Develop Bugs

Spice Stellar Mi 425 STOCK ROM, ROOTING, UNROOTING, ORIGINAL STOCK/CWM-based RECOVERY

WARNING: I am not responsible for any harm done to your device while using this, do not blame me in future.. Before doing anything know what u are attempting to do... Dont worry generally nothing seriously happen if you do everything correctly..
GUIDE for ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY of SPICE Stellar Mi-425
Rooting/UnRooting without losing/affecting STOCK RECOVERY..
This is just an simple root/unroot tool for Spice Mi425.. This procedure does not alter any of your system partition or files..
Click to expand...
Click to collapse
GUIDE for FLASHING ORIGINAL STOCK/CWM RECOVERY to SPICE Stellar Mi-425
Updated : ORIGINAL STOCK RECOVERY has been updated in this post..
This post also contains old rooting method which will delete your stock recovery so i dont recommend this old method, instead of using this use ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY.. I could have deleted this part of post but some users have rooted their mobile with this old method and they would need this in future for reference..
Click to expand...
Click to collapse
ORIGINAL STOCK RECOVERY
Updated: Download Original Stock Recovery..
I have backed up this recovery from fresh mobile immediately after opening box (you cannot directly use recovery.img of CWM backup, i have done some workouts to make it work).. If you need guide to flash this recovery then read third post..
Click to expand...
Click to collapse
FRESH STOCK ROM BACKUP using ClockWorkMod Recovery v5.5.0.4
Download English CWM Touch Recovery v5.5.0.4 [Credits to love4chat for providing this Recovery]:good:
Updated: Download FRESH STOCK ROM.. Backed up from fresh phone immediately after opening box..
INSTRUCTION
1. After downloading the above STOCK ROM extract it and copy that to your sd card (do not change folder hierarchy sdcard/clockworkmod.......)..
2. Now restore using CWM Recovery v5.5.0.4, if you dont have CWM in your mobile then continue reading here..
3. Follow first 8 steps of ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY post (copy the clockworkmod folder to sdcard instead of files mentioned in that post)..
4. Now you will be booted temporarily in CWM Recovery..
5. Use backup restore option.. Select restore.. Select the folder and press yes.. You will have clean factory packed SPICE Mi425 in hand now..
Note: Use VOLUME ROCKER for navigation and long press POWER button for selection(if you were using non touch recovery)..
Click to expand...
Click to collapse
ALTERNATIVE FILES:
English CWM Recovery v5.5.0.4 (non-touch) and its backup STOCK ROM
Chinese CWM Touch Recovery v5.5.0.4 and its backup STOCK ROM..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
ORIGINAL STOCK SPLASH IMAGE
Download ORIGINAL STOCK SPLASH IMAGE..
I have backed up this splash image from fresh mobile immediately after opening box..
Click to expand...
Click to collapse
LATEST FASTBOOT DRIVER
Latest fastboot usb driver..
These are the latest drivers from AndroidSDK.. Open Device Manager and update drivers manually from the extracted content..
Click to expand...
Click to collapse
More information regarding Spice Stellar Mi-425 can be found at following XDA threads..
1. Spice Stellar (Mi-425) ICS Ready
2. Rooting Karbonn A9 and Spice MI-425 by Fonehacker + Clockworkmod [Updated-27-06-2012]
Click to expand...
Click to collapse

Rooting the phone
Thank you posting the stock ROM. Can some one write complete detailed steps about rooting and unrooting the phone using the new method with all the files to be used exclusively for our 'Stellar'. Please do not give links to other posts which makes it very confusing and the other posts contains some files for A9 also. Thank you.

