After wiping out data and cache in CMW recovery, my phone automatically shuts down. now it wont turn on even by pressing the power button + vol+ or vol- . I Tried flashing stock firmware using the latest flashtool but it says * device connected with USB debugging off * . i left the phone plugged in to charge but only red light appears for hours and it still wont turn. Red light turns off every now and then . Please help i dont know what to do please help . What do i need to do get my phone working again ?
xxlongstarxx said:
After wiping out data and cache in CMW recovery, my phone automatically shuts down. now it wont turn on even by pressing the power button + vol+ or vol- . I Tried flashing stock firmware using the latest flashtool but it says * device connected with USB debugging off * . i left the phone plugged in to charge but only red light appears for hours and it still wont turn. Red light turns off every now and then . Please help i dont know what to do please help . What do i need to do get my phone working again ?
Click to expand...
Click to collapse
Try doing this.. Hold Volume Up and Power button until u get 3 vibrations after the 1st vibration.. Then put it to charge.. And if u r seeing a charging animation, let it charge fully.. And then try rebooting.. If it doesn't turn on, just flash stock ftf.. Hold volume down and connect the cable.. Don't let go of the volume down button until flashing starts..
sudhindrakv said:
Try doing this.. Hold Volume Up and Power button until u get 3 vibrations after the 1st vibration.. Then put it to charge.. And if u r seeing a charging animation, let it charge fully.. And then try rebooting.. If it doesn't turn on, just flash stock ftf.. Hold volume down and connect the cable.. Don't let go of the volume down button until flashing starts..
Click to expand...
Click to collapse
I held down volumn up and power button for at least 2 minutes there's no response , no vibrations whatsoever. i tried flashing stock ftf .But every time i connect my phone, flashtool displays * device connected with usb debugging off * despite holding down the volumn button for at least 3 minutes please help .
On a side note ive charged this phone for at least 20 hours now and it still only shows red LED no other colour
xxlongstarxx said:
I held down volumn up and power button for at least 2 minutes there's no response , no vibrations whatsoever. i tried flashing stock ftf .But every time i connect my phone, flashtool displays * device connected with usb debugging off * despite holding down the volumn button for at least 3 minutes please help .
On a side note ive charged this phone for at least 20 hours now and it still only shows red LED no other colour
Click to expand...
Click to collapse
Then i think u have some H/W problem.. May be something to do with Motherboard.. Get it serviced with Sony Service Center.. Tell them some joke excuse...
xxlongstarxx said:
I held down volumn up and power button for at least 2 minutes there's no response , no vibrations whatsoever. i tried flashing stock ftf .But every time i connect my phone, flashtool displays * device connected with usb debugging off * despite holding down the volumn button for at least 3 minutes please help .
On a side note ive charged this phone for at least 20 hours now and it still only shows red LED no other colour
Click to expand...
Click to collapse
Can you connect it in fastboot mode?
Dark Wraith said:
Can you connect it in fastboot mode?
Click to expand...
Click to collapse
No i could not . When i connect my phone to my computer with red LED nothing pops up on flashtool, when the red LED disappeared i tried connecting it in flashmode holding down the vol down buttom as guided by another thread. got no response and same goes with fastboot mode, no luck either ):
Related
Hello
I had my S not bootunlocked, but rooted for CWM.
I was charging in CWM backup, and after I came back the phone got bricked. The only thing I can see is the red led.
I tried - power button (+ volume up) : Nothing happens. No vibration. - flashtool : it says the device is disconnected.
I can see only the red led when I connect my phone to wall charger and computer. But nothing happens - no SONY logo.
What can I do? Please help....
It became alright after charging.
ahin_failed said:
Hello
I had my S not bootunlocked, but rooted for CWM.
I was charging in CWM backup, and after I came back the phone got bricked. The only thing I can see is the red led.
I tried - power button (+ volume up) : Nothing happens. No vibration. - flashtool : it says the device is disconnected.
I can see only the red led when I connect my phone to wall charger and computer. But nothing happens - no SONY logo.
What can I do? Please help....
Click to expand...
Click to collapse
Press Power & Volume Up buttons for 15 seconds approx. until you feel 3 vibrations.
alinuredini said:
Press Power & Volume Up buttons for 15 seconds approx. until you feel 3 vibrations.
Click to expand...
Click to collapse
I tried it several times. It didn't work though I pressed more than 30 seconds.
ahin_failed said:
I tried it several times. It didn't work though I pressed more than 30 seconds.
Click to expand...
Click to collapse
I think that charging doesn't work while in CWM, so you probably had a battery drain. Leave the phone on wall charger(with original USB cable) for 20 minutes or more, and check the phone again. After you have charged it for 20 or more minutes, connect it in fastboot mode and flash CWM again, so you can flash a rom.
guys unfortunately i just flashed xperia Z kernel using fasboot in my beloved xperia zl..now it is not booting up,only red light glowing...i think it is dead please help..
vivekrules said:
guys unfortunately i just flashed xperia Z kernel using fasboot in my beloved xperia zl..now it is not booting up,only red light glowing...i think it is dead please help..
