CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
PreReqs: Unlocked Bootloader
INSTRUCTIONS
First time installing CyanogenMod 11.0 to your Galaxy Note 2 L900, or coming from another ROM:
- Read known issues ans FAQs
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM11.0 ZIPs to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
- Copy CM11.0 ZIP to your SDCard
- Boot into Recovery
- Flash CM11.0 zip from SDCard
- Reboot
BUG LIST
-BT Voice Search
[Nightlies] http://download.cyanogenmod.org/?device=l900
[GAPPS 4.4] http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
Sources http://github.com/CyanogenMod
Thanks! Can't wait to try this
Long live Sbrissen!
DarkManX4lf said:
Long live Sbrissen!
Click to expand...
Click to collapse
Sweet!!!!! Getting the N5 soon but def flashing this rom on my Note 2. Thanks alot!
sbrissen said:
Click to expand...
Click to collapse
I am not getting any service 3g or LTE. Wifi works fine, but when trying to sync my phone with Google using the two step i recieve no texts or phone calls even over wifi. any suggestions?
skulmunkie said:
I am not getting any service 3g or LTE. Wifi works fine, but when trying to sync my phone with Google using the two step i recieve no texts or phone calls even over wifi. any suggestions?
Click to expand...
Click to collapse
Did you flash with twrp? this is usually a sympton of it. CWM is the recommended recovery for this.
sbrissen said:
Did you flash with twrp? this is usually a sympton of it. CWM is the recommended recovery for this.
Click to expand...
Click to collapse
i did. I am retrying it now and will update if successfull
this thing is slippery smooth.... thanks you so much for letting us have it
I cannot seem to get data working on 3g evdo. Everything else works (4g lte, 1x, wifi, 3g ehrpd).
Here are some images of about phone > status
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see, I get mobile network state disconnected, when on evdo.
I'll try to get logs tomorrow.
Thank you very much for this. I checked out the one you posted in the cm 10.2 thread & that ran great, very cool that camera works now, after the reboot. Thanks again sbrissen
Sent from my SPH-L900 using Xparent BlueTapatalk 2
I get "no such file or directory" error if I try to use this to turn off the backlights. It worked in CM 10.2. Any other way...or something I am missing?
echo "1" > /sys/class/sec/sec_touchkey/force_disable (in terninal to turn off)
echo "0" > /sys/class/sec/sec_touchkey/force_disable (in terninal to turn on)
Sent from my SPH-L900 using Tapatalk
Anyone getting the phantom voice mail icon?
I can only get 4G, but it always says no service sprint. For mobile network state it just says "disconnected" and Service state is "Out of service" Even with 4G turned off I don't get any signal besides wifi. Otherwise rom is slick as ****
Can anyone confirm flashing this rom breaks sound? I flashed CWM, flashed this rom with gapps, booted up and got no sound at all. I'd previously had working sound on my AOSPA3+ rom moments before. I reflashed TWRP and restored my nandroid, and still have no sound. No matter what wipe or rom I flash my sound is broke. Anyone have this same issue?
@saboture my sound is still working fine
Dariste said:
@saboture my sound is still working fine
Click to expand...
Click to collapse
Word. Guess my phone decided to die randomly then. Thanks.
saboture said:
Word. Guess my phone decided to die randomly then. Thanks.
Click to expand...
Click to collapse
Did you verify md5? Maybe you got a bad download?
Did you try wiping everything (mount and wipe system, factory reset)? And then flashing again?
If those didn't help maybe flashing to stock and starting over again (I just had something weird on CM10.2 with my data that forced me to go stock and do a hands free activation to alleviate the mess)
It ain't bricked until it's bricked!! lol :good:
not sure if its related or not but even on my old 4.3 rom and even my 4.1 touchwiz room isn't working. Phone is just listed as out of service...
I know it's early, but will this ROM be made compatible with twrp? The reason I ask is because cwm doesn't support device encryption.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Incredible 2, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0.1-Inc2
Download: link
Mirror: link
MD5sum: 178fb833abff50ddc86f980617030d53
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Hmm. Were experiencing data, wifi, issues on the stable. Wifi breaks radio, data arrows still dont animate.Do you guys know this? I'm sure others will chime in.