GUIDE for FLASHING ORIGINAL STOCK/CWM RECOVERY of SPICE Stellar Mi-425
GUIDE for FLASHING ORIGINAL STOCK/CWM-based RECOVERY of SPICE STELLAR Mi-425
REQUIRED FILES
Download Root Tools
UPDATED: Download ORIGINAL SPICE Mi425 STOCK RECOVERY (Backed up from fresh phone immediately after opening box)
Download ENGLISH CWM TOUCH RECOVERY
Download ENGLISH CWM RECOVERY (non-touch)
INSTRUCTION
Extract the above downloaded Root Tools and RECOVERY of your choice..
Open command prompt and navigate to folder you extracted and check "adb devices".. (it should show Mi 425 in list of connected devices)
Switch off your mobile (if it is in on).. Before starting to root ensure you have atleast 70% battery..
Replace the "recovery.img" in the Root Tools folder with RECOVERY you downloaded.. (backup Root Tools "recovery.img" for future use)
Boot your Stellar in fastboot mode by holding Volume Up + Power buttons together till you see a GREEN SCREEN..
Now connect your mobile to PC via USB cable and wait for fastboot drivers to install/load automatically (tested in Windows 7).. If it did not load drivers by default then you can install it manually through the available Spice CD provided above.. You will see Windows notification icon if it is connected..
Double click and run ROOT.bat
When the RECOVERY is flashed you will be asked to press any key on cmd prompt on your PC..
Now pull out the battery and reboot..
Congrats... You have successfully FLASHED RECOVERY of your choice to Spice Stellar Mi-425..
VERDICT I have tested all myself and everything is working..
Credits to love4chat for CWM
Click to expand...
Click to collapse
GUIDE for ROOTING SPICE Stellar Mi-425 (This is old method for reference purpose only.. You will lose your recovery partition, so i dont recommend this.. If you want to root then use ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY)
NOTE: This rooting procedure is old method.. We now have easy, risk less rooting procedure (mentioned in first post)..
REQUIRED FILES
Download ADB and other Drivers from SPICE CD
Download Root Tools (little bit edited by me to make it work for Stellar) [Credits to fonehacker]
INSTRUCTION
ADVICE:This will overwrite your recovery. For getting back Stock Recovery follow FLASHING ORIGINAL STOCK RECOVERY of Spice Stellar listed above. If you do not want to alter your stock recovery follow "ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY" from first post..
Extract the Root Tools folder..
Open command prompt and navigate to folder you extracted and check "adb devices".. (it should show Mi 425 in list of connected devices)
Switch off your mobile (if it is in on).. Before starting to root ensure you have atleast 70% battery..
Boot your Stellar in fastboot mode by holding Volume Up + Power buttons together till you see a GREEN SCREEN..
Now connect your mobile to PC via USB cable and wait for fastboot drivers to install/load automatically (tested in Windows 7).. If it did not load drivers by default then you can install it manually through the available Spice CD provided above.. You will see Windows notification icon if it is connected..
Double click and run ROOT.bat
When the recovery for ROOT is flashed you will be intimated the same on cmd prompt on your PC..
Now pull out the battery and reboot..
Now rooting part... Again boot your Stellar in recovery mode by holding Volume Up + Power buttons together, first you will see GREEN SCREEN keep buttons pressed, after few seconds you will see RED SCREEN now leave buttons...
Your RED screen would show strange screen actions.. Then you will be left back with GRAY SCREEN..
Congrats... You have successfully ROOTED your Spice Stellar Mi-425.. Pull out your battery and reboot to ENJOY your ROOTED STELLAR..
VERDICT I have tested it myself and it is working..
Click to expand...
Click to collapse

renjithrs007 said:
Thank you posting the stock ROM. Can some one write complete detailed steps about rooting and unrooting the phone using the new method with all the files to be used exclusively for our 'Stellar'. Please do not give links to other posts which makes it very confusing and the other posts contains some files for A9 also. Thank you.
Click to expand...
Click to collapse
Till now their is no unrooting method for our stellar...only there is rooting and stock recovery and now stock rom
Sent from my Spice Mi-425 using Tapatalk 2

GUIDE for ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY
GUIDE for ROOTING/UNROOTING WITHOUT LOSING STOCK RECOVERY of SPICE STELLAR Mi-425
REQUIRED FILES
Download Spice Mi425 itsJame Rooting Unrooting Tool
Download ADB and other Drivers from SPICE CD
Note: The unrooting method listed here works fine with device rooted using "SpiceMi425itsJameROOTING.zip".. Device rooted using other methods can try this unrooting but i dont recommend that..
INSTRUCTION
Extract the above downloaded "Spice Mi425 itsJame Rooting Unrooting Tool"..
Copy "SpiceMi425itsJameROOTING.zip" or "SpiceMi425itsJameUNROOTING.zip" to SdCard of your Spice Mi 425 (instruction to copy files while in CWM Recovery can be found in README file)...
Turn off your mobile (if it is in on).. Before starting to root/unroot ensure you have atleast 70% battery..
Boot your Stellar in fastboot mode by holding Volume Up + Power buttons together till you see a GREEN SCREEN..
Now connect your mobile to PC via USB cable and wait for fastboot drivers to install/load automatically (tested in Windows 7).. If it did not load drivers by default then you can install it manually through the available Spice CD provided above.. You will see Windows notification icon if it is connected..
Run "fastbootDeviceCheck.bat" to check device connection..
Run "fastbootTempCWM.bat" to temporarily boot in CWM Recovery..
Shortly your mobile will load into CWM RECOVERY..
Select 2nd option "install zip from sdcard" and press enter button(on screen)..
Select "choose zip from sdcard" and press enter button..
Select "SpiceMi425itsJameROOTING.zip" or "SpiceMi425itsJameUNROOTING.zip" file, depending on your requirement and press enter..
Select "Yes - Install SpiceMi425itsJameROOTING.zip" or "Yes - Install SpiceMi425itsJameUNROOTING", depending on your requirement and press enter..
Congrats... You have either ROOTED/UNROOTED your Spice Stellar Mi-425 successfully..
VERDICT I have tested this myself and its working fine..
Click to expand...
Click to collapse

I am not sure but I think you can unroot using the unrooting method given by fonehacker in Karbon A9 thread, post no. 4.
However, first 4 steps needs to be replaced with the method compiled above by itsjame.
@itsjame, have a look at that thread and compile the unrooting method afresh
Sent from my XT800 using Tapatalk 2

Thanks itsjame for taking out time and sharing the stock rom. Pls keep up the good work

Flashing STOCK ROM will get ur phone unrooted..
ImBridge said:
I am not sure but I think you can unroot using the unrooting method given by fonehacker in Karbon A9 thread, post no. 4.
However, first 4 steps needs to be replaced with the method compiled above by itsjame.
@itsjame, have a look at that thread and compile the unrooting method afresh
Sent from my XT800 using Tapatalk 2
Click to expand...
Click to collapse
According to the Karbonn A9 thread of fonehacker they have simply flashed back the STOCK ROM to unroot the mobile..
If u need such method then its very simply, just flash the "Chinese CWMR Touch v5.5.0.4" recovery and then restore the STOCK ROM as per first post.. Then if you need your STOCK RECOVERY flash that as per instruction..

