:crying: Hi there, yesterday i tried to remove cwm from my galaxy gt-i8150 and i've referred to many solution they mentioned that do it same way as how i flashed cwm...but at last i failed, my SGW do turn up when i press the power button but it stuck at "Warning!! A custom OS can cause......." there have prompt to press volume up or down and a triangle exclamation mark at below (i dont know whether this is download mode or not)
When i pressed volume down button it reboot and then come back to this screen again, i've tried many times pressing volume down button and pull out & place back my battery, it still shown up this screen allover again. I viewed other unbricking solution thread but didn't found any situation same as mine. When i pressed volume up button nothing happen, i can't boot into recovery mode. please help ...:crying::crying::crying:
http://androidforums.com/galaxy-y-a...ne-using-odin-v1-85-also-fixes-bootloops.html
This link will help. But it's for galaxy Y. Download the stock ROM. (Its in the galaxy W forums) Boot into download mode is pressing Power button, Volume down and Menu button. Good luck mate.
patrickdass said:
This link will help. But it's for galaxy Y. Download the stock ROM. (Its in the galaxy W forums) Boot into download mode is pressing Power button, Volume down and Menu button. Good luck mate.
Click to expand...
Click to collapse
thanks for response sir, i already viewed many thread that were talking about this method, but the problem is when i press the power button to switch on my phone, it straight away goes to download mode after samsung logo shown up, i dont even have to use combo press to boot into download mode.
And nothing happen when i press volume up button that stated "continue" but volume down button do restart my phone and boot into download screen again. When i plugged in USB, pc couldn't detect my phone.. any solution..?
will_wl said:
thanks for response sir, i already viewed many thread that were talking about this method, but the problem is when i press the power button to switch on my phone, it straight away goes to download mode after samsung logo shown up, i dont even have to use combo press to boot into download mode.
And nothing happen when i press volume up button that stated "continue" but volume down button do restart my phone and boot into download screen again. When i plugged in USB, pc couldn't detect my phone.. any solution..?
Click to expand...
Click to collapse
try to install CWM again on your mob by using odin .. your mob should be detected when you press continue if you install Samsung drive on your pc
Ahmed.ragab said:
try to install CWM again on your mob by using odin .. your mob should be detected when you press continue if you install Samsung drive on your pc
Click to expand...
Click to collapse
yeap i do installed samsung driver on my pc from kies, but when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
will_wl said:
yeap i do installed samsung driver on my pc from kies, but when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
Click to expand...
Click to collapse
did you pressed continue while you are in download mode ?
Ahmed.ragab said:
did you pressed continue while you are in download mode ?
Click to expand...
Click to collapse
Yes i did
boot into download mode, then connect usb, windows show unknow device, odin not detected
will_wl said:
Yes i did
boot into download mode, then connect usb, windows show unknow device, odin not detected
Click to expand...
Click to collapse
I will upload Samsung drive for you to try
Ahmed.ragab said:
I will upload Samsung drive for you to try
Click to expand...
Click to collapse
Thankyou dude. Appreciate your reply
will_wl said:
Thankyou dude. Appreciate your reply
Click to expand...
Click to collapse
welcome Bro
here it is
http://www.mediafire.com/download/dg0s1jff9lmmgii/Samsung_Galaxy_W_Drivers.exe
Ahmed.ragab said:
welcome Bro
here it is
http://www.mediafire.com/download/dg0s1jff9lmmgii/Samsung_Galaxy_W_Drivers.exe
Click to expand...
Click to collapse
Too bad it still not working Thanks anyway.
Currently using windows 8, i think this is windows vista package? Should use driver for windows 8?
i seek into device manager and found Samsung Mobile Composite Device with exclamation mark on it, it say 'Device Cannot Start (Code 10)'
i spent my whole day on this problem already yet still haven't found a method to solve it :crying::crying:
will_wl said:
i seek into device manager and found Samsung Mobile Composite Device with exclamation mark on it, it say 'Device Cannot Start (Code 10)'
i spent my whole day on this problem already yet still haven't found a method to solve it :crying::crying:
Click to expand...
Click to collapse
I think as it is able to go in download mode there is a hope .. don't worry will be fixed
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1467128
And download the firmware for your country from sammobile
Try to install adb driver (but first remove samsung usb driver if are installed)follow this guide:http://technologyandroid.com/2013/0...river-adb-di-qualsiasi-dispositivo-android-2/(it's in italian language)
then install samsung usb driver and check if odin recognize the device.
