Ouya Not Booting Properly - Ouya Q&A, Help & Troubleshooting

SO I have attempted to contact Ouya over the past few months with ZERO response. I'm hoping someone here can help.
So first up. I have no Internet where my Ouya is located. It had internet when I first got it and worked fine without it.
I have an Ouya and it worked flawlessly up until it would no longer get to the main splash screen. It kept asking for a wifi connection that HAD to have internet. Never did that before.
Then a few days later it would no longer boot properly. It now just sits at the little Ouya circle forever. We attempted to wait 3 days before giving up and shut it off. When I plug in a USB keyboard and attempt a ALT + PNT SCN + i the ouya just freezes.
Anyone able to help me out?
EDIT: I want to point out that I can connect the Ouya to my Windows 8 system and see all the files on the console.

airwa1kin7 said:
SO I have attempted to contact Ouya over the past few months with ZERO response. I'm hoping someone here can help.
So first up. I have no Internet where my Ouya is located. It had internet when I first got it and worked fine without it.
I have an Ouya and it worked flawlessly up until it would no longer get to the main splash screen. It kept asking for a wifi connection that HAD to have internet. Never did that before.
[..]
Anyone able to help me out?
Click to expand...
Click to collapse
If you havent installed adb yet => do it. After this you can use adb to start applications on your box. For beeing able to start an app it seems like you need to unzip the apk and look into the apps xml file to figure out the name of the method for starting it. (I really dont get it why there is no standard entry point for android apps?!) You can start system setup, an alternative launcher (Nova launcher works pretty) good and go into system settings for changing you wireless setup. Best is probably you hook youre box up somewhere with an 10Base-T Cable and configure the ethernet on the box.
Its said on the Ouya HP that this bug might result from a wrong clock setting. So you might want to check this before you do anything else. I had the same problem and did go away after hooking up my box via ethernet and reboot it a couple of times.
(I am pretty new to adb/ouya n stuff so there might be better solutions)
// Tycho

Related

Solved: Joying - Mirrorlink Stopped Working After Flash

Hey guys, I have searched high and low for a solution to this problem but have come up empty so far. I just got a joying head unit and everything, including the easy connected app, seemed to work without issue. I decided well since I had the headunit running next to my pc that I would flash Malaysk's custom rom before installing it. After that, I reinstalled the app from various sources including the oem app but none of them seem to allow me to connect my same exact devices anymore.
Why is this important for me? I had planned on controlling a tablet in the back seat for my son who is still to young to put on show without trouble. Essentially, this would allow me to never have to reach back there to help him out.
I have read, from joying, that it would no longer work after flashing new firmware but that seemed to not be the case from some things I had read here (please correct me if I am wrong on that). Tried different cables and ports but no luck. I did read that a license might need to be carried over but not sure what that entails as I can find ZERO info on this easy connected app/problem. I hope that this is a very simple fix and that I did not jump the gun again for the chance to flash a new device (its addicting and I blame XDA for my problems...).
I did try and find some other apps that might allow me to do the same thing. RemoDroid seemed promising but didn't function. Most other ones are meant for controlling from a pc or browser and just weren't useful for the task at hand. I am open to solid suggestions. I use all Android devices and avoid the Apple juice. Any insight you guys can offer will help a tired Dad out. Thanks!
Edit: Solved-ish
The easy connect app seems to function now intermittently. Not sure there was a specific thing that I did to fix it. Seems to work when I launch easy connect app right after booting up and nothing else. Messing with other apps seems to cause a problem for my devices. Also, switching between my devices(phone and tablet) may also have been causing a problem, not sure yet. I suppose I'll just keep trying to make it work reliably until I break it again.
On the previous version of the easy connect app, you were able to disable Drive Mode from launching. Not so on the newer version with Android WiFi. If anyone has a solution to that I would appreciate it as the Drive Mode app is useless for my needs.
Note 4 - USB - works great. I have yet to try over wifi
Note 10.1 N8013(lollipop rom) - USB/Wifi - works great (disable smooth mode, remote device screen cannot be turned on with easy connect "Home" button)
http://forum.xda-developers.com/and...1024x600-rk3188-joying-try-uploading-t3262030
I tried several different apk's but they all have similar results and end with a connection failure.
I haven't yet tried going back to stock firmware so that might be worth trying. I installed the headunit in my car so I'm not as willing to keep flashin it as I have to park down the street from my house.
So not sure what magic I used but I was able to get it working for a moment and then it stopped again. USB and Wifi android mirroring were working so I know my current firmware/setup is functional!! Once I got it working I started configuring some other apps and when I went to run it again it wasn't connecting. I guess I'll just keep messing with it until I can figure out what got it working again.
With the newer version of the easy connected app, I can no longer disable launching of drive mode on connect. Is there a way to disable that option with the 1.4 version?
Hi.
Is it possible mirror in wifi with android?
Can you explain the way?
Inviato dal mio SM-G920F utilizzando Tapatalk