i already have done 'FOR ROOTING and FLASHING STOCK RECOVERY of Spice Stellar Mi-425'
now can I do 'ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425' over the previous one?
---------- Post added at 01:04 AM ---------- Previous post was at 12:42 AM ----------
by doing ' ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425' can I format through settings - privacy - factory reset ?
cause as of now, I can't factory reset after doing ' FOR ROOTING and FLASHING STOCK RECOVERY of Spice Stellar Mi-425'
cause the type of user I am, I need to format every week

Which Z"type " of user u r, that u need to format every week?
Sent from my XT800 using Tapatalk 2

Reply...
sadhu_s60 said:
i already have done 'FOR ROOTING and FLASHING STOCK RECOVERY of Spice Stellar Mi-425'
now can I do 'ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425' over the previous one?
---------- Post added at 01:04 AM ---------- Previous post was at 12:42 AM ----------
by doing ' ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425' can I format through settings - privacy - factory reset ?
cause as of now, I can't factory reset after doing ' FOR ROOTING and FLASHING STOCK RECOVERY of Spice Stellar Mi-425'
cause the type of user I am, I need to format every week
Click to expand...
Click to collapse
Have you done both ROOTING GUIDE for SPICE Stellar Mi-425 and GUIDE for FLASHING STOCK RECOVERY of SPICE STELLAR Mi-425.. If not do both methods.. According to theory there should be no problem in doing Factory Reset after successfully flashing both..
No there is no need to follow ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425 as you have already rooted your device.. This method is only for guys who have unrooted STOCK ROM.. Now if you have missed doing GUIDE for FLASHING STOCK RECOVERY of SPICE STELLAR Mi-425 then do that alone.. May be that would solve all your problem..

ImBridge said:
Which Z"type " of user u r, that u need to format every week?
Sent from my XT800 using Tapatalk 2
Click to expand...
Click to collapse
the type tat loves to format & keep the system tiptop
---------- Post added at 10:35 AM ---------- Previous post was at 10:28 AM ----------
itsjame said:
Have you done both ROOTING GUIDE for SPICE Stellar Mi-425 and GUIDE for FLASHING STOCK RECOVERY of SPICE STELLAR Mi-425.. If not do both methods.. According to theory there should be no problem in doing Factory Reset after successfully flashing both..
No there is no need to follow ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425 as you have already rooted your device.. This method is only for guys who have unrooted STOCK ROM.. Now if you have missed doing GUIDE for FLASHING STOCK RECOVERY of SPICE STELLAR Mi-425 then do that alone.. May be that would solve all your problem..
Click to expand...
Click to collapse
ooooooooookkkkk..... i just did the ROOTING GUIDE for SPICE Stellar Mi-425 ...i thought doing GUIDE for FLASHING STOCK RECOVERY of SPICE STELLAR Mi-425 would remove the root
tnx for the clarification bro
==========================
http://forum.xda-developers.com/showthread.php?t=1746228
i think it would b great help to spice droid users if u link to it

sadhu_s60 said:
ooooooooookkkkk..... i just did the ROOTING GUIDE for SPICE Stellar Mi-425 ...i thought doing GUIDE for FLASHING STOCK RECOVERY of SPICE STELLAR Mi-425 would remove the root
tnx for the clarification bro
Click to expand...
Click to collapse
Instead of FLASHING STOCK RECOVERY of SPICE STELLAR you could FLASH CHINESE CWMR RECOVERY(for sure we will get English version as few friends are working with that).. Though it is Chinese it has advanced facilities.. Only through CWMR u could restore STOCK ROM if something goes wrong.. I have updated how to flash CWMR in same GUIDE post..

Stock rom given by itsjame is working
CONFIRMED :STOCK ROM GIVEN BY itsjame is working ...I was able to Bring back the stock stellar by restoring through CWM chinese recovery...Now ill test the the ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425 by itsjame bro and will report in few minutes
---------- Post added at 01:54 PM ---------- Previous post was at 01:31 PM ----------
itsjame said:
ROOTING WITHOUT LOSING STOCK RECOVERY for SPICE Stellar Mi-425
Click to expand...
Click to collapse
NOT WORKING JUST NOW CHECKED....I flashed using the above procedure but it did not root my phone

suhas.holla said:
NOT WORKING JUST NOW CHECKED....I flashed using the above procedure but it did not root my phone
Click to expand...
Click to collapse
Just removed it.. Bcoz it is of no use as we got everything seperately...:highfive:

tnx for the clarification

Partition SD using CWM recovery english
Has anyone partitioned the SD Card using the CWM english recovery? I have done it but unable to mount it as stock rom does not support App2SD+. Can someone help

Itsjame,
Plz. Consider including new rooting method be love4chat. He posted:
A New Alternate Root Method Through CWM (Simple Method)
-Flash CWM English Recovery Posted By Me And Simply Install This Zip File Through CWM And Phone Will Be Rooted!!!
http://www.mediafire.com/?ryyxqv945cfa261
Sent from my XT800 using Tapatalk 2

i am using link 2 sd.
my phone is unrooted but it works well and moreover it is a free app
[QUOTE=cdwarak;28287576]Has anyone partitioned the SD Card using the CWM english recovery? I have done it but unable to mount it as stock rom does not support App2SD+. Can someone help[/QUOTE]

cdwarak said:
Has anyone partitioned the SD Card using the CWM english recovery? I have done it but unable to mount it as stock rom does not support App2SD+. Can someone help
Click to expand...
Click to collapse
I have partitioned the SD Card using CWM Recovery and installed link2sd from market.. Select ext3 in link2sd if it prompts.. I think link2sd would be better than app2sd..

