Related
Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.
Try reading through Dr Kevin's threads again, just to be sure. Re-download the rom you want, from a different source and double check the MD5. Doesn't sound permanent, just a bad flash. Make sure you wipe everything again.
Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there
Dean_M said:
Thanks for the reply i re-downloaded the the same firmware again from sammobile incase somehow it became corrupted the first time with no luck same result could you point me to another sourse to download firmwares i have tried a similar firmware from another site but it on gave me the one file instead of the three which i flash with pda within odin but the problem was still there
Click to expand...
Click to collapse
There's a link it here... http://androidromupdate.com/2013/04...much-smoother-android-4-1-2-jelly-bean-build/
Might the same as the Sammobile but if the MD5 checks out, it should be fine.
Sent from my GT-N7100 using XDA Premium 4 mobile app
I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware
Dean_M said:
I have tried the firmware given and several others from different sources still no luck i have noticed that all the official roms i have downloaded came as one file which i placed in pda slot on odin and flashed but the the first 4.1.2 firmware came as 3 parts pda/modem/csc it was after i flashed that rom i notced the problem with both error messages so maybe its something todo with the modem/csc files that were flashed ? I cant find another BTU firmware with 3parts to reflash i have also tried other region firmware
Click to expand...
Click to collapse
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?
Dean_M said:
I have wiped cache and data after every flash and did a full factory reset still the same two error messages there is notting on the device its a clean install they pop up at the welcome screen where you select language ?
Click to expand...
Click to collapse
The one file has all the other files like modem,csc in it.. This kind of error usually happens if the data is not wiped out. But as you said you have already done that several times, I don't know what might be the problem..
As you said that you are having unlocked N7100, I hope you downloaded this file http://www.hotfile.com/dl/229498497/9ffa6b9/N7100XXDME6_N7100OXXDME2_BTU.zip.html
Yes thats what i thought that all files were included in the one yes that is the exact one i have on it now i also tried it from different sources just typed *#1234# into the dialler what i have is ap: N7100XXDME6 CP:N7100XXDME4 CSC:N7100XXDME2 ? I appreciate the Help
AlanDS said:
Once you flash the firmware, go to recovery mode and Wipe Data/Cacde... Make sure that you have backup of the phone contents.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
Dean_M said:
Hi all im having a problem with my factory unlocked n7100 i have downloaded the latest united kingdom 4.1.2 from the firmware section and flashed the 3 pda/csc/modem files with odin everything went fine but when the phone reboots i get two error messages (unfortunately process com.android.phone has stopped) & (unfortunately messaging has stopped) i have cleared cache and did a factory restore but the problem is still there the message app just crashes it is a fresh install no back ups and never been rooted also when i connect it to kies it says it is unable to update the version of firmware thats currently on my device i would like to use kies or OTA updates in the future any help would be much appreciated i have been searching for hours to no avail.
Click to expand...
Click to collapse
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
jdomadia said:
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
I think when you flash first time with 3 different files has something wrong,install check fus & also logs from *#1234#, if you post here can be more helpful.
Click to expand...
Click to collapse
Screenshots of both logs
Dean_M said:
Screenshots of both logs
Click to expand...
Click to collapse
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.
jdomadia said:
Product code is for Ireland,if someone using BTU from UK can check their product code matching with yours.
Click to expand...
Click to collapse
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
Usually the product code is set when you Factory reset your phone in Recovery mode.. In your case it has not changed.
I checked in the Sammobile for Ireland based roms. But all seems to be carrier branded. So BTU rom should ideally work as it contains EIR CSC
Dean_M said:
What does that mean i cant use BTU ? I searched for official roms matching (Eir) but i could only find branded carrier firmwares for ireland i thought i could use any region rom once it had multi csc ?
Click to expand...
Click to collapse
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762
jdomadia said:
U can use BTU if your mobile is INTENATIONAL, my meaning was about product code showing last 3 digit & trying to figure out problem,btw u download from below link than it must be correct.
http://www.sammobile.com/firmwares/3/?download=15762
Click to expand...
