[ROM][6.0.1][UNOFFICIAL] LineageOS 13.0

[ROM][6.0.1][UNOFFICIAL] LineageOS 13.0 - Verizon HTC One (M9)

Official CM13 support for the Verizon M9? I was already really tempted to drive a few hours to someone for S-OFF. Now I'm really, REALLY tempted. Thanks for this, @Flyhalf205!

That is real nice of you to post this now that my bracket is garbage ?

How is this running so far?
Sent from my HTC One M9 using Tapatalk

Just installed it. Really smooth so far. It has the typical thing were the 3g network is displayed as 3107. So, if I am on a nightly build, how would I perform updates to the ROM. Dirty flash or install the recovery from cyanogen?

Great job.
ROM is running very smooth.

aer0zer0 said:
Just installed it. Really smooth so far. It has the typical thing were the 3g network is displayed as 3107. So, if I am on a nightly build, how would I perform updates to the ROM. Dirty flash or install the recovery from cyanogen?
Click to expand...
Click to collapse
Should be easy fix for next weekend to work on. If you use the built in cm updater it does everything for you. Manual flashing just dirty flash and wipe cache.
Sent from my HTC One M9 using Tapatalk

Just installed 3/22 build and running great so far. Thanks for doing this. As I side note, the CamPack is working. http://forum.xda-developers.com/one-m9/themes-apps/htc-m9-marshmallow-campack-candysix-t3300228

aer0zer0 said:
Just installed it. Really smooth so far. It has the typical thing were the 3g network is displayed as 3107
Click to expand...
Click to collapse
This will be fixed in the next nightly.

OK here's my dilemma. I keep getting Play store FC. I'm using the same gapps that work fine on Candy Rom. Any ideas ? Thanks.

jtommyj said:
OK here's my dilemma. I keep getting Play store FC. I'm using the same gapps that work fine on Candy Rom. Any ideas ? Thanks.
Click to expand...
Click to collapse
try open gapps. It is what I use and no problems here.

Flyhalf205 said:
try open gapps. It is what I use and no problems here.
Click to expand...
Click to collapse
I also had the same issue, I used opengapps nano, latest rev

aer0zer0 said:
I also had the same issue, I used opengapps nano, latest rev
Click to expand...
Click to collapse
I hear PAC ROM has same issue so it looks like a source issue and not gapps
Sent from my HTC6535LVW using Tapatalk

Thanks guys. I'll try open gapps nano then.

jtommyj said:
Thanks guys. I'll try open gapps nano then.
Click to expand...
Click to collapse
It won't help, same issue. I did not word it well

aer0zer0 said:
It won't help, same issue. I did not word it well
Click to expand...
Click to collapse
Yeah I found out lol. Tried the cm 3/28 build also. Something definitely up. I'll keep trying.

jtommyj said:
Yeah I found out lol. Tried the cm 3/28 build also. Something definitely up. I'll keep trying.
Click to expand...
Click to collapse
I flashed a older build and it worked and upgraded to 3/28 and working fine. I think they got it fixed in the 3/29 build for tomorrow.

Flyhalf205 said:
I flashed a older build and it worked and upgraded to 3/28 and working fine. I think they got it fixed in the 3/29 build for tomorrow.
Click to expand...
Click to collapse
OK thanks. I'll give that a shot also !!

Anyone know if the Ir blaster is working yet? I haven't tried cyanogen or candy in about a month and I couldn't get it working even after setting selinux to permissive. That was the fix I used to use for cm12. I think that's the only deal-breaker for me right now.

Hey, installed cm on my m9 two nights ago, really like it so far. I did get a sleep of death twice last night though, thought you should know.

Related

[ROM][6.0.1][OFFICIAL] CyanogenMod 13

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13 builds for jfltexx (GT-I9505). The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Installed SuperSU
Modified system files
Installation
First time flashing CyanogenMod 13 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Useful links
Unofficial jfltexx changelog
CyanogenMod Wiki jfltexx
Jira issue tracker - don't report bugs for nightly builds!
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog
Downloads
CyanogenMod:
Nightlies: http://get.cm/?device=jfltexx
Google Apps:
OpenGApps (choose ARM, 6.0, nano)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Official CyanogenMod 13 for the Galaxy S4 I9505, ROM for the Samsung Galaxy S 4
Contributors
AntaresOne
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2015-12-30
Last Updated 2016-01-08

Review
Thanks a lot to @shark jungle

Yeyaaaa

Finally! I'm going to test it.