Upgrading alcatel one touch t10 to jellybean

Good day guys,
Im new to this kind of thing so please be easy on me with the terms,
I was wondering if it is possible to upgrade my android version to jellybean?
I've tried the search function but can't find a thread/topic about my tablet
Thanks in advance
Sent from my one touch T10 using xda app-developers app

That's my question too..
Sent from my one touch T10 using xda app-developers

Cyanogenmod compatible with alcatel one touch t10
CM7, CM9, CM10, CM10,1 go tho http://forum.xda-developers.com/showthread.php?t=2012654 and to work on our tablets use Pascal 2 kernel http://crewrktablets.arctablet.com/?wpfb_dl=529

Ok, but is there some tutorial how to do that?
For starters I can't even install cmw on my tab...I just won't work...can anyone help?
Sent from my one touch T10 using xda app-developers app

gogo157 said:
Ok, but is there some tutorial how to do that?
For starters I can't even install cmw on my tab...I just won't work...can anyone help?
Sent from my one touch T10 using xda app-developers app
Click to expand...
Click to collapse
-first of all download these 2 archives: pascal2 kernel and beta build - v1.2 frome my first post , these are for CM10.
-unpack them with 7zip, inside the Oma_Odys_Loox_JB_CM10_4.1.2_v1.2 are two important folders
-first /rockdev/image inside this one must replace kernel.img with that extracted frome pascal2
-Now with the tablet off run as an administrator the RKAndroidTool now holding down the (-)volume button insert the usb cable and wait to see if windows automatically installs the drivers if not do it manually necessary drivers are in USB Driver
-after the program (RKAndroidTool) recognizes the device click on eraseIDB after this operation is complete check the box loader and click run
-wait about 5 minutes after which the device will start to boot
-first time after flash device automatically enter in CWM recovery for a possible application of fixes ,jost reboot the tab from cwm menu
edit
Jelly Bean 4.1.1 official version, released for pascal 2.
I do not know who's who cloned but actually seems to be the same tab
this rom works pretty well and is perfectly compatible with our tab
http://www.bqreaders.com/pt/transferencias-pascal-2.html
AOSP Jb 4.2.2 http://crewrktablets.arctablet.com/?p=1291
use pascal2 Homebrew Kernel or T10 stock
if something goes wrong and you have to Flash the original firmware see attached files

synescu said:
-first of all download these 2 archives: pascal2 kernel and beta build - v1.2 frome my first post , these are for CM10.
-unpack them with 7zip, inside the Oma_Odys_Loox_JB_CM10_4.1.2_v1.2 are two important folders
-first /rockdev/image inside this one must replace kernel.img with that extracted frome pascal2
-Now with the tablet off run as an administrator the RKAndroidTool now holding down the (-)volume button insert the usb cable and wait to see if windows automatically installs the drivers if not do it manually necessary drivers are in USB Driver
-after the program (RKAndroidTool) recognizes the device click on eraseIDB after this operation is complete check the box loader and click run
-wait about 5 minutes after which the device will start to boot
if something goes wrong and you have to Flash the original firmware see attached files
Click to expand...
Click to collapse
wuhuuu, it work's thx man!!

synescu said:
-first of all download these 2 archives: pascal2 kernel and beta build - v1.2 frome my first post , these are for CM10.
-unpack them with 7zip, inside the Oma_Odys_Loox_JB_CM10_4.1.2_v1.2 are two important folders
-first /rockdev/image inside this one must replace kernel.img with that extracted frome pascal2
-Now with the tablet off run as an administrator the RKAndroidTool now holding down the (-)volume button insert the usb cable and wait to see if windows automatically installs the drivers if not do it manually necessary drivers are in USB Driver
-after the program (RKAndroidTool) recognizes the device click on eraseIDB after this operation is complete check the box loader and click run
-wait about 5 minutes after which the device will start to boot
if something goes wrong and you have to Flash the original firmware see attached files
Click to expand...
Click to collapse
Hi all.
I need help!
I followed steps for jelly bean upgrade and my alcatel t10 stucks into clockworkmode recovery.
I have pascal splash screen and tablet goes into cwm recovery.
I cant do nothing.
all i have now is CWM-based ecovery 6.0.1.5
Please help

ninoid said:
Hi all.
I need help!
I followed steps for jelly bean upgrade and my alcatel t10 stucks into clockworkmode recovery.
I have pascal splash screen and tablet goes into cwm recovery.
I cant do nothing.
all i have now is CWM-based ecovery 6.0.1.5
Please help
Click to expand...
Click to collapse
if you see this after normal flash procedure is everything ok. Simply select reboot device in CWM.IF this is not the case then try to redo it all over again more carefully