Click to collapse
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen
Dean_M said:
I remember having to change csc with an app when i was on 4.1.1 so i could update it in kies but i have tried several firmwares the last two days when i boot into recovery it seems to always load multi csc & (Eir) Yes that is first firmware i download after i flashed it i noticed the problem seems i have tried everything but with no luck still getting both errors on the welcome/select language screen
Click to expand...
Click to collapse
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck
jdomadia said:
Try one more thing,connect to kies & from tools select firmware upgrade & initialization,keep serial number handy which u will find under battery.good luck
Click to expand...
Click to collapse
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction
Dean_M said:
I have also tried that in kies got the same two errors after it completed anyway thanks for trying your help is much appreciated hopfully someone with the same experience can point me in the right direction
Click to expand...
Click to collapse
Yes Sure someone more knowledgeable can help,you can PM your problem to Dr.Ketan (Search in this forum) he is rely genius.
Look my signature for N7100 toolbox, find PIT and download it
extract to .pit
Flash that PIT for PIT tab of odin (selecting pit will auto select re partition optiuon, keep it selected)
Again repeat but this time along with ROM file (single file ROM also enough). Rom file for PDA and pit file for PIT
Flash and report back.
Hi all experts in this forum,
I am experiencing a NULL IMEI from my GT-N5120.
I suspect I lost the IMEI and baseband info (with a corrupted boot screen) from an act of wiping partition using TWRP 2.5.
This is the second time I got this and the first time I had Samsung replaced the hardware board. I have yet wanted to do this again.
I have backed up my EFS, with 2 different tools. Both do not able to restore IMEI for my case. Also, I am not able to get the Note8 USB detected properly (windows 7 x64) right after the corruption; the only chance I have is using ODIN (download mode) by draining the battery to 0% then power up with USB cable.
Here, I would like to find a PIT file for N5120. With this, I think of flashing with re-partition option then a restore of EFS.
Does anyone have a Odin PIT file for N5120? Appreciated!!
karshiang said:
Hi all experts in this forum,
I am experiencing a NULL IMEI from my GT-N5120.
I suspect I lost the IMEI and baseband info (with a corrupted boot screen) from an act of wiping partition using TWRP 2.5.
This is the second time I got this and the first time I had Samsung replaced the hardware board. I have yet wanted to do this again.
I have backed up my EFS, with 2 different tools. Both do not able to restore IMEI for my case. Also, I am not able to get the Note8 USB detected properly (windows 7 x64) right after the corruption; the only chance I have is using ODIN (download mode) by draining the battery to 0% then power up with USB cable.
Here, I would like to find a PIT file for N5120. With this, I think of flashing with re-partition option then a restore of EFS.
Does anyone have a Odin PIT file for N5120? Appreciated!!
Click to expand...
Click to collapse
The pit file is here:
.4shared.com/get/S8oWYcQKba/N5120.html
Please put befor www, beacause this page block urls
Please, can you send the EFS backup you have?
New link for PIT file PLEASE....?
Hi,
The link above .4shared.com/get/S8oWYcQKba/N5120.html (with www in front) is no longer "live". Can some kind soul please provide a new working link to the N5120 PIT file? [I am in the same sorry state as OP]
Thanks in Advance
PIT file anyone?
GaryTG said:
Hi,
The link above .4shared.com/get/S8oWYcQKba/N5120.html (with www in front) is no longer "live". Can some kind soul please provide a new working link to the N5120 PIT file? [I am in the same sorry state as OP]
Thanks in Advance
Click to expand...
Click to collapse
....Anyone. Please
GaryTG said:
....Anyone. Please
Click to expand...
Click to collapse
I have a Samsung N5120 with official firmware 4.1.2. How can I extract the Pit file to help you?
Alternative Solution found....
fadejare said:
I have a Samsung N5120 with official firmware 4.1.2. How can I extract the Pit file to help you?
Click to expand...
Click to collapse
Many thanks for the offer.
