[Q] Wrongly selected recovery without sd then blackscreen - Wildfire Q&A, Help & Troubleshooting

DearS,
I'm sorry if this has already been answered I just can't find it.
At the last time I want to upgrade my Wildfire, I try the Hboot method (Hold vol - and power) and I got the Hboot on, after wipe all, restore to factory and recovery, at same time i saw the sdcard at the desk, i haven't put it into the BUZZ ? I try to remove the battery. and re-install the sd & battery. After that...
When I power on / hold volume + and power on / hold volume - and power on ……also get nothing.
The wildfire black screen after that
Is there anything that can be done to save my Wildfire?
Thanks in advance for any help!
some more info:
without root & s-off
hk stock rom
seem 2.37 i forget
work correct before this problem

It's volume down with power, to go on the hboot.Try again, that should work.
Sent from my HTC Wildfire using xda premium

Pator57 said:
It's volume down with power, to go on the hboot.Try again, that should work.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Sorry not work!

suiyin said:
DearS,
I'm sorry if this has already been answered I just can't find it.
At the last time I want to upgrade my Wildfire, I try the Hboot method (Hold vol - and power) and I got the Hboot on, after wipe all, restore to factory and recovery, at same time i saw the sdcard at the desk, i haven't put it into the BUZZ ? I try to remove the battery. and re-install the sd & battery. After that...
When I power on / hold volume + and power on / hold volume - and power on ……also get nothing.
The wildfire black screen after that
Is there anything that can be done to save my Wildfire?
Thanks in advance for any help!
some more info:
without root & s-off
hk stock rom
seem 2.37 i forget
work correct before this problem
Click to expand...
Click to collapse
So you were doing an update from hboot, or it was performing a factory reset of the device and you pulled the battery out mid process?
That will never end well, you may well have hard bricked your phone pal. If you plug it in to charge does the led come on?
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

heavy_metal_man said:
So you were doing an update from hboot, or it was performing a factory reset of the device and you pulled the battery out mid process?
That will never end well, you may well have hard bricked your phone pal. If you plug it in to charge does the led come on?
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Click to expand...
Click to collapse
LED still off, when connecting charger.

suiyin said:
LED still off, when connecting charger.
Click to expand...
Click to collapse
Ok, your last attempt should be plug it into the pc, and if you get no responses when trying to power on then you have hard bricked your phone and it cannot be repaired without a jtag, and even then it will still probably not help. Sorry pal :/
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

heavy_metal_man said:
Ok, your last attempt should be plug it into the pc, and if you get no responses when trying to power on then you have hard bricked your phone and it cannot be repaired without a jtag, and even then it will still probably not help. Sorry pal :/
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Click to expand...
Click to collapse
no response when connect to pc with/without press the power button, so i need the jtag ? how to make the jtag cable and the connect point of the mobile, also any software i need when use jtag?

suiyin said:
no response when connect to pc with/without press the power button, so i need the jtag ? how to make the jtag cable and the connect point of the mobile, also any software i need when use jtag?
Click to expand...
Click to collapse
A JTAG is a hardware device that you would need to solder to the motherboard of your device, since the main ones are £100+ your probably better off buying a new phone and not a JTAG, but should you want to try anyway you should Google for a riffbox pal.
Sent from my Nexus 7 using Tapatalk 4

heavy_metal_man said:
A JTAG is a hardware device that you would need to solder to the motherboard of your device, since the main ones are £100+ your probably better off buying a new phone and not a JTAG, but should you want to try anyway you should Google for a riffbox pal.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
? Android mobile jtag not same with router jtag?? router jtag just need £1!

