I got both of them, haven't seen anyone else do a comparison video, so here's the link:
http://www.youtube.com/watch?v=U0I_-HTjxQ0
I apologize ahead of time for the um's...public speaking isn't my thing.
Here is an album of the Spigen Ultra Hybrid case: http://imgur.com/a/CM5zW
Here is an album of the Rearth Ringke Fusion case: http://imgur.com/a/AR8vh
Feel free to ask any questions, I'll be happy to answer them.
tmhiott said:
I got both of them, haven't seen anyone else do a comparison video, so here's the link:
http://www.youtube.com/watch?v=U0I_-HTjxQ0
I apologize ahead of time for the um's...public speaking isn't my thing.
Here is an album of the Spigen Ultra Hybrid case: http://imgur.com/a/CM5zW
Here is an album of the Rearth Ringke Fusion case: http://imgur.com/a/AR8vh
Feel free to ask any questions, I'll be happy to answer them.
Click to expand...
Click to collapse
I was watching this earlier when I did a YouTube search. When I saw the design for the Fusion and Ultra Hybrid, I was immediately attracted to the Ultra Hybrid. The Fusion looks a bit too round for me, which is a shame since I loved the Fusion case for the Nexus 4.
great review, thanks
edit: i think your spigen case might be ok, you might just have to peel off the plastic in the front and back just like the ringke.
Good review
Sent from my Nexus 5 using xda app-developers app
Thanks for the review seems like Spigen was the right choice.
waxlabo said:
great review, thanks
edit: i think your spigen case might be ok, you might just have to peel off the plastic in the front and back just like the ringke.
Click to expand...
Click to collapse
I was also going to ask this, did you actually remove the plastic films on the Spigen one? because it doesn't have a message like the Ringke to remove it but they're there and I'm almost certain you didn't remove them because when you were comparing them it looked hazy.
Does the Ringke come with an option for a solid black back instead of clear?
bmstrong said:
Does the Ringke come with an option for a solid black back instead of clear?
Click to expand...
Click to collapse
Nope. That would be the Slim series but thats another case.
Damn I thought the Ultra hybrid would be about the same size as the Fusion... I like smaller cause my hands are not large. Unfortunately I order an ultra hybrid if I would have seen this before that I would have bought the Fusion! Anyone want to buy my Ultra hybrid?? lol it hasnt come in yet but idk I may need to sell it and buy the fusion instead..lol
daLareid said:
Thanks for the review seems like Spigen was the right choice.
I was also going to ask this, did you actually remove the plastic films on the Spigen one? because it doesn't have a message like the Ringke to remove it but they're there and I'm almost certain you didn't remove them because when you were comparing them it looked hazy.
Click to expand...
Click to collapse
He posted on the Reddit thread that he did in fact forget to peel off the front screen protector on the case. Afterwards, the scratches were gone.
Xodus22 said:
He posted on the Reddit thread that he did in fact forget to peel off the front screen protector on the case. Afterwards, the scratches were gone.
Click to expand...
Click to collapse
That's what I thought, thanks for the update.
I thought mine was scratched too, but you need to peal both the front and back protectors off.
I have both as well. The Spigen is higher quality, but the Rearth is slightly smaller and much more comfortable to hold due to the rounded edges. Also the buttons are easier to press on the Rearth.
So far I have all the Spigen cases and the Rearth and I really don't like any of them. I have a Supcase and a Diztronic on their way. Having a PITA time finding a decent case for this thing. I know I'll like the Diztronic, but I am really, really hoping UAG comes out with a case for us (they likely won't).
_MetalHead_ said:
I have both as well. The Spigen is higher quality, but the Rearth is slightly smaller and much more comfortable to hold due to the rounded edges. Also the buttons are easier to press on the Rearth.
So far I have all the Spigen cases and the Rearth and I really don't like any of them. I have a Supcase and a Diztronic on their way. Having a PITA time finding a decent case for this thing. I know I'll like the Diztronic, but I am really, really hoping UAG comes out with a case for us (they likely won't).
Click to expand...
Click to collapse
I'm with you. So far I tried the neo hybrid and the ultra thin, and they are not floating my boat. I also have the supcase and diztronic coming(diztronic arriving today), and will report back once I get the two and compare them.