Aftv 2015 remote stopped working

hello everyone as u see in the name of the topic
i live in CANADA and i bought this AFTV from US in december it has been working great till yesterday night when the remote went off and can't use it all and the box now is useless
is there a way to fix this cuz i can't download the amazon app in my tab or iphone since in canada is geographically restricted so now am stuck with it and more than that i used my keyboard trying to manually see what is happening and the remote was no longer recognized (batteries changed like 3 times with new ones ) and after that i pushed the usb debugging without reading the warning (dumb as i am) am beating my self to death now for that stupid move
so my first question is it possible to turn the usb debugging off thru the PC or tablet so i can use back the keybord
second is it possible that someone give me the amazon app for android tab samsung galaxy tab 3
and third is it possible that the problem comes from the bluetooth antenna of the fire tv cuz i tried to find the fire tv on my tab via BT it doesn't see it
After battery change I had to hold HOME button for 5 seconds to re-pair my remote.
As for your other questions, I have no idea.
Carthagenian12 said:
hello everyone as u see in the name of the topic
i live in CANADA and i bought this AFTV from US in december it has been working great till yesterday night when the remote went off and can't use it all and the box now is useless
Click to expand...
Click to collapse
i've attached the remote apk.
the remotes are poor. battery terminals get covered with chemicals that leak from the amazon basic batteries
oh and the user above is right regarding holding the home button.
carpenter940 said:
After battery change I had to hold HOME button for 5 seconds to re-pair my remote.
As for your other questions, I have no idea.
Click to expand...
Click to collapse
tried more than u you think still no answer i found the apk in the web
but still how u turn the BT on and off in the AFTV do you need to root the fire tv in order to know that
and thanks for the attached file
now am using my tab till i find a remote that would work for tha AFTV
Carthagenian12 said:
tried more than u you think still no answer i found the apk in the web
but still how u turn the BT on and off in the AFTV do you need to root the fire tv in order to know that
and thanks for the attached file
now am using my tab till i find a remote that would work for tha AFTV
Click to expand...
Click to collapse
Strange I had this problem and tried batteries contacts ( seemed ok but cleaned anyway) on off on then unpairing then it didn't appear at all.
Then tried to pair my stick remote which showed as unsuccessful tried main remote again and all fine again
I may be wrong but I was experiencing the same problem. but this was with a ftv2ndgen. supposedly, the remote now uses wifi now instead of bluetooth. I had a wireless device next to fire tv (rasperry pi, tablet, phone, wifi enable stereo equip, wifi tv etc) I moved them all away or disabled them then brought them back one at a time. it came back. I then put the ftvbox under the tv instead of behind. I now keep wifi stuff away from it that can be kept away, but not all things. just minimize wifi near it. and clear line of site between the remote and ftvbox. has not happened again. I remember changing my batteries in like three times and everytime a checked the old batteries they were fine.

FireTv cant connect to servers

Hi All,
Hopefully someone can help with restoring my fireTv, It has been working fine for the last year with kodi installed.
Two days ago screen just went blank and all i get is cant connect to servers, when I enter setting all the sub menus are not visible and it wont allow a factory restore via menu or from remote with holding back/right.
I connected via adb and loaded firestarter which allows me to see icons but again I cant load any firetv apps, I can however load netflix/kodi etc from firestarter.
Any thoughts or advise as how I can restore would be much appreciated.
Regards
Martin
This is a YouTube link to problem if someone can have a look please and shed some light. uyGIN3i3ZAw
Sounds like either something went wrong during an update, or for some reason your firetv has been blacklisted by amazon. Is it a ftv1 or 2? What os is it on? Is it rooted/custom recovery installed?
Sent from my HTC6535LVW using XDA-Developers mobile app
It's got latest firmware and has updated as norm but still the same. It's not rooted. Ftv1
Sent from my iPhone using Tapatalk
Out of curiosity OP, have you been able to resolve this issue? Note I've been battling the same thing for the past 3 days (all the while I haven't had a single issue in over a year from owning the device). Even after a factory reset I can't seem to connect...
Note: Should Amazon blacklist a device, is there a way of finding this out without directly asking Amazon?
I have the same problem as yours, but i already solved it in the morning. I moved my aftv stick to another tivi and tried to connect to different network that does not block anything ( i release firewall on router and connect to the guest network,) and then it easy connects to the amazon server. After that, I go back to my firewalled network, it works as the way it is...no problem so far!
Well guys I contacted Amazon and after a brief chat I was asked to watch screen, under 30 seconds later firetv up and running
Sent from my iPhone using Tapatalk
as for me, I had to de-register and re-register my FireTV device.

