[Q] Updating rooted AT&T Galaxy S III to stock 4.1.2? - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

So here's the scenario. I've gotten a replacement phone from AT&T and it came with 4.1.2 installed, but now it has 4.1.1 because of a botched Nandroid restore (incoming texts began to disappear, then the ENTIRE TEXT THREAD did. And never reappeared.). So I unrooted and hard wiped, unfortunately to 4.1.1.
Now I'm trying to figure this out: How can I root the replacement, perform a Nandroid restore (from old phone to replacement) so that everything is intact, and then upgrade the phone from 4.1.1 to 4.1.2 after it's been rooted? Obviously the OTA update won't work at that point, and despite searching this board and countless others for hours, I can't find anything that says how to do this in terms that I can understand, as all I've ever done is root stock. I downloaded loserskater's rooted stock 4.1.2 ROM but I certainly don't know what to do with it.

Related

[Q] OTA failed, will sprint re-push?

I previously rooted using auto-script method (EG30). I flashed a couple ROMs, lost some ****, had some issues, just couldn't get everything figured out like on my OG EVO. Anyways, I un-rooted using auto-script but didn't realize CWM was still installed so when I got the OTA update (EK02) today, it failed. If I re-root, and get the stock recovery back, then un-root, will the update be pushed again?
Or is my only option to flash a rooted version of EK02?
I just don't feel like messing with rooting and rom'ing at this point, just want to be stock and have the OTA pushed/installed via the stock recovery if possible.
I'm not sure if I should test the water but... Having had an Evo as well, everytime I had went back to a stock setup Sprint pused the updates, even so just do a check to the updates. Once Sprint/Google have pushed 100% progress out any phone after that should have no problem updating. Basically if you don't care to flash right now go back to stock out of the box and in any case your gonna get the update. That answer almost seemed to easy, hope it helps.
I suggest reading over FAQ #E12 in the auto root sticky:
e12) I told it to install the EK02 update, but something went wrong, now it won't prompt me again, how do I install EK02?

Unrooted At&t Note 2 didn't update

I just recently went back to stock because I was having data issues while my phone was rooted. The problem that I'm having right now is when I searched for a software update using the phone, it didn't find anything. I'm currently running 4.1.1 which I know prior to rooting my phone I was on the 4.1.2 version that includes multi-window-control (MWC).
Any suggestions?

