And have experience with these?
http://www.ebay.com/itm/New-QuickSa...Cell_Phone_PDA_Cases&var=&hash=item3f2ba86d84
So cheap but not sure of quality.
For 4 bucks how can you go wrong.
I had one on my HTC One and I loved it. Great feel in the hand and almost nothing added to the phone bulk or weight wise. Just don't expect to protect much in the way of drops.
Well I'm a sucker for marketing so I was wondering if I should wait for a Meifeng branded one or whatnot.
Sent from my Nexus 5 using xda app-developers app
Loved the one I had for my nexus 4. Will probably order one on these as well since both the spigen cases I ordered have issues.
Sent from my Nexus 5 using Tapatalk
Just an FYI, there are several sellers on eBay with this case. I just ordered from the link below. $3.98 delivered. The one in the OP is $3.99 + $0.99 shipping. I know, it's only a dollar but hey...
http://www.ebay.com/itm/380762720139
I remember a recent news about street selling case vendors in china.
The cases have funny smell at first use due to cancer causing chemical agents in the material used to make the case.
mytouchrocks said:
I remember a recent news about street selling case vendors in china.
The cases have funny smell at first use due to cancer causing chemical agents in the material used to make the case.
Click to expand...
Click to collapse
Everything causes cancer these days. I figure if I can get a little bit of every form of cancer, they will cancel each other out.
Sent from my Nexus 5 using Tapatalk
---------- Post added at 04:47 AM ---------- Previous post was at 04:44 AM ----------
What do these feel like anyway? It looks like it has sandpaper on the back.
Sent from my Nexus 5 using Tapatalk
mytouchrocks said:
I remember a recent news about street selling case vendors in china.
The cases have funny smell at first use due to cancer causing chemical agents in the material used to make the case.
Click to expand...
Click to collapse
Probably a shill.
Does not look that good...instead of that I would prefer to take my N5 naked.....
For 4 bucks, I'll pick one up too. I've never had a rough feeling case like this one on any phones before so may as well try it.
Had this on the nexus 4 and I loved it. Of course, I got it simply for scratches and not for drop protection although it probably did help a bit. I've already ordered this for nexus5.
I ordered one of these last week. Who knows when it'll come in. I'll check back here when it does though. I think I ordered a gray one but I'm not sure - I bought 4 or 5 cases on eBay and kinda forget which ones I got.
For those that have gotten these type of cases before; are the insides of the cases the same sand feel as the outside? I am afraid that the inside would scratch away the matte coating of the phone.
bleuiko said:
For those that have gotten these type of cases before; are the insides of the cases the same sand feel as the outside? I am afraid that the inside would scratch away the matte coating of the phone.
Click to expand...
Click to collapse
It is the same as the outside though it's not as rough as you think it is. IMO it won't scratch off the matte coating.
One's on the way eventually. Looked softer then the Nillkin patterned case.
Judging by how flexible the case is in this picture, it looks like it's made out of some TPU-like material rather than the hard plastic that other slim cases are made out of. So I don't think scratching will be a problem.
I had a quicksand on my n4 and it was not flexible at all, we'll see when my n5 version comes in.
Thanks for the plug OP. I'll try these as well.
Love these type cases. But they are not all created equally. Had the best Rock quicksand one my S3. It was very good. Have a Meifeng on my N4 and it is just as good. Rocking a Bear Motion quicksand type on my S4 and it is solid as well. But I've tried some knock offs until I found the good ones and found that those, while they had the feel, were very flimsy and would crack.
The problem I've found is that I haven't found one mfg that supports multiple phones. None of those that I named had a case for any of the phones except the one I already had it on. =-O
Sent from my Nexus 5 using XDA Premium 4 mobile app
Got mine today, black version. Looks great on N5, fits like a glove but still easy enough to get it off and it doesn't add much bulk at all. Tiny lips around edges, won't protect against drop but good enough if you place screen face down. Material is pretty grippy, sandy texture doesn't scratch N5 soft touch plastic.
I've a gray version by bear motion for HTC One, but bought this one on eBay because BM isn't making one for N5.
Related
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
ttran97 said:
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
Click to expand...
Click to collapse
Agree with you on all fronts, including car dock and easiness of taking the case off.
Sent from my ADR6400L using XDA App
Link?
10char
want a droid said:
Link?
10char
Click to expand...
Click to collapse
Was easy enough to find:
S-Line Ebay Case
For what it's worth, I got the black one, but I've heard better comments on the smoke one when I was doing my research.
