Develop Bugs

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:

Good Job done
Built from source or using web builder?

i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted

Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..

i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY

ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.

Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!

vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????

great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone

There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?

I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app

Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app

fail root
plz send device manager screen shot

Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz

Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?

vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.

Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

Guide for Flashing Stock ROM On Galaxy Y GT-S5360

Hai Friends this is BlackPearl Junior Member and here i am going to share a bit of information I Know.
Flashing the Galaxy Y using Odin back to its Stock ROM
Important Notice
*******************
*Do it on your own Risk.Me or the Devs of the linked pages below are not responsible for any mistakes you commit
and damage you bear to you device
Requirements
*****************
*First Download your Requred Stock ROM based on your country from the below link
http://forum.xda-developers.com/showthread.php?t=1465800
*Secondly you should have ODIN Get it from the below link
http://forum.xda-developers.com/showthread.php?p=35934961#post35934961
*Kies must be installed in you PC then only you can get the connectivity driver for your device
*Then what your samsung galaxy y and its data cable to connect with your PC
Steps
********
*Close Kies and better terminate it by CTRL+ALT+DEL and opening Taskmanager>>Processes>>KiesPDLR>>rightclick>>EndProcessTree
*Open ODIN in your PC
*Select the necessary files to PIT, BOOTLOADER, PDA,PHONE (MODEM) and CSC.
*Check Re-partition, AutoReboot and F.Reset Time.
(Only for flashing Stock ROM completely.For Flashing baseband and CSC alone you dont need to repartition)
*Dont Connect your Device Now.
*First Switch off you Device
Recommended
you can even select "Reboot in Download Mode" from the Boot menu of your Custom ROM
But this method is not quite advice-able coz some custom rom doesn't allow to boot in download mode so switch off do it manually
*Now turn on you device in Download mode
Do this by simply pressing the Volume Down+Power Button+Home Button simultaneously
till you see a warning
*Press Volume Up to continue to Download Mode
*After seeing Downloading connect the Data Cable to the Device
*See the ODIN on Your PC
*You will see the port number highlighted in yellow colour if your device is connected properly
*Now select Start and dont disturb both the device and your PC.
*After you see PASS in ODIN your device reboots and do a small installation in recovery mode and then it reboots automatically you have to do nothing.
*After you see that your Device is booting you can disconnect your device.
Thats it you had flashed the Device with Stock Rom which you can even update using Kies.
Hit thanks if you find useful
Got lot of help from many devs of xda

file system
will this convert file system from ext4 to rfs?

nmpnik said:
will this convert file system from ext4 to rfs?
Click to expand...
Click to collapse
Yes it will
But OP we already have similar guides
no problem anyway btw make it more illustrative !

Thread closed as this is essentially a duplicate guide.
Jonny

How to unlock bootloader on Note 2

Hi there,
This may seem like a daft question but i have just rooted my Note 2 using Odin and i went ahead and installed CWM from the play store.
However, i don't seem to have the option of making a backup of my current ROM.
All it gives me is (in blue)
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache.
This worked on my HTC One X, am i doing something wrong? My Note 2 was purchased as SIM free from phones4u.
I'm on android version 4.1.2, baseband version N7100XXDLK7, BUILD NO. JZO54K.N7100XXDMB2., MODEL NO. GT-N7100.
Could my bootloader still be locked? Is this causing the issue?
Any help would be much appreciated!

Just flash CWM/TWRP recovery.
Here is one of it
http://forum.xda-developers.com/showthread.php?t=2028103