I have tried this guide yesterday for galaxy s2 and it works.
If after that don't works try to change the usb port , open odin by run as administrator and don't reboot odin.
Redwraith96 said:
Try to install adb driver (but first remove samsung usb driver if are installed)follow this guide:http://technologyandroid.com/2013/0...river-adb-di-qualsiasi-dispositivo-android-2/(it's in italian language)
then install samsung usb driver and check if odin recognize the device.
I have tried this guide yesterday for galaxy s2 and it works.
If after that don't works try to change the usb port , open odin by run as administrator and don't reboot odin.
Click to expand...
Click to collapse
when i click on the download link ads window pop-out and download does not go on, any idea?
miki2o said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1467128
And download the firmware for your country from sammobile
Click to expand...
Click to collapse
Thankyou for trying to help
but seems like u don't get what is my problem now, when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
will_wl said:
when i click on the download link ads window pop-out and download does not go on, any idea?
Click to expand...
Click to collapse
install the latest USB drivers from here:http://uploaded.net/file/xdloq4jw (after installing the adb driver!!)
Windows 8 has major problems with compatibility with Odin ......that is probably the issue here.......
Try a PC with an older OS (preferably XP but vista or 7 should work)
If you're using vista or 7, run Odin as administrator.
If XP, run normally.
Then......
Make sure....
1) kies is NOT running (kill in task manager)
2) any installed firewalls/anti virus are disabled
3) have a selection of USB cables on hand to try if one doesn't work.
4) the USB port you are using needs to be a primary port (connected directly to the PC motherboard)......but try them all anyway....
Good luck....
Sent from my GT-I9100 using xda app-developers app
Related
Hi everyone
Just 2 days ago i got my Galaxy W. Yesterday i decided to install COW rom.
So i followed the instructions. I rooted the phone which and after that i had to flash ClockworkMod v5.5.0.4. However i didn't follow the instructions as i should and i didn't extract the file from the zip archive. So i put this recovery-clockwork-5.5.0.4-ancora.zip file in the internal storage of the phone. After that i performed recovery-clockwork-5.5.0.4-ancora.zip manual flash with adb shell for the zip file. After restarting my phone the samsung logo showed up and after that i was in the download mode. I can't get into the recovery mode. Now i can only get into the download mode or ramdump mode.
When i connect the phone to my pc it is marked as unspecific device which means that i can't do anything with it. I tried connecting it to mac, ubuntu, win 7 but i got the same result. I tried using One Click UnBrick program but that didn't help. The odin doesn't recognize my phone as well. I have also reinstaled drivers, kies but with no results.
So far i haven't found anyone with a similar problem.
Is there any chance to unbrick my phone? Or should i just take it to samsung service?
Uninstall drivers. After install them again. Use another USB Port, for best result one of the backsided ones. Put your phone into download mode, start odin, connect phone to PC, flash stock rom.
worked for me and for my friends SGS II also. I'm hoping for that it works!
Sent from my GT-I8150 using XDA App
Forgot to mention, restart after uninstalling drivers und again do a restart after installing drivers and uninstall kies, sometimes it disturbs odin
Sent from my GT-I8150 using XDA App
Followed your instructions but the odin said that i don't have a phone connected
Any other suggestions?
getsumhax said:
Followed your instructions but the odin said that i don't have a phone connected
Any other suggestions?
Click to expand...
Click to collapse
have u try to go to download mode? (turn off device, press volume down + home + power)
I never had a problem for that, just get in to download mode, connect it, then Odin will read it automatically
Similiar with my problem before, but in my case when i turn on device, mine showing false download mode. I can't go to download, but only showing menu...
Have you go to download mode with voldown+power+menu key? Or just use 'false' download mode?
Sent from my GT-I8150 using XDA App
I get into the download mode by pressing power+vol down + home and after that a menu shows up and i press vol up. Then it says:
ODIN MODE
PRODUCT NAME: GT-I8150
CUSTOM BINARY DOWNLOAD: NO
CURRENT KERNEL: UNKNOWN !!
Downloading...
Do not turn off target!!
Just tried connecting to Odin again without success. Any other ideas?
omg im so happy.
Odin somehow detected my phone and i reinstalled it.