Sent from my Nexus 5 using xda app-developers app
ethantarheels123 said:
I'm with you. So far I tried the neo hybrid and the ultra thin, and they are not floating my boat. I also have the supcase and diztronic coming(diztronic arriving today), and will report back once I get the two and compare them.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yeah my Diztronic is being delivered today too. The Diztronic is pretty much a sure bet but it's TPU, so it is what it is. It'll do until I find a better case.
It's like you went back to 1985 and flimed that video. Thanks for the video, very informative!
ethantarheels123 said:
I'm with you. So far I tried the neo hybrid and the ultra thin, and they are not floating my boat. I also have the supcase and diztronic coming(diztronic arriving today), and will report back once I get the two and compare them.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
THANK YOU I am waiting for what you say because I too dont like the ULTRA
_MetalHead_ said:
Yeah my Diztronic is being delivered today too. The Diztronic is pretty much a sure bet but it's TPU, so it is what it is. It'll do until I find a better case.
Click to expand...
Click to collapse
Diztronic is one of those tried and true cases. If only they made a version where the front lip isn't glossy
Sent from my Nexus 5 using xda app-developers app
ethantarheels123 said:
Diztronic is one of those tried and true cases. If only they made a version where the front lip isn't glossy
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yep, agreed completely.
Sent from my Nexus 5 using XDA Premium 4 mobile app
just got my diztronic. give me a few minutes to gather some thoughts about it.
Edit: Alright. First off, it looks very nice and sleek, and it definitely does not add as much size as the neo hybrid did (that thing literally gave the N5 the height and width of a Note 3). Fit and finish is OK, not quite as good as sgp or even the older Diztronic cases I remember having on my ATT One X. There is a little bit of flash at the bottom edge under the charging port, so if you usually rest your pinky near the charging port, you will feel a little bit of sharpness. Other than that, the case is pretty formfitting. The buttons actually have a nice click feedback, and it doesn't feel like the case is constantly putting pressure on the buttons when they are not pressed, which is VERY good thing and something I cannot say for most cases. Overall, a solid case, and definitely knocked the neo hybrid away. Waiting for the Supcase for further comparison and judgement.
so it seems that the diztronic wins over spigen and spigen wins over ringke fusion....hmm..
i wonder why no one here mentioned the slim armor from spigen...with all the differences of opinion and no seemingly "excellent" case out there (and with slim armor my preferred one ahving button problems) i dont know what to do ! please do post your reviews people specially if you have multiple cases and which one you like best
Related
I got the i-Blason over the weekend and when I came into the office, I had a package waiting for me. It was the case that is kinda confusing to clarify because it's mixed in with other cases on Amazon. To clarify what I wanted, I went straight to the horses mouth and ordered it directly from i-Blason for $7.99USD+shipping.
http://www.i-blason.com/candygel-hybrid-tpu-hard-clear-case-for-google-nexus-5.html
The case, which is tpu is much more malleable/softer than the Spigen Ultra Hybrid. Also the i-Blason is very tpu-ish on it's lip unlike the Spigen UH, where the Spigen is ultra stiff.
When unpackaging the Candygel tpu, I also noticed that the case "looked" smaller than the Spigen UH. And when I was about to put it on, I said to myself, this doesn't look like it's going to fit! LOL. Glad I was wrong.
The case fit like a bodyglove. LOL I mean the case lip is very flexible and forgiving. And keep in mind I have a Spigen screen protector as well so I had to make sure that didn't come up. And thankfully, it did not. :good:
I have been using it and playing with it for a while and I have to say it's a pretty good case! The buttons are there, allbeit, covered, but the buttons now have feedback, compared to the Spigen UH. The volume buttons are also fine as well.
The ONLY fault I can find thus far is that on the bottom of the case has a scuff mark that was most likely done from the molding process, which I can forgive. It doesn't hinder the use of the case, it isn't sharp or uncomfortable because of it. I can even see it, but I know it's there. And I know I'll forget about it on day to day usage. The cut outs on the speaker aren't the best, but it's tpu and again, it isn't horrible, but I can notice it lol. The mic holes are perfectly exposed and just to note, the micro sim tray are covered. The clear back is why I got it. I can sport my dbrand white CF as well, where the other options before were the Spigen UH and Ringke fusion.