Sent from my Incredible 2 using XDA App
I'd definitely flash, if there weren't serious issues
Both nightly and stable is broken! Enabling then disabling wifi kills the voice and data. Airplane mode messes up everything.
Please read the comments
http://forum.xda-developers.com/showthread.php?t=1296842
http://forum.xda-developers.com/showthread.php?t=1156343
Quote the following and add to it on bottom if you find other bugs
************** Stable release issues ****************************
- Enabling wifi kills the ability to send/receive text messages via verizon towers
- Disabling wifi does not fix the issue
- Airplane mode renders phone useless and can't get it out of airplane mode
- Restarting phone fixes the airplane mode issue
- Compass doesn't work
- Data arrows don't animate when 3g is downloading/uploading
**********************************************************
anything else?
if i remember correctly the compass doesn't work right either.
did the wired headset get fixed yet?
seejoshplay said:
did the wired headset get fixed yet?
Click to expand...
Click to collapse
What is the issue? What build did you have this issue with?
seejoshplay said:
did the wired headset get fixed yet?
Click to expand...
Click to collapse
If your taking about the mic working with the headset, then yes.
Sent from my Incredible 2 using XDA App
WiFi Breaks Radio??
OK I tried to "Break the Radio" by turning WiFi ON, connecting to my home network, placing a voice call, open a browser on the phone and leave a voicemail at the same time,
The ONLY real issue I can find is the Airplane mode issue and I get around that by de-selecting Data enabled in Mobile network settings.
I am running the stock radio (havent updated).
Currently running Tiamat 1.1.3 (battery issues reported with 1.1.4).
Oh, and when I first booted from flash, I had to enable International data roaming.
Did "Everyone" that seems to have this WiFi Breaking the Radio issue,
Check the MD5 of the .zip on the phone?
I have had data cable issues leaving me with a bad file on the phone.
Fully wipe data Factory Reset in CW Recovery NOT RM?
Try to use WiFi BEFORE restoring ANY apps...?
Use Titanium Backup to restore app only for those apps that might alter the core OS?
I have not flashed without wiping at least cache and davlik between nightlies and FULL data wipe "Factory Reset" when changing base ROM.
I wonder if latest radio is causing the broken data and voice.
Cac2us
What version of radio do u show in your about phone?
Sent from my Incredible 2 using xda premium
Stock radio
Droidel said:
I wonder if latest radio is causing the broken data and voice.
Cac2us
What version of radio do u show in your about phone?
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I just noticed that the build shows "Nightlly"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just remember if your gona flash a radio, make sure to check the MD5 on the phone. Stuf happens...
Stop saying it's corrupt radio/ROM images. It's very clearly not. CWM checks MD5 sum before flashing and a bad radio flash would leave a phone bricked. There certainly wouldn't be TONS of people on different builds with the same exact problem.
For the past few weeks the nightly builds have been causing the same problem for me. Turning WiFi on completely breaks Verizon voice and data until a reboot. I THOUGHT that this being a final release would have the problem solved but I guess not.
3g also does not work in gsm mode. If use only 2g networks is not checked, the phone all but locks up and requires a wipe.
Sent from my Incredible 2 using XDA App
I just noticed that the radio I'm running is from a Froyo ROM... so I'm going to try the one that's listed in the picture posted by the guy who isn't having any problems and I'll report back.
EDIT: Same issues on radio 1.09.01.0622.
Sorry to hear about the continuing bugs for our inc2. I was super excited to see the inc2 listed as a supported device from the post on Engadget, but I'm glad I checked the forum before flashing. I too was having issues on nightly 95..
Same voice connectivity issues exist on radio 1.09.01.0722.
Issue also exists when using Tiamat 1.1.3. To the guy who actually doesn't have any problems... I wish we could tell what it is that you're doing differently than the rest of us.
Bugs
The usual AOSP bugs still prevalent? I saw the mic issue was mentioned what about the compass in Google Maps that would be a miracle.