Finally... original CM13
Sent from my GT-I9505 using Tapatalk

Nice to see you again here (s4) Mattia will try in next days

AntaresOne: the reason why i'll be keeping my s4 two more years, at least.
Grazzie Mile

AntaresOne said:
Antares
Click to expand...
Click to collapse
Really glad we have s4 original cm13, thank you very much. I've just a problem, as with every other MM build: my wifi disconnects every time i turn off my phone screen. I set the wifi to never turn off, i disabled the avoid poor connection thing, tried changing to a static type conection or to set to 2.4 or 5 ghz only but no results... did you know this problem? and if yes, any hint to give at me? (and to all other members with this problem?) thank you in advance.

Bugs: Calling does not work after a while.
http://forum.xda-developers.com/galaxy-s4/general/jfltexx-moved-to-cm13-t3281971

wow out of all the MM roms ive tried ive never seen this

Corduroysack said:
wow out of all the MM roms ive tried ive never seen this
Click to expand...
Click to collapse
Screen usage?

Great job i can`t belive but the cast screen works wifi works and i think all sensors ! Tnx for this cm13 for s4

Jared20098 said:
Screen usage?
Click to expand...
Click to collapse
lol 7 mins but what im saying i usually set up my device then unplug send some messages make sure whatsapp is running then leave alone for a few hours. My uptime is 2hrs54 since i unplugged and ive never seen this in other MM roms before
It's not to say that usage is going to be any better/longer than other MM roms that will be noted after a few cycles

is bluetooth working?
does this ROM suffer from the deep sleep turning off WIFI issue found on other CM13 roms?

nickmax1 said:
is bluetooth working?
does this ROM suffer from the deep sleep turning off WIFI issue found on other CM13 roms?
Click to expand...
Click to collapse
looks like wifi turning off is fixed, looked at battery info and wifi is solid bar and im still getting whatsapp messages through if that helps
wifi still switches off
Seen this on another thread though if it isn't
http://forum.xda-developers.com/showpost.php?p=64561314&postcount=186

Hey guys,
I tried flashing the CM13 but the new CM recovery doesn't have an option to install from microSD, nor is my microSD detected.
I already wiped the partition as well, and my backup got deleted, yes yes mistake on my part.
How can I go about flashing the ROM onto the phone?
Thanks!

Dirty flashed and get error: "No SIM found" and a lot of FC ...
Will try a clean flash later
EDIT
Clean flash and up running :good:

danasht said:
Hey guys,
I tried flashing the CM13 but the new CM recovery doesn't have an option to install from microSD, nor is my microSD detected.
I already wiped the partition as well, and my backup got deleted, yes yes mistake on my part.
How can I go about flashing the ROM onto the phone?
Thanks!
Click to expand...
Click to collapse
Try TWRP Recovery.

voice call invalid number when i`m 3g/4g if i switch to 2g no problem but in rest it`s ok

... on the quick i found following issue
when DPI is changed via settings some icons (especially dots on sliders) are off-center (see screenshot)
Temp. workaround: additionally change DPI in build.prop to same value

[ROM] [2016/12/17] CyanogenMod 12.1

Changelogs
Last build :
Cleaned a lot of unneded stuff
Fixed camera
Fixed battery drain
Fixed video recording
Fixed a lot of other things that I don't remember now

Info
Screenshoots
Reviews
Requests
Report bugs

Thanks for your contribution on the CM12.1 ROM building of Redmi note2
Will find some time later and try it. I have one question: Will this ROM be updated and synchronized routinely if there is change in cyanogenmod website ?

Kris Chen said:
Thanks for your contribution on the CM12.1 ROM building of Redmi note2
Will find some time later and try it. I have one question: Will this ROM be updated and synchronized routinely if there is change in cyanogenmod website ?
Click to expand...
Click to collapse
Yes, whenever I have time

I've tried to dl it ~~11 times, just to check it out, but sadly seems dl is broken.

sikica133 said:
I've tried to dl it ~~11 times, just to check it out, but sadly seems dl is broken.
Click to expand...
Click to collapse
Sorry, new download link: https://www.androidfilehost.com/?fid=24407100847293668
you can check my website for last releases, also redirect to filehost link

danielpinto8zz6 said:
Sorry, new download link: https://www.androidfilehost.com/?fid=24407100847293668
you can check my website for last releases, also redirect to filehost link
Click to expand...
Click to collapse
naah, dw, was just a heads up, you dont have to apologize for anything lol, you're the one providing us with smth to play with

What's the difference between your CM and others ?

