guyz i own xperia s for about a year the only problem is that till the day jelly bean is released for xperia s and after updating to every new firmware my xperia s camera stops working at all it says error camera not available and in one of diagnostic application it says camera driver not installed
once i tried custom rom and camera works on it but rom was not good after that i tried many roms that are based on 4.1 and 4.2 but in none of these my camera works so i switched back to ics and everything is fine
so i want you to tell
any solution for this issue and if no solution for stock rom thjen what rom should i install to get this thing work
i checked cm 10.1 but it says it has a lot of bugs
so plz help me in this issue
What is your firmware version?If u use the latest FW1.96,u should flash a kernel based on it.
ztc1997 said:
What is your firmware version?If u use the latest FW1.96,u should flash a kernel based on it.
Click to expand...
Click to collapse
6.2.B.1.96
and can you explain this kernal thiny i am not much aware of it
I am using doomkernel v6 http://forum.xda-developers.com/showthread.php?t=2305591
ztc1997 said:
I am using doomkernel v6 http://forum.xda-developers.com/showthread.php?t=2305591
Click to expand...
Click to collapse
so now i have to update my phone to .96 firmware and then flash this kernal?
kamransaeed15 said:
so now i have to update my phone to .96 firmware and then flash this kernal?
Click to expand...
Click to collapse
If u have unlocked bootloader?
ztc1997 said:
If u have unlocked bootloader?
Click to expand...
Click to collapse
its locked now but will do unloack it right now flashing stock .96 firmware
You can only use the official kernel with locked bootloader
Use flashtools to flash a 1.96 tft.
ztc1997 said:
You can only use the official kernel with locked bootloader
Use flashtools to flash a 1.96 tft.
Click to expand...
Click to collapse
yes i know just flashed this fw and now its time to unlock boot loader
there is sometthing happened that i couldnt beleive
i just flashed th.96 fw and just tried if cam works it opens and this is not enough my front cam also started working which was dead for about 5 months
i restarted my phone and its still working i couldnt beleive this
so after two days of working fine it stops again
same issue error camera not available front cam also not working even flash not working if i use a torch app even then flash is not working but everything was fine just an our ago
kamransaeed15 said:
so after two days of working fine it stops again
same issue error camera not available front cam also not working even flash not working if i use a torch app even then flash is not working but everything was fine just an our ago
Click to expand...
Click to collapse
Do a fresh installation of ROM and let it settle for 5mins. Then reboot your phone and let it settle for a minute, then go ahead try your camera.
toylee1992 said:
Do a fresh installation of ROM and let it settle for 5mins. Then reboot your phone and let it settle for a minute, then go ahead try your camera.
Click to expand...
Click to collapse
Tried again it starts working for a day and then again same thing
Dnt knw why this is hapening I did clean my internal staorage format my phn the did a clean instal it works for a day then gain stops now going to reinstal for 3rd time n last time
Sent from My Sony Xperia S using Tapatalk Pro
kamransaeed15 said:
Tried again it starts working for a day and then again same thing
Dnt knw why this is hapening I did clean my internal staorage format my phn the did a clean instal it works for a day then gain stops now going to reinstal for 3rd time n last time
Sent from My Sony Xperia S using Tapatalk Pro
Click to expand...
Click to collapse
What ROM and Kernel are you using when the camera starts malfunctioning? Do you try other ROM base .96?
Curently I am using stock .96 rom nothing custom
Sent from My Sony Xperia S using Tapatalk Pro
kamransaeed15 said:
Curently I am using stock .96 rom nothing custom
Sent from My Sony Xperia S using Tapatalk Pro
Click to expand...
Click to collapse
Try to flash this in recovery Advance stock camera from niaboc79 http://www.mediafire.com/download/awfybmc8ay1dlpm/Advanced_Stock_Camera.zip
Ok downloading it bt dnt have any recovery instaled every thing stock .just unlocked my boot loader
Sent from My Sony Xperia S using Tapatalk Pro
kamransaeed15 said:
Ok downloading it bt dnt have any recovery instaled every thing stock .just unlocked my boot loader
Sent from My Sony Xperia S using Tapatalk Pro
Click to expand...
Click to collapse
You have to install recovery like CMW or TWRP so you can able to flash that camera MOD.
