Related
Go into Diagnosis(call ##634#) and enter *#0*# and press Compass near the bottom right of the screen.
There, you have a built-in compass app.
It seems this trick also works on NoDo, just that it's more jumpy whereas Mango is perfectly smooth.
If it doesn't work, you may need to re-calibrate your compass.
Refer to the video on how to do it:http://www.youtube.com/watch?v=sP3d00Hr14o
I know it's an iPhone in the video, but just follow the same figure 8 motion with the compass activated. It should work after you do it.
UPDATE: For those on Mango, it is highly recommended that you uninstall your Diagnosis app and re-install it to get the latest version, Diagnosis_DU ver0628
There are reports that this does not work on HTC Devices. As of now, I can only confirm that it works on Samsung Omnia 7
Sorry, but how do I get to "diagnosis" screen in order to enter the code?
Go to phone, and dial ##634#. After that, when you exit, the app will appear in the app list on your phone.
Mine doesn't show any reading under the "Deg" value nor does the actual compass image turn. Is that what's supposed to happen?
Only the X, Y and Z values change...
timolol said:
Mine doesn't show any reading under the "Deg" value nor does the actual compass image turn. Is that what's supposed to happen?
Only the X, Y and Z values change...
Click to expand...
Click to collapse
You can try rebooting your phone.
If it doesn't help, you may need to re-calibrate your compass.
Refer to the video on how to do it:http://www.youtube.com/watch?v=sP3d00Hr14o
I know it's an iPhone in the video, but just follow the same figure 8 motion with the compass activated. It should work after you do it.
acefiredx said:
You can try rebooting your phone.
If it doesn't help, you may need to re-calibrate your compass.
Refer to the video on how to do it:http://www.youtube.com/watch?v=sP3d00Hr14o
I know it's an iPhone in the video, but just follow the same figure 8 motion with the compass activated. It should work after you do it.
Click to expand...
Click to collapse
I followed your steps but my omnia's compass still stays uncalibrated. It works on compass 7 but not in diagnosis. Did i miss something
Doesn't work with HD7, does it? oO
joeltimothyoh said:
I followed your steps but my omnia's compass still stays uncalibrated. It works on compass 7 but not in diagnosis. Did i miss something
Click to expand...
Click to collapse
Uninstall the diagnosis app then reinstall it. Now, it should show Diagnosis_DU ( ver0628) at the top left. Then, try accessing the compass again.
dkp1977 said:
Doesn't work with HD7, does it? oO
Click to expand...
Click to collapse
Not sure. I'm using an omnia 7.
You might want to try and update the results here, so other users will know as well.
acefiredx said:
Not sure. I'm using an omnia 7.
You might want to try and update the results here, so other users will know as well.
Click to expand...
Click to collapse
I did that and it doesn't work. Could have been an issue with my device, so I thought I'd better ask.
It's not working on HTC device.
acefiredx said:
Uninstall the diagnosis app then reinstall it. Now, it should show Diagnosis_DU ( ver0628) at the top left. Then, try accessing the compass again.
Click to expand...
Click to collapse
Uninstalling then re-entering ##634# updated my diagnosis version and now compass works! Awesome tip and thanks
Worked for my Omnia 7 too! Thanks!
Dear all
After one month using my Xperia Acro S updated to JellyBean I realized that the proximity sensor is not working.
During a call the screen doesn't turn off avoiding touch on the screen, but before the update, with ICS, it was working very well.
What I tried to do, but without result:
1st recover JB by device
2nd recover JB by PC Companion
3rd flash JB by Flashtool
I tried to Google, but I didn't find a solution to fix this problem for Acro S...
I tried *#*#7378423#*#* and tested the sensor, and it always shows "off"
I tried lots of softwares that make changes to the sensor, and they don't work (recognize the sensor?)
After sometime I realized that the problem may be the JB and not the device, as the ICS was working, so I flashed to ICS again to confirm. As I expected the sensor was working properly: I typed *#*#7378423#*#* again and checked the sensor and it changes to "on" everytime I cover the sensor.
Somebody is experiencing the same problem? Could you fix it? How?
Thanks...
marceloyudi said:
Dear all
After one month using my Xperia Acro S updated to JellyBean I realized that the proximity sensor is not working.