Thanks everyone
OK guys so this is the issue, I'm trying to reset my buddies Samsung Galaxy S 2 on T-Mobile. He forgot his password and he asked me to help since I'm handy with cell phones. So I tried the easiest thing and tried to do a hard reset. Now I press and hold Volume Up and Down and Press and hold the Power button until I feel it vibrate and let go of the Power button while still holding Volume Up and Down and it will take me to where it says "# Manual Mode #" but when I scroll down and try to select "Wipe Data/Factory Reset" I can't select it. I tried pressing the Home button and the Power button to select it and nothing. I tried all the buttons and nothing. I also tried putting in Download Mode to try to reflash the firmware but when I connect it to the computer I don't here it connect and Odin doesn't recognize it not even in the Device Manager. I tried doing the same on my Samsung Galaxy Tab 2 7.0 and the computer and Odin recognize it just fine. So i'm stumped and need you guys help! Thanks in Advance....
Have you installed the proper USB driver and Kies for the phone on your computer? Make sure you are using the latest Odin.
Also, try flashing a different recovery system such as TWRP once you're able to get Odin working.
As long as you are able to get your phone to connect to Odin, you should be fine. You can even flash a stock ROM through Odin if all else fails.
Good luck!
asj2583 said:
OK guys so this is the issue, I'm trying to reset my buddies Samsung Galaxy S 2 on T-Mobile. He forgot his password and he asked me to help since I'm handy with cell phones. So I tried the easiest thing and tried to do a hard reset. Now I press and hold Volume Up and Down and Press and hold the Power button until I feel it vibrate and let go of the Power button while still holding Volume Up and Down and it will take me to where it says "# Manual Mode #" but when I scroll down and try to select "Wipe Data/Factory Reset" I can't select it. I tried pressing the Home button and the Power button to select it and nothing. I tried all the buttons and nothing. I also tried putting in Download Mode to try to reflash the firmware but when I connect it to the computer I don't here it connect and Odin doesn't recognize it not even in the Device Manager. I tried doing the same on my Samsung Galaxy Tab 2 7.0 and the computer and Odin recognize it just fine. So i'm stumped and need you guys help! Thanks in Advance....
Click to expand...
Click to collapse
If you can't get Odin to work, test it on another Galaxy S2 to see if the problem is with the computer. Just a tip.
I have been having the same problem. this t989 i have been working with does not show up on any laptop in the house, and they all have the kies drivers installed. it is "usb device not found." i have been considering wiping the usb storage and sending it straight back to factory settings. but without odin i am going to have to manually flash recovery and all that.. any ideas?? I hooked my phone up to both laptops in the house and it shows up instantly. i am definitely confused. and the worst of it, is ubuntu didnt even recognize the phone.
Do yo have any belkin router software install on your computer. If you have, uninstall it and try.
Sent from my SAMSUNG-SGH-T989 using xda premium
FineTalent said:
Have you installed the proper USB driver and Kies for the phone on your computer? Make sure you are using the latest Odin.
Also, try flashing a different recovery system such as TWRP once you're able to get Odin working.
As long as you are able to get your phone to connect to Odin, you should be fine. You can even flash a stock ROM through Odin if all else fails.
Good luck!
Click to expand...
Click to collapse
No luck, installed Kies and didn't recognize phone in Odin. What's weird is that it will not let me factory reset thru the 3 button combo in # manual mode #! I would try a different pc but don't have one atm.
i think i am going to try pointing the phone to googles oem driver
Windows 7
To install the Android USB driver on Windows 7 for the first time:
Connect your Android-powered device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and select Manage.
Select Devices in the left pane.
Locate and expand Other device in the right pane.
Right-click the device name (such as Nexus S) and select Update Driver Software. This will launch the Hardware Update Wizard.
Select Browse my computer for driver software and click Next.
Click Browse and locate the USB driver folder. (The Google USB Driver is located in <sdk>\extras\google\usb_driver\.)
here is something interesting the phone i am working on the usb storage is not mounted on the phone. has anyone seen anything like this before?
My PC doesn't even recognize the phone while its in odin mode??? It's like it's not even connected!!!
asj2583 said:
My PC doesn't even recognize the phone while its in odin mode??? It's like it's not even connected!!!
Click to expand...