[Q] First timer with restoring Rogers GS3 to factory but keep unlocked

Hey there!
So here's my situation: I recently got rid of a Rogers cellphone plan and decided to sell my GS3. Someone I know, immediately showed interest and decided to buy it from me. Good! At that moment, the device was locked to Rogers and was running stock Samsung GS3 (SGH-i747M) firmware.
That person decided to play with the phone, try to root it, flash Cyanogenmod or whatever it may be, and having failed several times, he decided to return the phone and get his money back. I shouldn't have accepted to reimburse him knowing how much he fiddled with it but I did.
Anyways too late now. The good thing is that I believe the phone is 100% functional (it boots, runs perfect and under system info shows everything as usual except under Status > Device Status, it shows modified.
I am not 100% sure of that what means but I believe it has something to do with a modified ROM or something like that.
That person supposedly unlocked the device because he was with another carrier.
Now I am putting the phone in the classifieds. Obviously I would like to have the phone back to 100% factory settings and ROM, no aftermarket stuff whatsoever BUT I'd like to keep it unlocked (if that's possible).
That way, it will be easier to resell.
So here's my questions:
What does "Device Status: Modified" really means?
How can I find out if the phone has been altered in any ways?
If it has been altered, is there a LINUX based procedure to restore EVERYTHING back to factory?
If I restore whatever has to be restored, will it re-lock the device?
As you can see, I am a total noob in that field. I would appreciate if someone can help me to prepare this device to be resold.
I don't want to cause any problems to anyone, that wouldn't be fair.
I appreciate. Thanks!!!
Okay a lot of questions, you can download the stock firmware from Samsung updates and if it is rooted you can get triangle away on the play store and reset the counter the using kies or the Samsung galaxy s3 toolkit from mskip's to flash the original firmware, your phone should be unlocked as none of the procedures should/could reloj the simple card
Sent from my SGH-I747M using Tapatalk 4
jimchee said:
Okay a lot of questions, you can download the stock firmware from Samsung updates and if it is rooted you can get triangle away on the play store and reset the counter the using kies or the Samsung galaxy s3 toolkit from mskip's to flash the original firmware, your phone should be unlocked as none of the procedures should/could reloj the simple card
Sent from my SGH-I747M using Tapatalk 4
Click to expand...
Click to collapse
Ok I have verified with an app called Root Checker Basic, and it said that the device wasn't rooted. I wonder if this is reliable.
I wiull check mskip's toolkit or Kies to restore the stock firmware.
What a pain..
Thanks jimchee for replying!!
Actually it's pretty easy but you can probably sell it just as easy if it's rooted and that way you can clear the counter, there is also a post in the Samsung sIII THREAD for AT&T that will walk you through restoring to stock, just make sure you download the file for your device the link is also in the att thread, if you have any trouble pm me and I can help, I am just a tinkerer but been doing it since my 1st original Motorola Droid
Sent from my SGH-I747M using Tapatalk 4
Probably the easiest approach would be to look for the Samsung S3 V7.0 toolkit post. This is a flash (programming) tool. It would easily root your phone if it needs that. Then you can use the app referred to earlier to reset the phone to an "unmodified" status.
Then finally go to the Samsung updates site as suggested and flash the phone with a stock Rogers firmware. I'd recommend a 4.1.1. version. Probably your phone will still be unlocked at this point. But if not, the stock v 4.1.1. Rogers firmware will allow you to unlock it again from an onscreen menu (search for "S3 unlock code *#197328640#"). And your phone will report an unmodified status at the end.
mrwhite0732 said:
Hey there!
So here's my situation: I recently got rid of a Rogers cellphone plan and decided to sell my GS3. Someone I know, immediately showed interest and decided to buy it from me. Good! At that moment, the device was locked to Rogers and was running stock Samsung GS3 (SGH-i747M) firmware.
That person decided to play with the phone, try to root it, flash Cyanogenmod or whatever it may be, and having failed several times, he decided to return the phone and get his money back. I shouldn't have accepted to reimburse him knowing how much he fiddled with it but I did.
Anyways too late now. The good thing is that I believe the phone is 100% functional (it boots, runs perfect and under system info shows everything as usual except under Status > Device Status, it shows modified.
I am not 100% sure of that what means but I believe it has something to do with a modified ROM or something like that.
That person supposedly unlocked the device because he was with another carrier.
Now I am putting the phone in the classifieds. Obviously I would like to have the phone back to 100% factory settings and ROM, no aftermarket stuff whatsoever BUT I'd like to keep it unlocked (if that's possible).
That way, it will be easier to resell.
So here's my questions:
What does "Device Status: Modified" really means?
How can I find out if the phone has been altered in any ways?
If it has been altered, is there a LINUX based procedure to restore EVERYTHING back to factory?
If I restore whatever has to be restored, will it re-lock the device?
As you can see, I am a total noob in that field. I would appreciate if someone can help me to prepare this device to be resold.
I don't want to cause any problems to anyone, that wouldn't be fair.
I appreciate. Thanks!!!
Click to expand...
Click to collapse
Give this a shot.........works well. I've used it a number of times on both my phones ( SH-I747M/SH-I747 )
[ROM/RESTORE][AT&T/ROGERS/TELUS/BELL]Return to UNROOTED STOCK WITH FLASH COUNT RESET
http://forum.xda-developers.com/showthread.php?t=2363882
Once the phone is unlocked it will stay that way whether you go back to stock or not.

Please help me, it's urgent. My Note 2 became a tablet..