Loading default android recovery even though TWRP successfully installed
Hi,
I am not sure if I should've started a separate thread for this, please move this if this has to be a separate thread but I've mentioned below why I am posting here.
My phone Galaxy note 2 International version GSM is rooted and I installed TWRP through Goomanager and I got a message stating that "Recovery was successfully installed". After this I shut down the phone and pressed Volume up + Home + Power to go into recovery mode and it still goes into the Android default recovery mode. I tried installing it again and still faced the same issue.
Since I was having a problem, I thought I will install TWRP through Odim 3.7. So, I connect PC to my phone and downloaded the openrecovery-twrp-2.3.1.1-n7100.img.tar.md5 and opened Odim in administrator mode and clicked on PDA >> Start. Within a second I got an error stating "odin downloader has stopped working". I went to task manager and shut down Samsung KIES and tried again but still got the same error.
Next, I tried using the Samsung Note 2 Toolkit. Before I installed TWRP through option 5 in the toolkit, I wanted to Rename Recovery Restore files (if present) as suggested by the toolkit. When I chose this option, I get an error stating adbd cannot run as root in production builds. When I googled this error, it went to a post which said that the bootloader needs to be unlocked.
But then the previous post says that I need TWRP for unlocking the bootloader and I'm doing all this to first of all install TWRP.
Apart from this, as additional Info, when I open ROM Manager - Under Recovery Setup - Current Recovery is Team Win Recovery Project. When I choose to reboot in Recovery mode from the application, it goes to the Android System Recovery. No matter what I do, TWRP recovery just does not seem to open up.
I'm pretty clueless now as to what other options I have or if I have messed up somewhere
Any suggestions would be appreciated.
Thank you

its already unlocked :good:
all u need costume recovery ( TWRP or CWM )
TWRP is far better IMO
http://forum.xda-developers.com/showthread.php?t=1938733

yahyoh said:
its already unlocked :good:
all u need costume recovery ( TWRP or CWM )
TWRP is far better IMO
http://forum.xda-developers.com/showthread.php?t=1938733
Click to expand...
Click to collapse
Hi yahyoh -
The problem as I've described in my post is that I am unable to go into TWRP Recovery mode, I've installed the scripts using goomanager several times but when I shut down the phone and press volume up + Home + Power, it goes to Android Recovery mode and not the TWRP Recovery mode.

gr8one said:
Hi yahyoh -
The problem as I've described in my post is that I am unable to go into TWRP Recovery mode, I've installed the scripts using goomanager several times but when I shut down the phone and press volume up + Home + Power, it goes to Android Recovery mode and not the TWRP Recovery mode.
Click to expand...
Click to collapse
ok forgot goomanager it never worked for me
just download the tar version open odin put it in PDA put ur note 2 in download mode and connect it to ur pc wait for the blue color to show on ID:COM and press start
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( and make sure kies is fully closed )

Tried that
yahyoh said:
ok forgot goomanager it never worked for me
just download the tar version open odin put it in PDA put ur note 2 in download mode and connect it to ur pc wait for the blue color to show on ID:COM and press start
( and make sure kies is fully closed )
Click to expand...
Click to collapse
Yahyoh,
Thank you for your response but if you see my original post, I have mentioned that I had already tried Odin 3.7 and put my phone in download mode and got the blue color showing ID: COM but when I pressed start, Odin gave an error stating odin downloader has stopped working and the only dialog box was to close. So, once I press START, I get a error message in a second and have to shut down. I did make sure that I have the correct tar version as I downloaded from TWRP's website directly for N7100. I did make sure that Kies was also closed.
After this I tried using Toolkit and that didn't help as well. Kinda going crazy why such a simple thing is getting to become a irritating problem, been sitting on this for the past 4 hours.

try to run odin as administrator

ran odin as administrator
yahyoh said:
try to run odin as administrator
Click to expand...
Click to collapse
Yes. I did run odin as administrator all the time.

try on another PC ? try to download odin again ? try another cable ?

yahyoh said:
try on another PC ? try to download odin again ? try another cable ?
Click to expand...
Click to collapse
I have tried downloading odin 4 or 5 times. The cable I have is brand new samsung cable. Right now, I dont have another pc but might have to go to a friends and try if that helps. I do have a mac but not sure if there is mac version of odin. I'm attaching a picture of what I see when I press volume up + home+power.

abhijitdroid said:
Hi,
1. Check that USB drivers are properly installed.
2. Your USB cable is proper and allows you to charge your phone as well as copy data from your PC.
3. Change USB port and try again. (This has worked in my case)
Click to expand...
Click to collapse
Usb drivers are installed properly. PC reads the phone as soon as itd connected. Tried three different usb ports that is available in my laptop. The phone does get charged when it's connected and I'm able to transfer data. Only thing left to try is a different pc.