For the price, I can recommend this. and plays well with the Spigen screen protector thus far. The TPU makes the phone more form fitting and seems a tad smaller in holding it in my hands.
Anyways, here are some pics...enjoy! Oh and feel free to ask any questions or if you want pics at different angle and stuff like that.
How much bulk does this case add, in terms of height and width and also the thickness of the phone? I've been looking for a slim case to use with my dbrand skin as well, and I've been eyeing this one up.
Sent from my Nexus 5 using XDA Premium 4 mobile app
It's thinner compared to the spigen ultra hybrid if that helps. It's like a tpu case thickness. Meaning not very thick.
Sent from my Nexus 7 using XDA Premium 4 mobile app
its really looking much better than the spigen ultra hybrid....quite impressive one with the look wise....I would say that would be going to be a nice choice to go for.....
Does the clear back attracts fingers smudges and oil? I have a crystal Spigen ultra fit and I hate that about it.
Sent from my Nexus 5 using xda app-developers app
Theberge43 said:
Does the clear back attracts fingers smudges and oil? I have a crystal Spigen ultra fit and I hate that about it.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I want to say it's actually a bit better than the Spigen UH when it comes to the fingerprint magnet. But saying that, you have to take into account that I have a WHITE cf. That makes the fingerprints invisible and barely visible. But if you hold it at an angle, I can see some, but not as bad as the Spigen UH.
I just ordered a clone on ebay that looks to be exactly the same for $6 shipped from china. I went with ebay one cause there's no branding on it!!
aznchillin said:
I just ordered a clone on ebay that looks to be exactly the same for $6 shipped from china. I went with ebay one cause there's no branding on it!!
Click to expand...
Click to collapse
LOL I don't mind the branding. If it bugged me, I can use goo gone or fingernail polish remover to remove it. But please let us know how that one fares. It should be similar, they all are lol.
aznchillin said:
I just ordered a clone on ebay that looks to be exactly the same for $6 shipped from china. I went with ebay one cause there's no branding on it!!
Click to expand...
Click to collapse
Can you provide a link, shipping to Canada from I Blason is 15 $, which is ludacris.
Theberge43 said:
Can you provide a link, shipping to Canada from I Blason is 15 $, which is ludacris.
Click to expand...
Click to collapse
Comes in clear, white, or black
http://www.ebay.com/itm/Hybri-Flex-.../171175783257?ssPageName=ADME:L:eek:C:US:3160
aznchillin said:
Comes in clear, white, or black
http://www.ebay.com/itm/Hybri-Flex-.../171175783257?ssPageName=ADME:L:eek:C:US:3160
Click to expand...
Click to collapse
Thanks, ordered a white one.
Found another cheap one as well:
eBay item number:171177115078
mmedei9 said:
Found another cheap one as well:
eBay item number:171177115078
Click to expand...
Click to collapse
Only in black and mediocre feedback for a power seller in my opinion (98.8%), but it's cheaper if you're in need for the black!
aznchillin said:
Comes in clear, white, or black
http://www.ebay.com/itm/Hybri-Flex-.../171175783257?ssPageName=ADME:L:eek:C:US:3160
Click to expand...
Click to collapse
Tell me how it goes P:
Sent from my Nexus 5 using xda app-developers app
Great review,
That clear back with the white carbon fiber skin under looks very nice!!
Sent from my Nexus 5 using Tapatalk
Theberge43 said:
Does the clear back attracts fingers smudges and oil? I have a crystal Spigen ultra fit and I hate that about it.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
What about scratches ? I just got a Tech21 case for my Nexus 5 and only had a few days and I can already see scratches building up. I am going to return it tomorrow. It does have a clear back which is what I was looking for. Thanks
DarkAce22 said:
What about scratches ? I just got a Tech21 case for my Nexus 5 and only had a few days and I can already see scratches building up. I am going to return it tomorrow. It does have a clear back which is what I was looking for. Thanks
Click to expand...
Click to collapse
Well you will eventually get scrathes. I have a white backing on my phone so you cannot see them at all. But looking at it without the phone in it, yes you can see scratches.