Two days ago i bought Samsung Galaxy Note 2 N7100 (international). It had android 4.1.2 but i saw there is available update. After update to official android 4.3 my phone lost signal and started showing me "Not registered on network". 1 day passed since i am searching how to fix this thing. Tried custom rom (4.4.2) and still the same. I went back to official 4.3 for UK O2 , successfully rooted it, passed knox, installed busybox, installed ARIZA Patch. Still the same. Tried to flash MJ5 bootloader via ODIN but it shows me FAIL. And after every FAIL my phone is bricked so i am flashing all over again official ROM. I have NO backups of my EFS (in my search i saw that i need some EFS to repair this thing). I got no issue with WI-FI but only with network. If i revert back to stock android 4.1.2 will i be able to call somebody? If the answer is "YES", would somebody tell me how? I saw in some threads that with new 4.3 ROM note 2 got knox locked bootloader which is impossible to be downgraded. Please, give me guide step by step what to do to repair my phone by myself. Thank you in advance.
I would suggest you to take an efs backup on 4.1. Then flash 4.3 and if you aren't getting network try restoring your efs backup. That might solve your problem.

[Q] A little guidance for a galaxy newbie

Hello,
I just bought my first Galaxy device (had a CDMA LG for a while, and I have a Nexus Tablet), and I am looking at how to get this new phone set up right. I bought my i747 retail, so I was unable to unlock it. However, now I'm struggling with finding the right method for upgrading, rooting, etc. I know nothing about knox or any of these Samsung intricacies. Could someone please give me a little guidance on how to go about getting to the OS and status that I'm looking for? This is what I've done so far:
Came unrooted with 4.1.2 stock rom
Unlocked using legit unlock code
Tried OTA updates, but none were available (must be because of unlock)
Rooted w/ ODIN using 4.1.1 file based of MrRobinson method. (http://forum.xda-developers.com/showthread.php?t=1739426)
Now I keep getting popups like process. ... .acore,media, etc. stopped.
I'm looking to ideally get a custom recovery (either CWM or TWRP, whichever is better) and either kitkat Touchwiz or possibly kitkat nexus stock (I read somewhere that it was possible). Also, i just bought it, and have the code still, so I don't mind deleting everything if needed. Regardless, I'd like the ability to get it back to pure stock with no flash counter (I have a manufacturer's warranty I want to use if need be).
Could someone please just give me a little guidance? I'm pretty capable with rooting, etc., so you'd only need to lead me to other threads, etc. that will take me where I want to go. Thank you very much.
Before flashing or doing anything else, confirm the bootloader on your phone. Download and install the Samsung Phone Info app from the playstore and post your bootloader.
audit13 said:
Before flashing or doing anything else, confirm the bootloader on your phone. Download and install the Samsung Phone Info app from the playstore and post your bootloader.
Click to expand...
Click to collapse
Well, the bad news is I already flashed using MrRobinson's instructions, and now my phone is barely workable, as things like process.android.media and Touchwiz keep crashing. I was able to install the info app though, and my bootloader is listed as I747UCDLK3. Thanks again though, and let me know what else you need from me.
I recommend starting over by flashing the stock AT&T 4.1.1 firmware from sammobile. Once flashed, boot the phone and make sure your phone is sim unlocked. If it isn't sim unlocked, unlock it using the free method or your unlock code.
http://www.sammobile.com/firmwares/database/SGH-I747/
After sim unlocking, run OTA updates until you have the latest stock AT&T ROM on your phone. Upgrading the phone's bootloader and modem is the easiest way to do it for someone that is new to the phone and custom ROMs.
audit13 said:
I recommend starting over by flashing the stock AT&T 4.1.1 firmware from sammobile. Once flashed, boot the phone and make sure your phone is sim unlocked. If it isn't sim unlocked, unlock it using the free method or your unlock code.
http://www.sammobile.com/firmwares/database/SGH-I747/
After sim unlocking, run OTA updates until you have the latest stock AT&T ROM on your phone. Upgrading the phone's bootloader and modem is the easiest way to do it for someone that is new to the phone and custom ROMs.
Click to expand...
Click to collapse