Grouper said:
Stop saying it's corrupt radio/ROM images. It's very clearly not. CWM checks MD5 sum before flashing and a bad radio flash would leave a phone bricked. There certainly wouldn't be TONS of people on different builds with the same exact problem.
For the past few weeks the nightly builds have been causing the same problem for me. Turning WiFi on completely breaks Verizon voice and data until a reboot. I THOUGHT that this being a final release would have the problem solved but I guess not.
Click to expand...
Click to collapse
It checks md5 on nandroid....but how is your recovery supposed to know the correct md5 of an online download...cmon bro...don't get heated...just makes you look bad..
All an md5 is is numbers...and it checks it, yes. But unless its a nandroid backup it has nothing to compare those numbers too..
On that not...I'm using the 722 radio on miui with no problems.
Sent from my Incredible 2 using xda premium
722 radio is not the problem, it works fine with earlier builds.
Sent from my ADR6400L
SikYou said:
722 radio is not the problem, it works fine with earlier builds.
Sent from my ADR6400L
Click to expand...
Click to collapse
Yea I've ran it on 3 diff roms since it was released
Sent from my Incredible 2 using xda premium
PLEASE READ OTHER POSTS BEFORE ASKING YOUR QUESTION!
CyanogenMod 12 for LG G2 Family (D800, D801, D802, LS980, VS980)
(L01F, D803, and F320 will eventually be supported)
CyanogenMod 12 is here for the LG G2 Family!!
cyanogen said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
What works (as of November 17):
Camera
WiFi
RIL
NFC (on all EXCEPT the LS980, I'm testing a fix)
Notification lights
Display
All accelometers/sensors
Google Apps
Most Project Volta related enhancements
All native apps
Most audio
Airplane Mode
Wi-Fi tether
What doesn't work (as of November 17):
Video recording
CM features (yet to be ported)
Data/Mobile Network on LS/VS980 report roaming incorrectly sometimes
GPS for some people
What's different from stock CM sources (as of November 17):
New Qualcomm power HAL (you can get 1% usage in 3 hours if the phone is on idle)
Working NFC (current CM sources don't have it working)
Sources:
Common: http://github.com/lg-devs/android_device_lge_g2-common
Kernel: http://github.com/lg-devs/android_kernel_lge_msm8974
Device Repos are all here: http://github.com/lg-devs/
Sceenshots on the next post
XDA:DevDB Information
LG-Devs CyanogenMod 12 (Unofficial), ROM for the LG G2
Contributors
Rashed97, goldflame09, timpohladthomas, @REV3NT3CH, @Snuzzo, @kkozma, @Drgravy, @MikeCriggs, @arcardinal
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Jellybean Bootloader
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-11-18
Last Updated 2014-12-26
Reserved
Downloads (Device folders):
(will be added to Downloads tab soon)
Google Apps are not included in this ROM. Use the package here for best results:
My Gapps for LP (New build will be uploaded every so often)
Basketbuild Gapps for LP (OLD)
If you want root access, please use SuperSU by Chainfire (download from the Play Store):
D800: https://www.androidfilehost.com/?w=files&flid=21414
D801: https://www.androidfilehost.com/?w=files&flid=21415
D802: https://www.androidfilehost.com/?w=files&flid=21416
D803: https://www.androidfilehost.com/?w=files&flid=21921
F320:https://www.androidfilehost.com/?w=files&flid=22093
LS980: https://www.androidfilehost.com/?w=files&flid=21417
VS980: https://www.androidfilehost.com/?w=files&flid=21418
Please report bugs here: http://goo.gl/forms/iDGATlSjn6 or in the Dev-DB bug reporter (preferably in the Google form)
Reserved
Installation Instructions:
Installation Instructions:
1. Boot into latest recovery
2. Wipe everything, even your butt (that includes data, cache, system)
3. Flash
4. Flash Google Apps (if you so choose)
5. Flash SuperSU
6. Reboot
7. Report bugs to us so we can fix them
Make sure you are using the zv8 bootloader on the LS980.