Hello, i have my Nexus 5 but i have a little question.
In your opinion, what is the best case :
http://www.spigen.com/nexus-5-case-ultra-hybrid.html
or
http://www.rearthusa.com/google-nexus-5-hybrid-fusion-case
I have already looking for these case on forum but i dont find good or bad comment.
What do you think?
Ignoring the 87 other posts regarding these 2 cases. I have the Rearth. It's nice. Doesn't fit perfectly with dbrand skin and xoskin says more good about tolerances than bad.
Sent from my Nexus 5 using xda app-developers app
I have the ringke fusion, its really nice and slim, my phone already felt from hand height and nothing happen and that's what I expect from a case...
Envoyé de mon Nexus 5 en utilisant Tapatalk
I have the Spigen Ultra Hybrid.
I don't like how it makes your phone feel bulky and too big to fit in my pocket. It also weakens the magnetic pull of my InfiniApps Slyde CD Mount due to the clear plastic backing being really thick.
On the plus side, makes it feel like your phone is a tank and can take any drop.
Thanks you
+1 for the Spigen Ultra Hybrid!! Just got it today. Love the feel of it. Love the look of it. Definitely recommend this case. If only I got it a few days ago before I dropped my nexus and cracked my screen...
Sent from my Nexus 5 using Tapatalk
I have the Ultra but am waiting on the Fusion to show up. I really like the Ultra but not a fan of the button feel. It's just....odd.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Jirv311 said:
I have the Ultra but am waiting on the Fusion to show up. I really like the Ultra but not a fan of the button feel. It's just....odd.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You'll like the fusion, then. The button feel is perfect.
Sent from my Nexus 5 using Tapatalk
I was trying to decide between the two as well and ended up with the Fusion because of the button feel and being slightly thinner. I'm pretty happy with it so far, the button feel is the best of any case where there aren't cutouts for the buttons that I've ever used. Only one small complaint is that the edges of the case are kind of sharp but it really isn't bothering me that much.
I have the Ringke Fusion. I had it for my N4 as well which I liked so I figured I'd get the N5 version. Overall a pretty good case, although like cee-ach said the edges of the case are kind of sharp (wasn't like this on the N4). It's a bit annoying for me, mainly because I use LMT launcher, and when I swipe from the right edge of the screen my thumb always makes contact with the edge of the case.
I haven't tried the Ultra Hybrid but I ordered it a couple of days ago. Kinda wishing I ordered the Spigen Slim Armor instead.
Got myself the Ringke Fusion Hybrid Hard Case. Extremely light while also providing a high level of protection from bad drops and scratches. Definitely worth the $13. The only issue I have is that just below the power button side, the casing seems to be slightly loose although that didn't make any difference to the protection provided by the item itself.
Anyone else having the same issue? Any way to fix it?
My review score: 8.5/10
Would have given a 9 if not for this minor issue but it doesn't take away much
Does the ringke fusion fit snug? I heard that the spigen ultra hybrid is a bit loose and dust will collect inside the case.
Sent from my SGH-T999 using Tapatalk
I ended up getting the Ringke Fusion and I love it. It's very thin and light. Compared to my other case (Spigen Slim Armour), the Fusion feels more "naked" (as if I wasn't using a case). So far I've been using the Fusion a lot more now that I tried them both for a week.
Just wanted to add I've been using a Fusion Hybrid because it has solved an annoyance for me. Case-less my N5 was vibrating violently at high speaker volumes and that has completely disappeared since using the tightly fitted Fusion. Also my Shure earphones fit just fine so for those reasons I'd recommend the case.
It does have a bit of edging work that isn't 100% smooth and the headphone slot has a gap which can let in dust at the back. However that is probably why headphones fit properly.
Bleys43 said:
You'll like the fusion, then. The button feel is perfect.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
You're right about the buttons. They are perfect. However, the rest of the case, I'm not too impressed. I have the same complaint as others about the sharp edges. It's really uncomfortable to hold it to your ear. I may try the sandpaper to knock down the edge a bit. I like that the USB port does not have a gap to the inside of the clear back but still wondering why the headphone jack does. Overall, not bad at all for an $8 case.
