Hi guys , after installation rom custom i9505 I've install the root all as expected. Now I completely lost sound from the speakers . What can be my problem , ? Now I'm with official m919 (t-mobile) .
Bill06 said:
Hi guys , after installation rom custom i9500 I've install the root all as expected. Now I completely lost sound from the speakers . What can be my problem , ? Now I'm with official m919 (t-mobile) .
Click to expand...
Click to collapse
I9505 or I9500. because we can only install roms from the i9505. if you happened to install i9500 rom, your lucky your not bricked. Also, if you went completely back to official stock and sound still doesnt work, your probably screwed. Of course this is assuming you flashed a i9500 rom like you said, not a i9505.
if you dont know which you flashed, post a link to the rom
TheAtheistOtaku said:
I9505 or I9500. because we can only install roms from the i9505. if you happened to install i9500 rom, your lucky your not bricked. Also, if you went completely back to official stock and sound still doesnt work, your probably screwed. Of course this is assuming you flashed a i9500 rom like you said, not a i9505.
if you dont know which you flashed, post a link to the rom
Click to expand...
Click to collapse
Sorry it was an error I install i9505 rom
Bill06 said:
Sorry it was an error I install i9505 rom
Click to expand...
Click to collapse
ah, well im assuming you just flashed a stock rom, and didnt use odin to go completely stock without root or custom recovery. you should do that, theres an odin tar floating around in the forums somewhere you can use. of course by doing this you will have to root your device again.
TheAtheistOtaku said:
ah, well im assuming you just flashed a stock rom, and didnt use odin to go completely stock without root or custom recovery. you should do that, theres an odin tar floating around in the forums somewhere you can use. of course by doing this you will have to root your device again.
Click to expand...
Click to collapse
I did that 5 times it doesn't work
Bill06 said:
I did that 5 times it doesn't work
Click to expand...
Click to collapse
hmm well its either a hardware problem or some other problem im not familiar with or thinking of right now. got me stumped
TheAtheistOtaku said:
hmm well its either a hardware problem or some other problem im not familiar with or thinking of right now. got me stumped
Click to expand...
Click to collapse
when playing a video ,phone starts to hang, i don't think is really hardware problem
Questions and Help issues go in Q&A and help section
Thread moved
Thanks
FNM
Hi.I have a similar problem and I was not able to solve it, though, and asked the question here. Phone works fine, gps, internet, photo, plays video but no sound. If you just burned speaker headphones could work, but the phone just starts to hang when playing audio and call. Which module is responsible for the sound? Worth Stock Firmware
Hello, is there a 4 firmware file (service) for our ΠΌ919?I updated the (recovery) at its Mac through Kies, the sound still does not appear
Related
I had previously tried to root my phone and decided to flash it back to factory. I downloaded last nights OTA 4.3 update and after it installed, now my ATT S3 SGHi1747 gets stuck at the ATT logo AFTER the Samsung logo appears then disappears. My pc is no longer recognizing the device nor do I know how to get in there to at least get it up and running to try and flash it back to factory THEN download 4.3.
Any suggestions on how to get this fixed would be appreciated!
'Sider said:
I had previously tried to root my phone and decided to flash it back to factory. I downloaded last nights OTA 4.3 update and after it installed, now my ATT S3 SGHi1747 gets stuck at the ATT logo AFTER the Samsung logo appears then disappears. My pc is no longer recognizing the device nor do I know how to get in there to at least get it up and running to try and flash it back to factory THEN download 4.3.
Any suggestions on how to get this fixed would be appreciated!
Click to expand...
Click to collapse
ODIN back to stock.
Question
Did you try using ODIN or did you find a factory ROM to flash?
'Sider said:
I had previously tried to root my phone and decided to flash it back to factory. I downloaded last nights OTA 4.3 update and after it installed, now my ATT S3 SGHi1747 gets stuck at the ATT logo AFTER the Samsung logo appears then disappears. My pc is no longer recognizing the device nor do I know how to get in there to at least get it up and running to try and flash it back to factory THEN download 4.3.
Any suggestions on how to get this fixed would be appreciated!
Click to expand...
