Hello all, Just bricked my r800x! - Xperia Play Q&A, Help & Troubleshooting

Hello, I got my xperia play a couple of days ago and unlocked the bootloaders for it today, It was on 2.3.3 and some old firmware, to my stupidity I installed the KA13 Rom and doomlord kernel, without first updating the firmware.
So now when i turn it on it buzzes and hangs on the sony ericcson logo, any help would be greatly appreciated!

deethebee said:
Hello, I got my xperia play a couple of days ago and unlocked the bootloaders for it today, It was on 2.3.3 and some old firmware, to my stupidity I installed the KA13 Rom and doomlord kernel, without first updating the firmware.
So now when i turn it on it buzzes and hangs on the sony ericcson logo, any help would be greatly appreciated!
Click to expand...
Click to collapse
Try a different kernel/ROM combination.
Pax
PS. you're not bricked, you're stuck in a bootloop.
Sent from my R800x using Tapatalk 2

paxChristos said:
Try a different kernel/ROM combination.
Pax
PS. you're not bricked, you're stuck in a bootloop.
Sent from my R800x using Tapatalk 2
Click to expand...
Click to collapse
Any reccomendations? And thanks btw.

deethebee said:
Any reccomendations? And thanks btw.
Click to expand...
Click to collapse
I'm kinda biased, but you could try either the CM9 or cna I maintain (cna = codename Android, and requires a install ( & running) CM9 before you run it)
Sent from my R800x using Tapatalk 2

deethebee said:
Hello, I got my xperia play a couple of days ago and unlocked the bootloaders for it today, It was on 2.3.3 and some old firmware, to my stupidity I installed the KA13 Rom and doomlord kernel, without first updating the firmware.
So now when i turn it on it buzzes and hangs on the sony ericcson logo, any help would be greatly appreciated!
Click to expand...
Click to collapse
does it comes out with doomlord logo first , if doomlord kernel u just have to push back button when blue led light come out , and you start entering recovery mode , if not you just have to flash to original firmware again.
here the website for stock firmware http://www.xperiagamer.com/XXX-Zone/Stock-Roms/ , gudluck bro

TessarVarim said:
does it comes out with doomlord logo first , if doomlord kernel u just have to push back button when blue led light come out , and you start entering recovery mode , if not you just have to flash to original firmware again.
here the website for stock firmware, gudluck bro
Click to expand...
Click to collapse
Thanks i got it all working

you could have just used flashtool, but good that you've got it working

ttiimm said:
you could have just used flashtool, but good that you've got it working
Click to expand...
Click to collapse
Yeah that's what i used. Now i have another problem though, I went ahead and installed 2.3.4(.64) r800i firmware onto the phone but i cant get wifi in any of the kernel/rom combo's i use even stock/stock wont work. And yes I've tried the doom fixer. Also it shows that i have no baseband, but I'm not using this as a phone only as a portable gaming device

deethebee said:
Yeah that's what i used. Now i have another problem though, I went ahead and installed 2.3.4(.64) r800i firmware onto the phone but i cant get wifi in any of the kernel/rom combo's i use even stock/stock wont work. And yes I've tried the doom fixer. Also it shows that i have no baseband, but I'm not using this as a phone only as a portable gaming device
Click to expand...
Click to collapse
why you use r800i firmware instead of r800x firmware , maybe u flash the wrong firmware

TessarVarim said:
why you use r800i firmware instead of r800x firmware , maybe u flash the wrong firmware
Click to expand...
Click to collapse
If you try to actually flash the wrong firmware with flashtool it will error out in the beginning (I tried them all in multiple Uk attempts)
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
deethebee said:
Yeah that's what i used. Now i have another problem though, I went ahead and installed 2.3.4(.64) r800i firmware onto the phone but i cant get wifi in any of the kernel/rom combo's i use even stock/stock wont work. And yes I've tried the doom fixer. Also it shows that i have no baseband, but I'm not using this as a phone only as a portable gaming device
Click to expand...
Click to collapse
Ahh no baseband, the story of my life right there...

Related

[Q] How to boot to recovery?