If Spigen fixed the buttons on the Ultra, I'd be back on that case in an instant.
klin1344 said:
Does the ringke fusion fit snug? I heard that the spigen ultra hybrid is a bit loose and dust will collect inside the case.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I am also curious about this. I have the Ultra Hybrid and this is my biggest complaint.
Sent from my Nexus 5
I own both and they're both essentially identical, but if I had to choose it would be the Spigen because it's slightly better. I don't use either of these however.. I miss my UAG case and the closest thing to it that I could find was the Spigen Slim Armor.
---------- Post added at 12:18 AM ---------- Previous post was at 12:14 AM ----------
miketn said:
I ended up getting the Ringke Fusion and I love it. It's very thin and light. Compared to my other case (Spigen Slim Armour), the Fusion feels more "naked" (as if I wasn't using a case). So far I've been using the Fusion a lot more now that I tried them both for a week.
Click to expand...
Click to collapse
My experience is quite the opposite. I wasn't happy with neither of two cases mentioned in this thread and I'm now using the slim armor. Not sure I agree with you on the "nakedness" and the slim armor basically adds no more bulk to the phone than the other cases do... I definitely feel a lot more comfortable with the slim armor case since it's not slippery.
read all reviews
all are mixed reviews.
cant decide
Having problems with spigen hybrid case keeps pressing power and volume buttons on its own, keeps making bug reports some how
Sent from my Nexus 5 using Tapatalk
Wildcat117 said:
Ignoring the 87 other posts regarding these 2 cases. I have the Rearth. It's nice. Doesn't fit perfectly with dbrand skin and xoskin says more good about tolerances than bad.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
i was curious why Ringke Fusion doesn't fit perfectly with dbrand skin, what's wrong?
also, how annoying are the rough edges of the case would you say?
are there any other alternative cases exposing the back worth considering?
thanks
Sent from my Galaxy Nexus
edit:
what about the SUPCASE Unicorn Beetle Case, any good?
I haven't seen one of these around yet so I opening one for debate. Is there a specific case that you fell in love with but never made their way around to our devices?
For me, it's the spigen's slim armor case. What is yours?
cellphoner2006 said:
I haven't seen one of these around yet so I opening one for debate. Is there a specific case that you fell in love with but never made their way around to our devices?
For me, it's the spigen's slim armor case. What is yours?
Click to expand...
Click to collapse
wish we could get a shark eye .. http://news.cnet.com/8301-17938_105-20065853-1/sharkeyes-tough-case-shutters-your-iphones-screen/
wish I had a case written on it ( iphone sucks )
Wish someone would design a stylish skin which will go with my zerolemon 7000mAh extended battery
Sent from my i9300 using xda app-developers app
I've seen a iphone case with bacon and eggs stuck on the back. Wish I could get it for my S3. Bacon makes everything better.
Pointless thread?
Sent from my GT-I9300 using Tapatalk
Point?
cellphoner2006 said:
I haven't seen one of these around yet so I opening one for debate. Is there a specific case that you fell in love with but never made their way around to our devices?
For me, it's the spigen's slim armor case. What is yours?
Click to expand...
Click to collapse
http://www.ebay.com/itm/15114250101...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
someone has "styled" it from s4 to s3.
f0xy said:
Pointless thread?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Jacky0501 said:
Point?
Click to expand...
Click to collapse
It gives people an opportunity to maybe find something similar - recommendations by other in the forum. If you think its pointless you didn't have to post in here.
smiley9k said:
http://www.ebay.com/itm/15114250101...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
someone has "styled" it from s4 to s3.
Click to expand...
Click to collapse
Thanks! I was actually looking into these generic cases but I read that the cases begin to crack after some time and that the plastic shell was "cheap" material =[.
Vossen makes kickass phone cases for the iPhone >.<
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I am looking for a case with luxury brand like Louis Vuitton or Hermes. It does not have to be OEM but at least made of genuine leather. I have not found one from a website that is not a scam. Maybe somebody can point me one. Thanks.
More Kickstands
I wish more companies would release 2 models. One with a kickstand and not. So convenient when you need it and not in the way if you don't.
cellphoner2006 said:
It gives people an opportunity to maybe find something similar - recommendations by other in the forum. If you think its pointless you didn't have to post in here.