Kodi addons not working on fire stick, avoid initial fire stick update

I've been using xda forums for a while now but never registered, now inevitably I have a problem.
Yesterday was asked by a friend if i could put Kodi on a firestick, never done it before but I thought what the hell I'll give it a go, read around and all easy enough. Now I have Kodi installed I've put TVaddons on there and used that to get all the usual stuff, Exodus, Phoenix, SALTS etc they work fine i.e. install and load fine all menus are there but non of them can find any sources, exodus wont even bring up TV or movie lists. like i said I've never done this before but I have Kodi working fine on my computer so thought it wouldn't be any different. I've tried clearing caches and sources, uninstalled reinstalled, downloaded exodus zip file just incase tvaddons was the problem and nothing I'm at a loose end. Any ideas or help would be greatly appreciated.
Side note something I may be able to help with, i read recently (on here i think) that the fire stick will auto update on initial setup to the latest OS and to avoid this so you can root or for whatever reason, rather than plugging the stick into the provided power adaptor use one you have laying around or your computer, they don't provide enough power for the stick to be able to update. Hope that helps someone out there.
Are you sure you're connected to internet?
carpenter940 said:
Are you sure you're connected to internet?
Click to expand...
Click to collapse
yes I'm definitely connected to the internet haha.
just got a new fire stick and stopped the auto updates just in case it was that but still the addons don't seem to want to work my stick now running OS 5.0.5.1
everything installs fine, internet connections fine, addons go on fine they just dont work fine I'm at a loss
I installed Kodi for the first time the other day. Never used it before, still setting up. But I noticed the first few add ons I tried failed, like Exodus, All In One, DNA TV. None of them work. Figured it was me since I am new to Kodi. I figured it would be easy as installing and using them. Found TV guide. Tried 30 TV stations and none came on. I have a bunch to learn with Kodi. I have stock aftv1, lan connection. So its not just you.
I honestly don't know what was wrong with its but after what felt like a million uninstalls and re-installs i now have 2 working fire sticks with kodi running fine, don't think i will ever get to the bottom of the problem i was having the only thing i can suggest to anyone having similar issues is persistence, just keep reinstalling and eventually it seems to work, the only thing i can possibly think of is my internet connection has been playing up recently so maybe during the set up it disconnected and reconnected without me even noticing and messed up the setup other than that i have no idea.
Basically, Kodi isn't an organization which offers hardware at any level. It is an open source program or project, a group of volunteers who are committed to building a cool video player for various computers and mobile phones on such a large number of stages. It is basically planned to be utilized for video documents put away on your PC. It additionally empowers you to utilize additional items; these are straightforward contents which give you access to a wide range of content online. There are multiple solutions to fix this error.
Solution 1: Updating Graphics Card Drivers and installing DirectX.
Solution 2: Tweaking Kodi itself.
Solution 3: Installing Add-ons manually instead of Builds.
Solution 4: Clearing add-on cache. Solution 5: Using a VPN.
Here is the source link https://appuals.com/fix-kodi-not-working/ to follow and get the detail of each solution.

FireTV Stick Developer Options?