Click to collapse
Well I tried everything and seems my buddy is not picking up the phone so I have useless phone on my hands. Does nobody know why it wont let me select factory reset in the stock recovery or why my computer doesnt reconize the phone in download mode? Someone please help me!
asj2583 said:
Well I tried everything and seems my buddy is not picking up the phone so I have useless phone on my hands. Does nobody know why it wont let me select factory reset in the stock recovery or why my computer doesnt reconize the phone in download mode? Someone please help me!
Click to expand...
Click to collapse
the phone could be borked. one that i hve been working on is the same way. i got ahold of samsung and they told me to send it in for repair.
hi. I encountered a problem on my phone that doesn't boot properly.
When i tried to switch on my phone it showed at first the welcome msg "Samsung S4 mini gt-i9192" then after that, a pitch black screen, could not properly boot. But i learn that it does not turns off after the screen turns all black, i have to press the power button first to turn off the phone.
This problem started when i installed an app with some compatibility problems.
I wanted to root my phone hoping that can solve the problem, but then again a problem occurred when i tried to connect my phone to my laptop. It fails to install MTP usb device to my computer. I tried connecting it again provided that samsung kies was installed but again failed to connect my phone. Therefore i cant root my phone because i cant copy the files needed to root to my phone sd card.
I tried reinstalling kies, installing mtp drivers but nothing happened. I tried also restoring the previous boot image, restoring factory settings using recovery mode. But then problem still exist.
And fyi my phone can't mount any external sd card using recovery mode. And i think it was not in a debugging mode.
Phone: samsung s4 mini gt-i9192
firmware: i dont know
So basically, the problem is:
my phone wont boot,
i cant connect it to my pc
and i cant root it.
How should i root or even flash my phone when i cant connect to my computer? Do you have any idea on how to solve this problem? Any solutions or suggestions would be much appreciated. tnx.
champagneerantja
emzgames said:
snipped.
Click to expand...
Click to collapse
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
dovakinn said:
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
Click to expand...
Click to collapse
tried both yet still unable to connect.
emzgames said:
tried both yet still unable to connect.
Click to expand...
Click to collapse
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
dovakinn said:
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
Click to expand...
Click to collapse
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
emzgames said:
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
Click to expand...
Click to collapse
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
dovakinn said:
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
Click to expand...
Click to collapse
yah, thats what im thinking. i just brought this here hoping to solve this problem without going to a shop. thanks anyway.
aac. To me put your phone in download mode then use moborobo(a windows software) . Just open it and it will install the driver. If it dies not work then use adb installer . Remember you should have only any one of the software at one tim means either moborobo or kies or adb installer
Sent from my GT-I9001 using xda app-developers app
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
dovakinn said:
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
Click to expand...
Click to collapse
tnx man, but no luck..
Tried flashing a custom rom?
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically."
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
leok810i said:
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically."
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
Click to expand...
Click to collapse
your phone brick?
flash your stock firmware first the try it again.
leok810i said:
the most popular way on net to root note3 neo is
"Download and extract Odin to any folder on desktop or anywhere.
Now extract CF-Auto-Root-hl3g-hl3gub-smn750.zip file and you will get a CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Run Odin3 v3.09.exe as Administrator. Just right click on the file and select Run as administrator.
urn off your Samsung Galaxy Note 3 and wait for few seconds to turn it on.
Press and hold Volume down and home buttons for sometime. After 2 seconds press and hold power button too. You will see a warning message. Press Volume UP button to boot in Download mode from where we will flash CF-Auto-Root tool.
Connect your device with USB and wait for a few seconds. In the message box which is in the bottom left, you will see a message Added!! If you didn't get the message, then please install USB Drivers from here.
In the section of AP, just select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Make sure that Auto Reboot and F. Reset Time are the only boxes which are selected. If any other box is selected, please un-select it.
Hit the Start button to root your device and flash it.
You will see a PASS message in the message box and your device will be rebooted automatically."
n it doesnt work
rather it just stop at 30 percent & brick it
please give a actual root procedure that work for indian note 3 neo
ill b really thankful
i live in india n build no. is N750XXUANB3
please help
Click to expand...
Click to collapse
ikw d fix 4 it... do 1 thing remove ur battery... go to download mode 1st without connecting usb cable... when it will say press vol up to cont b4 press vol up insert the usb cable tn press vol up u will c that the com port will come without fail and if it still.fails tn fry check out ur driver pack or try flash it using linux OS like ubntu try it
Sent from my SM-N750 using XDA Premium 4 mobile app
klaud004 said:
your phone brick?
flash your stock firmware first the try it again.