Make sure you are using the 12b bootloader on the VS980. If you need it, follow the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=2451426
The best recoveries for use with this ROM are:
TWRP: 2.8.1.1 or greater http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
CWM: 6.0.5.2 or greater
PhilZ: 6.0.4.8
If you lose access to you SD card (known to occasionally happen on the LS980) follow these commands:
Connect your phone to your PC with ADB enabled
Code:
adb shell
su
restorecon -FR /data/media/0
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ:
Why does it say that I am resources are busy or in use?
I've unmounted (and tried mounting) /system and /data
Click to expand...
Click to collapse
Recovery says this because the script tells it to mount system and data even though they get mounted automatically. Therefore when it tries to mount it and it is already mounted, it gives you that warning. Its NOT an error. Just let it finish and it finishes successfully, then you should be all set.
How would I go about rooting the rom in its current state?
Click to expand...
Click to collapse
Download the SuperSu Beta from here: http://download.chainfire.eu/627/SuperSU/BETA-SuperSU-v2.25.zip
STEP FOR THOSE WITHOUT SDCARD ACCESS IN ROM:
Boot into recovery and adb push the zip
--------------------------------------------------------------
Boot into recovery and flash
Reboot and profit!
Where is the ROM for F320K
Click to expand...
Click to collapse
Not built yet as it also has no trees even supported by CM yet. You are going to have to wait.
NFC has a constant FC. How to fix?
Click to expand...
Click to collapse
Boot into recoveru
click mount
mount system
click file manager
navigate to system/app/Nfc
click select current folder
delete
boot and profit
Will add more as I see them come up!
Gamsahabnida! (that means thanks [in advance], btw)
I've never doubted you guys. I think.
Maybe I did while I was dreaming. I forgot.
nalanotae said:
1st
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
too l8
someone already called first
@nigglenuts [MENTION=4082545]nalanotae
Great Dev thread posts ladies.
@ every one that worked on it to get it going many thanks.
Even after broken builds were posted, you guys kept at it, and I and I'm sure everyone else here is very greatful.
Thanks
Eagerly Waiting for the F320 Support
Was going to test but can't find download links and I'm on official kit Kat baseband. ?
Sent from my LG-D801 using Tapatalk
Can't wait to DL and test when available. Great job.
Download links are live on the second post
Huge thanks to all involved!!! You guys are my hero!!!
Can you port to Droid 1?! XD
Sent from my LG-D801 using Tapatalk
downloading now for d801, will report. wish me luck
Thank You ! (D800)
Does this have thermal control? I have already sent this phone back 2 times for the infamous black lines.
beeree7 said:
Does this have thermal control? I have already sent this phone back 2 times for the infamous black lines.
Click to expand...
Click to collapse
Its the one from cm11, so if you could use cm before without problems then you should be ok
Everyone make sure to wipe your butts too! Nobody likes an itchy butt.
Also, just wanna say, these guys have been a pleasure to work with and the fun doesnt stop here! Lg-Devs is in the process of taking over the world! Let's do this!
Thanks for all the support guys! ::subscribed::
Sent from my LG-VS980
So its based off cm11? So can you use furnace kernel or another cm 11 kernel with the thermal that saved my butt before?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13 builds for jfltexx (GT-I9505). The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Installed SuperSU
Modified system files
Installation
First time flashing CyanogenMod 13 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Useful links
Unofficial jfltexx changelog
CyanogenMod Wiki jfltexx
Jira issue tracker - don't report bugs for nightly builds!
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog
Downloads
CyanogenMod:
Nightlies: http://get.cm/?device=jfltexx
Google Apps:
OpenGApps (choose ARM, 6.0, nano)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Official CyanogenMod 13 for the Galaxy S4 I9505, ROM for the Samsung Galaxy S 4
Contributors
AntaresOne
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2015-12-30
Last Updated 2016-01-08
Review
Thanks a lot to @shark jungle
Yeyaaaa
Finally! I'm going to test it.
Finally... original CM13
Sent from my GT-I9505 using Tapatalk
Nice to see you again here (s4) Mattia will try in next days
AntaresOne: the reason why i'll be keeping my s4 two more years, at least.
Grazzie Mile
AntaresOne said:
Antares
Click to expand...