So friend gave me a FireTV Stick, brand new (Fire OS 5.2.6.3 (606754020), Fire TV Home Version 6.0.0.6-127).
Little desire to deal with Amazon, need to enable USB Debugging & ADB. Gotten as far as Fire App on Phone to bypass Registration to get to Settings-Device-Options, held Center/Down to Enable X-Ray, Developer Options Hidden Menu etc, but can not find any way to Access USB Debugging or ADB to enable them. When you enable Developer Options, only thing it does is give option clear Recorded Metrics whatever. Enabled it, rebooted, disabled it rebooted, re-enabled etc etc, only option I get is to clear recorded metrics.
Tried several diff ways, nothing can recognize it ADB as I can't enable it, tried USB to PC, it recognizes FireTV Stick, can see whats on the Drive or SD Card, but again, can't send files to it without USB Debugging. Rooted every Android Toy I own, not new to this, but has me stumped.
How do you enable USB Debugging or ADB to a FireTV Stick with latest OS without ever Registering it? As far as Normal stuff, it hooks to Network fine (behind Firewall & VPN), but won't Update, why if you go with the Fire App on phone, you can "pair" and get as far as Option to Access Hidden Developer Options etc, but no USB Debugging or ADB Enable Option is there.
Never messed with one, was more a sort of Gag Gift for a favor he owed me, so said why not, lets see what all the fuss over these things is, I wanna tinker with it.
You can always de-register the device from your Amazon dashboard after setting it up for the first time.
I remember reading in another post, someone describing the exact same situation.
Using the app to skip registration and discovering there was no option to enable adb debugging.
Sounds like they may have fixed that.
I noticed in 5.2.6.3 the same security feature Amazon has implemented to detour people from buying and selling blacklisted devices. I have spent more time than I would like to admit trying to find a loophole, but without the ability to enable abd and unknown sources it seems impossible. I hate to say this but Amazon has it locked down and if anyone could figure it out they would have to someone on xda but no one I know has jad a clue. I don't condone theft one bit, but love a challenge and this one has me stumped.
Well, part of the fun, lol. Voice in my head keeps saying the Fire App, has to be a way, but not seeing it as yet. Did read where someone built a special HDMI setup and over loaded the OS, prompting a a "bootloader" screen and got in that way somehow, but far beyond me and said the parts to build it were like $150, let alone knowing what to solder to what etc, beyond my capabilities.
matafact said:
Well, part of the fun, lol. Voice in my head keeps saying the Fire App, has to be a way, but not seeing it as yet. Did read where someone built a special HDMI setup and over loaded the OS, prompting a a "bootloader" screen and got in that way somehow, but far beyond me and said the parts to build it were like $150, let alone knowing what to solder to what etc, beyond my capabilities.
Click to expand...
Click to collapse
Honestly its fun and has also become consuming trying to find any way to get past each screen lol. I heard the same voice in the past and it worked lol. Now with these 5.2.6.3 2nd gen firesticks I have no way to get to Dev options and with the 4k firesticks it says my login is incorrect to Amazon, and as I previously mentioned I am pretty much out of ideas. Overload HDMI huh? Sounds interesting. Well back to the drawing board for now and If I learn anything I will let you know.
Well, Fire App in my head, dont know why, just keeps coming back to me. Not a programmer, not a Droid, Hacker type, but thinking this way, feel free to tell me Nope, won't work and this is why.
How does it pair with FTV Stick etc? Not Bluetooth etc, so how does it connect? Possible to take Fire App and tinker with code, add some/modify code or a script etc to modify it and get further into FTV OS 5?
Or thinking again, don't know, but seems with a Laptop on say WiFi Network, just like Droid, Iphone, with a Virtual Machine, know Virtual Box you can set up about any Android setup ya want.
So setup a Virtual Machine, tinker with Fire App in some way, and if Laptop can connect to FTV , well, just idea in my head that must be away to get around it, or at least with a Laptop would open many more options to try & beat it. Havent tried this yet, just keeps floating around in my head, may not even connect to a Virtual Machine, maybe over weekend I'll tinker with that a bit.
Somebody who programs etc would know far more on topic, but same idea keeps bouncing around in my mind. Could be dead wrong, maybe they have that locked down to, but guys here, well, how many "can't hack" toys have they already beat, lol.
matafact said:
Well, Fire App in my head, dont know why, just keeps coming back to me. Not a programmer, not a Droid, Hacker type, but thinking this way, feel free to tell me Nope, won't work and this is why.
How does it pair with FTV Stick etc? Not Bluetooth etc, so how does it connect? Possible to take Fire App and tinker with code, add some/modify code or a script etc to modify it and get further into FTV OS 5?
Or thinking again, don't know, but seems with a Laptop on say WiFi Network, just like Droid, Iphone, with a Virtual Machine, know Virtual Box you can set up about any Android setup ya want.
So setup a Virtual Machine, tinker with Fire App in some way, and if Laptop can connect to FTV , well, just idea in my head that must be away to get around it, or at least with a Laptop would open many more options to try & beat it. Havent tried this yet, just keeps floating around in my head, may not even connect to a Virtual Machine, maybe over weekend I'll tinker with that a bit.
Somebody who programs etc would know far more on topic, but same idea keeps bouncing around in my mind. Could be dead wrong, maybe they have that locked down to, but guys here, well, how many "can't hack" toys have they already beat, lol.[/QUOTE=matafact;78395384]
I wish I knew how to use tasker. Im a newbie but your ideas are great and have me thinking the remote app is the key, but it is a task I do not know how to execute.
Click to expand...
Click to collapse

Categories

Resources