Click to expand...
Click to collapse
yes i brick my phone
but got it fixed by company
but need A root procedure that work
sgatechwork said:
ikw d fix 4 it... do 1 thing remove ur battery... go to download mode 1st without connecting usb cable... when it will say press vol up to cont b4 press vol up insert the usb cable tn press vol up u will c that the com port will come without fail and if it still.fails tn fry check out ur driver pack or try flash it using linux OS like ubntu try it
Sent from my SM-N750 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
leok810i said:
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
Click to expand...
Click to collapse
give me the variant of ur note 3 neo first.
leok810i said:
hi,
company fixed y mobile but go kexc counter to 1 so i dont think so they'll do t next time
i only have window 7 os
i think i have driver issue
so if u can please upload the driver & odin u used to root ur note3 neo, it'll be of great help
n please give the step by step procedure to root
i m a total noob for samsung device
Click to expand...
Click to collapse
ya i will PM u
Sent from my SM-N750 using XDA Premium 4 mobile app
klaud004 said:
give me the variant of ur note 3 neo first.
Click to expand...
Click to collapse
build no. is N750XXUANB3
baseband version N750DDUANA5
android version 4.3
i have attached an screenshot of info
leok810i said:
build no. is N750XXUANB3
baseband version N750DDUANA5
android version 4.3
i have attached an screenshot of info
Click to expand...
Click to collapse
can u download a cpu z then take a screenshot.so we know wich chipset u have.
klaud004 said:
can u download a cpu z then take a screenshot.so we know wich chipset u have.
Click to expand...
Click to collapse
hi
i have attached the snapshots
leok810i said:
hi
i have attached the snapshots
Click to expand...
Click to collapse
ok you have the hexacore.
first you install the driver in your pc
then run odin as administrator.click pda.then choose sm-n750 tar file in your pc.
turn on usb debugging in you note3 neo.then powerdown your phone.now boot youre phone in download mode.
by pressing volune down.home button and power.
now conect youre phone into pc then wait till a blue color appear in the small box in the upper left of odin saying id: com(dont know if i remember that corectly)if not.try another usb port.
if its blue then click start.utill you see succes.
download http://goo.gl/zEeQcr
I have SM-N750 with the same SOC and spec with your phone. It is using in Vietnam and rooted by the file: https://mega.co.nz/#!KccSnQwZ!C_kb6flVTrO5s0EyLNO_1Dx8m9XO-9_B3X_8-lMvVvs
It was rooted ok (use ODIN 3.0.7 or 3.0.9 and PDA button to choose the file). Unfortunatelly it has not any stable recovery up to now.
Note: If you connect to the laptop or PC first then start ODIN, ODIN must show the "added!" message. If not, trying to install Samsung mobile driver or/and Kies 2. Besides, download mode may be turn off and turn on again.
I recently tried to flash a .kdz file on my g pro (e988) ,accidentally i removed my phone from pc while it was in download mode then removed battery also,so after that i reconnected to pc but no download mode no recovery mode,no fastboot no adb,no LG logo atleast,soft buttons led lights for 2-3 seconds and off.
https://www.youtube.com/watch?v=Np9LRCN2Hrg
Download mode press volume up+down together than plug usb. Use CSE flash on LG Flash Tool.
wesly.btm said:
Download mode press volume up+down together than plug usb. Use CSE flash on LG Flash Tool.
Click to expand...
Click to collapse
i do it but i have nothing and when i connect my phone to pc my device manger show my phone qhsusb_dload
Have you installed all driver?
wesly.btm said:
Have you installed all driver?
Click to expand...
Click to collapse
yes i did bro
try this link it may works. http://tech2mech.com/how-to-flash-kdz-lg-f240-f180-f160-lg-g-pro/
i try this method my problems Fix.
wesly.btm said:
try this link it may works. http://tech2mech.com/how-to-flash-kdz-lg-f240-f180-f160-lg-g-pro/
i try this method my problems Fix.
Click to expand...
Click to collapse
thanks bro 4 ur help but i true it but it stop in %4 and get error
qhsusb_dload means you´re in qualcomm mode, and also means that you´ve killed phone boot. from what I know, only medusa and riff boxes can fix it.