Click to collapse
Try booting into recovery and factory resetting, this usually fixes this problem.
polobunny said:
ODIN back to stock.
Click to expand...
Click to collapse
Downloaded ODIN, still a little fuzzy on how to operate it
Cadle said:
Did you try using ODIN or did you find a factory ROM to flash?
Click to expand...
Click to collapse
Im not too tech savvy obviously lol, can you point me in the direction of a factory ROM
dntesinfrno said:
Try booting into recovery and factory resetting, this usually fixes this problem.
Click to expand...
Click to collapse
Tried this twice, no luck.
Im assuming once I get this thing flashed back, I can download that app that will reset the counter?
'Sider said:
Downloaded ODIN, still a little fuzzy on how to operate it
Click to expand...
Click to collapse
If you google for "odin flash rom" there's lot of good tutorials out there, many on this forum alone. As for stock, i'm not sure where to find it since I flashed custom the day after I got my phone and never looked back...can't stand stock touchwiz. You could also try flashing any custom ROM you happen to have layin around...worth a shot until you find a custom one. I use BeanStalk ROM, which has 4.3 and 4.4 versions out now.
Best of luck to ya!
goombah88 said:
If you google for "odin flash rom" there's lot of good tutorials out there, many on this forum alone. As for stock, i'm not sure where to find it since I flashed custom the day after I got my phone and never looked back...can't stand stock touchwiz. You could also try flashing any custom ROM you happen to have layin around...worth a shot until you find a custom one. I use BeanStalk ROM, which has 4.3 and 4.4 versions out now.
Best of luck to ya!
Click to expand...
Click to collapse
I suggest here that everyone here read some of the other threads here on XDA, and see all the problems people are having flashing and rooting after taking this latest 4.3 OTA before advising the next person on how to make ANOTHER paper weight.
As for Sider,
You might be out of luck here, as there is no official 4.3 firmware yet available to flash back to stock, and also AT&T has done something with the new software update, where trying to downgrade it back to a previous version is going to either fail or brick phones.
Also, I haven't read yet where anyone has been successful flashing a custom recovery to fix any issues, but the posts are going up so fast right now that I might have easily missed it.
Edit: OK, someone was able to get TWRP installed, but is also having issues with root.
polobunny said:
ODIN back to stock.
Click to expand...
Click to collapse
DO NOT ODIN after last update (OTA 4.3) installed on phone. You will brick your phone.
norbarb said:
DO NOT ODIN after last update (OTA 4.3) installed on phone. You will brick your phone.
Click to expand...
Click to collapse
You're right. I completely forgot about that.
I have been using Cyanogenmod 11 Nightlies for my device for about as long as they have been out, so I know it is still a work in progress, and most of the issues I have faced have gone away as newer nightly builds have been released, so I have not reported any issues as of yet.
Within the last month or so, I have noticed a new issue. The mobile data has been randomly cutting out, allowing only emergency phone calls. It only goes out for about a minute or two, but it is still a huge inconvenience. It seems to happen randomly, except after I finish a phone call -- it almost always cuts out immediately after (very frustrating for when calls are dropped, because I need to wait a minute or two before I can call back).
Has anyone else experienced this or know of a fix? I just tried re-flashing the latest radio and that did not seem to help. I have also tried full system/data wipes as well and none of the Nightly builds for the last month or so have been able to fix it.
Thanks, everyone.
You need to flash any touchwiz rom in order reset your nvram.
Corvetrims77 said:
You need to flash any touchwiz rom in order reset your nvram.
Click to expand...
Click to collapse
Is that even possible? I thought there were issues with going from 4.4.x back to 4.3?
Also, how would I go about locating the latest stock firmware and flashing it? I haven't even thought about touching stock since flashing CM.
pravus87 said:
Is that even possible? I thought there were issues with going from 4.4.x back to 4.3?
Also, how would I go about locating the latest stock firmware and flashing it? I haven't even thought about touching stock since flashing CM.
Click to expand...
Click to collapse
I can't find the original post, I don't have time to look for it right now, it was discussed frequently in Quantumroms thread. I needed to do this as I was experiencing the same issue. I restored the stock firmware on my device via samsungKise ( http://forum.xda-developers.com/showthread.php?t=2390147).