Hey peeps - another annoying n00b question (sorry)
I have the Doom v3 kernel and stock 2.3.3
Just want to know how I can boot into recovery so I can install a ROM zip?
I have tried every combination of buttons on startup including Power then tapping and holding Back and I cant get into recovery mode.
Please help i really want to try the GingerStation rom
Turn device off. When off press the power button once, then start tapping any hardware button untill device boots into recovery. You can also try doomlords xCharge app from the market.
Sorry i havent been very active in the forums recently. I will be updating rom soon with some cool features and a new name
Sent from my R800i using Tapatalk
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Simmo3D said:
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
You have to turn the phone on, when you see the first image of the android on the screen keep tapping the back button, you will get in trust me I had the same problem
Simmo3D said:
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
AFAIK you have to boot into recovery the standard way. Like the person above described. Once you do that CWM creates a directory in /cache called "recovery" then xCharge works fine
OmG it worked.. thanks alot guys!!
Sent from my GT-I9100 using xda premium
hi guys having same problem everything installed ok but wont boot into recovery either way any ideas
brockyneo said:
hi guys having same problem everything installed ok but wont boot into recovery either way any ideas
Click to expand...
Click to collapse
Did you try everything from this thread?
eg. Pushing back/wolume button (or maybe other) when the led lights.
If yes. Try get to it using command or reflash boot.img
Sent using r800i with DoomKernel v10 (1.21ghz)
I have a stock Play, but I'm not good to reboot into recovery....
akira.pwr said:
I have a stock Play, but I'm not good to reboot into recovery....
Click to expand...
Click to collapse
Have you installed CWM?
No, I don't know how to do it...
akira.pwr said:
No, I don't know how to do it...
Click to expand...
Click to collapse
Are you rooted?
If not, do you know how to do that?
No, it's completely stock, I've read I have to flash a file in recovery, I've got it, but I don't know how to reboot in recovery with button combination.
To get cwm, root using doomlords easy toolkit, search development
Then install this app and click install: https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler
After you have installed that, boot on your phone, and when you see the sony ericsson screen, repeatedly tap volume down until you get into cwm
WOW! It's very easy this way, thanks a lot
Another quick question, now bootloader is unlocked?
Can I flash any custom roms like any other device? (flash in recovery mode)
Thanks again.
That way i showed is to install CWM with a LOCKED bootloader.
This will allow you to flash STOCK based roms, no others
This is not unlocking bootloader, just getting CWM
If you want to unlock your bootloader, you have to go to the sony website or pay to unlock it
Oh, so I can't flash CM roms, but I can with stock based, right?
I knew about Sony website, but I though there was other ways to have the bootloader unlocked.
Well, thank you a lot, now I have to find a good stock based rom.
akira.pwr said:
Oh, so I can't flash CM roms, but I can with stock based, right?
I knew about Sony website, but I though there was other ways to have the bootloader unlocked.
Well, thank you a lot, now I have to find a good stock based rom.
Click to expand...
Click to collapse
Yeah!
Before anything, make a nandroid backup!
I have to upgrade to latest fw with flashtool (in Italy we haven't), I'm learning all this night, but most of work is done thanks to you.
akira.pwr said:
I have to upgrade to latest fw with flashtool (in Italy we haven't), I'm learning all this night, but most of work is done thanks to you.
Click to expand...
Click to collapse
Happy to help