Click to expand...
Click to collapse
Calm dowm man, i already did that **** once kkkkkk
Simple: Hold down the reset buton till your cellphone vibrate 3 times (That hide one beside your SD Card). That'll turn it off. So hold down your Volume ( - ) button and plug your USB, now you are in flash mode.
Open Flash Tools and flash a Stock ROM (Recommended) or Stock Kernel, That's it!
viniciusnc said:
Calm dowm man, i already did that **** once kkkkkk
Simple: Hold down the reset buton till your cellphone vibrate 3 times (That hide one beside your SD Card). That'll turn it off. So hold down your Volume ( - ) button and plug your USB, now you are in flash mode.
Open Flash Tools and flash a Stock ROM (Recommended) or Stock Kernel, That's it!
Click to expand...
Click to collapse
thanks for your reply buddy..but nothing is happening when i press that yellow reset button beside my sd card
vivekrules said:
thanks for your reply buddy..but nothing is happening when i press that yellow reset button beside my sd card
Click to expand...
Click to collapse
You need to hold it down till it vibrate three times.
No fear, only hold it down
viniciusnc said:
You need to hold it down till it vibrate three times.
No fear, only hold it down
Click to expand...
Click to collapse
Thanks a ton buddy..u saved my A**:good:
vivekrules said:
Thanks a ton buddy..u saved my A**:good:
Click to expand...
Click to collapse
Sorry for bumping this thread, but I got exactly the same problem described by OP. But I simply can't get into the flashmode.
When I hold the volume (-) button and plug the cable at the phone, I got nothing more than the Windows USB sound and a red led of death on my ZL (C6503).
What I've already did:
1) Pressed the "Off" button beside the SD card slot a lot of times (holding it for a few seconds of course) before trying to get into the flashmode;
2) Tried SUS, PC Companion and Flashtool but couldn't get the flashmode or detected by any of them;
3) Keep it charging for more than 12 hours and all I got is this red led of Death!
Any help is welcome.
Cheers.
Edit:
Got the flashmode holding at the following way.
1) Pressed the "off" button beside the SD card slot for a few seconds and instead the 3 vibrations the red led blinked 3 times;
2) Hold the volume (-) button, connected the USB cable and keep holding for a lot of seconds, you will hear the Windows USB sound disconnecting and connecting a few times, wait until Flashtool recognize it and start flashing.
Hi,
asus zenfone 2 not charging or turning on. just the symbol as attached pic.
when connected to charger it get vibrates and turn on with charge symbol and after few mins goes off. and this repeats. Please someone help on this. Appreciate your help.
if u can acces the bootloader menu (press the power button until the phone turn off then press volume up + power when it vibrate release the power button only) u can install the stock rom using this guide "http://forum.xda-developers.com/zenfone2/general/wwze551ml2-20-40-19420160713-raw-t3437416"
if can´t acces to bootloader u have to do this "http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256"
lineu94 said:
if u can acces the bootloader menu (press the power button until the phone turn off then press volume up + power when it vibrate release the power button only) u can install the stock rom using this guide "http://forum.xda-developers.com/zenfone2/general/wwze551ml2-20-40-19420160713-raw-t3437416"
if can´t acces to bootloader u have to do this "http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256"
Click to expand...
Click to collapse
Hi lineu, Thank you so much. I'm trying the 2nd method which you advised as dont have access to bootloader itself.
during this step, when using xFSTK Downloader 1.7.0, in download status i can see
"Details: BATI:42415449: Batter voltage: 0x45(1294.760000V) The threshold: 0xbf(3.585000V)" and progress bar shows only 8% for a longer time. am i missing something.
My phone is in dead state, i cannot even see charging icon in the screen. Appreciate your help on this. Please help. Attaching the screenshot for your reference.
I think that error is because the battery go to 0%, any chance to extract it and charge manually? With that process u recover the bootloader and later u can use the Asus flash ttools
Or try again the procedure (u can see if the windows device manager recognize the morefield driver when u connect the phone)
how to charge battery manually? as when i connect to the charger it is not getting charge.
suracesh said:
how to charge battery manually? as when i connect to the charger it is not getting charge.
Click to expand...
Click to collapse
just leave it on charge for few hours
Hello all
So my friend has an Xperia xa1 plus, she tried to install another room but she gut stuck in the middle of the process and had to disconnect the cable, now the phone is totally dead, it charges when connected to a charger and shows the red led, other than that it does nothing, we tried every reset method we found in the net, and none have worked.
So do you guys know any thing that we can do?
Thanks in advance!
Samwill3000 said:
Hello all
So my friend has an Xperia xa1 plus, she tried to install another room but she gut stuck in the middle of the process and had to disconnect the cable, now the phone is totally dead, it charges when connected to a charger and shows the red led, other than that it does nothing, we tried every reset method we found in the net, and none have worked.
So do you guys know any thing that we can do?
Thanks in advance!
Click to expand...
Click to collapse
Looking from the outside, it seems that I have been through something similar.