Corvetrims77 said:
I can't find the original post, I don't have time to look for it right now, it was discussed frequently in Quantumroms thread. I needed to do this as I was experiencing the same issue. I restored the stock firmware on my device via samsungKise ( http://forum.xda-developers.com/showthread.php?t=2390147).
Click to expand...
Click to collapse
I will take your word for it. But I have read elsewhere that the MJB bootloader makes it impossible to downgrade, which after checking, is the one that I have installed.
I have done the research on how to install stock firmware. I am just a little hesitant to do so. Any re-assurances would be great.
pravus87 said:
I will take your word for it. But I have read elsewhere that the MJB bootloader makes it impossible to downgrade, which after checking, is the one that I have installed.
I have done the research on how to install stock firmware. I am just a little hesitant to do so. Any re-assurances would be great.
Click to expand...
Click to collapse
From what I have read you are correct, but you just need to install any Touchwiz Rom, search through the quantum posts you will find your answers.
Corvetrims77 said:
From what I have read you are correct, but you just need to install any Touchwiz Rom, search through the quantum posts you will find your answers.
Click to expand...
Click to collapse
Thanks for your help. I was able to flash stock 4.1.1 and then reinstall CM11. So far, looks like the mobile data issue has been resoled.
pravus87 said:
Thanks for your help. I was able to flash stock 4.1.1 and then reinstall CM11. So far, looks like the mobile data issue has been resoled.
Click to expand...
Click to collapse
I'm having the same issue, would you mind giving a quick run through of what you did? I'm downloading the I747MVLUEMK5 firmware to flash in Odin right now. Don't want to do something I shouldn't.
mreadshaw said:
I'm having the same issue, would you mind giving a quick run through of what you did? I'm downloading the I747MVLUEMK5 firmware to flash in Odin right now. Don't want to do something I shouldn't.
Click to expand...
Click to collapse
I actually did not use Odin at all. I was able to find a thread that posted a 4.1.1 stock .zip, a .zip to keep root, and a .zip to keep custom recovery. (I have tried searching for the thread to share with you but am unable to find it). I was definitely over-thinking it. Just install the .zips from TWRP or CWM as you would any other custom ROM -- just make sure you do not have the 4.3 bootloader installed. That's it.
Sorry for the delayed response!
Before flashing DN3 I was on 4.3 and got ~24mbps/15mbps.
Now I hardly get 14/15. Seems the upload is not affected. The connection itself is 30/20 and I'm getting that speed on other devices (laptop, PC).
How would I go about fixing this issue?
Thanks!
EDIT: I now noticed that ping is also 10-15 higher than on other devices.
martinlink said:
Before flashing DN3 I was on 4.3 and got ~24mbps/15mbps.
Now I hardly get 14/15. Seems the upload is not affected. The connection itself is 30/20 and I'm getting that speed on other devices (laptop, PC).
How would I go about fixing this issue?
Thanks!
EDIT: I now noticed that ping is also 10-15 higher than on other devices.
Click to expand...
Click to collapse
Well firstly the most obvious thing to do is to try and count out the rom as problem or identify it as the problem. Have you tried other roms yet or just assuming its the rom??
Flash back to previous rom see if you have same problem. Also try some others as well.
If it's only the DN3 rom then use the search box and search the DN3 thread and if you cant find any reports/discussions reply to the topic see if anybody knows issue/solution.
TheATHEiST said:
Well firstly the most obvious thing to do is to try and count out the rom as problem or identify it as the problem. Have you tried other roms yet or just assuming its the rom??
Flash back to previous rom see if you have same problem. Also try some others as well.
If it's only the DN3 rom then use the search box and search the DN3 thread and if you cant find any reports/discussions reply to the topic see if anybody knows issue/solution.
Click to expand...
Click to collapse
I've tried 4.4.2 stock and it was the same, however 4.3 is still about 20% faster and seems more stable...
Anything I can do to make it as fast as 4.3 while I'm on 4.4.2?
martinlink said:
I've tried 4.4.2 stock and it was the same, however 4.3 is still about 20% faster and seems more stable...
Anything I can do to make it as fast as 4.3 while I'm on 4.4.2?