I forgot to backup my stock ROM! PLEASE IF YOU HAVE ONE, SEND IT TO ME :crying:

mitch101 said:
I forgot to backup my stock ROM! PLEASE IF YOU HAVE ONE, SEND IT TO ME :crying:
Click to expand...
Click to collapse
in my second post has a file attachment "tools.zip" that contains a document with links where you can download the original firmware and the software needed
---------- Post added at 04:18 PM ---------- Previous post was at 03:59 PM ----------
and by the way Oma included alcatelT10 providing support in his jelybean build
"Jelly Bean has landed on Alcatel T10
Kernel is here.
Pls find attached the model fix.
- Oma -"
http://forum.xda-developers.com/showpost.php?p=37906789&postcount=759

synescu said:
in my second post has a file attachment "tools.zip" that contains a document with links where you can download the original firmware and the software needed
---------- Post added at 04:18 PM ---------- Previous post was at 03:59 PM ----------
and by the way Oma included alcatelT10 providing support in his jelybean build
"Jelly Bean has landed on Alcatel T10
Kernel is here.
Pls find attached the model fix.
- Oma -"
http://forum.xda-developers.com/showpost.php?p=37906789&postcount=759
Click to expand...
Click to collapse
Thanks! Now back to my handy stock firmware. Except I hate the keyboard. XD.

mitch101 said:
Thanks! Now back to my handy stock firmware. Except I hate the keyboard. XD.
Click to expand...
Click to collapse
indeed very ugly keyboard
for those interested alcatel T10 stock rom .with some app cleaned and fully rooted
https://docs.google.com/file/d/0B67rXGNB6IzwbTQ5cXVFZkozRlE/edit?usp=sharing

BRICKED
my alcatel t10 tablet got bricked in the process.. help it does not power up or even go to recovery. its not recognized by rk android tool. the rk android tool only says "found rkandroid maskrom rock usb. (((((((((((((((((((((((((((((((((((((((

my tablet came to life. but my display screen is somehow not centered. i noticed this when i installed the pascal kernel along with the cwm. what to do (((((((((

these is my screen now. after installing the pascal kernel help me please

maglev0730 said:
these is my screen now. after installing the pascal kernel help me please
Click to expand...
Click to collapse
If you want to return to stock image have to use this program ("RKBatchTool.exe") and alcatael T10 update.img that you can download from my second post on the first page or you can use the image modified by me

synescu said:
If you want to return to stock image have to use this program ("RKBatchTool.exe") and alcatael T10 update.img that you can download from my second post on the first page or you can use the image modified by me
Click to expand...
Click to collapse
yes i have downloaded the stock rom of the alctel t10 of yours which is fully rooted. i used the rkbatchtool and pressed restore and i have also tried the update button still no luck. or do i have to download this link included in your microsoft word file? im in the philippines and the links says 404 not found.

i now restored my screen through the update img. thanks for the help!

synescu said:
If you want to return to stock image have to use this program ("RKBatchTool.exe") and alcatael T10 update.img that you can download from my second post on the first page or you can use the image modified by me
Click to expand...
Click to collapse
Hi, I can not get the USB drivers to install, I have alcatel t10, windows 7 x86.
Upon forcing the USB drivers installation, clicking the have disk and pointing to the USB Drivers folder, then selecting the RK29 devices. After that on the device manager, I see the RK29 Devices with yellow exclamation and a status of "The device can not start(error 10)"
Rebooted my laptop but the status is still the same.
---------- Post added at 04:23 PM ---------- Previous post was at 04:07 PM ----------
Never mind... I got it working

kurtc171 said:
Hi, I can not get the USB drivers to install, I have alcatel t10, windows 7 x86.
Upon forcing the USB drivers installation, clicking the have disk and pointing to the USB Drivers folder, then selecting the RK29 devices. After that on the device manager, I see the RK29 Devices with yellow exclamation and a status of "The device can not start(error 10)"
Rebooted my laptop but the status is still the same.
Click to expand...
Click to collapse
If you have one more try on another computer.I have the same problem on one of my pc
the RKAndroidTool still recognize the device when you connect with (vol --) + (power) buttons?

[guide][how to] cwm 6.0.4.5

Hi!
I've created this thread for share a guide for use the CWM 6.0.4.5 for falsh the CM11 becuase this recovery has an issue that display always a blue screen but it works.
Part 1
-Download cm-11-gio.zip
-Boot to recovery 6.0.4.5, press
PHP:
Vol. down -> Home -> Vol. down -> Vol. down -> Home
You'll enter "Install zip from sideload"
Part 2
-Download adb 1.0.31. Connect your phone to PC via usb. Launch adb and type
Code:
adb devices
-you'll get this
Code:
12346789 sideload
-Every things go good so now type
Code:
adb sideload c:\cm-11-gio.zip
-wait 5-6 min for the rom to be copied to phone abd flashed
Part 3 The end
-After the flashing press on the phone
PHP:
back -> back -> vol. down -> vol.down -> Home -> vol. down -> Home
-You've full wiped the phone
-Press
PHP:
now back -> back -> Home
Reboot to system
Wait for the rom to boot up
Enjoy!
A big thanks to @belyava for this guide