I just tried app flash gordon to flash I am nt sure if it flashed the camera mod bcz it took just 2 sec to do operatin and then said reboot ur device did reboot.reboot hapens normal and when I open camera it works
Now see if it dnt stops again soon also not sure if the file has been flashed bcz of just 2 sec proces
Sent from My Sony Xperia S using Tapatalk Pro
kamransaeed15 said:
I just tried app flash gordon to flash I am nt sure if it flashed the camera mod bcz it took just 2 sec to do operatin and then said reboot ur device did reboot.reboot hapens normal and when I open camera it works
Now see if it dnt stops again soon also not sure if the file has been flashed bcz of just 2 sec proces
Sent from My Sony Xperia S using Tapatalk Pro
Click to expand...
Click to collapse
I'm not a user of Flash Gordon but if not working again, you need to flash it in recovery like CWM or TWRP, clear cache and dalvic and flash the camera.
Related
Hello, I got my xperia play a couple of days ago and unlocked the bootloaders for it today, It was on 2.3.3 and some old firmware, to my stupidity I installed the KA13 Rom and doomlord kernel, without first updating the firmware.
So now when i turn it on it buzzes and hangs on the sony ericcson logo, any help would be greatly appreciated!
deethebee said:
Hello, I got my xperia play a couple of days ago and unlocked the bootloaders for it today, It was on 2.3.3 and some old firmware, to my stupidity I installed the KA13 Rom and doomlord kernel, without first updating the firmware.
So now when i turn it on it buzzes and hangs on the sony ericcson logo, any help would be greatly appreciated!
Click to expand...
Click to collapse
Try a different kernel/ROM combination.
Pax
PS. you're not bricked, you're stuck in a bootloop.
Sent from my R800x using Tapatalk 2
paxChristos said:
Try a different kernel/ROM combination.
Pax
PS. you're not bricked, you're stuck in a bootloop.
Sent from my R800x using Tapatalk 2
Click to expand...
Click to collapse
Any reccomendations? And thanks btw.
deethebee said:
Any reccomendations? And thanks btw.
Click to expand...
Click to collapse
I'm kinda biased, but you could try either the CM9 or cna I maintain (cna = codename Android, and requires a install ( & running) CM9 before you run it)
Sent from my R800x using Tapatalk 2
deethebee said:
Hello, I got my xperia play a couple of days ago and unlocked the bootloaders for it today, It was on 2.3.3 and some old firmware, to my stupidity I installed the KA13 Rom and doomlord kernel, without first updating the firmware.
So now when i turn it on it buzzes and hangs on the sony ericcson logo, any help would be greatly appreciated!
Click to expand...
Click to collapse
does it comes out with doomlord logo first , if doomlord kernel u just have to push back button when blue led light come out , and you start entering recovery mode , if not you just have to flash to original firmware again.
here the website for stock firmware http://www.xperiagamer.com/XXX-Zone/Stock-Roms/ , gudluck bro
TessarVarim said:
does it comes out with doomlord logo first , if doomlord kernel u just have to push back button when blue led light come out , and you start entering recovery mode , if not you just have to flash to original firmware again.
here the website for stock firmware, gudluck bro
Click to expand...
Click to collapse
Thanks i got it all working
you could have just used flashtool, but good that you've got it working
ttiimm said:
you could have just used flashtool, but good that you've got it working
Click to expand...
Click to collapse
Yeah that's what i used. Now i have another problem though, I went ahead and installed 2.3.4(.64) r800i firmware onto the phone but i cant get wifi in any of the kernel/rom combo's i use even stock/stock wont work. And yes I've tried the doom fixer. Also it shows that i have no baseband, but I'm not using this as a phone only as a portable gaming device
deethebee said:
Yeah that's what i used. Now i have another problem though, I went ahead and installed 2.3.4(.64) r800i firmware onto the phone but i cant get wifi in any of the kernel/rom combo's i use even stock/stock wont work. And yes I've tried the doom fixer. Also it shows that i have no baseband, but I'm not using this as a phone only as a portable gaming device
Click to expand...
Click to collapse
why you use r800i firmware instead of r800x firmware , maybe u flash the wrong firmware
TessarVarim said:
why you use r800i firmware instead of r800x firmware , maybe u flash the wrong firmware
Click to expand...
Click to collapse
If you try to actually flash the wrong firmware with flashtool it will error out in the beginning (I tried them all in multiple Uk attempts)
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
deethebee said:
Yeah that's what i used. Now i have another problem though, I went ahead and installed 2.3.4(.64) r800i firmware onto the phone but i cant get wifi in any of the kernel/rom combo's i use even stock/stock wont work. And yes I've tried the doom fixer. Also it shows that i have no baseband, but I'm not using this as a phone only as a portable gaming device
Click to expand...