During a call the screen doesn't turn off avoiding touch on the screen, but before the update, with ICS, it was working very well.
What I tried to do, but without result:
1st recover JB by device
2nd recover JB by PC Companion
3rd flash JB by Flashtool
I tried to Google, but I didn't find a solution to fix this problem for Acro S...
I tried *#*#7378423#*#* and tested the sensor, and it always shows "off"
I tried lots of softwares that make changes to the sensor, and they don't work (recognize the sensor?)
After sometime I realized that the problem may be the JB and not the device, as the ICS was working, so I flashed to ICS again to confirm. As I expected the sensor was working properly: I typed *#*#7378423#*#* again and checked the sensor and it changes to "on" everytime I cover the sensor.
Somebody is experiencing the same problem? Could you fix it? How?
Thanks...
Click to expand...
Click to collapse
Try to reFLASH again and do a total wipe clean from recovery, including dalvik's cache.
FTF file
zupadroid said:
Try to reFLASH again and do a total wipe clean from recovery, including dalvik's cache.
Click to expand...
Click to collapse
Hi Zupa... thanks for the suggestion!!
Do you have the original Xperia Acro S JB FTF file to send to me?
I want to try with the original one
Thanks
marceloyudi said:
Hi Zupa... thanks for the suggestion!!
Do you have the original Xperia Acro S JB FTF file to send to me?
I want to try with the original one
Thanks
Click to expand...
Click to collapse
Yes : http://forum.xda-developers.com/showthread.php?t=2302477
Still with problems
zupadroid said:
Yes : http://forum.xda-developers.com/showthread.php?t=2302477
Click to expand...
Click to collapse
Hi...
I proceeded as suggested and it still doesn't work. I flashed with the new Flashing tool 0.9.11.0 by Bin4ry and Androxyde and the sensor is not working.
I flashed to ICS again and it works very well, I don't understand...
What I noticed is that the sensor seems to work together with the light sensor, in the same position. Somebody knows if the sensor is the same? In the ICS the proximity sensor works when I cover the same part of light sensor (left from the speaker) and not in the right between the speaker and front camera.
Any other suggestions?
Thanks
Nobody knows?
Nobody has other suggestions?
marceloyudi said:
Nobody has other suggestions?
Click to expand...
Click to collapse
just flash back to ICS and check, if its the same, may be you have got your sensor damaged..
...
bluechip850 said:
just flash back to ICS and check, if its the same, may be you have got your sensor damaged..
Click to expand...
Click to collapse
Hi bluechip850
Thanks for the suggestion, but as I told I tried this and the sensor is working well in ICS.
By the way, I'm still using ICS due to the sensor is not working in JB.
I really would like to use JB, mainly because I noticed that the battery in ICS gets low faster that JB.
Any other suggestions?
Thanks
Wait for the new update.
skywalkerdroid said:
Wait for the new update.
Click to expand...
Click to collapse
can confirm it is JB 4.1 and 4.2 bug, xperia s lt26i offical Sony JB, xperia z1 offical Sony JB , proximity sensor off and stay off all the time, prestigio 4044 same, prestigion 5050 same, samsung s4 same. Don't have more phones to try, will test as I get any other in hads. So far only bug I found in JB but anoying one as it dont lock screen when call is on and phone on ear, so I press a lot of buttons during talk
.
Fanta_BH said:
can confirm it is JB 4.1 and 4.2 bug, xperia s lt26i offical Sony JB, xperia z1 offical Sony JB , proximity sensor off and stay off all the time, prestigio 4044 same, prestigion 5050 same, samsung s4 same. Don't have more phones to try, will test as I get any other in hads. So far only bug I found in JB but anoying one as it dont lock screen when call is on and phone on ear, so I press a lot of buttons during talk
Click to expand...
Click to collapse
Fanta_BH
My phone is a Xperia Acro S (LT26W) JB 4.1.2
I need to power the screen off manually every time I want to answer or make a call. I just fast press the button of the power just to turn off the screen and avoid to touch the screen accidentally.
When I finish the call I also need to fast press the button again so I can access the screen options again.
It is so boring, but I just found this solution until the next update. I didn't find any other solution or software to change or turn on the proximity sensor. I actually found some scripts, but I don't have experience to change the system and I don't want to kill my phone, so I decided to wait to the next update instead of downgrade to ICS again, which was working well, because of the improvements that JB provides.