Thanks! I was actually looking into these generic cases but I read that the cases begin to crack after some time and that the plastic shell was "cheap" material =[.
Click to expand...
Click to collapse
i had the china spigen neo hybrid and those plastic crack within a a couple months but then again i drop my phone a couple times. haha
i just got the slim armor one today and it seems sturdy but its also a bit thicker than the neo hybrid. the buttons are really touch sensitive tho.
i really like the neo hybrid but that damn plastic just cracks too easy.
smiley9k said:
i had the china spigen neo hybrid and those plastic crack within a a couple months but then again i drop my phone a couple times. haha
i just got the slim armor one today and it seems sturdy but its also a bit thicker than the neo hybrid. the buttons are really touch sensitive tho.
i really like the neo hybrid but that damn plastic just cracks too easy.
Click to expand...
Click to collapse
i totally agree with you! The neo hybrid was one of my original choices as my daily case but the mid frame plastic seems too flimsy to me. How do the buttons feel on your slim armor, click-y, or flat like some TPU cases?
cellphoner2006 said:
i totally agree with you! The neo hybrid was one of my original choices as my daily case but the mid frame plastic seems too flimsy to me. How do the buttons feel on your slim armor, click-y, or flat like some TPU cases?
Click to expand...
Click to collapse
the volume buttons are clicky after some adjustment but the power button can be sometimes really sensitive or clicky
Zizza said:
Wish someone would design a stylish skin which will go with my zerolemon 7000mAh extended battery
Sent from my i9300 using xda app-developers app
Click to expand...
Click to collapse
http://www.amazon.com/Warranty-Zerolemon-Orange-Samsung-Galaxy/dp/B00H2UKNXK/ref=sr_1_3?s=wireless&ie=UTF8&qid=1388985862&sr=1-3&keywords=viper+black+zero+shock
This is a heavy duty 3 layer case that fits on the zerolemon extended batteries. I just ordered one myself.
Edit: I know the link is for the Note 2, but they do make them for the s3. Its just an example
I have the Ringke Slim and while I love the case I don't love the exposed top and bottom edges. I went on to try the Spigen Slim Armor but I'm not pleased with the sharp edges at the bottom, the added bulk, or the tactile feel of the buttons. Too difficult to press. The phone seems decently protected but I'm just not happy.
I want something like the Ringke Slim with full edge protection but I can't seem to find it. Any suggestions?
Thanks for your help!
Check out Amazon.
Sent from my Nexus 5 using Tapatalk
grneyez said:
Check out Amazon.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Super helpful response. Thanks. You are a true testament to crowd sourcing!
You want to be a ass? Try doing something yourself.
Sent from my Nexus 5 using Tapatalk
grneyez said:
You want to be a ass? Try doing something yourself.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
an*
Also, the only slim case I've been able to find is the crystal slim case by spigen. It probably scratches real easy, though!
http://www.amazon.com/PROTECTION-Sp...86946026&sr=8-1&keywords=slim+crystal+nexus+5
grneyez said:
You want to be a ass? Try doing something yourself.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Says the guy that flies by the thread with a one-liner to search Amazon. Like I said, super helpful. I had a specific request. I didn't ask "where can I find cell phone cases?" You are the ass with the useless response. Just trying to troll my help request. The only way your response could be more unhelpful would be if you said "Try searching online." Please go away if you have nothing constructive to contribute.
If anyone has a specific recommendation for a brand or model I'm all ears. I've spent a considerable amount of time on Amazon, eBay and elsewhere searching and haven't found it so perhaps what I'm looking for just doesn't exist.
KiNG OMaR said:
an*
Also, the only slim case I've been able to find is the crystal slim case by spigen. It probably scratches real easy, though!
Click to expand...
Click to collapse
Thanks! Do you know off hand I'd that's tpu or poly?
Also, I laughed out loud at your "an" correction! Ha!
KiNG OMaR said:
the only slim case I've been able to find is the crystal slim case by spigen. It probably scratches real easy, though!
http://www.amazon.com/PROTECTION-Sp...86946026&sr=8-1&keywords=slim+crystal+nexus+5
Click to expand...
Click to collapse
Second to that. It's the only rigid case covering top and bottom I could find.