Click to expand...
Click to collapse
Phone samsung.
I live in a place where phoning samsung would cost more than the time I lose on downloads...
martinlink said:
I live in a place where phoning samsung would cost more than the time I lose on downloads...
Click to expand...
Click to collapse
Email them then
Try flashing the modem version that came with the rom that worked ok on your device.
TheATHEiST said:
Email them then
Try flashing the modem version that came with the rom that worked ok on your device.
Click to expand...
Click to collapse
I used the baltic (SEB) firmware, but it was one flashable file, and I have no idea how to extract the modem from it. Kinda scared to brick the device, too, so I'd rather not do anything without guidance
ok guys, i have a question for you. keep in mind that im new to the phone world lol. ok so a bout a month ago i wanted to unroot my phone but for some reason the tar files on sammobile wasnt working right. so i came on here and downloaded what i believed to be the file that i needed to go back to stock. after i used odin and the phone rebooted it automatically notified me that i had a update. after i accepted the update and it rebooted, it again notified me that i have yet another update. so after this happened i noticed that my phone was updated to 4.4.4 kitkat which would be great exept for the fact that it keeps freezing and when i am on wifi i have a problem getting phone calls aswell as text messages. also when i disconnect from wifi i have to restart the phone to get any data back. is there anything that i can do? is it possible to go back to 4.3 or even 4.2.2? any help would be very much appreciated.
hellrazr209 said:
ok guys, i have a question for you. keep in mind that im new to the phone world lol. ok so a bout a month ago i wanted to unroot my phone but for some reason the tar files on sammobile wasnt working right. so i came on here and downloaded what i believed to be the file that i needed to go back to stock. after i used odin and the phone rebooted it automatically notified me that i had a update. after i accepted the update and it rebooted, it again notified me that i have yet another update. so after this happened i noticed that my phone was updated to 4.4.4 kitkat which would be great exept for the fact that it keeps freezing and when i am on wifi i have a problem getting phone calls aswell as text messages. also when i disconnect from wifi i have to restart the phone to get any data back. is there anything that i can do? is it possible to go back to 4.3 or even 4.2.2? any help would be very much appreciated.
Click to expand...
Click to collapse
Hello! Did you make a back up of your phone before you started the update? That would be the easiest way to go back to how it was. If you used Odin and didn't install a recovery like TWRP or Clockwork you may not have done so. I believe you can reload from Odin with an older ROM it will just erase everything you did. There are stock ROMS here at XDA and galaxynote3root.com as well. Let me know it this helps, sorry for your troubles.
5225
Jedidanno said:
Hello! Did you make a back up of your phone before you started the update? That would be the easiest way to go back to how it was. If you used Odin and didn't install a recovery like TWRP or Clockwork you may not have done so. I believe you can reload from Odin with an older ROM it will just erase everything you did. There are stock ROMS here at XDA and galaxynote3root.com as well. Let me know it this helps, sorry for your troubles.
Click to expand...
Click to collapse
Thanks for the reply, so i wont have any problem downgradeing? I think i read somewhere that i could brick my phone. And if it is possible what version am i able to go back to?
Oh and to answer your question, i have never has a custom recovery on this phone and i didnt make a back up.
Can you post a screenshot of your about phone page?
Techniques said:
Can you post a screenshot of your about phone page?
Click to expand...
Click to collapse
is this good
I'm actually surprised that you did get an update to 4.4.4... You could try going back to NF9. The safest route I see that you can take is to install a custom recovery and make a backup before doing this. If you odin NF9 and it doesn't boot then you're kinda screwed because we technically don't have the 4.4.4 update yet, so if anything goes wrong, you can install a recovery again and restore the 4.4.4 backup.
Techniques said:
I'm actually surprised that you did get an update to 4.4.4... You could try going back to NF9. The safest route I see that you can take is to install a custom recovery and make a backup before doing this. If you odin NF9 and it doesn't boot then you're kinda screwed because we technically don't have the 4.4.4 update yet, so if anything goes wrong, you can install a recovery again and restore the 4.4.4 backup.
Click to expand...