Thank you, but wouldn't OTA updates install Knox, which would basically void my warranty if I tried to flash anything after that? And, I've checked for OTA updates twice, once on 4.1.2 and on 4.1.1, and both times it said my software was up to date.
I spoke with StoneyJSG about my situation, and he suggested that I go to stock 4.1, root w/ saferoot, then flash a kitkat custom rom without Knox through TWRP. That way, I could use triangle away and flash stock unrooted if I needed to send it in.
Although, I'm not sure if I should do that, as I thought I read that you need to update the radio and bootloader first before you can install a custom kitkat rom from jelly bean, but I'm still not entirely sure how that works.
The most recent release of many custom ROMs will not work but you may not have a signal without an updated modem and you should not be running updated modems on an older bootloader. Doing this could brick your phone.
With a rooted system, OTA updates will not work.
Thank you again for helping walk me through the minutia around this phone.
I think I have a much better understanding of everything now. I read the following article on Knox (http://omegadroid.co/wanted-knox-void-warranty-0x1/) and with an understanding of that, I get now that there is no way to load any custom rom on 4.3 or higher without losing my warranty.
So, basically my options are to stay at 4.1 and flash whatever, using triangle away to erase my tracks. Or, I could update to 4.3, but only be able to use saferoot/towelroot, otherwise I'd trip the warranty void. But, if all I did use was towelroot (no custom recovery or rom), then I could just unroot the phone using the full unroot option in SuperSU and send it on in for service if needed, right?
Also, I did unroot my phone and did a factory reset, so it's back at 4.1.1 and unrooted. Yet, I still do not see any software updates available from Samsung. I even plugged it into Kies, and nothing (http://i.imgur.com/E0xPGpf.png). Does anyone know why this could be? Does it have something to do with my not having a carrier for the phone yet? I'm sorry for all the questions, but I do appreciate your help.
jateed said:
Thank you again for helping walk me through the minutia around this phone.
I think I have a much better understanding of everything now. I read the following article on Knox (http://omegadroid.co/wanted-knox-void-warranty-0x1/) and with an understanding of that, I get now that there is no way to load any custom rom on 4.3 or higher without losing my warranty.
So, basically my options are to stay at 4.1 and flash whatever, using triangle away to erase my tracks. Or, I could update to 4.3, but only be able to use saferoot/towelroot, otherwise I'd trip the warranty void. But, if all I did use was towelroot (no custom recovery or rom), then I could just unroot the phone using the full unroot option in SuperSU and send it on in for service if needed, right?
Also, I did unroot my phone and did a factory reset, so it's back at 4.1.1 and unrooted. Yet, I still do not see any software updates available from Samsung. I even plugged it into Kies, and nothing (http://i.imgur.com/E0xPGpf.png). Does anyone know why this could be? Does it have something to do with my not having a carrier for the phone yet? I'm sorry for all the questions, but I do appreciate your help.
Click to expand...
Click to collapse
What is your cell service? If not AT&T, you will never get OTA.
Whether you get OTA can vary from carrier to carrier and phone to phone in my opinion.
I have a Rogers HTC One X that gets OTA updates from HTC even though I am on the Bell network.
I have a Bell S3 that is running on the Rogers network and it receives OTA updates from Bell even though it has a Rogers sim card in the phone.
I have a Telus Moto G running on the Bell network and it received the Telus KK OTA update while connected to the Bell network.
audit13 said:
Whether you get OTA can vary from carrier to carrier and phone to phone in my opinion.
I have a Rogers HTC One X that gets OTA updates from HTC even though I am on the Bell network.
I have a Bell S3 that is running on the Rogers network and it receives OTA updates from Bell even though it has a Rogers sim card in the phone.
I have a Telus Moto G running on the Bell network and it received the Telus KK OTA update while connected to the Bell network.
Click to expand...
Click to collapse