Sent from my ADR6400L using XDA App
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
pretty cool looking, does it hold up?
is the inside rubber/silicon?
viceversa said:
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
Click to expand...
Click to collapse
There seems to be 2 types of materials, 3 finishes.
On mine, the clearish part is a slightly-bendable hard plastic with the texture of what all of my matte hard plastic. Think the type of plastic that is one most power adapters (that aren't shiny) but add a slightly bendable aspect to it.
The black part on the back is shiny, slick, smooth, and more flexible. It's similar to silicon cases (what I can assume you mean by soft gel/rubber) but I think it's still different. It seems to be less "floppy" even though it is very bendable. The shiny black part seems to "stick" to certain surfaces (such as my desk and other hard/flat surfaces) but not to some that you would expect (it doesn't stick to my pockets at all and glides just fine across my clothing, car seat, and non-leather furniture - it might stick to leather, I don't know). The black part on the front appears to be the same material as the black part on the back, but with a matte finish. The result of the different finish is that it doesn't have the "stickiness" on much of any surface, yet still gives your hand a slight bit of grip beyond what the stock TBolt gives you.
Overall, the "feel in hand" is comfortable and it gives you extra grip but doesn't feel sticky or anything like that. Imagine going from a slick, hard-plastic phone to a phone with a rubberized body (like our TBolt has). Going from a naked TBolt to this case is kinda like taking that one step further. But in no way could I ever describe it as "feeling sticky" in my hand or pocket.
jblist90 said:
pretty cool looking, does it hold up?
Click to expand...
Click to collapse
So it looks like/feels like it's not going to just fall apart or anything like that, if that's what you mean. I can't envision drops/dings or other daily use wearing it down.
The ONE concern that I have about it holding up is because it is made with two types of "plastic" (I don't know if it's plastic, silicon, rubber, or whatever, hence my quotes). I fear that if I take the case off and on a lot (for my car dock), that the joints of the two plastics might start to come apart. This is NOT based on any quality issues that I have seen so far, just a concern based on the fact that this wasn't produced in a single mold when it was melted down (this is coming from somebody with an engineering background).
I will be shocked, though, if I have a problem with this case in the next 6 months, and for $5, well, I'd say that's pretty damned good!
boristhebladexx said:
is the inside rubber/silicon?
Click to expand...
Click to collapse
Read my post a couple posts up about the 2 different types of materials with 3 finishes. As best as I can tell, the inside is the same material as the outside. What this means is that 60% of it is the very flexible plastic while the clear part does cover ~40% of the back. I would expect the black part to offer more protection to a fall/bump than the clear part, and fortunately the black part covers most of the corners and edges. Still, I expect the clear part to offer more protection than a hard plastic case would.
Updated the OP with some photos. Perhaps they will help.
thanks for the detailed feedback!
This case will also fit into the Verizon holster/shell combo holster. You just can't use the VZW shell, but it'll slide into the holster. The fit is a little snug, but it works. I like to swap out this case with the VZW shell. This one provies more protection, but the VZW one is pretty cool too.
In case anybody was wondering, I got mine from this seller from China: http://goo.gl/62Fhx
It took something like 10 days to get to me, but I didn't mind since it cost less than a good burger.
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Click to expand...
Click to collapse
Hey, thanks for the write up. I'm in Arizona and ordered one for $5 from a California seller. I should have it early next week.
Thanks again
Sent from my BAMF ADR6400L using XDA Premium App
I ordered mine just before the thread was started and its my favorite case for my Thunderbolt. It looks so cool too!
sent from my BAMF Thunderbolt!
Well Done
$5 ARE YOU KIDDING ME? grrr I have the silicone case that I got from VZW for $15 and it's not even all that..
But I think all cases will add some bulk for for that price you cant go wrong. Great buy.
Might have to check this one out
Just a heads up, with this casr the phone fits like a champ in the holster of the shell/holster combo i got from VZW
sent from my BAMF Thunderbolt!
Hi All
So the hunt for a good Protective Rubber Gel Back Case for Note begins... similar to this one would be great!!
http://www.dealextreme.com/p/protec...one-back-case-for-i9100-galaxy-s2-black-70754
The minute I find one I'll buy it... I actually prefer getting the case even before I buy the Note.