Hi. Thank you for your effort for developing ROM for this phone. I appreciate it.
But here on xda is another Cyanogenmod ROM: http://forum.xda-developers.com/redmi-note-2/orig-development/rom-redmi-note-2-t3272872
What is difference? If no difference is between them, could you join to development the second ROM?

Hi, there are no diference, the difference is that this cm is sync with last source, my point is bring up daily builds to you guys
I am working on others ROMs like crdroid and temasek, stay connected

emajko159 said:
Hi. Thank you for your effort for developing ROM for this phone. I appreciate it.
But here on xda is another Cyanogenmod ROM: http://forum.xda-developers.com/redmi-note-2/orig-development/rom-redmi-note-2-t3272872
What is difference? If no difference is between them, could you join to development the second ROM?
Click to expand...
Click to collapse
Jian help me a lot to build this ROM, he dont have server for build this days, so I will update cm, maybe OTA updates soon

Still not working Bluetooth with car?

jcabad said:
Still not working Bluetooth with car?
Click to expand...
Click to collapse
probably yes, I don't use, so I don't know :s

danielpinto8zz6 said:
Jian help me a lot to build this ROM, he dont have server for build this days, so I will update cm, maybe OTA updates soon
Click to expand...
Click to collapse
Hmm... OTA seems legit. Something lacks in CM world if u mean it's a true OTA not a CM delta which a waste.
We just need a correct download size synchronized with only whatever changes.

jcabad said:
Still not working Bluetooth with car?
Click to expand...
Click to collapse
Bluetooth works for me. I can call and media streaming with no problem in my car. Only one problem with bluetooth I have that contacts sync does not work over bluetooth.

FC's on messaging & browser, clean flash, with and without gapps. baseband issue?

sikica133 said:
FC's on messaging & browser, clean flash, with and without gapps. baseband issue?
Click to expand...
Click to collapse
I don't have that problem, but install opengapps aroma version and use messenger and chrome, I will update

switched back to 7.1.1.0 stable, then reflashed this and everything is fine. guess you wont be able to flash it over newer miui builds

sikica133 said:
switched back to 7.1.1.0 stable, then reflashed this and everything is fine. guess you wont be able to flash it over newer miui builds
Click to expand...
Click to collapse
Humm I will take a look

[ROM][7.0.][ALPHA][UNOFFICIAL][seed][Qualcomm] CM 14.0 for Android One 2nd Gen

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 14
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Note: This is for the Qualcomm (MSM8916) variant only. This will not work on the Mediatek version and should not, for any reason, be installed on Mediatek devices.
What's Broken
Video and audio recording
Eleven Music Player (VLC tested working) Eleven Music player is fixed
Download: https://www.androidfilehost.com/?fid=457095661767104161
Note: This is an Alpha build. Most CyanogenMod features and apps are still not available.
Sources
Device Tree
Kernel
Vendor
XDA:DevDB Information
CyanogenMod 14 ROM for Android One Seed, ROM for the OEM Cross Device Development
Contributors
arvinquilao
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader, Official TWRP 3.0.2-1
Version Information
Status: Alpha
Created 2016-09-16
Last Updated 2016-09-15

Reserved

Reserved

Yes!! Finally thank you @arvinquilao will test it now. Does this require new Gapps 7.0 or something?

I can' t get past the setup wizard, I flashed Gapps 7.0 (32-bit??) and after the "Turn on cellular data" page it goes next to where you log-in using your google account, I then get the "Google Play Services keeps stopping".

Janjako16 said:
I can' t get past the setup wizard, I flashed Gapps 7.0 (32-bit??) and after the "Turn on cellular data" page it goes next to where you log-in using your google account, I then get the "Google Play Services keeps stopping".
Click to expand...
Click to collapse
I didn't have that issue when I used Pico version. Anyway, bugs like that are expected during these early stages.

Alpha 1.1 uploaded
- FM Radio added
- Music player fixed

Looks promising. So far so good, no unforced reboot experienced. Keep 'em comin'.....

arvinquilao said:
Alpha 1.1 uploaded
- FM Radio added
- Music player fixed
Click to expand...
Click to collapse
can i port your work to lenovo A6000...?