Since ur already rooted, y not flash via mobile odin app? Untar to internal storage and rename the twrp image to recovery.img (btw theres a newer v2.5.0.2) and let mobile odin look for it.
Or u can dump the image directly to ur recovery partition using terminal apps:
Code:
su;
dd if=/storage/sdcard0/recovery.img of=/dev/block/mmcblk0p9 bs=4096;
sleep 5;
reboot;

Nazar78 said:
Since ur already rooted, y not flash via mobile odin app? Untar to internal storage and rename the twrp image to recovery.img (btw theres a newer v2.5.0.2) and let mobile odin look for it.
Or u can dump the image directly to ur recovery partition using terminal apps:
Code:
su;
dd if=/storage/sdcard0/recovery.img of=/dev/block/mmcblk0p9 bs=4096;
sleep 5;
reboot;
Click to expand...
Click to collapse
Hi Nazar78,
Mobile odin app is not free, it needs to be purchased. I already have the twrp image in the internal storage and was looking around if there was a free version of mobile odin app somewhere but couldn't find it.
I do not know how to use terminal apps and not familiar with the commands etc. So didn't wanna try that and mess it up. As a temporary solution I have installed CWM latest version using Rom manager but TWRP would be much better as it seems to be more user friendly.
If you could tell me how to enter this terminal apps page, I will probably follow the codes you have given and see if that helps.
Thanks

just install Android Terminal : https://play.google.com/store/apps/...251bGwsMSwxLDEsImphY2twYWwuYW5kcm9pZHRlcm0iXQ..
then type via keyboard what @Nazar78 wrote in the terminal

Just download any free terminal emulator app from play store and enter those commands per line each.
Btw u mentioned previously about adbd can't run on prod builds, its because the adbd binary in ur rom is stock, u need a patched one. Look for app called adbd insecure by CF. Or any custom builds should do the trick...

To flash recovery, tou need not to have paid version of mobile odin
Wait updating this post with link
Edit : here is mobile odin lite
http://forum.xda-developers.com/showthread.php?t=1347899
Download attached mobile odin lite from post 1
Then download flasher kernel from post 7
(download 5.0 versiin) and install
Then open mobile odin Select recovery tab, point to recovery file (tar/img) and flash
Sent from my GT-N7100 using xda premium

Thank you
Thanks Nazar78, Yahoyoh and Ketan, It's about 1:30am now, so I'm gonna shut down now and try these tomorrow. WIll get back with updates. Appreciate.

Also if you have installed EMET, a Microsoft software to stop security exploits, disable it.
It's cause me issues in the past.

I've also seen reports of people not having odin running properly when the kies process runs in the background. This was always the case when flashing with the Galaxy s, and might be a rare occurance with the note 2 too.
Sent from my GT-N7100 using Tapatalk 2

[Guide]how to root micromax a65(developing section)