suiyin said:
? Android mobile jtag not same with router jtag?? router jtag just need £1!
Click to expand...
Click to collapse
Nope, same concept but different hardware pal. People sell them as kits to do many types of phones, I think the riffbox supports 50+. You can't just buy for one phone. Tbh it's probably possible to wire the phone to the pc and try to connect to it via ports, I believe the jtag simplifies this idea, but without the software or know how your pretty stuffed :/ sorry dude.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2

heavy_metal_man said:
Nope, same concept but different hardware pal. People sell them as kits to do many types of phones, I think the riffbox supports 50+. You can't just buy for one phone. Tbh it's probably possible to wire the phone to the pc and try to connect to it via ports, I believe the jtag simplifies this idea, but without the software or know how your pretty stuffed :/ sorry dude.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Click to expand...
Click to collapse
Found someone say can use the cheap cable to reload the bootloader to O2 XDA stealth in Chinese.
http://hi.baidu.com/cross/item/bfd2325792ecb2dcd48bac83

suiyin said:
Found someone say can use the cheap cable to reload the bootloader to O2 XDA stealth in Chinese.
http://hi.baidu.com/cross/item/bfd2325792ecb2dcd48bac83
Click to expand...
Click to collapse
Yeah, that's the manual way to JTAG a phone, but without knowing the correct cables you would need from the com port, what contacts on the mother board need to be used or any software to do it your going to struggle pal. Again, I'm not saying its not possible for cheaper, I'm saying your going to really really struggle.
Sent from my Nexus 7 using Tapatalk 4

heavy_metal_man said:
Yeah, that's the manual way to JTAG a phone, but without knowing the correct cables you would need from the com port, what contacts on the mother board need to be used or any software to do it your going to struggle pal. Again, I'm not saying its not possible for cheaper, I'm saying your going to really really struggle.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I think thats use printer port, also I know the JTAG of the PC printer port site, just need to know the G8 JTAG pinout.

well unfortunately i cannot help you there pal :/

Related

[Q] Bricked G2

First off let me just say, I already know this is most likely a full brick with no chance of recovery.
Anyway, when my sister got a G2 a while back I perm-rooted and s-off'd it for her. I later flashed the CM 6 RC and that's what she's been on this whole time.
Apparently her new boyfriend is "tech savvy" and has the same phone, so he asked if she wanted to be updated to CM 7 and gave it a shot without letting me know first.
He bricked it, I'm almost certain of it. He said he tried to update it to the newest radio via adb and got an error saying something like "memory is full" or "cant write, no more space" or something like that. He then turned it off so he could "try again", but from then on it wouldn't turn on anymore -__-
I know that a bad radio flash leads to a brick so I'm guessing there's nothing i can do for her, but I've never bricked any of my devices so i thought i'd ask to be sure. As of right now, when i press the power button the screen stays off. No images, no lights, no nothing. I've tried holding the power button + volume down/up and nothing. It simply does nothing. The charging light still turns on if i plug it into the wall charger but nothing happens when i connect it to a computer.
Is there anything I can do to help her besides telling her to get a new one?
Sounds like a brick to me, did he try flashing the ENG. Hboot ? If he screwed something up while doing this the result would be exactly what you are describing.
Sent from my HTC Vision using XDA App
have you tried pulling the battery then re-seating it and booting into recovery?
Also take out battery and hold power as you put battery back in. Worth a shot
Sent from my HTC Vision using XDA App
I say smack it off his head a few times.
If its a brick you might as well use it for some good (Y)
Delivered by Western Union in the rain after 70 Years
Tried connecting the power USB adapter to it?
he has the same phone right... TO ME what i see is... her boyfriend has a new bricked g2... and you sister has a new g2 with CM7 installed on it... so much for tech savvy... if i remenber right the best and only way to flash radio is through fastboot..
ilostchild said:
he has the same phone right... TO ME what i see is... her boyfriend has a new bricked g2... and you sister has a new g2 with CM7 installed on it... so much for tech savvy... if i remenber right the best and only way to flash radio is through fastboot..
Click to expand...
Click to collapse
This guy has it right your sister has a new G2 with cm7 and he has nice expensive paper weight tell him thats what he gets for ****ing with stuff he knows nothing about
My LEDs don't even lit up when I plug it into the wall charger. Into the PC neither. I do get a hardware detected notification though, but Windows 7 isn't able to find the correct driver (for a what's apparently called QHSUSB_DLOAD). I have all HTC and Android drivers installed since I have the Android SDK and HTC Sync+drivers installed.
jark99 said:
Also take out battery and hold power as you put battery back in. Worth a shot
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I never heard of doing this before, what does this do. Note my phone is working, but I don't try thing blindly, so I won't be doing this.
Sent from my HTC Vision using XDA Premium App

