. And it worked fine. My bootloader was still unlocked. And still no OTA

How long did the process take?
I finally got Odin to recognize my device, it's now on SetupConnection phase...
been sitting there for a while now.
EDIT: Nevermind, tried again it started flashing

How to get the new update 4.0.2 too my nexus i am on itl41f.i9250xwkk9
and i am not getting ota
Regards Michael

[Q] PIT file for GT-N5120

Hi all experts in this forum,
I am experiencing a NULL IMEI from my GT-N5120.
I suspect I lost the IMEI and baseband info (with a corrupted boot screen) from an act of wiping partition using TWRP 2.5.
This is the second time I got this and the first time I had Samsung replaced the hardware board. I have yet wanted to do this again.
I have backed up my EFS, with 2 different tools. Both do not able to restore IMEI for my case. Also, I am not able to get the Note8 USB detected properly (windows 7 x64) right after the corruption; the only chance I have is using ODIN (download mode) by draining the battery to 0% then power up with USB cable.
Here, I would like to find a PIT file for N5120. With this, I think of flashing with re-partition option then a restore of EFS.
Does anyone have a Odin PIT file for N5120? Appreciated!!

karshiang said:
Hi all experts in this forum,
I am experiencing a NULL IMEI from my GT-N5120.
I suspect I lost the IMEI and baseband info (with a corrupted boot screen) from an act of wiping partition using TWRP 2.5.
This is the second time I got this and the first time I had Samsung replaced the hardware board. I have yet wanted to do this again.
I have backed up my EFS, with 2 different tools. Both do not able to restore IMEI for my case. Also, I am not able to get the Note8 USB detected properly (windows 7 x64) right after the corruption; the only chance I have is using ODIN (download mode) by draining the battery to 0% then power up with USB cable.
Here, I would like to find a PIT file for N5120. With this, I think of flashing with re-partition option then a restore of EFS.
Does anyone have a Odin PIT file for N5120? Appreciated!!
Click to expand...
Click to collapse
The pit file is here:
.4shared.com/get/S8oWYcQKba/N5120.html
Please put befor www, beacause this page block urls
Please, can you send the EFS backup you have?

New link for PIT file PLEASE....?
Hi,
The link above .4shared.com/get/S8oWYcQKba/N5120.html (with www in front) is no longer "live". Can some kind soul please provide a new working link to the N5120 PIT file? [I am in the same sorry state as OP]
Thanks in Advance

PIT file anyone?
GaryTG said:
Hi,
The link above .4shared.com/get/S8oWYcQKba/N5120.html (with www in front) is no longer "live". Can some kind soul please provide a new working link to the N5120 PIT file? [I am in the same sorry state as OP]
Thanks in Advance
Click to expand...
Click to collapse
....Anyone. Please

GaryTG said:
....Anyone. Please
Click to expand...
Click to collapse
I have a Samsung N5120 with official firmware 4.1.2. How can I extract the Pit file to help you?

Alternative Solution found....
fadejare said:
I have a Samsung N5120 with official firmware 4.1.2. How can I extract the Pit file to help you?
Click to expand...
Click to collapse
Many thanks for the offer.
Last night, in desperation (or in a moment of genius?), I solved my problem another way.....by restoring multiple partitions. [There are apparently 21 partitions on the N5120!]
You have nudged me into posting the solution here in the hope that it might help someone else :
https://forum.xda-developers.com/galaxy-note-8-0/help/lost-phone-function-n5120-fixed-t3833697
I still haven't got/found the PIT file but happily I no longer need it.
Again, thanks for the offer.
Regards

Tab s 10.5 live demo unit.

Hi guys, I've just purchased a live demo unit off eBay and I'd like some guidance on flashing a normal stock rom so it becomes a standard wifi tab.
Is it just a case of booting into download mode and flashing a stock rom from sammobile ? I've read conflicting reports, one said do as above but another said I'd need a custom recovery like twrp to factory reset it.
Any help would be greatly appreciated.
Kind regards steve

I doubt a demo unit has been rooted and changed rom. You probably just need to go to backup/restore in settings and reset to factory default.
Sent from my SM-T805 using XDA Free mobile app

So a simple boot to download mode and flash a stock firmware with odin?