[Q] R800x won't boot even after flashing stock firmware

I unlocked the boot loader and I'm assuming the phone automatically updated over night, because now it won't boot, only vibrates. I tried using the flashtool and even though it says it does it successfully, it still won't boot. I found this thread http://forum.xda-developers.com/showthread.php?t=1126358 referenced but the file it links to is not up. Can some one reup the file some where or give me some other advice?
Well does the led flash red 3 times?
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
I am pretty sure your phone can't update automatically:fingers-crossed: with Sony you have to accept the update.Try flashing ftf stock rom found hear http://forum.xda-developers.com/showthread.php?t=1589399 this will bring you back to stock.
Hi just noticed you tried that! Follow the guides on this page http://forum.xda-developers.com/wiki/SE_Xperia_Play I have found them to be useful
Try to flash a kernal in fastboot then a rom,then if you want to go back to stock try that aftet.Get your phone stable first :fingers-crossed:
tallman43 said:
Hi just noticed you tried that! Follow the guides on this page http://forum.xda-developers.com/wiki/SE_Xperia_Play I have found them to be useful
Try to flash a kernal in fastboot then a rom,then if you want to go back to stock try that aftet.Get your phone stable first :fingers-crossed:
Click to expand...
Click to collapse
It only connects to my PC in flash mode. Pressing the search button doesn't do anything anymore :crying:
Rohccoo said:
It only connects to my PC in flash mode. Pressing the search button doesn't do anything anymore :crying:
Click to expand...
Click to collapse
Well if it connects in flash mode then you can use PC companion to repair it
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
Rohccoo said:
It only connects to my PC in flash mode. Pressing the search button doesn't do anything anymore :crying:
Click to expand...
Click to collapse
Whoops! No problem you can boot your phone into fastboot via flashtool/doomlord's fastboot via ADB you don't need to press search button for that.
Rohccoo said:
I unlocked the boot loader and I'm assuming the phone automatically updated over night, because now it won't boot, only vibrates. I tried using the flashtool and even though it says it does it successfully, it still won't boot. I found this thread http://forum.xda-developers.com/showthread.php?t=1126358 referenced but the file it links to is not up. Can some one reup the file some where or give me some other advice?
Click to expand...
Click to collapse
Lock its bl again flash ftf it'll work
Sent from my R800i using xda premium
creative_md said:
Lock its bl again flash ftf it'll work
Sent from my R800i using xda premium
Click to expand...
Click to collapse
You were right, it worked right away. I used the file in in this thread http://forum.xda-developers.com/showthread.php?t=1134334. Thanks guys
Rohccoo said:
You were right, it worked right away. I used the file in in this thread http://forum.xda-developers.com/showthread.php?t=1134334. Thanks guys
Click to expand...
Click to collapse
Ur welcome
Sent from my R800i using xda premium

Need Help with Xperia S

So guys, today I installed slim bean 2.5 on my xperia s using CWM and after installing pressed reboot now, but my phone never powered back on so pressed the power button again and got a light vibration but phone did not come back on.
I held down the power + volume up button till i got 3 vibrations but still phone did not restart
When i connect phone to charger I do not see any notification light.
Guys this phone is my brothers so really nervous about it, please help me out, thanks in advance
Flashtool
Try flashing a stock firmware in Flashtool, good luck.
Now downloading the stock firmware using sony update service, will update about the situation when it is done
abirjin said:
Now downloading the stock firmware using sony update service, will update about the situation when it is done
Click to expand...
Click to collapse
Update Service with an unlocked bootloader is a bad idea.
Try this.
http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
Official flashtool to go back to stock rom.
And as the guy above told you, SEUS on unlocked bootloader is a bad thing.
Hi. I have same problem.
Just flashed FreeXperia rom and gapps. Phone wont to power up. Just geting blue led or green.
Any clue? My bootloader is locked.
tried to use official xperia update tool but it wont to recognise my phone (maybe i doing sth wrong :/)
sabbath88 said:
Hi. I have same problem.
Just flashed FreeXperia rom and gapps. Phone wont to power up. Just geting blue led or green.
Any clue? My bootloader is locked.
tried to use official xperia update tool but it wont to recognise my phone (maybe i doing sth wrong :/)
Click to expand...
Click to collapse
How you install CM on locked bl? It's impossible.
Sent from my LT26i using xda developers-app
Vaith said:
How you install CM on locked bl? It's impossible.
Sent from my LT26i using xda developers-app
Click to expand...
Click to collapse
No it's not. If you have root you can push cwm via adb.
Sent from my LT26i using Tapatalk 2
Sirence said:
No it's not. If you have root you can push cwm via adb.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I'm talking about Cyanogen Mod (CM) not CWM. Next time read carefully.
Sent from my LT26i using xda developers-app
Try this..
Dude,
As the others have said you cannot install FXP CM10 on a device with a locked bootloader.
As such your device will not boot, your options are to either.
1) use flashtool to flash a stock rom - instuctions how to use flashtool can be found on the forum
2) use Sony update service to flash back to stock - This is the easier option, but all your data will be wiped.
Once the device will boot up, if you still want to use FXP roms then unlock the bootloader first, or try a rom for locked bootloaders.
Either of the above should work for you.
sudd1976 said:
Dude,
As the others have said you cannot install FXP CM10 on a device with a locked bootloader.
As such your device will not boot, your options are to either.
1) use flashtool to flash a stock rom - instuctions how to use flashtool can be found on the forum
2) use Sony update service to flash back to stock - This is the easier option, but all your data will be wiped.
Once the device will boot up, if you still want to use FXP roms then unlock the bootloader first, or try a rom for locked bootloaders.
Either of the above should work for you.
Click to expand...
Click to collapse
yea phone works again fine on the stock
At least you show others, do not flash custom ROM if it's only for unlocked bootloader.
If you have locked bootloader you can't flash custom kernel and you will stuck in bootloop.
Sent from my Xperia S using Tapatalk 2
You try use flashtool to flash a stock rom.
sabbath88 said:
Hi. I have same problem.
Just flashed FreeXperia rom and gapps. Phone wont to power up. Just geting blue led or green.
Any clue? My bootloader is locked.
tried to use official xperia update tool but it wont to recognise my phone (maybe i doing sth wrong :/)
Click to expand...
Click to collapse
There is no way to install CM, with a locked BL!
You are phone is probably soft bricked by now...
Take a look at this guide! http://forum.xda-developers.com/showthread.php?t=1849170
It will help you