If you find some information that can fix the proximity sensor, please tell me...
Fanta_BH said:
can confirm it is JB 4.1 and 4.2 bug, xperia s lt26i offical Sony JB, xperia z1 offical Sony JB , proximity sensor off and stay off all the time, prestigio 4044 same, prestigion 5050 same, samsung s4 same. Don't have more phones to try, will test as I get any other in hads. So far only bug I found in JB but anoying one as it dont lock screen when call is on and phone on ear, so I press a lot of buttons during talk
Click to expand...
Click to collapse
can add now, smart screen off when enabled, do job, proximitiy sensor starts working again. get it here from forum or from playstore on playstore it is taged as Smart Screen off lite.
---------- Post added at 10:52 PM ---------- Previous post was at 10:14 PM ----------
Fanta_BH said:
can add now, smart screen off when enabled, do job, proximitiy sensor starts working again. get it here from forum or from playstore on playstore it is taged as Smart Screen off lite.
Click to expand...
Click to collapse
well forgot to say, was searching on net and got that infor about software "smart screen off" it is made by someone from here on XDA. Decided to give it a try, installed it from playstore, it makes one icon on deesktop which function like simple button, when u press button proxim. sensor starts working and acting normaly, when u press it again it switch off so proxim sensor again not working as it is JB bug so JB keeps it off all the time when there is no other software which will enabled it directly, so go go try it I hope it will work for you as well.
Didn't work
Fanta_BH said:
can add now, smart screen off when enabled, do job, proximitiy sensor starts working again. get it here from forum or from playstore on playstore it is taged as Smart Screen off lite.
---------- Post added at 10:52 PM ---------- Previous post was at 10:14 PM ----------
well forgot to say, was searching on net and got that infor about software "smart screen off" it is made by someone from here on XDA. Decided to give it a try, installed it from playstore, it makes one icon on deesktop which function like simple button, when u press button proxim. sensor starts working and acting normaly, when u press it again it switch off so proxim sensor again not working as it is JB bug so JB keeps it off all the time when there is no other software which will enabled it directly, so go go try it I hope it will work for you as well.
Click to expand...
Click to collapse
Fanta_BH
I wouldn't like to say that just the software couldn't work.
The proximity sensor in actually disabled in my phone. I need to turn it on first to use any software to manage the proximity sensor. I thought that this software you told would enable the sensor, not just manage it.
Anyway thanks, if you have another suggestion I would be pleased to try
It seems like somewhere in the system a value to have the proximity sensor on during a call is set to off, find where its located and copy it over from ICS to jb and you should be good to go
Sent from my SGH-I747 using xda app-developers app
Instruction
thanitos said:
It seems like somewhere in the system a value to have the proximity sensor on during a call is set to off, find where its located and copy it over from ICS to jb and you should be good to go
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanitos
Nice idea, but can you explain or send a link how to access the system and make this changes?
Thanks
This is just an idea, if someone has a build.prop on the same phone and same version that has no issues with proximity post it here then OP flash to jb delete your build.prop and paste theres in your system folder. Else you could try copying your build.prop from ICS and pasting it in jb. Supposably that is where the issue lies on some phones. You may also want to flash a jb firmware that isn't stock, any ROM from the xperia s section should work. For editing the build.prop you need root and a root browser then go into system and at the bottom is build.prop. you may also want to read your build.prop and see if there are any lines for proximity in there
It seems as though you're not in touch with the android system, no offence, so I'd take the easy route and flash a jelly bean firmware from the across s section, this should work perfectly fine for you because its simply the stock ROM that's the issue and had a regression and most devs will fix this in their ROM.
How to root
http://forum.xda-developers.com/showthread.php?t=1834291
[Tut] Rooting the Acro S the easy way
Sent from my SGH-I747 using xda app-developers app
Maybe it works
thanitos said:
This is just an idea, if someone has a build.prop on the same phone and same version that has no issues with proximity post it here then OP flash to jb delete your build.prop and paste theres in your system folder. Else you could try copying your build.prop from ICS and pasting it in jb. Supposably that is where the issue lies on some phones. You may also want to flash a jb firmware that isn't stock, any ROM from the xperia s section should work. For editing the build.prop you need root and a root browser then go into system and at the bottom is build.prop. you may also want to read your build.prop and see if there are any lines for proximity in there
How to root
http://forum.xda-developers.com/showthread.php?t=1834291
[Tut] Rooting the Acro S the easy way
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I actually have my phone rooted, but the system folder just shows PIM folder
Should I do something more than just root?