Brgds... /Tubgirl
I'm with you, this phone is too expensive to damage. I've been searching everyday and have yet to find anything. I usually prefer Ballistics' cases but I doubt they will be making one for this phone so it's back to the drawing board. I'm also wondering if zagg will be making a screen protector for this device. Don't know what I can expect with such a massive device. Maybe turn to the manufacturers of the best tablet cases... I'll post here when I find some cases.
iLiberate said:
I'm with you, this phone is too expensive to damage. I've been searching everyday and have yet to find anything. I usually prefer Ballistics' cases but I doubt they will be making one for this phone so it's back to the drawing board. I'm also wondering if zagg will be making a screen protector for this device. Don't know what I can expect with such a massive device. Maybe turn to the manufacturers of the best tablet cases... I'll post here when I find some cases.
Click to expand...
Click to collapse
I facebooked Both Ballistic and Otterbox and they both say they don't have any plans for a case.
I'd hate to use my Note without a really good case. Maby i'll make one out of wood...
blobotorian said:
I facebooked Both Ballistic and Otterbox and they both say they don't have any plans for a case.
I'd hate to use my Note without a really good case. Maby i'll make one out of wood...
Click to expand...
Click to collapse
I'm liking the little brown case that just has a front flat that opens up like a book but it's not protective at all lol
Me too but I can't find a link to buy it yet. Expansys has blue and white...... Yuck..
Sent from my GT-P1000 using Tapatalk
I think the case of expansys is sleek. It's not making the note any thicker.
Hope they got variety of colors though..
samsung flipover
Samsung will come with a flipover, the back of the flipover will replace the original back of the note. So the note will only become a few mm thicker
I'm also looking to get the Samsung flipover cover when it becomes available. The only problem is the side of the Note remains unprotected, I'm thinking getting a gel case and trim off the left hand side so it will fit togther with the flipover cover.
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
deliriousbb said:
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
Click to expand...
Click to collapse
How does the screen protector feel? I know the Skinomi's tablet protector feels rubbery.
deliriousbb said:
Meanwhile, here is a really nice durable skin that is already available on Amazon I have used the Skinomi on my previous phones and it covers the phone nicely. All the cutouts are aligned and it barely feels like there is anything on it. Btw, the carbon fiber look makes it look really mean and clean. oh another thing, it's lifetime warranty too.
Click to expand...
Click to collapse
The carbon fibre film must just be 3m di-noc carbon fibre, can be had much cheaper on Ebay and you can just custom cut it to any device.
I wont be sludging up my screen with a screen protector
RMXO said:
How does the screen protector feel? I know the Skinomi's tablet protector feels rubbery.
Click to expand...
Click to collapse
I used the Carbon Fiber skin on my Streak and loved it .. I will order one for my Note.
Tubgirl said:
Hi All
So the hunt for a good Protective Rubber Gel Back Case for Note begins... similar to this one would be great!!
http://www.dealextreme.com/p/protec...one-back-case-for-i9100-galaxy-s2-black-70754
The minute I find one I'll buy it... I actually prefer getting the case even before I buy the Note.
Brgds... /Tubgirl
Click to expand...
Click to collapse
yup....looking for the same but no luck.
The flip cover is not practical IMHO esp when making calls.
I always used to get hard crystal clear cases such as
http://www.ebay.co.uk/itm/Clear-Cry..._MobilePhonesCasesPouches&hash=item3f0fa5fde0
for my phones.
But lately ive really liked the TPU gel case with stand, such as:
http://www.ebay.co.uk/itm/BLACK-TPU...204593?pt=PDA_Accessories&hash=item3f0db99071
Which is just like the case in the OP really
The stand is surprisingly useful!
---------- Post added at 10:32 PM ---------- Previous post was at 10:28 PM ----------
http://www.clove.co.uk/samsung-galaxy-note-official-flip-cover-case-black
is the only case i can find at the moment
Everyone who doesn't need the case right away, wait til piel frama comes out with a imagnum type of case. This case is expensive but it protects your device against any earthquake you throw at it. I have one for my hd2 and getting one for the note cause my hd2 is still like new. You can put in your e-mail and they'll let you know when it's there to buy. Here's the link
http://www.pielframa.com/samsung-galaxy-note-cases.htm
Cheers
Sent from my HTC HD2 using XDA App
MassoltoV said:
Everyone who doesn't need the case right away, wait til piel frama comes out with a imagnum type of case. This case is expensive but it protects your device against any earthquake you throw at it. I have one for my hd2 and getting one for the note cause my hd2 is still like new. You can put in your e-mail and they'll let you know when it's there to buy. Here's the link
Cheers
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
If they release a case like this for the Note I think it might be worth a try. The kickstand could be useful.
w w w.pielframa. c o m/ apple-iphone-4s-cases-imagnum2.htm
drhoades01 said:
If they release a case like this for the Note I think it might be worth a try. The kickstand could be useful.
w w w.pielframa. c o m/ apple-iphone-4s-cases-imagnum2.htm
Click to expand...