Is this ROM 32-bit or 64-bit? Still having problems using gapps

Janjako16 said:
Is this ROM 32-bit or 64-bit? Still having problems using gapps
Click to expand...
Click to collapse
certainly 32-bit; i used opengapps 32-bit nano file. no major problems, except for some bugs unrelated to gapps.

ondoy1943 said:
certainly 32-bit; i used opengapps 32-bit nano file. no major problems, except for some bugs unrelated to gapps.
Click to expand...
Click to collapse
Thanks I just had to use pico instead of stock because it gives me google play error.

New build uploaded: https://www.androidfilehost.com/?fid=529152257862665150

Hey. I hate to ask but can you upload a flashable zip that's not locked to seed devices. As I'm using a Crackling device (GM4G Clone) and the first upload worked fine bugs aside.
Thanks
Joe

using this as my daily driver. pretty good so far!

Hi there!
First of all, thank you so much for your work!
But mobile data isn't working(at least for me). In the settings app, I always get the notification(screenshot attached to this post) that my data is turned off even if it's not. Once this is fixed, it'll work just fine as a daily driver.
Greetings!
EDIT: nvm, I just saw that my SIM wasn't set to use data automatically like it does with other ROMs. Sorry for bothering you.

can anyone please outline here the step by step procedure on how to root the CM android one g1? is there a root toolkit for the android one g1?
thank you.

X22Inc said:
Hey. I hate to ask but can you upload a flashable zip that's not locked to seed devices. As I'm using a Crackling device (GM4G Clone) and the first upload worked fine bugs aside.
Thanks
Joe
Click to expand...
Click to collapse
I'll look into that. In the meantime, please test if seed's official recovery can flash the zip: https://dl.twrp.me/seed/ (test both)

arvinquilao said:
I'll look into that. In the meantime, please test if seed's official recovery can flash the zip: https://dl.twrp.me/seed/ (test both)
Click to expand...
Click to collapse
Hi, thanks that worked.
And the ROM works great, aside from 720p60 (haven't tried 720p yet) playback in YouTube which is freezing.
All in, it's a very stable.

X22Inc said:
Hi, thanks that worked.
And the ROM works great, aside from 720p60 (haven't tried 720p yet) playback in YouTube which is freezing.
All in, it's a very stable.
Click to expand...
Click to collapse
It didn't work for me. I'm also using a Crackling device.

[ROM] Cyanogenmod 14.0 [7.0.1] S4 i9505 - i337M [UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 14
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This works only on I337M and i9505 with TWRP JFLTEATT recovery link TWRP here
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo . And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review . You can also view the changelog for a full list of changes & features.
Working
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Video Playback
Not Working/Bugs
Camcorder (Works on Google Camera)
Installation
Requires Unlocked Bootloader & a custom recovery
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol + , home and power)
Wipe Data/Factory Reset
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip
Reboot
Downloads
cm-14.0-20161029-UNOFFICIAL-jflteatt.zip

Sources
kernel
XDA:DevDB Information
Cyanogenmod, ROM for the AT&T Samsung Galaxy S4
Contributors
kn06497
Source Code: https://github.com/Cyanogenmod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Rooted and TWRP jflteatt Recovery
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2016-10-29
Last Updated 2016-10-29

I am not able to locate the download for the gapps to be used with this ROM. Please provide to the download for the proper gapps for use in this ROM. Thank you.

cm14.1 for JFLTEATT
Link - https://androidfilehost.com/?w=files&flid=126029&sort_by=date&sort_dir=DESC
cm-14.1-20161105-NIGHTLY-jflteatt.zip
Link - https://androidfilehost.com/?fid=312968873555011614

This ROM is just great, no problems so far. Thank you so much for building 7.0!!
Using Canadian branded i337m

Does this work on SGH-i537 (ATT, unlocked currently running 5.01)?
Thanks.

Open GAPPS
monsruzo said:
I am not able to locate the download for the gapps to be used with this ROM. Please provide to the download for the proper gapps for use in this ROM. Thank you.
Click to expand...
Click to collapse
Try Open Gapps via web (http://opengapps.org) or their mobile app.