[Q] [Help!] Stuck on sony logo and cannot boot into CWM

I couldn't find any threads that are helpful to me.. so i had to post a new one.
I have a Xperia arc with lock bootloader. I flashed the lt18i 4.1.B.0.587 one day and installed Xperia Ultimate HD. I decided to go back to stock rom because UHD didn't have the features I expected.. so i flashed the lt18i ftf again via flashtool.i rooted it and installed CWM. Everything works fine.
Then i tried to restore a backup that was made before i flashed lt18i firmware.( my phone was on lt15i 0.587 stock rom at that time)
I tried to restore it on LT18i firmware to have more free space and it actually succeeded. But when i reboot it to homescreen it's just keep saying "keypad force close". i thought it was because the backup was based on lt15i firmware and it's not compatible with 18i firmware...
so i flashed lt15i .587 firmware but i exclude system because i still wanted to have 420MB space and i thought i should do it in this way ( i didn't know if it works or not) unfortunately, i was wrong and the phone stuck on sony logo.
the story hasn't ended. I flashed the LT15i .587 firmware again and this time the phone booted successfully. I rooted and install CWM as i did before.. i rebooted my phone and when sony logo appeared i kept on pressing volume down key but it couldn't get into CWM and was stuck on sony logo.I had to pull out the battery . After that i booted my phone again without trying to get into CWM and it succeeded. So basically everything works fine except stuck on sony logo when i try to boot in CWM.
I need CWM for installing good mods and backup and all kinds of stuff but i couldn't work it out and couldn't find a thread about it. I don't wanna unlock bootloader as well. Please help !!
p.s sorry for bad English and the story seems too long and a bit confusing... i just wanna make it more detailed...
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
Sent from my Xperia Arc S using xda premium
TheHaso said:
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
actually i did that. I flashed the LT18i ftf again and rooted it and installed CWM as usual. But it didn't work..
Still thx for replying.
Click to expand...
Click to collapse
danielozh said:
TheHaso said:
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
actually i did that. I flashed the LT18i ftf again and rooted it and installed CWM as usual. But it didn't work..
Still thx for replying.
Click to expand...
Click to collapse
Buddy no offense, may I know what prob you are currently facing? I could help you out, but am findin the post confusing
Click to expand...
Click to collapse
danielozh said:
TheHaso said:
Dude, at the aame time youre flashing kernel. Thats the issue. Just flash lt18 ftf and stick with it. It should work fine. Dont revert back to a lt15 backup, because of kernel incompability.
actually i did that. I flashed the LT18i ftf again and rooted it and installed CWM as usual. But it didn't work..
Still thx for replying.
Click to expand...
Click to collapse
Restore phone using Sony Update Service and install XParts.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
gire.prasad said:
danielozh said:
Buddy no offense, may I know what prob you are currently facing? I could help you out, but am findin the post confusing
Click to expand...
Click to collapse
i can't boot into CWM. when i try to get into CWM, it just stuck on sony logo forever. If i dont try to boot into CWM, then everything works fine.
Click to expand...
Click to collapse
popthosegaskets said:
danielozh said:
Restore phone using Sony Update Service and install XParts.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I don't really think I know how to use SUS and i tried it but it just says no software update. And x-part doesn't work on my phone..i don't why.
Click to expand...
Click to collapse
danielozh said:
popthosegaskets said:
I don't really think I know how to use SUS and i tried it but it just says no software update. And x-part doesn't work on my phone..i don't why.
