Develop Bugs

Black Bumper for S3 (HQ pics) Recommend!!

Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks

Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!

You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too

Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2

i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.

I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.

Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap

How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.

I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.

ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.

is it easy to take it in and out of your pant pocket

denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.

Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity

PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:

Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.

Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.

rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:

dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.

HHI Clear flexible TPU case for $.99

So, I went on a limb and ordered this:
http://www.handhelditems.com/matte-back-clear-flexible-case-p-201349.html
I would say I hope I don't regret it, but it was $.99 + about $3 for shipping. It hasn't shipped yet, but they provided a tracking number last night.
It's clear, has a cutout for the power button it appears, and I hope it works well. Just worried about it stretching out like the silicone on my current phone did. I'm not that familiar with TPU, so hoping that's not an issue.
Edit: I just got this case. It shipped in about 5 days by ups. It very thin but also makes me unsure if it'll absorb any impact at all. The first thing I noticed I think back is frosted, not completely clear. It's also not curved, but flat all around. I'm curious how well this will fit. The frosted back has a subtle texture to I as well, make it comfortable to hold and not slippery. The power button and all ports are exposed, only the volume buttons are covered and they feel stiff.

gk1984 said:
Just worried about it stretching out like the silicone on my current phone did. I'm not that familiar with TPU, so hoping that's not an issue.
Click to expand...
Click to collapse
The TPU case on my Galaxy S Captivate is still fine after almost 3 years. No stretching whatsoever. I don't take it on/off often though, so that may shorten the life. It is certainly not like the silicone I have seen on other cases (specifically a GS3 Defender case that a friend has) which is very loose and has already been replaced once or even twice.

Dazrin said:
The TPU case on my Galaxy S Captivate is still fine after almost 3 years. No stretching whatsoever. I don't take it on/off often though, so that may shorten the life. It is certainly not like the silicone I have seen on other cases (specifically a GS3 Defender case that a friend has) which is very loose and has already been replaced once or even twice.
Click to expand...
Click to collapse
This is encouraging. Could be a dollar well spent.

It's definitely not a bad purchase for $1. The only thing you need to be aware of with TPU cases like that is they retain heat, which can be really crappy if you're doing some hardcore gaming or have the phone sitting on your dash. As far as protection goes, my requirement is that the case has a lip that comes out a bit from the face of the phone. That way if I drop it face down my screen (hopefully) won't get scratched.

Does anyone know if AT&T stores have any HTC One cases / screen protectors yet.
OP - thanks for the case link. I picked one up also.

Now they gave me $1 store credit. I bought this case and only paid shipping if I decide to spend my 1 on something else.
Sent from my Evo 3D CDMA using xda app-developers app

gk1984 said:
Now they gave me $1 store credit. I bought this case and only paid shipping if I decide to spend my 1 on something else.
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Damn...you could have bought mine...LOL.

iFalcon said:
Damn...you could have bought mine...LOL.
Click to expand...
Click to collapse
Well... I'm not saying yes, but I looked at the rest of their accessories and don't want/need anything else...

gk1984 said:
Well... I'm not saying yes, but I looked at the rest of their accessories and don't want/need anything else...
Click to expand...
Click to collapse
Agree completely...nothing else interests me.

This case came today, but I won't have time for a day or more to show it off or describe it.
But I did want to let everyone know I isn't completely clear. The back I will frosted clear. This is misleading from their page. We'll see how I looks when I get the phone.
Sent from my Evo 3D CDMA using xda app-developers app

I haven't been using this case much because I preferred my Speck clear case - well, the rubber/silicone trim around the volume buttons and usb port are streatching badly... so I put this $1 tpu case on instead finally. Dropped my phone on the asphalt last night from just below my shoulders. Phone landed on a corner and did a few flips. No damage what-so-ever. Not even a dent on a corner. Also have a Rhino Shield MK II on too, so if there would have been any screen damage, the shield did it's job well too.

HTC One Diztronic TPU Case Review

Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:

nice thanks !

Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.

HotInEER said:
Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.
Click to expand...
Click to collapse
Yeah the Poetic cases look great. I'll be picking some up soon and reviewing those as well.

Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.

pokey9000 said:
Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.
Click to expand...
Click to collapse
Yeah, I got my first one back when I had my Galaxy Nexus LTE. After being happily surprised I got both the hard shell and TPU for my Nexus 4 and will be using this one on my future HTC One. Hopefully sales are good enough for the TPU that they release a hard shell case.