To restore the factory defaults you don't need to boot in download mode.
Pull down the top menu, press the gear icon and open the general tab, there you find backup/restore, look at the bottom, there's restore factory defaults.
Hope this helps.
Sent from my SM-T805 using XDA Free mobile app

Thanks for the reply. This is a live demo unit for store use only, so I thought this option would be disabled to stop people in the shop from doing this? I'll certainly try your idea when the tab arrives. Cheers.
If anyone else has any input I'd appreciate all /any advice. I've had many tabs and flashed rom etc...but never a live demo unit and my desk isn't big enough for a 10.5" paper weight

As this is a demo unit I think you'll find you need to flash stock firmware.

ashyx said:
As this is a demo unit I think you'll find you need to flash stock firmware.
Click to expand...
Click to collapse
I agree, but was thinking should I flash a stock kit kat rom 1st or can I jump straight to latest official lollipop build? Does it make any difference? Sorry for stupid questions but my experience with live demo units is zero. Any thoughts appreciated.
Sent from my SM-T320 using Tapatalk

Makes no difference.

UPDATE
Hi guys I'd thought I'd update my progress and would appreciate some suggestions on way forward .
Ok I flashed the latest btu lollipop rom via odin, all went smoothly and tab is now usable......sort of!
No finger print reader....to be expected i guess .
Lots of random apps like crazy taxi etc I can't delete .
Most weird of all is no multitasking button ( left of home button) I mean it lights up when back capacitive button used but won't work/light up when pressed.
So I think I need to install custom rom? Can I use flashify to install twrp? And then from there install custom rom? Do I need to root? If so which way is easiest?
Any help appreciated, I'm really out of practice at this stuff.
Cheers steve
Edit I need root for flashify, which way s easiest to root?
Edit 2 something isn't right as factory reset is greyed out, so I NEED root? And flash a custom recovery?
I'd forgotten the fun I used to have doing this stuff
Sent from my SM-T800 using Tapatalk

ashyx said:
Makes no difference.
Click to expand...
Click to collapse
Your thoughts on my above post would be appreciated. Thanks

If you are going to install twrp and root then got to the development thread and install my all in one package or follow the link in my sig.

ashyx said:
If you are going to install twrp and root then got to the development thread and install my all in one package or follow the link in my sig.
Click to expand...
Click to collapse
Last update. Thank you so very much ashyx. I flashed your all in one root and recovery, worked beautifully, I then booted to recovery and did a factory reset.
I now have a fully functional WiFi tab S WITH finger print scanner and working multi task button, best of all I picked this mint unit up for £135 and with your help I got there.
Cheers buddy . Steve

So the shortest way to have SM-T800 is to flash all in one package, right? Can you help me to find the correct 'how to' for that please? Sorry for the stupid question.

@ashyx : where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .This is the live demo unit.I need the files exactly for this ,which one I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
---------- Post added at 11:21 AM ---------- Previous post was at 11:09 AM ----------
where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .As This is the live demo unit.I need the files exactly for this .Which ones I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.

Vas2008 said:
@ashyx : where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .This is the live demo unit.I need the files exactly for this ,which one I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
---------- Post added at 11:21 AM ---------- Previous post was at 11:09 AM ----------
where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .As This is the live demo unit.I need the files exactly for this .Which ones I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
Click to expand...
Click to collapse
If you want to convert to a retail unit just install my latest update of twrp 3.0.0-0 in the development section.
Factory reset in twrp then reboot to download and install the stock firmware.

Vas2008 said:
@ashyx : where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .This is the live demo unit.I need the files exactly for this ,which one I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
---------- Post added at 11:21 AM ---------- Previous post was at 11:09 AM ----------
where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .As This is the live demo unit.I need the files exactly for this .Which ones I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
Click to expand...
Click to collapse
ashyx said:
If you want to convert to a retail unit just install my latest update of twrp 3.0.0-0 in the development section.
Factory reset in twrp then reboot to download and install the stock firmware.
Click to expand...
Click to collapse
Dear Ashyx,
I have to clarify that I have the live demo unit (T800X) and I want to convert it to the original tablet that anyone can find in the market.Without the Retail Mode stuff.I want to convert it to a regular one SM T800 WiFi.
Can you please tell me which software I should use in this case,which version of rom and provide me with the steps in order to safely flash it and to avoid to damage the tablet?I will be grateful !!!!
Thanks in advance !!

Vas2008 said:
Dear Ashyx,
I have to clarify that I have the live demo unit (T800X) and I want to convert it to the original tablet that anyone can find in the market.Without the Retail Mode stuff.I want to convert it to a regular one SM T800 WiFi.
Can you please tell me which software I should use in this case,which version of rom and provide me with the steps in order to safely flash it and to avoid to damage the tablet?I will be grateful !!!!
Thanks in advance !!
Click to expand...
Click to collapse
That's what I mean by a retail unit.
A normal unit for regular use for retail sale not demo.
Just download your firmware from SamMobile and follow the steps in the previous post.