Click to collapse
Ahh no baseband, the story of my life right there...
There was made a patch for making ANT+ work on the 3.1 version of the rom but not for version 3.2.
I've also tried to restore the three ANT files necessary with TB from my previous official 4.0.4 rom but only 2 files can be restored, AntHalService 4.0.4 UL5_3w can not be restored. I use an ANT hear rate monitor in combo with the endomondo app to log my heart rate while running/biking.
This was asked before by somebody else in the developement thread of the rom but there was no reply or solution given, so I try it again asking if it is possible to make a patch i can flash to get ANT working in jjhybrid.
There may not be many people using this feature but those who did or do will be very thankfull because ANT+ radio heart rate monitors aren't cheap to buy.
Thanks
Greets dAHAk
Flash That MOd cAgain Again in JJ 3.2.
it Will WOrk
ArcMan09 said:
Flash That MOd cAgain Again in JJ 3.2.
it Will WOrk
Click to expand...
Click to collapse
Ok i will try to "flash" the patch for v3.1 but i would like to know how.(locked bl) So i flashed before using flashtool but that were always .ftf files or like jjhybrid itself files it recognised as whole in flashtool but the ant+ patch consists from 2 maps (meta-inf and systems) so dunno how to get them on my arc s?
help much appreciated
dAHAk
dahakske said:
Ok i will try to "flash" the patch for v3.1 but i would like to know how.(locked bl) So i flashed before using flashtool but that were always .ftf files or like jjhybrid itself files it recognised as whole in flashtool but the ant+ patch consists from 2 maps (meta-inf and systems) so dunno how to get them on my arc s?
help much appreciated
dAHAk
Click to expand...
Click to collapse
Just install Zip From SD Card Via Recovey.
Sent from my LT18i using Tapatalk 2
ArcMan09 said:
Just install Zip From SD Card Via Recovey.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
okey, like that, yes i've got the recovery for locked bootloaders(x-parts), will install it thru there then, great.
dAHAk
dahakske said:
okey, like that, yes i've got the recovery for locked bootloaders(x-parts), will install it thru there then, great.
dAHAk
Click to expand...
Click to collapse
i installed the zip but it isnt working, the 3 ant+ services are running but my monitor cannot be detected and there isnt also a notification icon in the bar. in the official sony rom you need to enable ant+ in a sony app so maybe this is holding it back from functioning properly
use Factory Reset and Wipe Davlik cache.
And Flash the Rom.
finally bricked my first device lol
can someone here help me out?
(r800at 2011 locked bootloader)
xperia play was rooted via the super one click and i flashed what i think was clock work mod recovery using version 7 of the auto installer app
after about a week of not being about to get into recovery by pressing buttons, i managed to get into recovery by using the volume down key
once i got into a recovery ( had blue text ) i full wiped ( twice ) and flashed Xperia Ice Cream Pureness and the black theme. after the installation was complete i rebooted and after showing the "sony ecricsson" the screen goes blank ( stays on ) and will only tun off when i pull the battery
no longer shows blue light when starting up and i cant get back into recovery mode
tried unbricking via flashtools but it won't recognize my device ( though it has before )
any advice?
any help will greatly be appreciated , thanks in advance
Well if you cleared your data then the recovery was probably wiped since you have a locked bootloader.... You need to update the drivers in order to flash the ftf for your model...
Sent from my R800x
Lordomn said:
Well if you cleared your data then the recovery was probably wiped since you have a locked bootloader.... You need to update the drivers in order to flash the ftf for your model...
Sent from my R800x
Click to expand...
Click to collapse
thanks for the reply
is there a guide anywhere that can help me do that?
superone click ( i thought ) installed all the drivers i needed
NovaxxBite said:
thanks for the reply
is there a guide anywhere that can help me do that?
superone click ( i thought ) installed all the drivers i needed
Click to expand...
Click to collapse
Flash this :
http://www.mediafire.com/?6v7ybyyik6g3si4
Or this :
http://www.mediafire.com/?qqvtl484nlz3gq0
Use Flashtool :
http://androxyde.github.com/
How to use flashtool is nicely explained on the website but I think it should be self explanatory for what to do.