[Q] Bricked Desire Z

Hi
I've got Desire Z with latest Visionary rom. Everything worked fine till today. My som played Angry Birds and suddenly phone turned off... I was unable to turn it on - pull & put back battery doesn't work. When I connect charger - nothing, unable to boot, black screen, charging led not working. I connected DZ via usb to my notebook - it found QHSUSB_DLOAD device and nothing more. I read somewhere at xda, that it could be burned motherboard. Any ideas to bring it back to work ?
Greetings - Tom
Hi,
yesterday my phone went to restart. Unfortunately it shows only black screen with phone with red triangle than I pull and put back battery and try to start again. I got only logo htc and nothing more. Than I tried restart phone more times and now it not response to power button. I get only black screen. If I connect tel to pc it found device QHSUSB_DLOAD.
Interesting is that i played Angry Birds few hours before scrash.
Me have same problem with DZ....
SEmp91 said:
Me have same problem with DZ....
Click to expand...
Click to collapse
what playing angry birds and then phone shut off? if you would like more help please give more details
Sent from my HTC Vision using xda premium
I bought this phone yesterday and it was already broken. Phone dont start and if I plugged them to PC it defined as QHSUSB_DLOAD device.
Previous owner said that phone was finally broken (from died memory chip to QHSUSB_DLOAD mode) when it lying on the table with battery.
fried emmc is a prdoblem with certain chips on these phones. do you knoew if it rooted? boot into bootloader (hold volume down while powering on) and write down everything on that screen
Sent from my HTC Vision using xda premium
In QHSUSB_DLOAD mode phone cant boot into bootloader, unfortunately..
I ask previous owner about root, will see what he says
There people solved same problem with sensation but no solution for DZ granted
Phone is s-on without root
unfortunetly if you can access bootloader or recovery there is nothing that can be done other than jtag.
Sent from my HTC Vision using xda premium
bootloader and recovery has no available currently. I know that a long ago..
Do you know how repair via jtag or via qhsusb_dload mode?
SEmp91 said:
bootloader and recovery has no available currently. I know that a long ago..
Do you know how repair via jtag or via qhsusb_dload mode?
Click to expand...
Click to collapse
as far as I know no one has made a way to unbrick with the qhsusb_dload for the vision, I only looked into that project once when I got a doubleshot for my girlfriend, just to see what its all about. I believe there are only a limited number of devices that dexter (I think that's his name) support, the vision not being one of them. also this will only help under certain circumstance. if you have a fried emmc than you can't read or write to it and I don't believe even jtag would help. but not having access to bootloader or recovery just makes it nearlly imposible do anything.
now there are people who have the knowhow and equipment to jtag the vision, and they probably charge in the $50 range. this *may* get you access to your bootloader and then of course a full stock rom/radio/spl/etc would be forced to you phone but again without knowing what caused the brick it is hard to say
Sent from my HTC Vision using xda premium
Thanks.
May i ask dumb question? bootloader is stay in emmc? or another storage?
For example, desire s with died emmc setup to boot from microSD and it works!
I see no problem with replacement emmc but boot from sd is easier if bootloader alive, of course
And jtag-board with soft is so high price..
yeah the bootloader partition is in the emmc, if that is just borked (not a fried emmc) jtag will fix it. you can't boot from sd because you have nothing working, cathedral (I think that's who it was) discovered how to boot off sd in these situations, and yes that works with the g2/dz as well, but even then you need a somewhat working recovery
jtag is probably about the same as a new logic board, maybe a little cheaper. but if you can't find someone to do it for like 20~30 bucks then buy a new motherboard for like 60~80. or learn how to do jtag yourself, the equipment is rather cheap (sometimes can make your own cable) and the software I believe is free. someday I plan to learn myself (got a couple dead g1s lying around) but for now I'm no help in that regard
Sent from my HTC Vision using xda premium
if bootloader hold in emmc.. so i really want to know what is written in cpu-memory)
I believe all partitions are held in the emmc, the cpu is just like the command center and decides what to do and when to do it.
Sent from my HTC Vision using xda premium
above CPU exists another flash-drive but i dont know anything about data located in this storage.
sorry I couldn't tell you, haven't looked it to this much but to my understanding is that all partitions are held in the emmc. I guess its possible that the larger system parition is located in a seperate nand but I don't think so. I'm sure a little googling will turn up a breakdown of all compenents on the logic board if your interested and where memory is alocated
Sent from my HTC Vision using xda premium
Replacing emmc solved problem
Hey glad to hear! Did you replace the whole board or just the chip?
Sent from my SGH-T839 using Tapatalk 2
Juct a chip оfcourse)