Click to collapse
You're so right! This type i would use fore use @ home and the solid closed imagnum case for outside
Sent from my HTC HD2 using XDA App
Guys do you think a leather/cloth Pouch Pull case would be good enough?
E.g: I though I had more posts here. Anw can't post complete link. The below works tho.
images.esellerpro.com/2209/I/334/07/Samsung%20Galaxy%20S%202%20Black%20Leather%20Pouch%20Open.jpg
I hate any other cases. Screen protector will be fitted of course.
Just found these. I am about to order one right now...
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001331&products_id=33857
zenbbqmaster said:
Just found these. I am about to order one right now...
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001331&products_id=33857
Click to expand...
Click to collapse
I'm considering this one as well. Please post your thoughts when you receive it.
Finally. An amazing TPU case without the cheesy back design.
http://tpu-cases.com/index.php?main_page=index&cPath=42_68
Amazon link
Lol whats so amazing about them
Sent from my MB860 using XDA
The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.
LLStarks said:
The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.
Click to expand...
Click to collapse
Yes, its just a very solid tpu case.
Sent from my SAMSUNG-SGH-I717 using xda premium
Wond3r said:
Lol whats so amazing about them
Sent from my MB860 using XDA
Click to expand...
Click to collapse
The quality of the plastic is superior. Once I bought one for my Galaxy Nexus I've got one for every phone since then. They are the best TPU brand for phones.
You won't regret it. It's cheap too!
My SII Skyrocket Diztronic case ended up being my favorite of the various cases I tried.
Not at all flashy. Nothing special about it.
It just "works" properly. And doesn't get beat up like cheaper cases do.
And I like that they are finally doing cutouts for BOTH the volume & power unlike on my last case.
I hate anything covering the power or volume buttons. Though some folks do like that.
I've used these cases for 2 years on Captivate, Infuse, Galaxy Nexus and Note. They're grippy, durable and fit perfectly. I just ordered one for my S3. Thanks for the heads-up.
I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?
I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.
jfenton57 said:
I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.
Click to expand...
Click to collapse
Damn you. I bought a Diztronic Matte Black.
komugi said:
Damn you. I bought a Diztronic Matte Black.
Click to expand...
Click to collapse
Matte Black is a the best color imho
Sent from my SAMSUNG-SGH-I717 using xda premium
komugi said:
I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?
Click to expand...
Click to collapse
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol
Sorry for the delay in getting our S III cases up guys, I was out of town and had an employee put them up. Unfortunately she accidentally set the start selling date as July 6th so the pages never went live. I said didn't you realize we weren't getting any orders?! We sent inventory to Amazon on Friday so Prime shipping options should be available either Tuesday or Wednesday.
We did include a screen protector with this release made of Japanese film. When we first started including screen protectors we were using a Korean film, which is slightly better than Chinese but still had some rainbowing and purpling. These Japanese based ones are great, very good clarity. Even though including them almost doubles our costs we've kept our prices the same for the time being. Thanks everyone for your continued support!
Sent from my SPH-D710 using xda premium
Just got the matte-clear case! Looking forward to getting it in the mail
OneStepAhead, does the screen protector cover the entire front and have cut-outs?
Wond3r said:
Lol whats so amazing about them
Click to expand...
Click to collapse
The company resides and manufactures in America (Madison, WI, near me!!). The customer service is absolutely OUTSTANDING. You basically end up talking to a real person who is dead set on making sure you're satisfied.
And TPU, in general, is perfect for me. Thin, adds a little grip but doesn't stick in pockets.
vince1234 said:
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol
Click to expand...
Click to collapse
cldn't agree more, they are indeed bad. Just ordered Diztronic for my S III . Loved it on my Nexus , was waiting for a week for it to be available in the meanwhile i thought i would try cruzerlite . Apart from the fit, i dint like the looks of it too, esp that i wanted something with a plain back matte finish . Diztronic was the perfect fit . Love it Love it!!!
Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)
jfenton57 said:
Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)
Click to expand...
Click to collapse
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
LLStarks said:
OneStepAhead, does the screen protector cover the entire front and have cut-outs?
Click to expand...
Click to collapse
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.
OneStepAhead said:
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.
Click to expand...
Click to collapse
Great response. Its great to have good interraction with the manufacture and the end user. That makes for the best experience in both parties. Thank you.
So.. I have tried my very best to search if anyone is talking about this in any other thread but can't find nothing on it.
I have the Nexus 4 version of the case and it has done me very well! Although about 10 days ago I broke it cause I always pop it on and off while bored.
The only other case that can compete with this (slimness wise) is the Slim SPIGEN Case.
I don't understand how there isnt a thread on this case nor is there any discussion on it! What gives?
What's your opinions on it? Which one would you choose out the two?
$5.99 RINGKE: http://www.amazon.com/RELEASE-PERFE...qid=1383319011&sr=1-2&keywords=ringke+nexus+5
$ 9.99 SPIGEN: http://www.amazon.com/gp/product/B00EV8Y50S/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Personally I'm going towards the Ringke case... its cheaper, thinner and looks a little better.
Maybe I'll be swayed towards the Spegen case from you guys!
EDIT/ UPDATE-
Finally got both cases and two phones to compare the two side by side.
After using both of them for a little bit I have decided the Ringke is the better case.
Reasons: Slimmer, covers the phone more, does not have an air gap on the back (you can press the SPIGEN on the back and it will move)
I had to sand both of them down to get rid of the ruff parts.
These super thin cases are way less popular (especially with the younger crowd) than the flashy "hybrid-like" cases that offer more protection and bling. This was the case with the GS4 as well (take a look at those forums).
I personally love the uber thin cases that offer only scratch resistance (and maybe a little drop-proof-ability) but are like having nothing on the phone and not adding to it's bulk. I have the Ringke slim for my GS4 and on the delivery truck a Ringke slim in transit for my N5.
I was very disappointed with the Spigen neo-hybrid for the GS4 and sold it immediately.
The Ringke slim on the other hand is super solid and more professional looking (if you want to call it that ).
I'm sure the Spigen Ultra Fit (Slim) would be very comparable to the Ringke, it looks almost identical in pics and specs
Glad someone brought this up too. I was looking at these two as well and this is something funny i noticed.
the size comparisons between the two are not consistent. SPIGEN reports a .3mm thicker phone but otherwise its the same size.
I'm leaning toward the RINGKE as well. cheaper if i ordered two of those with shipping than to order 2 of the Spigen and get something else for 1.02$ to hit the free shipping mark at 25.
jbdan said:
These super thin cases are way less popular (especially with the younger crowd) than the flashy "hybrid-like" cases that offer more protection and bling. This was the case with the GS4 as well (take a look at those forums).
I personally love the uber thin cases that offer only scratch resistance (and maybe a little drop-proof-ability) but are like having nothing on the phone and not adding to it's bulk. I have the Ringke slim for my GS4 and on the delivery truck a Ringke slim in transit for my N5.
I was very disappointed with the Spigen neo-hybrid for the GS4 and sold it immediately.
The Ringke slim on the other hand is super solid and more professional looking (if you want to call it that ).
I'm sure the Spigen Ultra Fit (Slim) would be very comparable to the Ringke, it looks almost identical in pics and specs
Click to expand...
Click to collapse
Why exactly were you disappointed with the Neo Hybrid for S4? I had my eyes on the Champagne Gold Neo Hybrid for N5.
I'm personally not a fan of the Slim series as it doesn't offer protection for the top and bottom of the device. Whereas, the Galaxy Nexus Slim it covered the whole phone 360 and kept its slim factor.
zephiK said:
Why exactly were you disappointed with the Neo Hybrid for S4? I had my eyes on the Champagne Gold Neo Hybrid for N5.
I'm personally not a fan of the Slim series as it doesn't offer protection for the top and bottom of the device. Whereas, the Galaxy Nexus Slim it covered the whole phone 360 and kept its slim factor.
Click to expand...
Click to collapse
I totally understand about the protection the slim series cases don't offer. It's all about preference indeed.
That said, I didn't like the neo-hybrid because it felt like a gimmick (if that makes sense). In other words it felt and looked like they made a case to just look "cool" rather than making a case to form fit a phone. It does offer more protection than the slim fit cases though. It was also too "square" looking for me once on the phone. Made the GS4 look iPhone-ish to my eyes.