Delete retail files
Hey Ash thanks for the " all in one " it works sweetly...donated too thanks for your work in this area, so I have done everything and finished but looking at storage it tells me its 8gb but I thought these tabs where 16 or 32gb.
Do you know if there is a locked partition with the retail files protected ?

B3NJY said:
Hey Ash thanks for the " all in one " it works sweetly...donated too thanks for your work in this area, so I have done everything and finished but looking at storage it tells me its 8gb but I thought these tabs where 16 or 32gb.
Do you know if there is a locked partition with the retail files protected ?
Click to expand...
Click to collapse
It should be.
Flash the PIT file along with the stock firmware this should give you back the correct partition size.
http://forum.xda-developers.com/galaxy-tab-s/general/extracted-sm-t800-pit-download-t3071209
By the way many thanks for your donation support, much appreciated.

Bad Flash
Ooops...something major went wrong after trying that, worried something has changed, it didnt do anything and gave me mount errors so tryed format/wipe data and now it says I have 11gb storage and I get fail on odin trying to install the ota so I can update to lolipop and root, so now I am stuck on rooted kitkat ...:crying:

N910AUCS2EQH1 ATT2EQH1 V6.0.1 Repair Firmware 4Files ( ATT USA )

Hi Everyone
I currently have at&t note 4 - SM N910A running on Marshmallow 6.0.1 baseband version - N910AUCS2EQH1 . I am looking for the following 5 repair files:
AP_N910AUCS2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_N910AUCS2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N910AUCS2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_N910AATT2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
TRLTE_USA_ATT.pit
I need to flash my phone with the above files. I would really appreciate if someone could share them here!!
A quick question: What options one must select in Odin when repairing firmware (not upgrading) : AutoReboot, F.reset Time, Repartitioning etc? And does one need a pit file to reflash the same firmware especially when one is have emmc read errors on reboot?
Thank you

somani09 said:
Hi Everyone
I currently have at&t note 4 - SM N910A running on Marshmallow 6.0.1 baseband version - N910AUCS2EQH1 . I am looking for the following 5 repair files:
AP_N910AUCS2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_N910AUCS2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N910AUCS2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_N910AATT2EQH1_CL8932341_QB14572119_REV00_user_low_ship_MULTI_CERT.tar.md5
TRLTE_USA_ATT.pit
I need to flash my phone with the above files. I would really appreciate if someone could share them here!!
A quick question: What options one must select in Odin when repairing firmware (not upgrading) : AutoReboot, F.reset Time, Repartitioning etc? And does one need a pit file to reflash the same firmware especially when one is have emmc read errors on reboot?
Thank you
Click to expand...
Click to collapse
I'm now looking for same, were you able to find the files? If so, can you please post them here or tell me where to find them? I have exact same phone and need to do same thing, but having no luck or success. Thanks!

gasssman said:
I'm now looking for same, were you able to find the files? If so, can you please post them here or tell me where to find them? I have exact same phone and need to do same thing, but having no luck or success. Thanks!
Click to expand...
Click to collapse
Im having the same problem too... Did any of you got the files?

Question I need help to root tcl pro 20 5g

Dear XDA forum users,
I am reaching out to ask for your help with rooting my TCL 20 Pro 5G phone. I have been trying to download a file that supposedly contains a ROM for my phone, from which I could extract the boot.img file needed for the rooting process. However, the link I have been provided with is showing a message saying "Forbidden", and I am unable to access it.
If anyone could provide me with a working link or guide me through an alternative method to obtain the boot.img file, I would greatly appreciate it.
Thank you in advance for your help.
Best regards,
https://drive.google.com/u/0/uc?id=1O4L36UaliQXwPFj2-Pj15sujafsvXXpS&export=download

I'll tell you what happened with my attempts. I downloaded the software, but it's in a .tctbin file format and I have no idea how to open it. None of the guides I found on the internet worked, so the only option left for me is to use a cable and the black box at the back of my phone where the partitions are located

the link you have shared is android 12 beta I assume, do not flash it to your phone, it works but has some issues especially fast battery drain and overheating problems. You can fallow this thread anayway
Flash TCL Firmware TPST Tool / Includes links to Official FW
(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware: FIRMWARE Ottawa 3CI1.tctbin (9.1G) - (Android 11)...
forum.xda-developers.com

anyone have an idea how to unlock the bootloader on my tcl 20 pro 5g?