DiavoloPowa said:
Hi!
I've created this thread for share a guide for use the CWM 6.0.4.5 for falsh the CM11 becuase this recovery has an issue that display always a blue screen but it works.
Part 1
-Download cm-11-gio.zip
-Boot to recovery 6.0.4.5, press
PHP:
Vol. down -> Home -> Vol. down -> Vol. down -> Home
You'll enter "Install zip from sideload"
Part 2
-Download adb 1.0.31. Connect your phone to PC via usb. Launch adb and type
Code:
adb devices
-you'll get this
Code:
12346789 sideload
-Every things go good so now type
Code:
adb sideload c:\cm-11-gio.zip
-wait 5-6 min for the rom to be copied to phone abd flashed
Part 3 The end
-After the flashing press on the phone
PHP:
back -> back -> vol. down -> vol.down -> Home -> vol. down -> Home
-You've full wiped the phone
-Press
PHP:
now back -> back -> Home
Reboot to system
Wait for the rom to boot up
Enjoy!
A big thanks to @belyava for this guide
Click to expand...
Click to collapse
Sorry dude, but don't think this guide belongs in this section, although it's really useful for everyone owning vietnamese Gio!

Well, hello there. I'm confused about how to install CM11 on Gio. Reading page by page on CM11 thread and also CWM 6.0.4.5 thread I saw many people have bluescreen on recovery and got stuck when revert back to stock. That happens on Gio with Vietnamese and Chinese build factory. I have my Gio on Indonesia, on the back I can see 'Dibuat Di Korea Selatan' which mean in english is 'Made In South Korea'. So, if I install the CWM 6.0.4.5, I don't have any bluescreen on recovery? I'm affraid to bricking my Gio, mine already hardbrick 2 times and its painful :|

saldymhmd said:
Well, hello there. I'm confused about how to install CM11 on Gio. Reading page by page on CM11 thread and also CWM 6.0.4.5 thread I saw many people have bluescreen on recovery and got stuck when revert back to stock. That happens on Gio with Vietnamese and Chinese build factory. I have my Gio on Indonesia, on the back I can see 'Dibuat Di Korea Selatan' which mean in english is 'Made In South Korea'. So, if I install the CWM 6.0.4.5, I don't have any bluescreen on recovery? I'm affraid to bricking my Gio, mine already hardbrick 2 times and its painful :|
Click to expand...
Click to collapse
My Gio is also made in South Korea and it got bluescreen with CWM 6.0.4.5. I need to blind flash the CM11 rom.
In case anything goes wrong, you can simply odin the recovery (cwm-5.0.2.7-ext4only-odin.tar.md5) to the Gio and recover the previous backup.
http://forum.xda-developers.com/showpost.php?p=49031142&postcount=91

saldymhmd said:
Well, hello there. I'm confused about how to install CM11 on Gio. Reading page by page on CM11 thread and also CWM 6.0.4.5 thread I saw many people have bluescreen on recovery and got stuck when revert back to stock. That happens on Gio with Vietnamese and Chinese build factory. I have my Gio on Indonesia, on the back I can see 'Dibuat Di Korea Selatan' which mean in english is 'Made In South Korea'. So, if I install the CWM 6.0.4.5, I don't have any bluescreen on recovery? I'm affraid to bricking my Gio, mine already hardbrick 2 times and its painful :|
Click to expand...
Click to collapse
bro you are lucky, mine is said "Dibuat di Vietnam" so mine is Vietnamese, yes I got bluescreen and kitkat working

Just use 6.0.3.2...
Sent from my GT-S5660 using xda app-developers app

emyaz said:
Just use 6.0.3.2...
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
CWM 6.0.3.2 can install CM11?

saldymhmd said:
CWM 6.0.3.2 can install CM11?
Click to expand...
Click to collapse
Yes, I installed cm11 with 6.0.3.2 by mmb team and it worked... also I read (not sure if it's true) that cm11 was made to work with 6.0.3.2
Sent from my GT-S5660 using xda app-developers app

emyaz said:
Yes, I installed cm11 with 6.0.3.2 by mmb team and it worked... also I read (not sure if it's true) that cm11 was made to work with 6.0.3.2
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Can someone else confirm that CWM 6.0.3.2 can flash CM11 ?
Sent from my GT-S5660 using Tapatalk 2

Gyovany96 said:
Can someone else confirm that CWM 6.0.3.2 can flash CM11 ?
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I confirm CWM 6.0.3.2 canNOT flash CM11 for my GIO.

Then maybe @emyaz has phone made in korea/china ( or this doesn't matter ? )How can he flash CM11 with CWM 6.0.3.2 ?
Sent from my GT-S5660 using Tapatalk 2

i cant install cm11 with CWM 6.0.3.2 mmb but can with the sideload way,but only with the cwm 6.0.4.5

devrieshh said:
i cant install cm11 neither with CWM 6.0.3.2 mmb but can with the sideload way.
Click to expand...
Click to collapse
I can't use sideload because I am using Win 8.1 and I can't risk a brick because Odin doesn't work too on Win 8.1

Gyovany96 said:
I can't use sideload because I am using Win 8.1 and I can't risk a brick because Odin doesn't work too on Win 8.1
Click to expand...
Click to collapse
,you can install cwm 6.0.4.5 and use adb only problem is you will be stucked with cm11 unless you are able to flash with adb other cwm(is possible see general forum somewere)
.