phone information
name:-micromax a65
chipset-sc 6820a
processor-armv7(rev1)(single core)
graphics-mali300
ram-512mb
android os-2.3.5
As preivious thread which was made by sayannayas that was flooded so freshing the whole section into one thread with updated insecure boot.img and with flashing updated stock rom.
original thread:- http://forum.xda-developers.com/showthread.php?t=2333647
before starting 1st read this:- i'm not responsible if any damage is done to your device.also if you flash your device using reasearch downloader then you will bump your imei(**you can revert your imei back which is given in this tutorial).
rooting section:-
1)First Unlock the Boot IMG
(download section)
as previous boot.img were v4 this is v5 (**fixed auto off)
download insecure boot.img from here :- http://www.mediafire.com/download/yakdfcry7z2j1jc/insecure_boot_img_for_v5.rar
download downloader tool and drivers from here:- http://www.mediafire.com/?3dm2gle96wi9ak5 (**signed for windows 7)
stock firmwire from here:- http://www.4shared.com/rar/6nhWxvMA/GST_A36_M13_A65_MMX_44_E_V16_2.html (auto off fixed,camera improvment)
**(for windows 7 users only)
links for driver enforcement overrider:- http://www.softpedia.com/get/Tweak/Video-Tweak/Driver-Signature-Enforcement-Overrider.shtml
**(if you want using windows xp from windows 7 then use it)
link for virtual box:- http://dlc.sun.com.edgesuite.net/virtualbox/4.3.0/VirtualBox-4.3.0-89960-Win.exe
(guide)
(things which you needed)
1.windows XP (ps- for all drivers compatibilty) ( strongly suggested)
or
windows 7(currently not working)
**(note- you will this things...1.driver enforcement overridder for turn on test mood 2. you have to run reasearch downloader in admin mood)
or
you can use virtual box too to run windows xp
4. in device manager you need -ABD interface,two COM ports,two emulators
**(note-If any of this having yellow sign it will not work).
Ok now take a long breath beacuase you have to flash with your phone with a stock rom and modified boot.img for rooting.
Open research download
1.click on first button and load pac file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.click on second button change baudrate to 115200,in calibration tab uncheck all.
3.For BOOT_IMG option browse and select the unlockedboot.img that you downloaded now.
4.plugin the usb cable(DON'T plugin the phone now)
5.click on play button
6.PRESS & HOLD VOLUME UP KEY and insert the usb cable,don't release the key.
Download should starts within 3 secs.If it doesn't then check the drivers carefully or reply to this thread with failures.
Once done unplug your phone and remove battery for 3 second.
7.Reinsert battery and restart your phone.
YES!! you have successfully unlocked the boot.img
2)installing cwm(optional-not required in rooting)
**(note you cant do full backup using cwm i will tell you after sometime how to do that)
1.Download .andriod.zip,extract it and save it under C:\Users\<computer name>\<paste it here>
http://www.mediafire.com/?4xs85rxq8478vm4
2.From your phone got to application-->developer option-->enable usb debugging
3.Now plugin your phone through micro usb cable.
4.Download this zip ,extract and place "platform-tools" folder inside under c:/<paste it here>
http://www.mediafire.com/?5w9n01y735xsqwt
5.download recoverey image from here :- http://www.mediafire.com/download/ombw47p3vyrbh2o/recovery.img
and palce it under c:/platform-tools
5.Open a command prompt type
Code:
cd C:\platform-tools
C:\platform-tools>fastboot devices
20080823 fastboot
Note:you will NOT be able to proceed further if this doesnt shows up.Double check the andriod.zip has adb_usb.ini file.
Now we will flash a custom recovery image in fastboot mode.REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS TOTALLY DEAD .
Code:
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
7.Reboot your phone.
8.to go to cwm Open a command prompt type
Code:
cd C:\Android Multi tool
C:\Android Multi tool>adb reboot recoverey
**(note-you cant go cwm uding vol+power button in this v5 rom i dont know but hardware mapping button seems not working with cwm)
3)rooting
there is two way of rooting 1st way you can simply find from here :- http://forum.xda-developers.com/showthread.php?p=42926184#post42926184
and the 2nd way starts from here
download this tool(unlock root):- http://www.mediafire.com/download/54iee9z75y9qu4a/Unlockroot.rar
1.make sure you turned on usb debbuging and as well unknown source
2.connect usb cable via mass storage
3.after extracting the rar file open unlockroot.exe
4.just click on root and choose you device .
5. atlast it will say it wants to install a battry saver app i dont know what is that i ignored it do what you want.
5.it will say to reboot your phone and yes you are rooted
------------------------------end of rooting section,flashing stock rom-----------------------------
**important
tutorial for bumped imei(if you have problem only then):-
Tutorial can be found here : http://forum.gsmhosting.com/vbb/f606/china-spd-adnroid-phone-imei-change-just-one-click-1672805/
& here is the download link : http://www.4shared.com/rar/TqGNXb-L/Android_SPD_IMEI_Writing_Tool_.html
themepacks,extra addons and custom rom section
currently no developers available and i'm totally new bie :'( so i'm trying my best as much as possible
please if anyone interested welcome
1.themepacks
1. by me
use cwm
link- http://www.mediafire.com/?f4wfs9ycmin471u
screenshot:-
2.by a user shankystyle
just replace this file with root explorer here system/app
link:- http://www.mediafire.com/?78v3qedm34fm5tc
screenshot:-
2.addons
1.bravia engine:-
http://forum.xda-developers.com/showpost.php?p=44487763&postcount=138
**(found some performance improvements actually its impossible but got improvements in games)
2.racoon enchancer for audio:-http://forum.xda-developers.com/showthread.php?t=2155192
working on a custom rom i dont know it will build or not but will try my best and sorry for my bad English.will fresh the thread as soon i get time.thank you
signing out