Last night, in desperation (or in a moment of genius?), I solved my problem another way.....by restoring multiple partitions. [There are apparently 21 partitions on the N5120!]
You have nudged me into posting the solution here in the hope that it might help someone else :
https://forum.xda-developers.com/galaxy-note-8-0/help/lost-phone-function-n5120-fixed-t3833697
I still haven't got/found the PIT file but happily I no longer need it.
Again, thanks for the offer.
Regards
I have a demo model Samsung SM-T320x i have flashed the right .pit file and got correct allocated storage but the final issue i have is that when the tablet starts up i get samsung live demo unit show. I believe this is part of the bootloader can anyone confirm this for me please? If so does anyone know how i can flash a new bootloader?
Thanks for everyone's help so far
Mike.Samsung.SM-T320 said:
I have a demo model Samsung SM-T320x i have flashed the right .pit file and got correct allocated storage but the final issue i have is that when the tablet starts up i get samsung live demo unit show. I believe this is part of the bootloader can anyone confirm this for me please? If so does anyone know how i can flash a new bootloader?
Thanks for everyone's help so far
Click to expand...
Click to collapse
I suppose you flashed a ROM after you repartitioned your device.
Which one?
Also can you post screenshots to see what you mean?
Sent from my SM-T320 using Tapatalk.
thdervenis said:
I suppose you flashed a ROM after you repartitioned your device.
Which one?
Also can you post screenshots to see what you mean?
Sent from my SM-T320 using Tapatalk.
Click to expand...
Click to collapse
I flashed the .pit file with official firmware from sammobile.com the flashed unofficial CM11 nightly.
I am unable to provide a screen shot of the actual device due to the live demo unit displaying at first startup. I have googled an image but of a different device to give you an idea.
Thanks again
Try the Samsung KIes emergency firmware recovery tool
Mike.Samsung.SM-T320 said:
I flashed the .pit file with official firmware from sammobile.com the flashed unofficial CM11 nightly.
I am unable to provide a screen shot of the actual device due to the live demo unit displaying at first startup. I have googled an image but of a different device to give you an idea.
Thanks again
Click to expand...
Click to collapse
I don't know about that, but I have read in the forum about Knox resetting about a procedure that a guy used to restore his soft bricked phone. He states that "I used the Samsung KIes emergency firmware recovery tool!".
If flashing the Stock ROM via Odin didn't do your thing perhaps the mentioned procedure will. The tricky part is that "... it wants you to report a few numbers under the battery". Perhaps it's the Serial Number which you can get without removing the battery.
Perhaps what applied to Knox resetting will apply to your issue too. Let me know how it goes.
http://forum.xda-developers.com/showpost.php?p=56869018&postcount=2099
http://forum.xda-developers.com/showpost.php?p=56893096&postcount=2101
http://forum.xda-developers.com/showpost.php?p=56895119&postcount=2102
Hi guys, I've just purchased a live demo unit off eBay and I'd like some guidance on flashing a normal stock rom so it becomes a standard wifi tab.
Is it just a case of booting into download mode and flashing a stock rom from sammobile ? I've read conflicting reports, one said do as above but another said I'd need a custom recovery like twrp to factory reset it.
Any help would be greatly appreciated.
Kind regards steve
I doubt a demo unit has been rooted and changed rom. You probably just need to go to backup/restore in settings and reset to factory default.
Sent from my SM-T805 using XDA Free mobile app
So a simple boot to download mode and flash a stock firmware with odin?
To restore the factory defaults you don't need to boot in download mode.
Pull down the top menu, press the gear icon and open the general tab, there you find backup/restore, look at the bottom, there's restore factory defaults.
Hope this helps.
Sent from my SM-T805 using XDA Free mobile app
Thanks for the reply. This is a live demo unit for store use only, so I thought this option would be disabled to stop people in the shop from doing this? I'll certainly try your idea when the tab arrives. Cheers.