Funny thing though....I sold it to my 17 yr old nephew (well it was free but he paid shipping) and he thought it was the coolest thing since sliced bread. :good:
jbdan said:
I totally understand about the protection the slim series cases don't offer. It's all about preference indeed.
That said, I didn't like the neo-hybrid because it felt like a gimmick (if that makes sense). In other words it felt and looked like they made a case to just look "cool" rather than making a case to form fit a phone. It does offer more protection than the slim fit cases though. It was also too "square" looking for me once on the phone. Made the GS4 look iPhone-ish to my eyes.
Funny thing though....I sold it to my 17 yr old nephew (well it was free but he paid shipping) and he thought it was the coolest thing since sliced bread. :good:
Click to expand...
Click to collapse
I like the slimness but the top/bottom exposed is a no-no for me. I really wonder why they decided to go with that design. This is the Galaxy Nexus Slim I was referring to http://www.rearthusa.com/sprint_verizon_galaxy_nexus_slim.html slim factor and top/bottom protected.
Hmm, I guess that is true with the Champagne Gold. I just like the mixture between the two colors. So more or less its just aesthetics/appearances on your part but nothing of the case. I was just reading that the older versions of it have had peoples' outer part of the case to crack. Which was the same case for me when I had the official LG bumper for N4 so that was definitely worrisome.
Haha, I think its a pretty neat case too. Looks nice.
zephiK said:
I like the slimness but the top/bottom exposed is a no-no for me. I really wonder why they decided to go with that design. This is the Galaxy Nexus Slim I was referring to http://www.rearthusa.com/sprint_verizon_galaxy_nexus_slim.html slim factor and top/bottom protected.
Hmm, I guess that is true with the Champagne Gold. I just like the mixture between the two colors. So more or less its just aesthetics/appearances on your part but nothing of the case. I was just reading that the older versions of it have had peoples' outer part of the case to crack. Which was the same case for me when I had the official LG bumper for N4 so that was definitely worrisome.
Haha, I think its a pretty neat case too. Looks nice.
Click to expand...
Click to collapse
Yup, ya never know when the N5 might take a tumble to the pavement and land on the top/bottom or the screen (ouch)!
Oh I think the neo-hybrid looks great in a picture that's why I ordered it. On my GS4 was a different story. The plastic piece on mine felt like it would break very easily, but I don't know which version I had.
Go for it get what ya want. You can always return it and they're so cheap nowadays you don't really miss out on much by doing so
jbdan said:
Yup, ya never know when the N5 might take a tumble to the pavement and land on the top/bottom or the screen (ouch)!
Oh I think the neo-hybrid looks great in a picture that's why I ordered it. On my GS4 was a different story. The plastic piece on mine felt like it would break very easily, but I don't know which version I had.
Go for it get what ya want. You can always return it and they're so cheap nowadays you don't really miss out on much by doing so
Click to expand...
Click to collapse
They're so cheap that its not even worth sending it back with the shipping fee.. plus I'm lazy Neo Hybrid is actually ~$19.99 as of right now.
Can't wait for the accessory party to finally begin and a bunch of nexus 5 videos of accessory unboxing/reviews to appear. It will make our jobs a lot easier.
Its kind of funny seeing Rearth and Spigen practically offer the same case and design and names. Slim/Hybrid, what is up with that anyway?
zephiK said:
They're so cheap that its not even worth sending it back with the shipping fee.. plus I'm lazy Neo Hybrid is actually ~$19.99 as of right now.
Can't wait for the accessory party to finally begin and a bunch of nexus 5 videos of accessory unboxing/reviews to appear. It will make our jobs a lot easier.
Its kind of funny seeing Rearth and Spigen practically offer the same case and design and names. Slim/Hybrid, what is up with that anyway?
Click to expand...
Click to collapse
lol very true!
idk maybe they're owned by a same parent company?
Only problem I have with these cases is that when I always use one I notice that they tend to scratch your phone with the way they snap on.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Alaris said:
Only problem I have with these cases is that when I always use one I notice that they tend to scratch your phone with the way they snap on.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
I thought about that too when I first ordered the Ringke slim. To my delight there is not one scratch on my GS4 (had since launch) caused from the case and I've taken it on and off over a dozen times.