[Q][Urgent] Wildfire Died?

Well I rooted my htc wildfire and overclocked it.
Everything seemed to work fine for a few months
and then...
I got a text message, and I responded to it, but I did also see that my battery was almost empty, then after responding, I putted my phone in my pocket, Then like 15 minutes later, I looked at my phone and it didn't do anything anymore, so I thought, my battery ran out, nothing to worry about then I got home, plugged in my phone... led didn't turn on... phone didn't charge. I was like damn, maybe my battery died? So I went outside to someone who also has a Wildfire and asked if I could try his battery, We switched batteries and my phone still didn't work
Does anyone know how i can fix this? my phone doesn't respond to ANYTHING I've tried
These symptoms are a bad omen.
Does it pick anything up plugging it into a computer?
Sent from my HTC Wildfire using xda premium
Scratch0805 said:
Does it pick anything up plugging it into a computer?
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
nope, nothing at all :s
Remove battery and plug mobile to ur laptop or desktop and press power plus volume down button together....u see hboot?
First remove ur battery and then try to get hboot screen after u plugged ur phone to ur laptop or desktop via usb...
Sent from my HTC Wildfire using XDA App
Ankurcul said:
Remove battery and plug mobile to ur laptop or desktop and press power plus volume down button together....u see hboot?
First remove ur battery and then try to get hboot screen after u plugged ur phone to ur laptop or desktop via usb...
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
No response from the device at all :s
Bro ur phone is bricked....
Sent from my HTC Wildfire using XDA App
Ankurcul said:
Bro ur phone is bricked....
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Than that would be the first wildfire thats been bricked AFAIK
Maybe it's a hardware issue, something as motherboard or CPU or maybe the connector for the lcd screen has become loose
EDIT: Did your phoneshowany sign of intability before you put it in your pocket; was it hot?
Ankurcul said:
Bro ur phone is bricked....
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
lol, how can it be bricked if I used the root for a few months and didn't change anything to it for a while?
also @lcd poster
if it was my lcd, my led should still turn on when inserting the phone to a power connection
also I do also think it is something with my mainboard/cpu, i've read on the internet that i'm not the only one with a phone that just doesn't respond to anything anymore (wildfire) even others who hadn't rooted their phone got this issue, although they have garrantuee :s
sorry for my bad english
Anyhow its great u r not bricked bt if u have damaged CPU so do u have warranty/guarantee?
Sent from my HTC Wildfire using XDA App
Ankurcul said:
Anyhow its great u r not bricked bt if u have damaged CPU so do u have warranty/guarantee?
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Rooted and overclocked, I don't think my warranty is still valid?
Yes your warranty is void. But, if you were on a Stock / Sense based ROM, you *may* be lucky and the service guys may not notice.
3xeno said:
Yes your warranty is void. But, if you were on a Stock / Sense based ROM, you *may* be lucky and the service guys may not notice.
Click to expand...
Click to collapse
But maybe they won't start repairing it and give me just a new one, (since it's more expensive to repair the phone then to give me a new one i guess) and then they'll won't notice either?
also, if I do bring back my phone and they find out about it, will they charge me for the repairing costs? even if I don't want it to be repaired if it will cost me? (I already bought an iphone now, but sometimes i just want to experiment back with my android xd)
I really can't answer that mate. Policies vary widely across stores and nations. But, don't hold your breath for a new one, I think that case is extremely unlikely. I guess your best bet is to give them the phone, and have them contact yo regarding it's situation, repairs, and costs (if any) after their preliminary inspection / assessment. Only after their assessment, you give the go ahead to repair / replace (If free ).
3xeno said:
I really can't answer that mate. Policies vary widely across stores and nations. But, don't hold your breath for a new one, I think that case is extremely unlikely. I guess your best bet is to give them the phone, and have them contact yo regarding it's situation, repairs, and costs (if any) after their preliminary inspection / assessment. Only after their assessment, you give the go ahead to repair / replace (If free ).
Click to expand...
Click to collapse
thanks, i'll probably go to the store tommorow, but my bro got a new ipod nana (6g) because his lock button was stuck
ex4life6pro said:
thanks, i'll probably go to the store tommorow, but my bro got a new ipod nana (6g) because his lock button was stuck
Click to expand...
Click to collapse
HTC and Apple don't roll the same way.
Apple's products aren't even worth repairing, thus they don't bother doing that.
it might be an lcd problem this thing also happened to me...
I know quite a few friends of mine who had similar issues with other HTC devices and they just went to the shop and they were given new ones in a short time. usually guys at the customer service are ignorant and don't check for anything, even if in your situation it should be impossbile to know which rom you're mounting.
my advice is go there and have a brand new wildfire, nobody will discover it's without warranty
Mabye its static?
Once my brothers netbook had a static build up causing a problem i dunno if the same rules apply but try: take out battery -> hold power on for around 30secs, If that didnt work try getting into bootloader holding vol down and power on when your phones off
Hope my ideas worked and that your wildfires better
I have same problems
When i trying root my HTC device ... there are something wrong... so it can't boot after rooting.
I think that it was bricked.
How to unbrick HTC Wildfire? Pls, help me resolv this problem