If anyone else has any input I'd appreciate all /any advice. I've had many tabs and flashed rom etc...but never a live demo unit and my desk isn't big enough for a 10.5" paper weight
As this is a demo unit I think you'll find you need to flash stock firmware.
ashyx said:
As this is a demo unit I think you'll find you need to flash stock firmware.
Click to expand...
Click to collapse
I agree, but was thinking should I flash a stock kit kat rom 1st or can I jump straight to latest official lollipop build? Does it make any difference? Sorry for stupid questions but my experience with live demo units is zero. Any thoughts appreciated.
Sent from my SM-T320 using Tapatalk
Makes no difference.
UPDATE
Hi guys I'd thought I'd update my progress and would appreciate some suggestions on way forward .
Ok I flashed the latest btu lollipop rom via odin, all went smoothly and tab is now usable......sort of!
No finger print reader....to be expected i guess .
Lots of random apps like crazy taxi etc I can't delete .
Most weird of all is no multitasking button ( left of home button) I mean it lights up when back capacitive button used but won't work/light up when pressed.
So I think I need to install custom rom? Can I use flashify to install twrp? And then from there install custom rom? Do I need to root? If so which way is easiest?
Any help appreciated, I'm really out of practice at this stuff.
Cheers steve
Edit I need root for flashify, which way s easiest to root?
Edit 2 something isn't right as factory reset is greyed out, so I NEED root? And flash a custom recovery?
I'd forgotten the fun I used to have doing this stuff
Sent from my SM-T800 using Tapatalk
ashyx said:
Makes no difference.
Click to expand...
Click to collapse
Your thoughts on my above post would be appreciated. Thanks
If you are going to install twrp and root then got to the development thread and install my all in one package or follow the link in my sig.
ashyx said:
If you are going to install twrp and root then got to the development thread and install my all in one package or follow the link in my sig.
Click to expand...
Click to collapse
Last update. Thank you so very much ashyx. I flashed your all in one root and recovery, worked beautifully, I then booted to recovery and did a factory reset.
I now have a fully functional WiFi tab S WITH finger print scanner and working multi task button, best of all I picked this mint unit up for £135 and with your help I got there.
Cheers buddy . Steve
So the shortest way to have SM-T800 is to flash all in one package, right? Can you help me to find the correct 'how to' for that please? Sorry for the stupid question.
@ashyx : where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .This is the live demo unit.I need the files exactly for this ,which one I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
---------- Post added at 11:21 AM ---------- Previous post was at 11:09 AM ----------
where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .As This is the live demo unit.I need the files exactly for this .Which ones I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
Vas2008 said:
@ashyx : where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .This is the live demo unit.I need the files exactly for this ,which one I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
---------- Post added at 11:21 AM ---------- Previous post was at 11:09 AM ----------
where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .As This is the live demo unit.I need the files exactly for this .Which ones I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
Click to expand...
Click to collapse
If you want to convert to a retail unit just install my latest update of twrp 3.0.0-0 in the development section.
Factory reset in twrp then reboot to download and install the stock firmware.
Vas2008 said:
@ashyx : where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .This is the live demo unit.I need the files exactly for this ,which one I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
---------- Post added at 11:21 AM ---------- Previous post was at 11:09 AM ----------
where are the installation files of your "all in one package" ?
I have samsung galaxy tab s t800x .As This is the live demo unit.I need the files exactly for this .Which ones I have to use.By the way which way I wil do a full (rom) backup before starting ?
Thanks in advance.
Click to expand...
Click to collapse
ashyx said:
If you want to convert to a retail unit just install my latest update of twrp 3.0.0-0 in the development section.
Factory reset in twrp then reboot to download and install the stock firmware.
Click to expand...
Click to collapse
Dear Ashyx,
I have to clarify that I have the live demo unit (T800X) and I want to convert it to the original tablet that anyone can find in the market.Without the Retail Mode stuff.I want to convert it to a regular one SM T800 WiFi.
Can you please tell me which software I should use in this case,which version of rom and provide me with the steps in order to safely flash it and to avoid to damage the tablet?I will be grateful !!!!