You can also try flashing the Neo L ftf and install ICS Pureness over that if you really want an Ice Cream Sandwich rom. (Providing you can enter recovery because you have a locked bootloader)
( double posting , sorry)
sewer56lol said:
Flash this :
http://www.mediafire.com/?6v7ybyyik6g3si4
Or this :
http://www.mediafire.com/?qqvtl484nlz3gq0
Use Flashtool :
http://androxyde.github.com/
How to use flashtool is nicely explained on the website but I think it should be self explanatory for what to do.
You can also try flashing the Neo L ftf and install ICS Pureness over that if you really want an Ice Cream Sandwich rom. (Providing you can enter recovery because you have a locked bootloader)
Click to expand...
Click to collapse
NovaxxBite said:
thanks, i'l try now and report back :good:
Click to expand...
Click to collapse
thanks! worked perfectly
so if i flash the neo L ftf, how would i install ics pureness? cwm ?
and ( installing any ROM ) should i NOT wipe before flashing? since my bootloader is locked?
kindav confused lol, but thanks for the help
NovaxxBite said:
thanks! worked perfectly
so if i flash the neo L ftf, how would i install ics pureness? cwm ?
and ( installing any ROM ) should i NOT wipe before flashing? since my bootloader is locked?
kindav confused lol, but thanks for the help
Click to expand...
Click to collapse
If you want to use an ICS Rom on locked bootloader you have to flash a Neo V ftf then use an app like X-Parts or use RecoverX to gain recovery and then you can install Pureness as a flashable zip.
As far as I know people that flashed Neo L ftf had an Upside Down Camera and Gamepad obviously didn't work however Gamepad should work on a modified Rom (Camera might be a kernel thing - I didn't try this but I can almost guarantee will work) no other issues have ever been reported.
It is important to note that depending on how your phone/country communitcates (GSM/CDMA) might impact on your connectivity personally I don't know if AT&T is CDMA or GSM because they seem to use both.
sewer56lol said:
If you want to use an ICS Rom on locked bootloader you have to flash a Neo V ftf then use an app like X-Parts or use RecoverX to gain recovery and then you can install Pureness as a flashable zip.
As far as I know people that flashed Neo L ftf had an Upside Down Camera and Gamepad obviously didn't work however Gamepad should work on a modified Rom (Camera might be a kernel thing - I didn't try this but I can almost guarantee will work) no other issues have ever been reported.
It is important to note that depending on how your phone/country communitcates (GSM/CDMA) might impact on your connectivity personally I don't know if AT&T is CDMA or GSM because they seem to use both.
Click to expand...
Click to collapse
okay thanks
also , i've read in forums that the at&t for this phone is GSM ( or at least in north america )
so, flashed a Neo V ftf via flashtools and got a brick ( recovered back to stock xperia now )
am i missing something?
does someone have a link to a Neo V ftf i can use?
Not neo V the Neo L (because it comes with sake hardware preset)
Sent from my R800i using xda app-developers app
Edit : Sorry for my mistake earlier.
sewer56lol said:
Not neo V the Neo L (because it comes with sake hardware preset)
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
great, works
im now on ICS :highfive:
NovaxxBite said:
great, works
im now on ICS :highfive:
Click to expand...
Click to collapse
So simple yet nobody tried that yet
This is ICS on a locked bootloader.
Should I maybe write a Tutorial?
Sent from my R800i using xda app-developers app
So guys, today I installed slim bean 2.5 on my xperia s using CWM and after installing pressed reboot now, but my phone never powered back on so pressed the power button again and got a light vibration but phone did not come back on.
I held down the power + volume up button till i got 3 vibrations but still phone did not restart
When i connect phone to charger I do not see any notification light.
Guys this phone is my brothers so really nervous about it, please help me out, thanks in advance
Flashtool
Try flashing a stock firmware in Flashtool, good luck.
Now downloading the stock firmware using sony update service, will update about the situation when it is done
abirjin said:
Now downloading the stock firmware using sony update service, will update about the situation when it is done
Click to expand...
Click to collapse
Update Service with an unlocked bootloader is a bad idea.
Try this.
http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
Official flashtool to go back to stock rom.
And as the guy above told you, SEUS on unlocked bootloader is a bad thing.
Hi. I have same problem.
Just flashed FreeXperia rom and gapps. Phone wont to power up. Just geting blue led or green.
Any clue? My bootloader is locked.
tried to use official xperia update tool but it wont to recognise my phone (maybe i doing sth wrong :/)
sabbath88 said:
Hi. I have same problem.
Just flashed FreeXperia rom and gapps. Phone wont to power up. Just geting blue led or green.
Any clue? My bootloader is locked.
tried to use official xperia update tool but it wont to recognise my phone (maybe i doing sth wrong :/)
Click to expand...