Click to expand...
Click to collapse
Usually they will ask you if you still want to restore your phone after that,
Click to expand...
Click to collapse
popthosegaskets said:
danielozh said:
Usually they will ask you if you still want to restore your phone after that,
Click to expand...
Click to collapse
still doesn't work...
can someone please help..?
Click to expand...
Click to collapse
danielozh said:
popthosegaskets said:
still doesn't work...
can someone please help..?
Click to expand...
Click to collapse
Your only option is Flashtool if SUS does not work...
Flash the ftf file again, wipe everything and tick the "no final verification" checkbox.
Click to expand...
Click to collapse
popthosegaskets said:
danielozh said:
Your only option is Flashtool if SUS does not work...
Flash the ftf file again, wipe everything and tick the "no final verification" checkbox.
Click to expand...
Click to collapse
Yes i did use flashtool and wipe everything and tick the checkbox. I rooted my phone and install CWM as i did before. It used to work but now it doesn't.
Click to expand...
Click to collapse
danielozh said:
popthosegaskets said:
Yes i did use flashtool and wipe everything and tick the checkbox. I rooted my phone and install CWM as i did before. It used to work but now it doesn't.
Click to expand...
Click to collapse
I have the same problem. Have you come up with a solution?
Click to expand...
Click to collapse
magnifisa said:
danielozh said:
I have the same problem. Have you come up with a solution?
Click to expand...
Click to collapse
No.... BTW,how did you get this problem?
Click to expand...
Click to collapse
Please..I need help... cheers
danielozh said:
Please..I need help... cheers
Click to expand...
Click to collapse
This is really a strange problem indeed! I had the same issue on LB! But mine dint go to CWM and booted directly into device! I tried all sorts of solutions but in vain! At last, I just flashed entirely from the beginning.
1. FTF (Format everything)
2. Root
3. Recovery
And everything is still fine after that!
Whatever you encounter when flashing custom Rom or mods
Go to flashtool and flash back the stock firmware and root and install again .
It always effective
Sent from my LT18i using xda app-developers app
rt235130 said:
Whatever you encounter when flashing custom Rom or mods
Go to flashtool and flash back the stock firmware and root and install again .
It always effective
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
That's exactly what i've done.
I flash the LT18i 4.1.B.0.587 ftf( entire rom) and rooted my phone with E-root, install CWM with cmd... and it works fine if i don't try to boot into CWM. But if i press the volume down button repeatedly when sony logo appears, blue light turns on...the screen gets brighter, and then blue light disappears, and just stuck on it.
rt235130 said:
Whatever you encounter when flashing custom Rom or mods
Go to flashtool and flash back the stock firmware and root and install again .
It always effective
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Well i did. but doesn't work.
danielozh said:
That's exactly what i've done.
I flash the LT18i 4.1.B.0.587 ftf( entire rom) and rooted my phone with E-root, install CWM with cmd... and it works fine if i don't try to boot into CWM. But if i press the volume down button repeatedly when sony logo appears, blue light turns on...the screen gets brighter, and then blue light disappears, and just stuck on it.
Click to expand...
Click to collapse
Why don't you root or install cwm via any other available methods?
gire.prasad said:
Why don't you root or install cwm via any other available methods?
Click to expand...
Click to collapse
i did. x-part didn't work. recoveryx didn't.
About root, i tried to use the method which downgrade the kernel first and then upgrade it later. It worked. But still no CWM.

[Q] Want to root and install R800a, very lost.