HTC ONE X Won't turn On, help!

Hi guys,
My HTC One X shut off yesterday mysteriously and won't turn on, there is also no red light when plugged into a charger, the phone just seems to be dead. I have tried to hold the volume down button and the power button for up to two minutes and nothing happens to reset it! Please help if you can, thanks in advance!
try with some other a/c adapter, or just other usb cable.
I tired changing adapters and the cable but no luck.
mxtek5 said:
I tired changing adapters and the cable but no luck.
Click to expand...
Click to collapse
Same query...I got my new HTC one x a day before (from grey mkt). Day 1, it was running smoothly...after installing few apps from play store, next day it went dead....now nothing seems to be happening with this new dead brick. No charging, no display.. nothing.....guys pls help
This seems to be all too common and I wonder why HTC hasn't had some sort of recall issued for this? I must say though that I called htc today and they were very pleasant to deal with, I am shipping the phone off to them tomorrow for repairs and will report back on how it goes.
Did u undervolt or tried any type of modifications to systems
Sent from my HTC One X using xda premium
I have the same problem as member mxtek5! was fine and all the sudden it just shut off and never came back to life... 2 days now! Please, if someone finds an answer, do share with us!!!
Elegori raifing
ashutoshsinghy2k said:
Did u undervolt or tried any type of modifications to systems
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
What is undervolt? Do you mean use a different charger?
No I haven't done any modifications to the system.