That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4

Gja88 said:
That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4
Click to expand...
Click to collapse
I doubt it will grey over time. I've never had it happen to me on any case.

I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.

dxwilliams40 said:
I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.
Click to expand...
Click to collapse
Yeah I'm scared to make the switch to HTC and sense since I've had stock since the gnex lte but I've never owned an HTC device and I always thought sense looked nice. I've heard so many bad things about it that it has me worried, but I guess I've gotten bored of pure stock for a bit and its time to try something new. Either way I can't wait to try it out. Hopefully its worth it!
Sent from my Nexus 4

I got my Diztronic Gray TPU case today, and since I've been using the HHI (purchased from that $0.99 sale last week) I figured I'd share the differences having them both in hand.
As I said above, I had a Diztronic TPU on a previous phone and enjoyed it although it had a few flaws (excess molding flash around buttons, missing NC mic hole). Being a tightass I jumped on the cheap HHI case deal, figuring I'd take a chance on other manufacturers matching that same quality.
And I was rewarded for my cheapness with a cheap case. The HHI case has two big problems as far as I'm concerned. The cutout for the power button is pill shaped, following the contour of the button and projecting upwards away from the case. It doesn't leave much room for a finger to press, especially when trying to use your index finger when one-handing it. I remedied this with an X-Acto and a soldering iron to smooth the cut, opening up the button hole towards the back of the case. More troubling though is the fit around the front of the case. HHI managed to get the back of the case to fit the curves of the One nicely. However they didn't account for the bevel around the One's bezel. The side effect of this is that the corners don't stretch the front portion enough, leaving the sides to bow out a couple of mm at the center of each side. I don't think this would affect the function of the case in an impact, but at best it ruins the straight line aesthetic of this phone. One lesser annoyance is the molding seam that runs the entire perimeter, which isn't distracting to the touch but is very obvious against the transparent side pieces.
The HHI seems like it would be a functional case from the aspect of being protective: it covers the corners with shock absorbing TPU and protects the bezel where it counts. It goes in and out of pockets easily and the matte clear blends well with the color of the silver phone.
Today the Diztronic came in and the extra $11.51 proved well worth it. The Diztronic case fixes both of the issues I had with the HHI: the power button cutout is nearly flush with the button at the front and back, making it easy to push, and the front fits snug and stays straight along the edges. Like the HHI, the cutouts all line up ok, and while it doesn't make a functional difference the camera cutout is centered maybe 1mm too low. Unlike the HHI, the molding seams are small and in the corners. My previous TPU case experience was with a black case, so time will tell if I'll see this one turn yellow after a few months. If that happens (and supposedly it's inevitable with clear TPU) I'll buy the black version without hesitation.
TL;DR: The HHI and Diztronic TPU cases both do their jobs, but the Diztronic is well worth the extra money for the fit and finish.

Nxxx said:
Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:
Click to expand...
Click to collapse
SH*T. lol i just spent awhile putting a video together for these cases. hahaha
http://www.youtube.com/watch?v=czwrO4AWlQ0&feature=youtu.be

I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.

fightr said:
I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.
Click to expand...
Click to collapse
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium

beforedenied said:
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Haha 'tis is true but I remember I got my HTC One S case for approximately $7 or so but
nevertheless I am quite content with this case! I just recieved it today, so far so good. I was a little concerned that it would cover the camera a little as the cutout looks really tight and possibly even touches the lens but it actually doesn't affect the pictures which is fine for me!
Otherwise I'm liking it! I feel like it is definitely a little more protected than it would be naked but slim enough to not make much of a difference although I do miss the aluminum unibody feel a little..
Just to add, definitely not going to protect much from a crazy fall or anything but I already knew that when I decided to purchase it.

Purchased this case after seeing everyone's reviews here. Thanks everyone!

Warning to anyone using the Ringke Slim case...

I'm sure people have probably mentioned this already but I just wanted to show you guys what the sharp edges on the case can do to your phone after removing the case. Very disappointed with Rearth, never had this issue with the N4 slim case and it was much easier to remove as well.

That looks awful! ;(
Sent from my Nexus 5 using xda app-developers app

Yup, that case scratched the corner of my N5 as well (not as bad as yours though). I have requested a refund on Amazon and shipping it back to them.