@Gyovany96
I don't think that I have a Korean/Chinese model. I live in Germany so I think it's a European model. Where can I look to see if it's Korean/Chinese or not?
And it's maybe important to know that I didn't flashed the cwm 6.0.3.2 with the old recovery. I did it with the terminal emulator and the command "flash_image".

emyaz said:
@Gyovany96
I don't think that I have a Korean/Chinese model. I live in Germany so I think it's a European model. Where can I look to see if it's Korean/Chinese or not?
And it's maybe important to know that I didn't flashed the cwm 6.0.3.2 with the old recovery. I did it with the terminal emulator and the command "flash_image".
Click to expand...
Click to collapse
Pull the battery out and read "Made in Vietnam/Korea/China"

emyaz said:
@Gyovany96
I don't think that I have a Korean/Chinese model. I live in Germany so I think it's a European model. Where can I look to see if it's Korean/Chinese or not?
And it's maybe important to know that I didn't flashed the cwm 6.0.3.2 with the old recovery. I did it with the terminal emulator and the command "flash_image".
Click to expand...
Click to collapse
Please advise the command you use to flash the Rom. Also any command can flash recovery via terminal emulator?
Thanks!

Open terminal emulator.
'su'
'flash_image recovery /path/to/recovery/ recovery.img'
That's it... it worked on my phone with cm7...
(You can get the 'recovery.img' file by extracting the zip file)

Gyovany96 said:
I can't use sideload because I am using Win 8.1 and I can't risk a brick because Odin doesn't work too on Win 8.1
Click to expand...
Click to collapse
Try Heimdall
http://forum.xda-developers.com/showthread.php?t=755265
http://glassechidna.com.au/heimdall/

doppelhelix said:
Try Heimdall
http://forum.xda-developers.com/showthread.php?t=755265
http://glassechidna.com.au/heimdall/
Click to expand...
Click to collapse
does heimdall already support the gio,i dont think so

KitKat 32bit to LP 64 bit in a snap.

SO... DO we want to flash stock lollipop and then flash custom roms... It is abselutely not needed now.
If you are somone on L trying to go to KK here is the thread for you http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
So straight to steps....
1) You have to download https://drive.google.com/open?id=0B4etFrzyEA01UDlvVUpNaHJVTjQ&authuser=0
2) You have to flash that zip with a custom recovery. Explaned below
3) Flash any 64bit ROMs you like....
How to flash zip
Copy the file form PC to Yu Yureka(If you have downloaded it with PC)
Reboot into recovery ( For easy reboot into recovery you have to enable advanced reboot in developer options )
Select Install Zip file
Select install for SDcard
Browse to the folder you have put it.
Install it.
And Vola!
SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
So... Guys as usual Hit Thanks if you fond this post useful....

Abhiram Shibu said:
SO... DO we want to flash stock lollipop and then flash custom roms... It is abselutely not needed now.
If you are somone on L trying to go to KK here is the thread for you http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
So straight to steps....
1) You have to download https://drive.google.com/open?id=0B4etFrzyEA01UDlvVUpNaHJVTjQ&authuser=0
2) You have to flash that zip with a custom recovery. Explaned below
3) Flash any 64bit ROMs you like....
How to flash zip
Copy the file form PC to Yu Yureka(If you have downloaded it with PC)
Reboot into recovery ( For easy reboot into recovery you have to enable advanced reboot in developer options )
Select Install Zip file
Select install for SDcard
Browse to the folder you have put it.
Install it.
And Vola!
SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
So... Guys as usual Hit Thanks if you fond this post useful....
Click to expand...
Click to collapse
Wow thanks alot.
Btw will it wipe internal storage?

Does this zip comes with any 64bit recovery or do i need to go to fastboot mode & install 64bit recovery?
Is it compatible with philztouch recovery?

Also, what happens when this zip is flashed?
Before flashing a Rom & if i'm in recovery, will my internal memory be shown in PC when i connect yureka via data cable?(should i copy CM 12.x Rom to internal memory before flashing this zip? )
-Sorry for asking so many qt's all at once... But would appreciate if u can answer all of my queries to get rid of my worries

works like a charm, first boot on blisspop was really smooth, no lag and glitches like stock cm12....got blank screen when i tried to get into recovery(which was obvious) but from second boot, i was stuck on the YU boot logo....It was because of the 32bit recovery...flashed 64-bit CWM through fast boot and again i successfully booted
PS- It doesnt wipe your sdcard

ujilraj said:
Does this zip comes with any 64bit recovery or do i need to go to fastboot mode & install 64bit recovery?
Is it compatible with philztouch recovery?
Click to expand...
Click to collapse
Any 64 bit recovery will work. In my openion I recoment TWRP recovery. It is a touch recovery and has many options like file manager, backup compression etc.
Sorry for the late reply my school reopened so I didn't get any time to read this thread....
Anyway I am going to make an another zip file for flashing recovery within 2 days. Both 64 bit and 32bit....
Both TWRP and CWM.

ujilraj said:
Also, what happens when this zip is flashed?
Before flashing a Rom & if i'm in recovery, will my internal memory be shown in PC when i connect yureka via data cable?(should i copy CM 12.x Rom to internal memory before flashing this zip? )
-Sorry for asking so many qt's all at once... But would appreciate if u can answer all of my queries to get rid of my worries
Click to expand...
Click to collapse
So.... It does not wipe your SDCARD when following this method. Its safe. Only thing you have to do is flash 64 bit recovery.
Any way data backup is highly recommended. We ate playing with firmware know? Any thing can happen!