Hi guys, as the title said, I want to root my new Xperia Play R800a, and I am very lost right now. Ultimately, my goal is to install Xperia NXT 2r1. I think that since I have the r800a version, I am not able unlock the bootloader, so I am ok with not having a custom kernel.
But the problem is, I'm totally lost right now. Could anyone show me a guide or something to what I'm supposed to do to start? That's all I'm asking.
What I HAVE done is downloaded everything they asked for me to download in the post, and have installed flashtools, but whenever I try flashing the firmware 4.0.2 enhanced, I am not able to do so. It is just stuck on a screen where it tells me to go to fastboot mode, but I go to fastboot mode, and for some reason it isn't recognized. (I know it's fastboot because the power button is glowing blue.) I think a driver might be installed incorrectly, but I'm not sure how to install it correctly after.
I'm sorry if my post isn't that helpful, I'll add any more information if you guys want me too.
Thanks in advance.
fishvtt said:
Hi guys, as the title said, I want to root my new Xperia Play R800a, and I am very lost right now. Ultimately, my goal is to install Xperia NXT 2r1. I think that since I have the r800a version, I am not able unlock the bootloader, so I am ok with not having a custom kernel.
But the problem is, I'm totally lost right now. Could anyone show me a guide or something to what I'm supposed to do to start? That's all I'm asking.
What I HAVE done is downloaded everything they asked for me to download in the post, and have installed flashtools, but whenever I try flashing the firmware 4.0.2 enhanced, I am not able to do so. It is just stuck on a screen where it tells me to go to fastboot mode, but I go to fastboot mode, and for some reason it isn't recognized. (I know it's fastboot because the power button is glowing blue.) I think a driver might be installed incorrectly, but I'm not sure how to install it correctly after.
I'm sorry if my post isn't that helpful, I'll add any more information if you guys want me too.
Thanks in advance.
Click to expand...
Click to collapse
for flashing a firmware u should go to flashmode u should turn off the phone then press and hold back button and connect ur usb(the power button led should turn to green)
raminta said:
for flashing a firmware u should go to flashmode u should turn off the phone then press and hold back button and connect ur usb(the power button led should turn to green)
Click to expand...
Click to collapse
Thank you, I actually did that right after. What's wrong now though, is that I got it flashed, but If i try to root it, nothing happens. I press the button and there is no response. Any solutions?
Thanks in advance.
fishvtt said:
Thank you, I actually did that right after. What's wrong now though, is that I got it flashed, but If i try to root it, nothing happens. I press the button and there is no response. Any solutions?
Thanks in advance.
Click to expand...
Click to collapse
Maybe the firmware is the problem
Which version did u flash???
Sent from my R800i using xda premium
raminta said:
Maybe the firmware is the problem
Which version did u flash???
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Sorry for the late response -
I flashed Firmware 4.0.2.A.0.58 Enhanced, the one that they told me to flash in the guide.
I did notice however, that it said that it was for r800i. I just assumed it was universal. Is there a specific firmware I should be flashing for r800a?
fishvtt said:
Sorry for the late response -
I flashed Firmware 4.0.2.A.0.58 Enhanced, the one that they told me to flash in the guide.
I did notice however, that it said that it was for r800i. I just assumed it was universal. Is there a specific firmware I should be flashing for r800a?
Click to expand...
Click to collapse
Yes u can find it here:
http://forum.xda-developers.com/showthread.php?p=40288690
At "official firmwares -> R800a"
Sent from my R800i using xda premium
raminta said:
Yes u can find it here:
http://forum.xda-developers.com/showthread.php?p=40288690
At "official firmwares -> R800a"
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks for the response!
I went to that link and downloaded and flashed R800a_4.0.2.A.0.79.ftfwith vendor partition NEWEST FTF, but the same thing happens when I try to root. It's like the button is unresponsive. Is there a specific ftf I was supposed to flash?
Alright found out the problem. Apparently there are two versions of flashtool. One version doesn't work while the other does. I honestly don't know what the difference is. But for other people who might be facing the same problem, if your flashtool has only three icons, Flash, Root, and check for SU permissions I think (it looks like a key), then you have the wrong version. Your flashtool should have 7 icons.
Doesn't Matter
fishvtt said:
Sorry for the late response -
I flashed Firmware 4.0.2.A.0.58 Enhanced, the one that they told me to flash in the guide.
I did notice however, that it said that it was for r800i. I just assumed it was universal. Is there a specific firmware I should be flashing for r800a?
Click to expand...
Click to collapse
The R800a/at and the R800i have the same hardware all around
SubjectSigma said:
The R800a/at and the R800i have the same hardware all around
Click to expand...
Click to collapse
Oh yes, I found that out a bit later. The problem was lying in the flashtools I was using. Once I got the right flashtools, I reflashed the previous firmware rooted it, installed the rom, and it all worked perfectly.

Categories

Resources