Click to collapse
How you install CM on locked bl? It's impossible.
Sent from my LT26i using xda developers-app
Vaith said:
How you install CM on locked bl? It's impossible.
Sent from my LT26i using xda developers-app
Click to expand...
Click to collapse
No it's not. If you have root you can push cwm via adb.
Sent from my LT26i using Tapatalk 2
Sirence said:
No it's not. If you have root you can push cwm via adb.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I'm talking about Cyanogen Mod (CM) not CWM. Next time read carefully.
Sent from my LT26i using xda developers-app
Try this..
Dude,
As the others have said you cannot install FXP CM10 on a device with a locked bootloader.
As such your device will not boot, your options are to either.
1) use flashtool to flash a stock rom - instuctions how to use flashtool can be found on the forum
2) use Sony update service to flash back to stock - This is the easier option, but all your data will be wiped.
Once the device will boot up, if you still want to use FXP roms then unlock the bootloader first, or try a rom for locked bootloaders.
Either of the above should work for you.
sudd1976 said:
Dude,
As the others have said you cannot install FXP CM10 on a device with a locked bootloader.
As such your device will not boot, your options are to either.
1) use flashtool to flash a stock rom - instuctions how to use flashtool can be found on the forum
2) use Sony update service to flash back to stock - This is the easier option, but all your data will be wiped.
Once the device will boot up, if you still want to use FXP roms then unlock the bootloader first, or try a rom for locked bootloaders.
Either of the above should work for you.
Click to expand...
Click to collapse
yea phone works again fine on the stock
At least you show others, do not flash custom ROM if it's only for unlocked bootloader.
If you have locked bootloader you can't flash custom kernel and you will stuck in bootloop.
Sent from my Xperia S using Tapatalk 2
You try use flashtool to flash a stock rom.
sabbath88 said:
Hi. I have same problem.
Just flashed FreeXperia rom and gapps. Phone wont to power up. Just geting blue led or green.
Any clue? My bootloader is locked.
tried to use official xperia update tool but it wont to recognise my phone (maybe i doing sth wrong :/)
Click to expand...
Click to collapse
There is no way to install CM, with a locked BL!
You are phone is probably soft bricked by now...
Take a look at this guide! http://forum.xda-developers.com/showthread.php?t=1849170
It will help you
I couldn't find any threads that are helpful to me.. so i had to post a new one.
I have a Xperia arc with lock bootloader. I flashed the lt18i 4.1.B.0.587 one day and installed Xperia Ultimate HD. I decided to go back to stock rom because UHD didn't have the features I expected.. so i flashed the lt18i ftf again via flashtool.i rooted it and installed CWM. Everything works fine.
Then i tried to restore a backup that was made before i flashed lt18i firmware.( my phone was on lt15i 0.587 stock rom at that time)
I tried to restore it on LT18i firmware to have more free space and it actually succeeded. But when i reboot it to homescreen it's just keep saying "keypad force close". i thought it was because the backup was based on lt15i firmware and it's not compatible with 18i firmware...
so i flashed lt15i .587 firmware but i exclude system because i still wanted to have 420MB space and i thought i should do it in this way ( i didn't know if it works or not) unfortunately, i was wrong and the phone stuck on sony logo.
the story hasn't ended. I flashed the LT15i .587 firmware again and this time the phone booted successfully. I rooted and install CWM as i did before.. i rebooted my phone and when sony logo appeared i kept on pressing volume down key but it couldn't get into CWM and was stuck on sony logo.I had to pull out the battery . After that i booted my phone again without trying to get into CWM and it succeeded. So basically everything works fine except stuck on sony logo when i try to boot in CWM.
I need CWM for installing good mods and backup and all kinds of stuff but i couldn't work it out and couldn't find a thread about it. I don't wanna unlock bootloader as well. Please help !!
p.s sorry for bad English and the story seems too long and a bit confusing... i just wanna make it more detailed...
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
Sent from my Xperia Arc S using xda premium
TheHaso said:
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
actually i did that. I flashed the LT18i ftf again and rooted it and installed CWM as usual. But it didn't work..
Still thx for replying.
Click to expand...
Click to collapse
danielozh said:
TheHaso said:
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
actually i did that. I flashed the LT18i ftf again and rooted it and installed CWM as usual. But it didn't work..
Still thx for replying.
Click to expand...
Click to collapse
Buddy no offense, may I know what prob you are currently facing? I could help you out, but am findin the post confusing
Click to expand...