Click to collapse
Really glad we have s4 original cm13, thank you very much. I've just a problem, as with every other MM build: my wifi disconnects every time i turn off my phone screen. I set the wifi to never turn off, i disabled the avoid poor connection thing, tried changing to a static type conection or to set to 2.4 or 5 ghz only but no results... did you know this problem? and if yes, any hint to give at me? (and to all other members with this problem?) thank you in advance.
Bugs: Calling does not work after a while.
http://forum.xda-developers.com/galaxy-s4/general/jfltexx-moved-to-cm13-t3281971
wow out of all the MM roms ive tried ive never seen this
Corduroysack said:
wow out of all the MM roms ive tried ive never seen this
Click to expand...
Click to collapse
Screen usage?
Great job i can`t belive but the cast screen works wifi works and i think all sensors ! Tnx for this cm13 for s4
Jared20098 said:
Screen usage?
Click to expand...
Click to collapse
lol 7 mins but what im saying i usually set up my device then unplug send some messages make sure whatsapp is running then leave alone for a few hours. My uptime is 2hrs54 since i unplugged and ive never seen this in other MM roms before
It's not to say that usage is going to be any better/longer than other MM roms that will be noted after a few cycles
is bluetooth working?
does this ROM suffer from the deep sleep turning off WIFI issue found on other CM13 roms?
nickmax1 said:
is bluetooth working?
does this ROM suffer from the deep sleep turning off WIFI issue found on other CM13 roms?
Click to expand...
Click to collapse
looks like wifi turning off is fixed, looked at battery info and wifi is solid bar and im still getting whatsapp messages through if that helps
wifi still switches off
Seen this on another thread though if it isn't
http://forum.xda-developers.com/showpost.php?p=64561314&postcount=186
Hey guys,
I tried flashing the CM13 but the new CM recovery doesn't have an option to install from microSD, nor is my microSD detected.
I already wiped the partition as well, and my backup got deleted, yes yes mistake on my part.
How can I go about flashing the ROM onto the phone?
Thanks!
Dirty flashed and get error: "No SIM found" and a lot of FC ...
Will try a clean flash later
EDIT
Clean flash and up running :good:
danasht said:
Hey guys,
I tried flashing the CM13 but the new CM recovery doesn't have an option to install from microSD, nor is my microSD detected.
I already wiped the partition as well, and my backup got deleted, yes yes mistake on my part.
How can I go about flashing the ROM onto the phone?
Thanks!
Click to expand...
Click to collapse
Try TWRP Recovery.
voice call invalid number when i`m 3g/4g if i switch to 2g no problem but in rest it`s ok
... on the quick i found following issue
when DPI is changed via settings some icons (especially dots on sliders) are off-center (see screenshot)
Temp. workaround: additionally change DPI in build.prop to same value
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for Lineage OS is available in the LineageOS Github repo. And if you would like to contribute to Lineage OS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing Lineage OS 13.0 your device?
Coming from a SENSE ROM?
Enable all location services: Settings > Location > (all location services) = On
Coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash LineageOS.
Optional: Install the Google Apps addon package.
Downloads
AFH - https://www.androidfilehost.com/?w=files&flid=137301&sort_by=date&sort_dir=DESC
Root - http://www.supersu.com/download
Changelog - https://www.cmxlog.com/13/
Google Apps - http://opengapps.org/?arch=arm64&api=6.0&variant=nano
Official CM13 support for the Verizon M9? I was already really tempted to drive a few hours to someone for S-OFF. Now I'm really, REALLY tempted. Thanks for this, @Flyhalf205!
That is real nice of you to post this now that my bracket is garbage ?
How is this running so far?
Sent from my HTC One M9 using Tapatalk
Just installed it. Really smooth so far. It has the typical thing were the 3g network is displayed as 3107. So, if I am on a nightly build, how would I perform updates to the ROM. Dirty flash or install the recovery from cyanogen?
Great job.
ROM is running very smooth.
aer0zer0 said:
Just installed it. Really smooth so far. It has the typical thing were the 3g network is displayed as 3107. So, if I am on a nightly build, how would I perform updates to the ROM. Dirty flash or install the recovery from cyanogen?
Click to expand...