What I can advise is to carry out the process in this way:
1 - Shut the device down by pressing and holding Power and Vol + simultaneously. Wait a few seconds and it will vibrate once, more one second and it will vibrate 3 more times. Until it vibrates 3 times, hold Power and Vol + pressed. Only release it after the vibrations. So it will have shut down totally.
2 - After that, plug in the charger and make sure the device has at least 40% battery.
3 - If you have or when you have it, disconnect it, make sure it is completely off (otherwise repeat the first step), wait for about 20 seconds and make the flash process normally in Flashtool, preferably without interruption.
Let me know if it worked. Hope so.:fingers-crossed:
boyrock said:
Looking from the outside, it seems that I have been through something similar.
What I can advise is to carry out the process in this way:
1 - Shut the device down by pressing and holding Power and Vol + simultaneously. Wait a few seconds and it will vibrate once, more one second and it will vibrate 3 more times. Until it vibrates 3 times, hold Power and Vol + pressed. Only release it after the vibrations. So it will have shut down totally.
2 - After that, plug in the charger and make sure the device has at least 40% battery.
3 - If you have or when you have it, disconnect it, make sure it is completely off (otherwise repeat the first step), wait for about 20 seconds and make the flash process normally in Flashtool, preferably without interruption.
Let me know if it worked. Hope so.:fingers-crossed:
Click to expand...
Click to collapse
Sorry for the late reply, it worked!
Thank you very much, i appreciate your help :highfive:
Help!
boyrock said:
Looking from the outside, it seems that I have been through something similar.
What I can advise is to carry out the process in this way:
1 - Shut the device down by pressing and holding Power and Vol + simultaneously. Wait a few seconds and it will vibrate once, more one second and it will vibrate 3 more times. Until it vibrates 3 times, hold Power and Vol + pressed. Only release it after the vibrations. So it will have shut down totally.
2 - After that, plug in the charger and make sure the device has at least 40% battery.
3 - If you have or when you have it, disconnect it, make sure it is completely off (otherwise repeat the first step), wait for about 20 seconds and make the flash process normally in Flashtool, preferably without interruption.
Let me know if it worked. Hope so.:fingers-crossed:
Click to expand...
Click to collapse
I remove battery, but cannot boot into flash mode to flash rom, the led always red. and flashtool show no device. help me, i'm very upset!
Flshtool dont have support for plus and ultra version . Add my unofficial patch to flashtool and re download via xperi firm firmware and try to connect your Xperia . My patch add support for plus and ultra version. If you have problem write to me pm
Chceck my guide . I wrote guide about problem with flash
MAREK10747 said:
Chceck my guide . I wrote guide about problem with flash
Click to expand...
Click to collapse
Please help my phone is dead after flashing rom Android 8
Not work flash mode and fast boot please guide me to live phone and take file for live phone my phone is connect cable usb just red light is on not vibrate and not anything
Take off battery !! Download Emma and without battery press vol- connect cable to other USB than normal Emma detect your Xperia or if dont detect dont stop pressing vol- and connect battery . Emma flash your Xperia . If this dont work download boot IMG and flash via fastboot and retry flash (look up how)
---------- Post added at 12:26 PM ---------- Previous post was at 12:24 PM ----------
If this methods dont work find the test point and try use test point
What’s test point?
Test point?
MAREK10747 said:
Flshtool dont have support for plus and ultra version . Add my unofficial patch to flashtool and re download via xperi firm firmware and try to connect your Xperia . My patch add support for plus and ultra version. If you have problem write to me pm
Click to expand...
Click to collapse
I meet this problem also, recently I tried to flash a stock firmware on my Sony xa1 Ultra G3212, and after a minute my phone shutdown and cannot power on. same red light is showing and when trying to connect on flashmode (Log: USB Debug is off and MTP 2011 blablabla are showing). if you fixed yours please kindly guide me how you do it.
disconnect battery , make flashtool ready to flash , press vol- , connect usb , connect battery and wait for green led . Don't stop push vol- wait for green led
Xa1 dead phone
I have the same problem, gives "unknown device" when connected to laptop in device manager, unable to flas
---------- Post added at 07:00 AM ---------- Previous post was at 06:54 AM ----------
Please help me
I'm hard working, trying to recover my zenphone2,
When I connect to usb, the charge screen work as usual, but when i try to turn on, crash on asus screen.
When i try to recover it using xFSTK, plugging into pc and pressing volume down, my device is not recognized on "Intel Soc" category this is the only thing that bother me.
I don't know how to proceed, i recovered many times my phone from brick, but this time i can't because did not recognize the USB on windows.
Anyone can help, give me a tip to recognize the usb?
Thanks
After hours trying..
I started do randomly press volume down , up and power.. and i gone to boot select menu !
rvitor said:
After hours trying..
I started do randomly press volume down , up and power.. and i gone to boot select menu !
Click to expand...
Click to collapse
Volume up during boot
Sent from my ASUS_Z00AD [MM .352] [Unlocked MaGisK]