Click to collapse
danielozh said:
TheHaso said:
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
actually i did that. I flashed the LT18i ftf again and rooted it and installed CWM as usual. But it didn't work..
Still thx for replying.
Click to expand...
Click to collapse
Restore phone using Sony Update Service and install XParts.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
gire.prasad said:
danielozh said:
Buddy no offense, may I know what prob you are currently facing? I could help you out, but am findin the post confusing
Click to expand...
Click to collapse
i can't boot into CWM. when i try to get into CWM, it just stuck on sony logo forever. If i dont try to boot into CWM, then everything works fine.
Click to expand...
Click to collapse
popthosegaskets said:
danielozh said:
Restore phone using Sony Update Service and install XParts.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I don't really think I know how to use SUS and i tried it but it just says no software update. And x-part doesn't work on my phone..i don't why.
Click to expand...
Click to collapse
danielozh said:
popthosegaskets said:
I don't really think I know how to use SUS and i tried it but it just says no software update. And x-part doesn't work on my phone..i don't why.
Click to expand...
Click to collapse
Usually they will ask you if you still want to restore your phone after that,
Click to expand...
Click to collapse
popthosegaskets said:
danielozh said:
Usually they will ask you if you still want to restore your phone after that,
Click to expand...
Click to collapse
still doesn't work...
can someone please help..?
Click to expand...
Click to collapse
danielozh said:
popthosegaskets said:
still doesn't work...
can someone please help..?
Click to expand...
Click to collapse
Your only option is Flashtool if SUS does not work...
Flash the ftf file again, wipe everything and tick the "no final verification" checkbox.
Click to expand...
Click to collapse
popthosegaskets said:
danielozh said:
Your only option is Flashtool if SUS does not work...
Flash the ftf file again, wipe everything and tick the "no final verification" checkbox.
Click to expand...
Click to collapse
Yes i did use flashtool and wipe everything and tick the checkbox. I rooted my phone and install CWM as i did before. It used to work but now it doesn't.
Click to expand...
Click to collapse
danielozh said:
popthosegaskets said:
Yes i did use flashtool and wipe everything and tick the checkbox. I rooted my phone and install CWM as i did before. It used to work but now it doesn't.
Click to expand...
Click to collapse
I have the same problem. Have you come up with a solution?
Click to expand...
Click to collapse
magnifisa said:
danielozh said:
I have the same problem. Have you come up with a solution?
Click to expand...
Click to collapse
No.... BTW,how did you get this problem?
Click to expand...
Click to collapse
Please..I need help... cheers
danielozh said:
Please..I need help... cheers
Click to expand...
Click to collapse
This is really a strange problem indeed! I had the same issue on LB! But mine dint go to CWM and booted directly into device! I tried all sorts of solutions but in vain! At last, I just flashed entirely from the beginning.
1. FTF (Format everything)
2. Root
3. Recovery
And everything is still fine after that!
Whatever you encounter when flashing custom Rom or mods
Go to flashtool and flash back the stock firmware and root and install again .
It always effective
Sent from my LT18i using xda app-developers app
rt235130 said:
Whatever you encounter when flashing custom Rom or mods
Go to flashtool and flash back the stock firmware and root and install again .
It always effective
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
That's exactly what i've done.
I flash the LT18i 4.1.B.0.587 ftf( entire rom) and rooted my phone with E-root, install CWM with cmd... and it works fine if i don't try to boot into CWM. But if i press the volume down button repeatedly when sony logo appears, blue light turns on...the screen gets brighter, and then blue light disappears, and just stuck on it.
rt235130 said:
Whatever you encounter when flashing custom Rom or mods
Go to flashtool and flash back the stock firmware and root and install again .
It always effective
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Well i did. but doesn't work.
danielozh said:
That's exactly what i've done.
I flash the LT18i 4.1.B.0.587 ftf( entire rom) and rooted my phone with E-root, install CWM with cmd... and it works fine if i don't try to boot into CWM. But if i press the volume down button repeatedly when sony logo appears, blue light turns on...the screen gets brighter, and then blue light disappears, and just stuck on it.
Click to expand...
Click to collapse
Why don't you root or install cwm via any other available methods?
gire.prasad said:
Why don't you root or install cwm via any other available methods?
Click to expand...
Click to collapse
i did. x-part didn't work. recoveryx didn't.
About root, i tried to use the method which downgrade the kernel first and then upgrade it later. It worked. But still no CWM.