Thanks in advance !!
Vas2008 said:
Dear Ashyx,
I have to clarify that I have the live demo unit (T800X) and I want to convert it to the original tablet that anyone can find in the market.Without the Retail Mode stuff.I want to convert it to a regular one SM T800 WiFi.
Can you please tell me which software I should use in this case,which version of rom and provide me with the steps in order to safely flash it and to avoid to damage the tablet?I will be grateful !!!!
Thanks in advance !!
Click to expand...
Click to collapse
That's what I mean by a retail unit.
A normal unit for regular use for retail sale not demo.
Just download your firmware from SamMobile and follow the steps in the previous post.
Delete retail files
Hey Ash thanks for the " all in one " it works sweetly...donated too thanks for your work in this area, so I have done everything and finished but looking at storage it tells me its 8gb but I thought these tabs where 16 or 32gb.
Do you know if there is a locked partition with the retail files protected ?
B3NJY said:
Hey Ash thanks for the " all in one " it works sweetly...donated too thanks for your work in this area, so I have done everything and finished but looking at storage it tells me its 8gb but I thought these tabs where 16 or 32gb.
Do you know if there is a locked partition with the retail files protected ?
Click to expand...
Click to collapse
It should be.
Flash the PIT file along with the stock firmware this should give you back the correct partition size.
http://forum.xda-developers.com/galaxy-tab-s/general/extracted-sm-t800-pit-download-t3071209
By the way many thanks for your donation support, much appreciated.
Bad Flash
Ooops...something major went wrong after trying that, worried something has changed, it didnt do anything and gave me mount errors so tryed format/wipe data and now it says I have 11gb storage and I get fail on odin trying to install the ota so I can update to lolipop and root, so now I am stuck on rooted kitkat ...:crying:
WHATS THIS?
This is my port of CF-AUTOROOT for the Samsung Galaxy TAB E.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE or a TWRP backup in case of problems. This will trip the knox counter.
Flash with ODIN 3.10.7 in the AP slot.
Load the respective file below into the AP slot and hit start.
cfautoroot_sm-t377p.tar
cfautoroot_sm-t560nu.tar
NOTE: ON SOME 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
STOCK TWRP IMAGE FOR SM-T377P
This is a link to the stock system, boot, modem image for the T377P in case anyone needs it. Needs to be restored with twrp.
Thanks to @shawn1976 for providing this.
https://www.dropbox.com/s/skuwsbzm2zigd83/sm-T377PVPU1AOJ5-boot-system-modem-only.zip?dl=0
Credits: Chainfire and my testers - Phrozen99 and nates730
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
FRP lock
Any suggestions on getting pass an FRP lock? My niece tried to root it but didn't turn on the enable OEM unlock. I just literally got it so don't have a back up and stock rom is no where I can find online even tried the Samsung Switch software and the T377P is not an option.
Jasn7766 said:
Any suggestions on getting pass an FRP lock? My niece tried to root it but didn't turn on the enable OEM unlock. I just literally got it so don't have a back up and stock rom is no where I can find online even tried the Samsung Switch software and the T377P is not an option.
Click to expand...
Click to collapse
Isn't there a recovery mode in the SS software that allows the firmware to be reflashed?
ashyx said:
Isn't there a recovery mode in the SS software that allows the firmware to be reflashed?
Click to expand...
Click to collapse
That was my plan ...however they do not support this model number yet so its not available to be reflashed. I checked sammobile as well figuring I could download firmware and use Odin to reflash and same situation.
There's a chance the sm-t377R4 firmware may flash as it's practically identical to the sprint firmware just a different csc.
Okay....will try and find that one.
Hi, I had a question. The Samsung Tab E is my first android device (I am a IOS user, so i know how to Jailbreak, but I don't know how to root!). My friend told me to root it, but I don't really know how to do it. Can you post a step by step tutorial. Also, after i rooted can i update my device to a newer version or do i have to remove the root. Lastly, how do you back up your device? Thank you! I appreciate your hard work!