Click to collapse
Should be easy fix for next weekend to work on. If you use the built in cm updater it does everything for you. Manual flashing just dirty flash and wipe cache.
Sent from my HTC One M9 using Tapatalk
Just installed 3/22 build and running great so far. Thanks for doing this. As I side note, the CamPack is working. http://forum.xda-developers.com/one-m9/themes-apps/htc-m9-marshmallow-campack-candysix-t3300228
aer0zer0 said:
Just installed it. Really smooth so far. It has the typical thing were the 3g network is displayed as 3107
Click to expand...
Click to collapse
This will be fixed in the next nightly.
OK here's my dilemma. I keep getting Play store FC. I'm using the same gapps that work fine on Candy Rom. Any ideas ? Thanks.
jtommyj said:
OK here's my dilemma. I keep getting Play store FC. I'm using the same gapps that work fine on Candy Rom. Any ideas ? Thanks.
Click to expand...
Click to collapse
try open gapps. It is what I use and no problems here.
Flyhalf205 said:
try open gapps. It is what I use and no problems here.
Click to expand...
Click to collapse
I also had the same issue, I used opengapps nano, latest rev
aer0zer0 said:
I also had the same issue, I used opengapps nano, latest rev
Click to expand...
Click to collapse
I hear PAC ROM has same issue so it looks like a source issue and not gapps
Sent from my HTC6535LVW using Tapatalk
Thanks guys. I'll try open gapps nano then.
jtommyj said:
Thanks guys. I'll try open gapps nano then.
Click to expand...
Click to collapse
It won't help, same issue. I did not word it well
aer0zer0 said:
It won't help, same issue. I did not word it well
Click to expand...
Click to collapse
Yeah I found out lol. Tried the cm 3/28 build also. Something definitely up. I'll keep trying.
jtommyj said:
Yeah I found out lol. Tried the cm 3/28 build also. Something definitely up. I'll keep trying.
Click to expand...
Click to collapse
I flashed a older build and it worked and upgraded to 3/28 and working fine. I think they got it fixed in the 3/29 build for tomorrow.
Flyhalf205 said:
I flashed a older build and it worked and upgraded to 3/28 and working fine. I think they got it fixed in the 3/29 build for tomorrow.
Click to expand...
Click to collapse
OK thanks. I'll give that a shot also !!
Anyone know if the Ir blaster is working yet? I haven't tried cyanogen or candy in about a month and I couldn't get it working even after setting selinux to permissive. That was the fix I used to use for cm12. I think that's the only deal-breaker for me right now.
Hey, installed cm on my m9 two nights ago, really like it so far. I did get a sleep of death twice last night though, thought you should know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 14
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This works only on I337M and i9505 with TWRP JFLTEATT recovery link TWRP here
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo . And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review . You can also view the changelog for a full list of changes & features.
Working
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Video Playback
Not Working/Bugs
Camcorder (Works on Google Camera)
Installation
Requires Unlocked Bootloader & a custom recovery
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol + , home and power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip
Reboot
Downloads
cm-14.0-20161029-UNOFFICIAL-jflteatt.zip
Sources
kernel
XDA:DevDB Information
Cyanogenmod, ROM for the AT&T Samsung Galaxy S4
Contributors
kn06497
Source Code: https://github.com/Cyanogenmod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Rooted and TWRP jflteatt Recovery
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2016-10-29
Last Updated 2016-10-29
I am not able to locate the download for the gapps to be used with this ROM. Please provide to the download for the proper gapps for use in this ROM. Thank you.
cm14.1 for JFLTEATT
Link - https://androidfilehost.com/?w=files&flid=126029&sort_by=date&sort_dir=DESC
cm-14.1-20161105-NIGHTLY-jflteatt.zip
Link - https://androidfilehost.com/?fid=312968873555011614
This ROM is just great, no problems so far. Thank you so much for building 7.0!!
Using Canadian branded i337m
Does this work on SGH-i537 (ATT, unlocked currently running 5.01)?
Thanks.
Open GAPPS
monsruzo said:
I am not able to locate the download for the gapps to be used with this ROM. Please provide to the download for the proper gapps for use in this ROM. Thank you.