Edit: I will say however, that the case is tough to get off! It's snaps on easily and extremely secure
I like to wash them every week
Yeah I had one on my N4 and went to take it off (like to get the lint off every once and a while) and it scuffed one of the corners. Most people wouldn't notice but it threw my ocd into over drive aft err that lol.
Sent from my SAMSUNG-SM-N900A using Tapatalk
zephiK said:
They're so cheap that its not even worth sending it back with the shipping fee.. plus I'm lazy Neo Hybrid is actually ~$19.99 as of right now.
Can't wait for the accessory party to finally begin and a bunch of nexus 5 videos of accessory unboxing/reviews to appear. It will make our jobs a lot easier.
Its kind of funny seeing Rearth and Spigen practically offer the same case and design and names. Slim/Hybrid, what is up with that anyway?
Click to expand...
Click to collapse
Wait for the party to begin? I've already ordered 8 cases! Lol
I'll post up a comparison of the rearthe and the spigen when I get them.
Sent from my Nexus 4 using Tapatalk
Alaris said:
Only problem I have with these cases is that when I always use one I notice that they tend to scratch your phone with the way they snap on.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Yeah exactly why I stopped using cases. I never liked cases, prefer naked. But got the slim ringke for my gnex a couple years ago. Loved the slimness but ended up scratching my phone.
I pop my case on and off all the time and it has never scratched my N4. Maybe its just the N4 that doesn't scratch.
The reason I like these slim cases is because it does add much bulk and it keeps the design of the phone some what. I'm the kind of person that has never dropped their phone on a hard surface. Worst surface iv dropped it on is carpet which was from my lap.
I'm thinking of buying both now cause I can't make my mind up at all!
Sent from my Nexus 7 using XDA Premium 4 mobile app
spicydicy said:
Wait for the party to begin? I've already ordered 8 cases! Lol
I'll post up a comparison of the rearthe and the spigen when I get them.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Lol I was a accessory crazy guy in N4. Trying to make my first purchase the most satisfied one and stick with it im leaning towards the Neo Hybrid
Had a ringke slim on both my s3 and s4. Have one on order for the n5 as well.
Really like the s4 case but certainly not for someone that drops their phone all the time.
Sent from my GT-I9505 using Tapatalk
just ordered the spigen ultra fit soft matte white for my black nexus 5
i hate cases. so much attention and value is dedicated to the aesthetics and build quality of a phone only to be covered up by an uglier case. my gf has an iphone, a really beautiful phone, and she covers it up with the most hideous otterbox. in her case it is warranted because she is a clutz, but it bothers me every time i see it. i liken it to buying a really nice sports car and then covering it up in foam to drive around.
BUT... i've had my current phone for 1.5 years and i remember the feeling when i dropped it the first day i bought it... it felt bad. only a small scratch but i swear i stared at that scratch and rubbed my finger over it so many times the first week in regret. hopefully this case will be minimal enough and good feeling enough so that i will keep it on my phone. but i'm predicting i'll keep it on for about 2 weeks before i decide i just want my phone beautiful and nude.
why spigen over ringke? well first off i wanted matte and second off ringke advertises "world's thinnest case" and then proves it with a picture of a nexus 5 with the wrong thickness measurement. so i had to dock them for semi false advertising.
the spigen and ringke were both $10 for me with shipping and handling included.
Has anyone bought a Ringke Slim case from Rearth and actually recieved their Nexus 5 yet?
How does it fit? Any comments/reviews would be fun to hear. I'm still waiting for both to arrive.
I love the Ballistic Hard Core case
Mobicrab
My favorite
http://www.ebay.com/itm/Mobicrab-Me...ame-Skin-for-Galaxy-S3-8-Colors-/130969057588
UAG black - very good protection with just enough bulk/weight combo. Also, the case fits perfectly on the phone, very high quality production. With awesome design to boot. The screen cover it brings is also the best one i've ever seen, no cheapo 3 for 1€'s from ebay even compare.
http://www.private.abacus24-7.com/ebimages/093-UAG-S3BK.jpg
Survived plenty of abuse already, phone remains mint.
http://www.zoogue.com/galaxy-s3-social-case/
Best combination of protection, slimness, and grip but is easy to slide in and out of a pocket.
I like my otterbox armor series.
Sent from a planet far far away.
Lifeproof nüüd.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Out of all the 20-30 cases I had Lol, the body glove shock suit fit the glove well and still does. No other case will be needed. Am now trying to sell the leftovers Lol.