Badob said:
Hi, I had a question. The Samsung Tab E is my first android device (I am a IOS user, so i know how to Jailbreak, but I don't know how to root!). My friend told me to root it, but I don't really know how to do it. Can you post a step by step tutorial. Also, after i rooted can i update my device to a newer version or do i have to remove the root. Lastly, how do you back up your device? Thank you! I appreciate your hard work!
Click to expand...
Click to collapse
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
ashyx said:
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
Click to expand...
Click to collapse
Thanks Man!!! Had some last questions: Can i update my device to a newer version (if available) or do i have to remove the root and how do you back up your device? Thank you again!
Badob said:
Thanks Man!!! Had some last questions: Can i update my device to a newer version (if available) or do i have to remove the root and how do you back up your device? Thank you again!
Click to expand...
Click to collapse
You can update your device with odin anytime you want but not via ota.
To back up you device you need to install TWRP.
Search Google for info on using TWRP.
ashyx said:
You can update your device with odin anytime you want but not via ota.
To back up you device you need to install TWRP.
Search Google for info on using TWRP.
Click to expand...
Click to collapse
Thanks For the help!
Where do I get TWRP for Tab E T560, and how do I install it?
Thank you.
Edit: Found the answer.
ashyx said:
There's a chance the sm-t377R4 firmware may flash as it's practically identical to the sprint firmware just a different csc.
Click to expand...
Click to collapse
I tried the t377R4 firmware that didn't work. Any idea on where I could track down a copy of the t377p? Odd I can't even use the Samsung Smart Switch or even Kies as it doesn't recognize the model number. Or if anyone has a backup available they can share please let me know.
I have a US Cellular Samsung Tab E SM-T377R4 and I rooted it using the procedure below. The root process went fine and everything is working well except Recovery Mode does not work. It just boots to a black blank screen when I try to go to Recovery Mode. But that's no big deal to me.
ashyx said:
You can follow the tutorial below, it's for the Tab A but the procedure is identical.
Obviously don't use the cf_autoroot file in the tutorial use the one here. Also note the PDA button in Odin is now called AP.
http://techchomps.com/how-to-root-the-samsung-galaxy-tab-a-9-7/
Click to expand...
Click to collapse
Stevenwsmith said:
I have a US Cellular Samsung Tab E SM-T377R4 and I rooted it using the procedure below. The root process went fine and everything is working well except Recovery Mode does not work. It just boots to a black blank screen when I try to go to Recovery Mode. But that's no big deal to me.
Click to expand...
Click to collapse
Surprised recovery doesn't work, considering the 2 devices are identical specs.
Try installing Twrp, you'll probably find that works OK.
Jasn7766 said:
I tried the t377R4 firmware that didn't work. Any idea on where I could track down a copy of the t377p? Odd I can't even use the Samsung Smart Switch or even Kies as it doesn't recognize the model number. Or if anyone has a backup available they can share please let me know.
Click to expand...
Click to collapse
Same problem here... I've been looking all over for a copy of the SM-T377P stock ROM. Anyone that happens to have a copy/link for it please share.
JohnICon said:
Same problem here... I've been looking all over for a copy of the SM-T377P stock ROM. Anyone that happens to have a copy/link for it please share.
Click to expand...
Click to collapse
What's the issue?
Rooting gone bad... Rooted my SM-T377P with KingRoot and there is an FRP Lock that comes up a week later. All of the custom ROM versions I have keep getting rejected by ODIN every time I try to flash them. The only other way I can think of doing this is to flash the stock ROM for the device.
JohnICon said:
Rooting gone bad... Rooted my SM-T377P with KingRoot and there is an FRP Lock that comes up a week later. All of the custom ROM versions I have keep getting rejected by ODIN every time I try to flash them. The only other way I can think of doing this is to flash the stock ROM for the device.
Click to expand...
Click to collapse
You realise you can't flash a custom rom with odin?
Also when you flash the stock t377r4 firmware what part fails?
The aboot fails every time I try to flash it