----edit----
Sorry I didn't see, I should have root browser... installing to try
I'd just flash a jb ROM from the acro s section that's not stock
In my sony Ion I have two Proximity tweaks in the rom I use, try adding these and see if it helps at all,
ro.lge.proximity.delay=25
mot.proximity.delay=25
Sent from my SGH-I747 using xda app-developers app
marceloyudi said:
Fanta_BH
I wouldn't like to say that just the software couldn't work.
The proximity sensor in actually disabled in my phone. I need to turn it on first to use any software to manage the proximity sensor. I thought that this software you told would enable the sensor, not just manage it.
Anyway thanks, if you have another suggestion I would be pleased to try
Click to expand...
Click to collapse
Well at my lt26i it is same, prox sensor in settings is always off, so it is disabled and can not be enabled, but still software I said somehow when I press button for software enable it do enable prox. sensor and it working but its controled by software not by systme itself. And I dont getting it as with software enabled system still showing prox sensor as disabled.
Fanta_BH said:
Well at my lt26i it is same, prox sensor in settings is always off, so it is disabled and can not be enabled, but still software I said somehow when I press button for software enable it do enable prox. sensor and it working but its controled by software not by systme itself. And I dont getting it as with software enabled system still showing prox sensor as disabled.
Click to expand...
Click to collapse
Thanks for the explanation, but in my Acro S it didn't work very well. In my oppinion is more effective to press power button quickly to turn off the screen, because sometimes the software seems that is not running and it doesn't turn the screen off automatically....
thanitos said:
I'd just flash a jb ROM from the acro s section that's not stock
In my sony Ion I have two Proximity tweaks in the rom I use, try adding these and see if it helps at all,
ro.lge.proximity.delay=25
mot.proximity.delay=25
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanitos
Where I should type this lines? Can you give me extra instructions?
I have boot browser in my phone now
I have a problem with a camera rotation. Basically, when I open the camera to take a picture, the icon is either at the top or the bottom of the camera, then when I take a picture, it is always upside down. So, to get a picture that is not rotated 180 degrees, I have to turn my phone updside down.
Any idea how to fix this? I have flashed multiple roms and nothing seems to fix this. I do a wipe, infamous wipes, etc...
Can i totally rebuild the camera apk?
I have tried the "rotation fixer" on the t989 forum but no luck.
see screnshot. I took this picture in portrait mode.
have you tried to calibrate your proximity sensor?
How?
krazierokz said:
have you tried to calibrate your proximity sensor?
Click to expand...
Click to collapse
I am running jedi mind trick 8 and I don't have an option under display to calibrate anything. can you tell me how to do this? I can't find anything on the web as to how to do it.
Have you checked in the Jedi tricks settings or accessibility... can you do me a favor and download proximity test any one will work and this will rule out if it's the sensor don't worry we will figure it out
sent from my t mobile S4
krazierokz said:
Have you checked in the Jedi tricks settings or accessibility... can you do me a favor and download proximity test any one will work and this will rule out if it's the sensor don't worry we will figure it out
sent from my t mobile S4
Click to expand...
Click to collapse
nothing in jedi tricks settings or accessibility... i downloaded proximity sensor finder. It says proximity sensor available. Last distance reported 5.0 cm. If i put my hand over the sensor, it does detect that i am covering it up.
averagedawg said:
nothing in jedi tricks settings or accessibility... i downloaded proximity sensor finder. It says proximity sensor available. Last distance reported 5.0 cm. If i put my hand over the sensor, it does detect that i am covering it up.
Click to expand...
Click to collapse
Can you try to download camera ics and try taking a pic on there see what happens...?
Sent from my Nexus 7
krazierokz said:
Can you try to download camera ics and try taking a pic on there see what happens...?
Sent from my Nexus 7
Click to expand...
Click to collapse
i installed camera ics - same exact problem. I also tried the official google camera 4.3 apk ... no luck there eitehr.