Znamir81 said:
Second to that. It's the only rigid case covering top and bottom I could find.
Click to expand...
Click to collapse
Thanks!
Znamir81 said:
Second to that. It's the only rigid case covering top and bottom I could find.
Click to expand...
Click to collapse
I just checked it out. Looks great but its polycarbonate
Why is no one making a slim TPU case like the Ringke that covers all the edges? I found tons of knockoffs on eBay but still no edge protection on any of them. Weird.
There's always "that guy" in these threads. sad.
I know it's tpu but the diztronic probably offers the best protection to slim ratio. I have them for my GS3 & 4 (also have Ringke slims) . I personally don't like them after experiencing the Ringle slim though and that's what I prefer. The Ringke actually does offer decent top and bottom edge protection as it comes up above and below the phone edges. It would have to fall just right to hit the phone edge. One thing I dislike the most about diztronic is how cheap it looks and how cheap it makes the phone look. Totally takes away from the N5 looks imo
You can lightly sand the Ringke slim sharp edges. It really works.
The ever growing more popular unobtainable LG hardcover covers the top edge. Good luck finding one though
Protection vs slim vs materials = tradeoffs
GL!
Sent from my Nexus 7 using XDA Premium 4 mobile app
KiNG OMaR said:
an*
Also, the only slim case I've been able to find is the crystal slim case by spigen. It probably scratches real easy, though!
http://www.amazon.com/PROTECTION-Sp...86946026&sr=8-1&keywords=slim+crystal+nexus+5
Click to expand...
Click to collapse
I recommend against the spigen crystal shell. Too tight might as well go caseless
Sent from my Nexus 5
---------- Post added at 07:43 AM ---------- Previous post was at 07:42 AM ----------
I would go with Luvitt. Mix of tpu and clear hardcase
Sent from my Nexus 5
jbdan said:
The ever growing more popular unobtainable LG hardcover covers the top edge. Good luck finding one though
Click to expand...
Click to collapse
Is this the quick cover or something else? Link?
By the way, I do have the Ringke Slim. The sharp edges are on the Spigen Slim Armor. I sanded it a bit but I'm just not thrilled with the button feel mainly. That's the biggest issue. We'll see if it grows on me.
Thanks for the response!!
DannyBoy7783 said:
Is this the quick cover or something else? Link?
By the way, I do have the Ringke Slim. The sharp edges are on the Spigen Slim Armor. I sanded it a bit but I'm just not thrilled with the button feel mainly. That's the biggest issue. We'll see if it grows on me.
Thanks for the response!!
Click to expand...
Click to collapse
Thread just below this one titled "LG Hardshell".
Ah okay yeah I was talking about the ringke slim didn't catch the bit about you having the spigen slim armor.
http://forum.xda-developers.com/showthread.php?t=2548058
Sent from my Nexus 7 using XDA Premium 4 mobile app
jbdan said:
Thread just below this one titled "LG Hardshell".
Ah okay yeah I was talking about the ringke slim didn't catch the bit about you having the spigen slim armor.
http://forum.xda-developers.com/showthread.php?t=2548058
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a great looking case. Let's hope it actually materializes soon. Seems like it is exactly what I want. Still a little exposed along the bottom but better than the Ringke and it has the Nexus logo. Awesome!
DannyBoy7783 said:
That's a great looking case. Let's hope it actually materializes soon. Seems like it is exactly what I want. Still a little exposed along the bottom but better than the Ringke and it has the Nexus logo. Awesome!
Click to expand...
Click to collapse
You'll never have a hardcase that provides coverage for all 4 edges and all 4 corners.
There needs to be physical bending points so you can get the phone in and out. If you had all 4 corners and edges covered it would not be possible because of the rigid material it is made of. A 1 piece hardcase by design, can never offer full protection.
TPU/Gel cases can do this because they are soft and can bend/stretch easily, hard plastic doesn't. It gives a little bend, then it snaps.
The LG Hardshell comes closest, but the exposed bottom is necessary so you can physically bend the sides out and slide the phone in. It does have the best bottom protection I've seen though, as the corners wrap further towards the centre.
mmmmBACON said:
You'll never have a hardcase that provides coverage for all 4 edges and all 4 corners.