I tried to root... but download is not starting in Research Download....I'm using windows xp.. no yellow marks in device manager, my phone is Bolt A65

install theme
how to install theme plse tell me

andy1234567 said:
I tried to root... but download is not starting in Research Download....I'm using windows xp.. no yellow marks in device manager, my phone is Bolt A65
Click to expand...
Click to collapse
you should install the drivers correctly

stuck with download
Download not started and i am using windows 7 ,i checked drivers as you say but it will not help me
so please help me

after trying something in rootx v2.1 My both sim cards not detecting and device manger also showing yellow mark under usb controlers .. :crying: what to do now.....please help

andy1234567 said:
after trying something in rootx v2.1 My both sim cards not detecting and device manger also showing yellow mark under usb controlers .. :crying: what to do now.....please help
Click to expand...
Click to collapse
-_- 1st try to flash your stock rom..and install your drivers correctly..

pgpiyush3 said:
Download not started and i am using windows 7 ,i checked drivers as you say but it will not help me
so please help me
Click to expand...
Click to collapse
actually strongly suggested is to use windows xp..i didnt remeber how i installed drivers but i'm trying to finding out.and meanwhile use windows xp in virtual box or anything

auto off is not fixed
after installing unsecured boot image my phone automatically went off

sssomnath474 said:
-_- 1st try to flash your stock rom..and install your drivers correctly..
Click to expand...
Click to collapse
please guide me.....how to do that ?

A small request to all of you guys
just one request to all of you guys...please don't quote the OP.If you want to quote something from the OP,then keep only that line in QUOTE braces.Quoting an OP is not a good practice,it unnecessary elongates the post and causes unnecessary load to the server ,not to mention makes monitoring the posts difficult. Lets not make this post have the same faith like the post from which it got inspiration.

Bro i tried flashing the new rom but then i'm getting an error like failed:wait input timeout ; now my phones stuck in boot loop and cant be flashed with the old stock rom as well......i still dont know the problem why it gets failed...all the drivers are properly working still the problem persist...Please Help!!!

sssomnath474 said:
-_- 1st try to flash your stock rom..and install your drivers correctly..
Click to expand...
Click to collapse
even i got d same error pls hepl!!!!!

how to get network access after flashing
pls help!!
both sims network iz dead

My phone was under warranty so .they fixed my Sim card issue ....thn again I tried to root my device using following instructions under Windows 7 test mode
step---5)---switch off your cell and in the pc start downloade select .pac file( firmware file ) go to settings set baud rate 115200 & desect everting leaving fdl1,fdl2 & boot.img ......right click on boot.img & select the boot.img u have downloaded from the upper link i have provided .......and go to callibration option and deselect everthing & then ok .....& download..............and now press the upper volume button and insert usb then it will start pushing in the new boot.img
remove and reinsert the battery
step---6)----now extract .android & multitool in c: drive
step---7)----press the volume down key and power button it will show fastboot mode
and now open command prompt and type
cd C:\Android Multi tool
C:\Android Multi tool>fastboot devices
20080823 fastboot
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
step---8)---download update.zip
and paste it in the memory card
step----9)---now start the phone pressing up volume key and power button and flash the recovery the u copied in the memory (now the power button works as ok button
Remove the battery and restart the phone thats it your phone is rooted
Now my phone is rooted... any suggestion on improving battery life ?????

you should to press volume up botton when your are inserting cable
 [MENTION=522570 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION]@@[/MENTION] note the first click the start botton and insert the cable to your phone [MENTION=522570 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION]@@[/MENTION]

andy1234567 said:
My phone was under warranty so .they fixed my Sim card issue ....thn again I tried to root my device using following instructions under Windows 7 test mode
step---5)---switch off your cell and in the pc start downloade select .pac file( firmware file ) go to settings set baud rate 115200 & desect everting leaving fdl1,fdl2 & boot.img ......right click on boot.img & select the boot.img u have downloaded from the upper link i have provided .......and go to callibration option and deselect everthing & then ok .....& download..............and now press the upper volume button and insert usb then it will start pushing in the new boot.img
remove and reinsert the battery
step---6)----now extract .android & multitool in c: drive
step---7)----press the volume down key and power button it will show fastboot mode
and now open command prompt and type
cd C:\Android Multi tool
C:\Android Multi tool>fastboot devices
20080823 fastboot
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
step---8)---download update.zip
and paste it in the memory card
step----9)---now start the phone pressing up volume key and power button and flash the recovery the u copied in the memory (now the power button works as ok button
Remove the battery and restart the phone thats it your phone is rooted
Now my phone is rooted... any suggestion on improving battery life ?????
Click to expand...
Click to collapse
if u tried v5 rom then that is the max battry u have no kernal is made till now