What was your last working rom setup etc. with camera? Also what roms have you ran
sent from my t mobile S4
krazierokz said:
What was your last working rom setup etc. with camera? Also what roms have you ran
sent from my t mobile S4
Click to expand...
Click to collapse
i ahve been on jmt 6, 7 & 8. It started messing up about a month back and I can't find a fix. I tried the "rotation fixer" that some ahve used but it didn't work either...
I may have tried a cm10 at some point, but I am 90% sure i have only used jmt and it started messing up with jmt... it worked one day, then one day it started screwing up
Full wipe and reinstall sounds like you got corrupt files
sent from my t mobile S4
krazierokz said:
Full wipe and reinstall sounds like you got corrupt files
sent from my t mobile S4
Click to expand...
Click to collapse
every time I flash a rom, i do a full wipe from twrp. I also run infamous cache and super cache wipe.
Well if nothing is fixing your issue the only thing I can recommend now is to either go back to Odin and start from scratch.then flash 8 again if you dont feel the need for all that just try and deal with it brother you could also try flashing with cwm maybe that will help sorry I couldn't help you further man good luck to you please post if you find a solution you can help others later :beer:
sent from my t mobile S4
And not even 1 thanks.....k....I will!
Sent from my SGH-T989 using Tapatalk
thanks patrol
kj2112 said:
And not even 1 thanks.....k....I will!
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
KJ, mr thanks patrol... Thank you for point it out. I Didn't know the thanks meter was important there... Maybe I should spend alittle more time on the forum so I can get up on the proper thanking etiquette. But you made a "point"
my phone does not flash when I take a picture even with the flash enable or in auto.
Can you try using a Flashlight or similar app to check whether flash turns on as torch?
Donz7733 said:
Can you try using a Flashlight or similar app to check whether flash turns on as torch?
Click to expand...
Click to collapse
yes the flash turns on when I use it as a flashlight
jerver12 said:
yes the flash turns on when I use it as a flashlight
Click to expand...
Click to collapse
Cool. Then its not a hardware issue. You can try reinstalling the camera app (If u have not already tried it).
Donz7733 said:
Cool. Then its not a hardware issue. You can try reinstalling the camera app (If u have not already tried it).
Click to expand...
Click to collapse
I have already done it but nothing.
jerver12 said:
I have already done it but nothing.
Click to expand...
Click to collapse
Have you tried with other apps like Camera 360.
Ani64 said:
Have you tried with other apps like Camera 360.
Click to expand...
Click to collapse
yes I have already done it with (camera 360, proshot, 4blend HDR, camera explorer...) but nothing.
My phone is also Interopunlocked.
Which phone model is it?
nate0 said:
Which phone model is it?
Click to expand...
Click to collapse
Lumia 920 with W10M latest build 10.0.15254.249
How long ago did it stop working, was it after a update?
Just double checking. The flashlight works every time.... and if not you tried the hardware test right? This was a known issue on the 920's
nate0 said:
How long ago did it stop working, was it after a update?
Just double checking. The flashlight works every time.... and if not you tried the hardware test right?
Click to expand...
Click to collapse
the material does not have problem, it is at the level of the capture of the picture that it does not flash since in video mode it works perfectly.
jerver12 said:
the material does not have problem, it is at the level of the capture of the picture that it does not flash since in video mode it works perfectly.
Click to expand...
Click to collapse
Got it. Have you tried uninstalling that camera app Or loading the Nokia camera app back?
nate0 said:
Got it. Have you tried uninstalling that camera app Or loading the Nokia camera app back?
Click to expand...
Click to collapse
yes I have done uninstall it and then reinstall.
You are basically taking shots in the dark on this (no pun intended)
Maybe list out all the things you have done, what OS version, and update the issue started occuring....not sure who can offer help on this or what you are willing to do.
Go back to 8.1 if you cannot figure it out. Swap the back cover just to see...
I can think of only 3 scenarios:
-OS update caused
-App udpate caused
-Signs of Hardware degredation--meaning to turn torch on takes different voltage/amps then a burst (camera flash), or is triggered differently. Maybe something on the board is not working right in conjunction with the app. If you rollback to 8.0 you will know for sure on this.
it was after a update.