How would I flash this. I have jltecan and I've read that you are suppose to flash twrp jlteatt which I've tried but I still get the error. What to do to fix this problem??
edit : i got it working. apparently wiping dalvik,cache and system does not factory reset the device. lol i factory reste it and it worked. very smooth for an old phone. it was so laggy on stock but now its very snappy.

I have an S4 running latest stock rom from AT&T ...OK2. I am assuming I cannot do this? other threads are saying we cannot unlock the bootloader.

crisis_trustee said:
cm14.1 for JFLTEATT
Link - https://androidfilehost.com/?w=files&flid=126029&sort_by=date&sort_dir=DESC
cm-14.1-20161105-NIGHTLY-jflteatt.zip
Link - https://androidfilehost.com/?fid=312968873555011614
Click to expand...
Click to collapse
Dope!
Will there be another update or nightly for JFLTEATT, @crisis_trustee or @kno06497?

It's sad there is so little traction on this thread, I would really like this rom to happen since S4's are still more than capable devices. I wish the dev/builder doesn't lose hope and keeps updating this even if it implies longer waiting periods. Thanks for the present efforts anyways. Can anyone update us on bugs with current download? I use this device as my daily driver so I need something usable.
Sent from my SGH-I337 using Tapatalk

Using i337m. Should I be downloading 14.1 or 14.1 Nightly? Or is there much of a difference?

MikeOnX said:
It's sad there is so little traction on this thread, I would really like this rom to happen since S4's are still more than capable devices. I wish the dev/builder doesn't lose hope and keeps updating this even if it implies longer waiting periods. Thanks for the present efforts anyways. Can anyone update us on bugs with current download? I use this device as my daily driver so I need something usable.
Click to expand...
Click to collapse
In case this development or thread is effectively dormant, consider taking a look at OctOS (Nougat 7.1.1) for the S4. http://forum.xda-developers.com/galaxy-s4-att/orig-development/rom-team-octos-oct-n-t3532663/page3

christopherrrg said:
This ROM is just great, no problems so far. Thank you so much for building 7.0!!
Using Canadian branded i337m
Click to expand...
Click to collapse
Can u tell me how to flash on Canadian firmware email me at [email protected]
Thanks

Harsh0786 said:
Can u tell me how to flash on Canadian firmware email me at [email protected]
Thanks
Click to expand...
Click to collapse
Sorry but I've given my s4 to my son a while ago, working with s6 edge.

I just installed it on Canadian brand SGH-i337M (unlocked) everything goes great while flashing but it bootlooped on start and doesn't start after that. Any solutions for that. Plz E-mail me [email protected]

Harsh0786 said:
I just installed it on Canadian brand SGH-i337M (unlocked) everything goes great while flashing but it bootlooped on start and doesn't start after that. Any solutions for that. Plz E-mail me [email protected]
Click to expand...
Click to collapse
You used the nightly build? 14.1

I get an error "this this device is jftlecan" on all of these files when i try to load. Any ideas what I'm missing ?

aces1288 said:
I get an error "this this device is jftlecan" on all of these files when i try to load. Any ideas what I'm missing ?
Click to expand...
Click to collapse
do you have the correct recovery for your device?
Sent from my HTC 10 using Tapatalk

mexicandroid said:
do you have the correct recovery for your device?
I hope so,, lol
I am using CWMR v6.0.4.7 should I be using something else ?
Click to expand...
Click to collapse

Nice stable rom
I installed it two days ago on a Rogers phone, only issues that I've noticed are that the WI-FI does not seem to automatically connect to my home network. Second issue was the proximity sensor, had to download a dialer apk. Here is the one I used //drive.google.com/file/d/0B3gC6ZOFEXSZNE1SR2dManJPbGc/view?usp=drivesdk
VOIP apps like hangouts still black out screen when on Audio calls, with the life proof case on. Without the case the sensor seems to function properly, Except...
Issue is none of the buttons will wake the screen.
This is why I replaced the dialer for the regular phone.