Jimmymanda1 said:
works like a charm, first boot on blisspop was really smooth, no lag and glitches like stock cm12....got blank screen when i tried to get into recovery(which was obvious) but from second boot, i was stuck on the YU boot logo....It was because of the 32bit recovery...flashed 64-bit CWM through fast boot and again i successfully booted
PS- It doesnt wipe your sdcard
Click to expand...
Click to collapse
Thank you for your reply while I was away!!!

Yes it works as promised... No issues

SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
Click to expand...
Click to collapse
Hey @Abhiram Shibu could you tell me what exactly does this flashing do? Does it change our bootloader?

So... This is what it does...
Frozen_Lemon said:
Hey @Abhiram Shibu could you tell me what exactly does this flashing do? Does it change our bootloader?
Click to expand...
Click to collapse
It actually has some of modem files, 64 bit partition details, fastboot(BIOS) for 64bit. You can go ahead and exact the zip file and read the script inside it. It does not have a 64bit recovery so you wold have to flash a recovery of your choice with fastboot. I hope you got your doubts cleared. If you have any further doubts feel free to reply:good:. i am planning to merge recovery flasher into this zip stay tuned!

Make a 64bit to 32 bit file also
Sent from my YUREKA using XDA Free mobile app

Abhiram Shibu said:
It actually has some of modem files, 64 bit partition details, fastboot(BIOS) for 64bit. You can go ahead and exact the zip file and read the script inside it. It does not have a 64bit recovery so you wold have to flash a recovery of your choice with fastboot. I hope you got your doubts cleared. If you have any further doubts feel free to reply:good:. i am planning to merge recovery flasher into this zip stay tuned!
Click to expand...
Click to collapse
Yea, I did mate Thanks thats a cool script. :thumbsup:
And hey, I'd suggest you leave out the recovery, cuz some people like to have different tastes (just a suggestion ) and nice work

gtsfreak said:
Make a 64bit to 32 bit file also
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
I have done that earlier than this lol.... Here is the link http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
I hope it works.
YU Play GOD!

Thanks bro will try
Sent from my YUREKA using XDA Free mobile app

Hey man I still have a question lingering. Can I revert to cm11 after flashing this using my Backup?
Edit: Oops wrong thread I know but you know what I meant right? :thumbup:
Edited again: I found it it mate thanks again great work bro
Sent from my AO5510 using XDA Free mobile app

Yes of course this is my thread on that http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587 . Very very sorry for the late reply.

any other way to flash recovery?
I dont have a pc right now. After flashing this file and the rom, can i flash the recovery by any other method which does not require pc?

shekhawat2 said:
I dont have a pc right now. After flashing this file and the rom, can i flash the recovery by any other method which does not require pc?
Click to expand...
Click to collapse
Yes you can. If the ROMs rooted already then you can use the app Flashify to flash the recovery (I guess your phones booting up)
If not you do NEED a pc

Abhiram Shibu said:
SO... DO we want to flash stock lollipop and then flash custom roms... It is abselutely not needed now.
If you are somone on L trying to go to KK here is the thread for you http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
So straight to steps....
1) You have to download https://drive.google.com/open?id=0B4etFrzyEA01UDlvVUpNaHJVTjQ&authuser=0
2) You have to flash that zip with a custom recovery. Explaned below
3) Flash any 64bit ROMs you like....
How to flash zip
Copy the file form PC to Yu Yureka(If you have downloaded it with PC)
Reboot into recovery ( For easy reboot into recovery you have to enable advanced reboot in developer options )
Select Install Zip file
Select install for SDcard
Browse to the folder you have put it.
Install it.
And Vola!
SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
So... Guys as usual Hit Thanks if you fond this post useful....
Click to expand...
Click to collapse
Thanks dude, works perfectly !!

Help Needed....Canvas A1 Recovery mode showing No command found please help....

hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks

I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.

Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
unlocking bootloader will wipe all the date right ??

shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMEDIATELY.
:good::good:HIT THANKS IF HELPED!:good::good:

This is the screen I am getting when I enter recovery mode

Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
this is the screen I am getting when I enter recovery mode

shyamkrrish66166 said:
This is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:

shyamkrrish66166 said:
this is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.

Thanks guys. I will try it and let you know.

Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
Thanks. .. I will try it and let you knw
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse

Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks

shyamkrrish66166 said:
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks
Click to expand...
Click to collapse
You can use kingroot or android one toolkit to root your phone if you are running KITKAT or LOLLIPOP.
To root MARSHMALLOW, you need to follow the steps mentioned HERE
:good::good:

I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium

shyamkrrish66166 said:
Thanks. .. I will try it and let you knw
Click to expand...
Click to collapse
Hi,
In marshmallow is there an option to use as card as the internal memory, so that we could install more apps ??

shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
Hey man ...after showing no command
Press power+ vol up for 5 sec and release
U will be in recovery menu
Hit thanks

I'm trying to flash firmware in Karbonn Sparkle V (Android One) but it is not getting connected with computer. I installed the drivers manually in the computer but when i connect the device, the computer trying to install the device driver software again and getting failed. How to solve the problem?

yes this works
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
This method works thanks!!!?