How I can brick my galaxy nexus with an EMMC fried?

hi guys, I've probably fried the emmc on my phone...
I've tried everthing from recovery from toolkit and from odin (remains just fastboot I had not time yet) whatever I wipe or I flash on my phone doesn't matter all sticks there when I reboot (and my phone keep gooing in bootloop on cm logo)
So since it's unlocked I'm trying to find a way to brick definitely my phone, so I can take in warranty.
Anybody has suggestions to brick it??
Pull something off the motherboard. This may/may not work to get it replaced but will most definitely brick it.
Sent from my 2013 Kindle Fire HD
@fracama87 Did you try omapflash?
Maybe try messing around with the headphone port
Mineturtle33 said:
Pull something off the motherboard. This may/may not work to get it replaced but will most definitely brick it.
Sent from my 2013 Kindle Fire HD
Click to expand...
Click to collapse
I woldnt advise that at all, on my nexus 7 2012 I was popping the back off and my screwdriver slipped and knocked a resistor off the motherboard (making my GPS not work). I accidentally erased my bootlader a few months later and when I sent it in to warrejty they rejected it due to "customor induced hardware damage".
Sent from my Nexus 4 using Tapatalk
IRX120 said:
I woldnt advise that at all, on my nexus 7 2012 I was popping the back off and my screwdriver slipped and knocked a resistor off the motherboard (making my GPS not work). I accidentally erased my bootlader a few months later and when I sent it in to warrejty they rejected it due to "customor induced hardware damage".
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Ok, don't do what I said. :silly:
maschiosoosai said:
@fracama87 Did you try omapflash?
Maybe try messing around with the headphone port
Click to expand...
Click to collapse
mmm omap i read is useful for restore bootloader or similar... but i've read is dangerous so maybe it could brick it definetely!
why headphone port?
IRX120 said:
I woldnt advise that at all, on my nexus 7 2012 I was popping the back off and my screwdriver slipped and knocked a resistor off the motherboard (making my GPS not work). I accidentally erased my bootlader a few months later and when I sent it in to warrejty they rejected it due to "customor induced hardware damage".
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Mineturtle33 said:
Ok, don't do what I said. :silly:
Click to expand...
Click to collapse
yeah i thought the same... the solution should be find a way to delete/reset emmc...
fracama87 said:
mmm omap i read is useful for restore bootloader or similar... but i've read is dangerous so maybe it could brick it definetely!
why headphone port?
yeah i thought the same... the solution should be find a way to delete/reset emmc...
Click to expand...
Click to collapse
My intention of suggesting omapflash was to unbrick your phone,not to brick it . And as for the headphone port,according to ifixit,the headphone port and speakers are easy to replace(http://www.ifixit.com/Teardown/Samsung+Galaxy+Nexus+Teardown/7182)
fracama87 said:
hi guys, I've probably fried the emmc on my phone...
I've tried everthing from recovery from toolkit and from odin (remains just fastboot I had not time yet) whatever I wipe or I flash on my phone doesn't matter all sticks there when I reboot (and my phone keep gooing in bootloop on cm logo)
So since it's unlocked I'm trying to find a way to brick definitely my phone, so I can take in warranty.
Anybody has suggestions to brick it??
Click to expand...
Click to collapse
I have same problem,cannot flash to stock,how to solve this.Thanks in advance
maschiosoosai said:
My intention of suggesting omapflash was to unbrick your phone,not to brick it . And as for the headphone port,according to ifixit,the headphone port and speakers are easy to replace(http://www.ifixit.com/Teardown/Samsung+Galaxy+Nexus+Teardown/7182)
Click to expand...
Click to collapse
I still don't understand why I should mess the headphone port... Iìll try omapflash in this weekend if I'll have time... in the meantime I got a moto g
brankoni33 said:
I have same problem,cannot flash to stock,how to solve this.Thanks in advance
Click to expand...
Click to collapse
Eh nobody find a solution for the moment
@fracama87 Then instead of the headphone port, try using omapflash. Enjoy your Moto G
Sent from my Galaxy Nexus using Tapatalk

Categories

Resources