Click to collapse
haha i was surprised to, i cant find anyone else that has it with this phone either, i was kinda wondering if i maybe downloaded the wrong file maybe for a different country or carrier. im not sure how to do the hole backup and custom recovery thing.
hellrazr209 said:
haha i was surprised to, i cant find anyone else that has it with this phone either, i was kinda wondering if i maybe downloaded the wrong file maybe for a different country or carrier. im not sure how to do the hole backup and custom recovery thing.
Click to expand...
Click to collapse
You can get the latest TWRP recovery here : http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.8.1.0-hltetmo-4.4.img.tar
Just odin that and after it's done, go into recovery by doing Vol down + Home and do a backup either in your internal or external storage. After that finishes, you can go back in download mode and odin NF9.
ok thanks for all you help man,
hellrazr209 said:
is this good
Click to expand...
Click to collapse
iam surprised as well how did you get the latest tar on tmobile note 3?
chipis said:
iam surprised as well how did you get the latest tar on tmobile note 3?
Click to expand...
Click to collapse
I got it on here, it was a tar for 4.4.2 i believe and after i downloaded it, it said i had a update. After that i had another update lol which brought me to the hell im in now lol 4.4.4
hellrazr209 said:
I got it on here, it was a tar for 4.4.2 i believe and after i downloaded it, it said i had a update. After that i had another update lol which brought me to the hell im in now lol 4.4.4
Click to expand...
Click to collapse
Well i believe if iam right samobile had not release it for tmo yet
chipis said:
Well i believe if iam right samobile had not release it for tmo yet
Click to expand...
Click to collapse
Yeah its not on their website. I have know idea what i got then lol anyway to fine out if i have something i shouldnt?
ok im flashing back to touch wiz from a miui rom and my wifi seems to be broken..it doesnt matter what touch wiz rom it is ive even gone full stock. wifi turns on connects the hot boots? i think the word is . it goes to the logo and then starts back with the wifi turned off any suggestions?
im really trying to go back to hyper rom its what i had before miui and i wish i woulda never left......srry hyper rom gods forgive me!:crying:
Hrlmbtz said:
ok im flashing back to touch wiz from a miui rom and my wifi seems to be broken..it doesnt matter what touch wiz rom it is ive even gone full stock. wifi turns on connects the hot boots? i think the word is . it goes to the logo and then starts back with the wifi turned off any suggestions?
im really trying to go back to hyper rom its what i had before miui and i wish i woulda never left......srry hyper rom gods forgive me!:crying:
Click to expand...
Click to collapse
20 views and nothing?! i might have to go back to miui smh i use wifi on a daily this is a killer
Hrlmbtz said:
20 views and nothing?! i might have to go back to miui smh i use wifi on a daily this is a killer
Click to expand...
Click to collapse
if this is anything like the S3 was, then the bootloader must match the radio. Make sure you are on the latest. Not much I can go on since I am new to the Note 3.
Chr0nicDreamz said:
if this is anything like the S3 was, then the bootloader must match the radio. Make sure you are on the latest. Not much I can go on since I am new to the Note 3.
Click to expand...
Click to collapse
ima check and see if those match...i hope i can get this fixed
thanks for the reply
Chr0nicDreamz said:
if this is anything like the S3 was, then the bootloader must match the radio. Make sure you are on the latest. Not much I can go on since I am new to the Note 3.
Click to expand...
Click to collapse
Hrlmbtz said:
ima check and see if those match...i hope i can get this fixed
thanks for the reply
Click to expand...
Click to collapse
ok bootloader nk3 baseband nk3 but pda is nf9 and csc is nf9 should i flash down to nf9?
Hrlmbtz said:
ok bootloader nk3 baseband nk3 but pda is nf9 and csc is nf9 should i flash down to nf9?
Click to expand...
Click to collapse
F9 all the way through still loops ..guess im going back to miui
not that anyone seems to care but
Hrlmbtz said:
F9 all the way through still loops ..guess im going back to miui
Click to expand...
Click to collapse
i flashed jedi elite wich is a nb4 rom and everything works fine i dont get it every thing at the moment is nk3 other than pda and csc which displat nb4 anything else seems to crash on wifi any idea what the issue could be? if i flash say an older version of hyper rom and update on through should it work?