Click to expand...
Click to collapse
Try Open Gapps via web (http://opengapps.org) or their mobile app.
How would I flash this. I have jltecan and I've read that you are suppose to flash twrp jlteatt which I've tried but I still get the error. What to do to fix this problem??
edit : i got it working. apparently wiping dalvik,cache and system does not factory reset the device. lol i factory reste it and it worked. very smooth for an old phone. it was so laggy on stock but now its very snappy.
I have an S4 running latest stock rom from AT&T ...OK2. I am assuming I cannot do this? other threads are saying we cannot unlock the bootloader.
crisis_trustee said:
cm14.1 for JFLTEATT
Link - https://androidfilehost.com/?w=files&flid=126029&sort_by=date&sort_dir=DESC
cm-14.1-20161105-NIGHTLY-jflteatt.zip
Link - https://androidfilehost.com/?fid=312968873555011614
Click to expand...
Click to collapse
Dope!
Will there be another update or nightly for JFLTEATT, @crisis_trustee or @kno06497?
It's sad there is so little traction on this thread, I would really like this rom to happen since S4's are still more than capable devices. I wish the dev/builder doesn't lose hope and keeps updating this even if it implies longer waiting periods. Thanks for the present efforts anyways. Can anyone update us on bugs with current download? I use this device as my daily driver so I need something usable.
Sent from my SGH-I337 using Tapatalk
Using i337m. Should I be downloading 14.1 or 14.1 Nightly? Or is there much of a difference?
MikeOnX said:
It's sad there is so little traction on this thread, I would really like this rom to happen since S4's are still more than capable devices. I wish the dev/builder doesn't lose hope and keeps updating this even if it implies longer waiting periods. Thanks for the present efforts anyways. Can anyone update us on bugs with current download? I use this device as my daily driver so I need something usable.
Click to expand...
Click to collapse
In case this development or thread is effectively dormant, consider taking a look at OctOS (Nougat 7.1.1) for the S4. http://forum.xda-developers.com/galaxy-s4-att/orig-development/rom-team-octos-oct-n-t3532663/page3
christopherrrg said:
This ROM is just great, no problems so far. Thank you so much for building 7.0!!
Using Canadian branded i337m
Click to expand...
Click to collapse
Can u tell me how to flash on Canadian firmware email me at [email protected]
Thanks
Harsh0786 said:
Can u tell me how to flash on Canadian firmware email me at [email protected]
Thanks
Click to expand...
Click to collapse
Sorry but I've given my s4 to my son a while ago, working with s6 edge.
I just installed it on Canadian brand SGH-i337M (unlocked) everything goes great while flashing but it bootlooped on start and doesn't start after that. Any solutions for that. Plz E-mail me [email protected]
Harsh0786 said:
I just installed it on Canadian brand SGH-i337M (unlocked) everything goes great while flashing but it bootlooped on start and doesn't start after that. Any solutions for that. Plz E-mail me [email protected]
Click to expand...
Click to collapse
You used the nightly build? 14.1
I get an error "this this device is jftlecan" on all of these files when i try to load. Any ideas what I'm missing ?
aces1288 said:
I get an error "this this device is jftlecan" on all of these files when i try to load. Any ideas what I'm missing ?
Click to expand...
Click to collapse
do you have the correct recovery for your device?
Sent from my HTC 10 using Tapatalk
mexicandroid said:
do you have the correct recovery for your device?
I hope so,, lol
I am using CWMR v6.0.4.7 should I be using something else ?
Click to expand...
Click to collapse
Nice stable rom
I installed it two days ago on a Rogers phone, only issues that I've noticed are that the WI-FI does not seem to automatically connect to my home network. Second issue was the proximity sensor, had to download a dialer apk. Here is the one I used //drive.google.com/file/d/0B3gC6ZOFEXSZNE1SR2dManJPbGc/view?usp=drivesdk
VOIP apps like hangouts still black out screen when on Audio calls, with the life proof case on. Without the case the sensor seems to function properly, Except...
Issue is none of the buttons will wake the screen.
This is why I replaced the dialer for the regular phone.