[ROM][Flounder][7.1.2][UNOFFICIAL] LineageOS 14.1 for Nexus 9 (5/28/2019)

LineageOS 14.1 is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
LineageOS 14.1 is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS 14.1 is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Bug reporting:
Before the report make sure that you've installed the latest build of the ROM.
Explain the bug in details and, if possible, methods to reproduce it.
For most issues, you should attach the logcat.
Random reboots? Please upload last_kmsg immediately after the kernel crash.
Note: I will only be providing builds once every month and when new security patches come in. I don't have enough time to be making them every week. These builds should be daily driver friendly and have nothing changed or added and they should be pure lineage based builds. Please download the latest version of OpenGapps and flash along with the ROM to be able to use the play store and other google related services. If you want to root i recommend flashing and using Magisk 19.2. Enjoy and i hope you appreciate my pure lineage 14.1 Unofficial builds for the HTC Nexus 9 Flounder!
Downloads:
Latest 5/28 build for Flounder is here: https://www.androidfilehost.com/?fid=6006931924117888576
Download folder for Flounder is here: https://www.androidfilehost.com/?w=files&flid=295098
Sources:
Device Tree: https://github.com/LineageOS/android_device_htc_flounder/tree/cm-14.1
Vendor Tree: https://github.com/TheMuppets/proprietary_vendor_htc/tree/cm-14.1/flounder
Kernel Tree #1: https://github.com/LineageOS/android_kernel_google_msm/tree/cm-14.1
Kernel Tree #2: https://github.com/LineageOS/android_kernel_htc_flounder/tree/cm-14.1
Manifests Tree: https://github.com/JT1510365/local_manifests/blob/cm-14.1/flounder.xml

reserved for future use

Screenshots

More screenshots

uh, What's with the default display DPI, it's too big

ChristopherXI said:
uh, What's with the default display DPI, it's too big
Click to expand...
Click to collapse
Hey sorry my apologies I set it to 480 DPI in build prop by default because I like the bigger display rather than the tiny display elements. You can flash this zip here along with the ROM and it will return your nexus 9 to the stock 320 DPI instead of the bigger one which was 480 DPI. Do a full wipe of the rom again and then flash the zip with the fix and you should be good to go
Flash in recovery
https://www.androidfilehost.com/?fid=6006931924117889115
Cheers!

JT1510365 said:
Hey sorry my apologies I set it to 480 DPI in build prop by default because I like the bigger display rather than the tiny display elements. You can flash this zip here along with the ROM and it will return your nexus 9 to the stock 320 DPI instead of the bigger one which was 480 DPI. Do a full wipe of the rom again and then flash the zip with the fix and you should be good to go
Flash in recovery
https://www.androidfilehost.com/?fid=6006931924117889115
Cheers!
Click to expand...
Click to collapse
Oh no worries I'm fully capable of changing the DPI back on my own. Thanks for files tho

Any chance you can build one for the LTE version?

will these files also work for nexus 9 LTE as well or not. need to know before flashing your builds.

mrk2815 said:
will these files also work for nexus 9 LTE as well or not. need to know before flashing your builds.
Click to expand...
Click to collapse
It will work but you will lose cell network service and LTE you will only be able to use wifi

StarKilLer-MOK said:
Any chance you can build one for the LTE version?
Click to expand...
Click to collapse
Yes I will since you asked for it I will try to get it uploaded tonight or tomorrow

Hello,
Tried to install this build yesterday and failed to do so. Whenever I try to install it installs successfully and when i reboot to system, google logo will appear and nothing happens. Using latest version of opengapps7.1arm64. Any help will be appreciated. Thanks in advance.

saiBhagavan said:
Hello,
Tried to install this build yesterday and failed to do so. Whenever I try to install it installs successfully and when i reboot to system, google logo will appear and nothing happens. Using latest version of opengapps7.1arm64. Any help will be appreciated. Thanks in advance.
Click to expand...
Click to collapse
You have to flash latest stock rom with fastboot or you can flash the n9f27m vendor separately it won't boot because your vendor is the wrong version if you need help with flashing vendors please pm me

nexus 9 lte
Hi there.
Can i flash it in my lte nexus?
regards

sandemans said:
Hi there.
Can i flash it in my lte nexus?
regards
Click to expand...
Click to collapse
I don't think so

Are there any rom which work in this tab?
regards
JT1510365 said:
I don't think so
Click to expand...
Click to collapse

JT1510365 said:
Yes I will since you asked for it I will try to get it uploaded tonight or tomorrow
Click to expand...
Click to collapse
Hi,
Were you able to build one for LTE ?
If so please share the link to the Download ...
thanks.

JT1510365 said:
It will work but you will lose cell network service and LTE you will only be able to use wifi
Click to expand...
Click to collapse
This should answer your question.

Develop Bugs

welcome