tejakumar said:
you should to press volume up botton when your are inserting cable
[MENTION=522570 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION]@@[/MENTION] note the first click the start botton and insert the cable to your phone [MENTION=522570 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION]@@[/MENTION]
Click to expand...
Click to collapse
i already mentiond

Easiest way to root :good:
DON'T DO SUCH LONG PROCESSES
Just Unlock your BOOT IMG by Resarch Downloader and while u are unlocking your internet connection must be active
and
then root with Vroot .the only problem is that vroot is in chinese language and superuser is also.so if u know chinese u can otherwise it dosen't affect much:good:
---------- Post added at 11:29 AM ---------- Previous post was at 11:22 AM ----------
I have rooted my micromax a65 but how will i install themepacks
I try to install 2.by a user shankystyle
just replace this file with root explorer here system/app
but my phone started not responding when i replaced and my phone hanged and is not starting :crying:
and i don't know how to flash throgh CWM
SO PLEASE HELP ME IN APLLYING THEMEPACKS

a110
can anyone tell me how to root A110

[Guide][Marshmallow] Android 6.0 official update for Micromax Canvas A1 (AQ4501)

Update: SPFlashTool flashable Marshmallow firmware file is now available. Build MOB30N.
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Download SPflashTool flashable Marshmallow firmware . Extract the zip file. You will see the following files in it (similar not exact)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note the location of MT6582_Android_scatter.txt file
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors

My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........

gd5121995 said:
My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........
Click to expand...
Click to collapse
flash official lollipop rom using method 2 above

Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??

GughanRk said:
Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??
Click to expand...
Click to collapse
sp flastool wipes userdata only, you wont loose your imei using spft.

sziraqui said:
sp flastool wipes userdata only, you wont loose your imei using spft.
Click to expand...
Click to collapse
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time

recover imei android one....
try this...worked for my spice android one (mi-498)
http://forum.xda-developers.com/cro...lashable-zip-imei-repair-android-one-t2992846

GughanRk said:
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time
Click to expand...
Click to collapse
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were ON during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.

sziraqui said:
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.
Click to expand...
Click to collapse
Thanks! I'll post an update when I come around to flashing the stock ROM. Don't have the time now.

hi can i use these update for micromax unite2(8gb) from lolipop to marshmallow.

Firmwares are device specific. You CANNOT install a this on any other phone. You will brick your phone by installing a ROM which is not made for your device

Please update stock marshmallow link sir as soon as possible
.......
Thanks in advance

Micromax android one got hang at marshmallow logo.
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?

ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.

ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.

sziraqui said:
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.
Click to expand...
Click to collapse
I have installed all drivers as my pc detect my mobile as i can see in device manager. I perform all steps that you mention but SP flash player show nothings. CAn you tell me can i flash Lollipop stock rom on my android one which is running marshmallow previously. I cant find marshmallow stock rom thats why i have to flash lollipop stock rom??

sziraqui said:
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Extract the the contents of factory image. [Edit: sp flashtool flashable Android 6.0 is currently not available. I 'll add a link as soon as it is available. I wrote this too early, sorry. For now, if you are running a custom rom, flash official lollipop first and then use method 1 to update to marshmallow.].You will see the following files in it.
Note the location of MT6582_Android_scatter.txt
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors
Click to expand...
Click to collapse
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.

MayankGupta said:
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.
Click to expand...
Click to collapse
I can help you if you provide me more details.
Which phone model you were dealing with? Which rom it it was running before? What were you exactly trying to achieve? Also if possible post the log files here.

xposed
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?

KadirDvl said:
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?
Click to expand...
Click to collapse
Yes there are xposed for MM.. Just google it.
[url]http://forum.xda-developers.com/xposed/discussion-xposed-marshmallow-t3249095 [/url]
Sent from my sprout4 using XDA Labs