Well, I have an AT&T model which I unlocked and will be putting on Cricket at the end of the week (when my plan month is set to end). Right now there's no SIM in it, and I've been doing everything over wifi. I looked up whether the carrier had something to do with the OTAs, and I was told that Samsung sent the updates out, not AT&T, so I figured that the carrier info was irrelevant. I now wonder what my options are.
Can I manually flash 4.3 stock without tripping the knox warranty void?
Does Towelroot/Xposed framework trip the Knox void flag?
If I can update to 4.3/4.4 and root without tripping the knox flag, I might just manually update and just run towelroot and xposed to modify my OS the best I can until my warranty runs out.
If I can't root it at all once I'm on 4.3+, then I'll just sit on 4.1.1 for a few months until I can't stand it anymore and just void the warranty anyway.
Thanks again everyone. This whole knox/binary counter thing is not something I dealt with on my CDMA LG or Nexus, so I was totally in the dark about how it all worked. This is also my first GSM phone, so all those intricacies are new to me too. Once I know about manually flashing stock and running towelroot/xposed, I think I'll be in good shape.
Flashing the stock 4.3 ROM should not trip the counter as long as you do not need to install a custom recovery to flash it.
Apparently, the latest KK stock ROM cannot be rooted using Towelroot.
If you want a custom ROM, use one that will work with a 4.1.1 bootloader and modem. Once on 4.3 or higher, it's a little harder to recover from a soft brick.
audit13 said:
Flashing the stock 4.3 ROM should not trip the counter as long as you do not need to install a custom recovery to flash it.
Apparently, the latest KK stock ROM cannot be rooted using Towelroot.
If you want a custom ROM, use one that will work with a 4.1.1 bootloader and modem. Once on 4.3 or higher, it's a little harder to recover from a soft brick.
Click to expand...
Click to collapse
Excellent. If I did flash stock, i would just use ODIN, then factory reset to wipe the caches. And that's good to know about the KK rom, as I would probably update straight to 4.4 if at all (I've read a lot of bad things about 4.3 on the S3), but not if it means I cannot root safely and cleanly.
I'll check out the custom roms for 4.1.1. I know that flashing the rom and/or a custom recovery will trip the binary counter, but I can just use triangle away to clean that up. Do you know if there is a list of custom 4.1.1/4.1.2 roms somewhere, or do I need to scour the older threads here?
Thank you very much audit13 (thanks to StoneyJSG and pre4speed as well). You have been immensely helpful and really brought me up to speed on everything surrounding S3 customization. Needless to say it's way more complicated than what I've dealt with from LG and Google/Asus. (I mean, i could root my nexus with a single click using Wugfresh's toolkit)
4.1.1 is the only complete stock ROM that AT&T released for flashing via Odin.
4.3 ROMS and higher were prepared by XDA members for flashing in either a custom recovery or Odin.
audit13 said:
4.1.1 is the only complete stock ROM that AT&T released for flashing via Odin.
4.3 ROMS and higher were prepared by XDA members for flashing in either a custom recovery or Odin.
Click to expand...
Click to collapse
Oh, so what other way can you flash a stock rom, if not through ODIN or a custom recovery? Regardless, it seems as though I really should not dive into 4.3+ until I'm ready to concede that my warranty is over. There are just too many potential pitfalls and headaches.
On the lighter side, I've found a few 4.1.2 based custom roms that have some promise. I'm going to post them here in case anyone has opinions on them, or if someone else in my situation sees this thread and wants to go custom 4.1 too:
Hyperdrive RLS16
http://forum.xda-developers.com/showthread.php?t=2176793
Slim Bean-d2
http://forum.xda-developers.com/showthread.php?t=1865262
Jedi Academy
http://www.teamandroid.com/2013/12/...oid-412-jedi-academy-jelly-bean-custom-rom/2/
Jelly ‘Beans’
http://www.teamandroid.com/2013/04/...ndroid-412-att-galaxy-s3-sgh-i747-custom-rom/
I was also torn when I got my s3 that was running 4.1.2. I downgraded to 4.1.1, sim unlocked the phone, used it on stock 4.1.2 for about a week to make sure everything was working, hardware wise, upgraded to stock 4.4.2, installed a custom recovery and a custom ROM. I wasn't too concerned about the warranty since I got the phone as a free upgrade and had no intention of using the s3 as my daily phone. I kept it as a backup until my niece needed and phone and then it went to her. It's been over a year and there are still no problems with the phone.

Categories

Resources