Hello,
I need a bit of help on this, my phone has really weird permissions issues. For example, when I want to configure an app for the first time that tells me to go enable notification access and it sends me to the screen where you can toggle notification access for a lot of apps and you activate the access for the app in question, the app doesn't see that you turned the permission on when it is on (double checked). I'll link a YT video I made that shows the issue perfectly. (please take note that this happens on EVERY app that asks for permissions this way)
The video might be blurry due to YT taking its time to process the video in its full HD glory.
https://youtu.be/lPkQYS7XURo
I tried resetting the phone and clearing the dalvik cache to no avail... And I don't know if its related, but both the Facebook app and the Messenger App crash really easily while doing the most mundane stuff (sending an image is often too much). They both have full permissions enabled. Weird, huh ?
If you know how to fix this, don't hesitate to post your method in this thread
Allmightyusfame said:
Hello,
I need a bit of help on this, my phone has really weird permissions issues. For example, when I want to configure an app for the first time that tells me to go enable notification access and it sends me to the screen where you can toggle notification access for a lot of apps and you activate the access for the app in question, the app doesn't see that you turned the permission on when it is on (double checked). I'll link a YT video I made that shows the issue perfectly. (please take note that this happens on EVERY app that asks for permissions this way)
The video might be blurry due to YT taking its time to process the video in its full HD glory.
I tried resetting the phone and clearing the dalvik cache to no avail... And I don't know if its related, but both the Facebook app and the Messenger App crash really easily while doing the most mundane stuff (sending an image is often too much). They both have full permissions enabled. Weird, huh ?
If you know how to fix this, don't hesitate to post your method in this thread
Click to expand...
Click to collapse
That video is in spanish. Some people like me will have no idea what the first screen requested
v.konvict said:
That video is in spanish. Some people like me will have no idea what the first screen requested
Click to expand...
Click to collapse
Hello,
Sorry, I just edited the YT link, now the vid is in english
Hello,
I don't know if it's allowed but I'm desperate soooo... Bump.
Okay i just saw the video. Can you disable notifications during the setup just so that you finish setting up the buds then try again enabling notification access from within the app after finishing setting it up
v.konvict said:
Okay i just saw the video. Can you disable notifications during the setup just so that you finish setting up the buds then try again enabling notification access from within the app after finishing setting it up
Click to expand...
Click to collapse
I tried, it keeps asking for notification permissions and won't go forward. And it does that for other apps that rely on notifications (NotifyEdge for example).
Allmightyusfame said:
I tried, it keeps asking for notification permissions and won't go forward. And it does that for other apps that rely on notifications (NotifyEdge for example).
Click to expand...
Click to collapse
Let me download it as well and see. What version os are you running?
Wierdly its working fine on mine. Am on beta 8 by the way.
I'm on 10.0.9.HD01BA
It's a french phone. I may try to join the beta ^^
Allmightyusfame said:
I'm on 10.0.9.HD01BA
It's a french phone. I may try to join the beta ^^
Click to expand...
Click to collapse
Maybe something wrong with the European firmware. That BA at the end indicates that. Try global firmware. Either stable or beta
Thanks for the advice man, I'll try with the beta and I'll get back to youas soon as possible to let you know and maybe make a psa about EU fw if it's that.
Alright, I'm downloading the beta rn and I'll update you on that ASAP.
Thanks for your time !
Well, no dice, even after the beta install... I'll try wiping everything tonight. I'll keep you updated !
Allmightyusfame said:
Well, no dice, even after the beta install... I'll try wiping everything tonight. I'll keep you updated !
Click to expand...
Click to collapse
Wait before you continue. Do other apps that require notification access give u a hard time besides the notifyedge and bud app that i could try as well to make sure its phone not the app that has a problem
v.konvict said:
Wait before you continue. Do other apps that require notification access give u a hard time besides the notifyedge and bud app that i could try as well to make sure its phone not the app that has a problem
Click to expand...
Click to collapse
I tried to use NotifyBuddy and it has the same issue
Allmightyusfame said:
I tried to use NotifyBuddy and it has the same issue
Click to expand...
Click to collapse
Wierd coz that also definately works on mine. Must be a firmware issue
v.konvict said:
Wierd coz that also definately works on mine. Must be a firmware issue
Click to expand...
Click to collapse
Is there a good stock Android cfw for this device ?
Allmightyusfame said:
Is there a good stock Android cfw for this device ?
Click to expand...
Click to collapse
I am on beta 8 and i have no complaints