There needs to be physical bending points so you can get the phone in and out. If you had all 4 corners and edges covered it would not be possible because of the rigid material it is made of. A 1 piece hardcase by design, can never offer full protection.
TPU/Gel cases can do this because they are soft and can bend/stretch easily, hard plastic doesn't. It gives a little bend, then it snaps.
The LG Hardshell comes closest, but the exposed bottom is necessary so you can physically bend the sides out and slide the phone in. It does have the best bottom protection I've seen though, as the corners wrap further towards the centre.
Click to expand...
Click to collapse
If it was a softer TPU I think it would work without too many issues.
I think I'm going to try the Diztronic case. It seems like the closest thing to what I'm looking for that I can actually get my hands on right now. I'm not excited about the buttons and may need to cut them out. I love the cutouts on the Ringke Slim. They work perfectly. Third time's the charm right?????
DannyBoy7783 said:
If it was a softer TPU I think it would work without too many issues.
Click to expand...
Click to collapse
Sure, but then it would be a TPU case and not a hardcase.
mmmmBACON said:
Sure, but then it would be a TPU case and not a hardcase.
Click to expand...
Click to collapse
When this LG hardcase was mentioned it didn't fully dawn on me that it was a rock hard solid plastic case - I'm a little dumb, I realize that. You are correct on all accounts.
Is the Ringke TPU? It is pretty firm. If the top and bottom were totally covered like most other cases except for a tiny bit maybe in the center (of the top and bottom edges) to provide a flex point when getting it off I think that would be perfect. Oh well.
Obviously these manufacterers should have consulted me!
Hey guys.
I just bought a black nexus 5 and I am looking for a case.
I come from an iPhone, which has a LOT of case offer xD
So I was just wondering which cases do you guys personally use and which ones would you recommend.
I don't know if this is the right place to post this, so I apologize in advance :-/
J.Diogo said:
Hey guys.
I just bought a black nexus 5 and I am looking for a case.
I come from an iPhone, which has a LOT of case offer xD
So I was just wondering which cases do you guys personally use and which ones would you recommend.
I don't know if this is the right place to post this, so I apologize in advance :-/
Click to expand...
Click to collapse
I personally use the zerolemon battery case its amazing.
When I'm at home I use my spigen slim armor.
Both are great. The ultra hybrid isn't very good due to dust getting in the case
I like the fact that the spigen slim armor has the tow parts that you can change, its pretty cool!!
Thanks for your answer.
I use the tech 21 impactology case. Doesn't look like much but its probably saved my N5 2 dozen times already.
Beauenheim said:
I personally use the zerolemon battery case its amazing.
When I'm at home I use my spigen slim armor.
Both are great. The ultra hybrid isn't very good due to dust getting in the case
Click to expand...
Click to collapse
The older version used to allow dust getting in.
I have the "updated" model, pretty much air-tight.
Only downside is the shiny back, but I love my case! :angel:
I bought a "Ringke Slim case" in white off Amazon UK. Very nice fit, but get the rubberised version. The white one is as slippy as a bar of soap :silly: Other than that, a case for a bargain price, with a great fit and overall quality!
I really like my black wallet case. :good:
here's mine fits and feels great
http://www.aliexpress.com/item/SGP-...r-LG-Google-Nexus-5-D820-D821/1846356319.html
I use a black ballistic case. It's not as huge as an otter box defender but more protective than a commuter
Sent from my Nexus 5 using XDA Free mobile app
spigen slim armor or spigen ultra fit
Sent from my Nexus 5 using XDA Premium 4 mobile app
I use a Spigen Ultra Hybrid. This thing has amazing drop protection while not making your phone look like a brick
FLASHMINATOR said:
here's mine fits and feels great
http://www.aliexpress.com/item/SGP-...r-LG-Google-Nexus-5-D820-D821/1846356319.html
Click to expand...
Click to collapse
hey, are the buttons "clicky" with that bumper?
th3xeroeagle said:
hey, are the buttons "clicky" with that bumper?
Click to expand...
Click to collapse
I don't know what u mean but anyways u can easily click the buttons no issues at all
I use http://www.rearthusa.com/google-nexus-5-slim-pc-hard-case
It's slim,light and dosen't bulk up the phone.Love it!