Sent from my Nexus 4 using Tapatalk 2
jskello said:
I love the Ballistic Hard Core case
Click to expand...
Click to collapse
Yes! This!!! I have the exact same case its amazing! Like nothing can destroy this phone with this case!
I used a SGP Neo Hybrid since more than one year but a few month ago the polycarbonat frame is broken so I buy this one:
http://www.ebay.com/itm/Book-Wallet...-Samsung-Galaxy-S3-III-GT-i9300-/271210987593
And I'm total happy with this Case since 2 month!
After trying about 10 cases of varying materials , shapes and sizes I chose the fake Neo Hybrid case since the origional doesn't seem to be available anymore. Build quality is quite good for under 10 bucks and if it breaks itll be cheap to buy another.
UAG is the best!! Very good quality and build. Using it with a 0,4 mm glass screen protector. Beats the plastic ones by a 1000 miles.
+1 on the bodyglove shocksuit!! The shizz.
Spigen neo hybrid now, had an Otterbox commuter for the last year. Like them both but I prefer the Spigen
Got to agree body glove is the best. Good price and doesn't make the phone to big and bulky.
Sent from my SGH-T999 using xda app-developers app
kaynpayn said:
UAG black - very good protection with just enough bulk/weight combo. Also, the case fits perfectly on the phone, very high quality production. With awesome design to boot. The screen cover it brings is also the best one i've ever seen, no cheapo 3 for 1€'s from ebay even compare.
Survived plenty of abuse already, phone remains mint.
Click to expand...
Click to collapse
Oh my god yes. the UAG case is really nice. The one thing I do dislike is that the lettering on the back came off within the first week of having it. Still recommend for durability. Btw those who want the case, Slate is a lot closer to the natural GS3 blue than you think!
xXshur1kenXx said:
Oh my god yes. the UAG case is really nice. The one thing I do dislike is that the lettering on the back came off within the first week of having it. Still recommend for durability. Btw those who want the case, Slate is a lot closer to the natural GS3 blue than you think!
Click to expand...
Click to collapse
most of the fake UAG case sell cheap and have letters failling off or just painted on it not mentioning the quality is not the same at all.
im not saying you brought fake one but just sharing some experiences.
also my fav case is indeed a UAG one (Scout/black) i got it from Ebay for 24$ port inclusive from a Belgian seller, i did some investigation because even if its only 10 bucks less than the official store its still suspicious, i did sent some detailed pics of the case and box info/bar code and according to the customer service : it's a original one, nonetheless i spared 10$ on it but i didnt got custom taxes.
ReiverBlade said:
most of the fake UAG case sell cheap and have letters failling off or just painted on it not mentioning the quality is not the same at all.
im not saying you brought fake one but just sharing some experiences.
also my fav case is indeed a UAG one (Scout/black) i got it from Ebay for 24$ port inclusive from a Belgian seller, i did some investigation because even if its only 10 bucks less than the official store its still suspicious, i did sent some detailed pics of the case and box info/bar code and according to the customer service : it's a original one, nonetheless i spared 10$ on it but i didnt got custom taxes.
Click to expand...
Click to collapse
Wow, I didn't know they sold many knockoffs. Mine was direct from Amazon through UAG. I think I just have oily skin which made it easier to reduce the sticky solution for the lettering. Thanks for letting me know of that! I might get another just to have more color selection
Lifeproof Fre.
Otterbox Armour is a close second, but the lifeproof is more practical for everyday use, as it's more pocketable and wireless charging works through it.
compro01 said:
Lifeproof Fre.
Otterbox Armour is a close second, but the lifeproof is more practical for everyday use, as it's more pocketable and wireless charging works through it.
Click to expand...
Click to collapse
exactly what make a UAG better than a Otterbox, Otter are nice but too bulky.
funny experience: i had 2 S3 dropped from my balcony (around 3meter)1 from a friend with a Otterbox defender and mine with the UAG without screen protector both hit the concrete on the lower edge (where the soft bumper is) result : mine nothing the other had a little (very small) crack on the bottom of the screen xD
sorry for the blurry quality xD
compro01 said:
Lifeproof Fre.
Otterbox Armour is a close second, but the lifeproof is more practical for everyday use, as it's more pocketable and wireless charging works through it.
Click to expand...
Click to collapse
That life proof looks really solid but still just a bit too bulky for me. I might get something a bit thicker than my UAG, but first I need a proper full screen protector. I've gone through like 5 because they are dammed hard to apply.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4