Spigen ultra fit does more scratches ure lucky
Sent from **Nexus 5 signal sucks**

Raistlin1 said:
Yup, that case scratched the corner of my N5 as well (not as bad as yours though). I have requested a refund on Amazon and shipping it back to them.
Click to expand...
Click to collapse
You should be able to request a refund without having to ship the case back. Just tell them that this case is unusable/defective, which it is honestly. I also left a review on Amazon with the picture to warn people as well.
What made this even more painful though is I waited 3 weeks for this case to arrive (I'm in Canada so not sure if it was a customs thing) and I did just fine without any protection

Gah! I have this case... I guess i'll try never to take it off... Can you recommend some alternative cases if I ever do have to hide a scar like that?

A soft tpu
Sent from **Nexus 5 signal sucks**

Wow, this sucks. I have N5 Ringke Slim case (haven't put it on a phone yet) but the edges doesn't seem to be that sharp.

The key is to bend the case while taking it off and on.
I've done over a dozen times without issue.
Sent from my Nexus 5 using Tapatalk

av3n said:
I'm sure people have probably mentioned this already but I just wanted to show you guys what the sharp edges on the case can do to your phone after removing the case. Very disappointed with Rearth, never had this issue with the N4 slim case and it was much easier to remove as well.
Click to expand...
Click to collapse
Wow! A case did that?
Hey, I've got the same pajamas.

samizad said:
Wow! A case did that?
Hey, I've got the same pajamas.
Click to expand...
Click to collapse
lmao.

All rigid cases can cause this. Gaps in between the phone and the case cause abrasion and will wear off the urethane soft touch finish. Go for a TPU or silicon case or cover your phone with a skin to prevent this.

The case will also pull your back plate off as well. I stopped using it after that. I am lucky I don't have any scratches.

samizad said:
Hey, I've got the same pajamas.
Click to expand...
Click to collapse
Nice. They're damn comfy

Kinda glad that my case and screen protector never arrived, been over a month now, refund demanded!

is it only on the edges? if so ill just place a small piece of tape on my phone on the edges to protect it

I've had the rearth slim since it launched and have zero scratches on my phone. Not saying that this case won't scratch but I've taken it off and put it on several times without issue. It fits so snug and feels almost identical to the back of the N5 I love it. Adds quite a bit of additional grip as well
Sent from my Nexus 7 using XDA Premium 4 mobile app

I had that case on my galaxy Nexus and when I finally took it off to sell the phone it had scratched the **** out of the back/bottom of the phone.
Never buying one again...
Sent from my Nexus 5 using Tapatalk

Get the Diztronic, have it for my N5 and had it for my N4, never a single problem and I dropped my N4 a few times even face down and it never had any damage with the Diztronic on it.

This is my greatest fear from hard cases. I only buy rubberized or tpu cases encased in a hard case.

Spigen slim armor nexus 5

Any tip on how to remove spigen slim armor from nexus 5?
Sent from my Nexus 5 using xda app-developers app

I usually keep the two pieces together, just take it off starting from one of the sides.

PsychDrummer said:
I usually keep the two pieces together, just take it off starting from one of the sides.
Click to expand...
Click to collapse
Is that how you put it on too, keep the pieces together? I should be getting mine today.

t1.8matt said:
Is that how you put it on too, keep the pieces together? I should be getting mine today.
Click to expand...
Click to collapse
Yeah, it's easier that way.

PsychDrummer said:
Yeah, it's easier that way.
Click to expand...
Click to collapse
Thanks man, can't wait to give it a go. I'm actually excited to get this case. Fedex can't get here fast enough.

t1.8matt said:
Thanks man, can't wait to give it a go. I'm actually excited to get this case. Fedex can't get here fast enough.
Click to expand...
Click to collapse
No problem. The only issue I've been having with it is that it tends to collect dust on the phone. Along the edges and inside the cutouts. Let me know if you experience the same issue.

PsychDrummer said:
No problem. The only issue I've been having with it is that it tends to collect dust on the phone. Along the edges and inside the cutouts. Let me know if you experience the same issue.
Click to expand...
Click to collapse
I kinda like keeping my phone clean so I wouldn't let dust collect anyways but we'll see what happens. For some reason I don't think it's getting delivered today even though it says it's in transit.

I bought several cases so far and always end up going back to Slim Armor. It adds a bit of bulk but the protection is great. I actually dropped my phone 3 times from about pocket height on ceramic tiles and tarmac and once when my 9mo son smashed it on the marble table. Took the phone out and not a single damage on it. I admire the stealthy look of the black one plus the cut out are very precise. Only downside is the bottom part where the micro USB port sits has a slight gap that do tend to collect dust but I can live with that
Sent from my Nexus 5 using XDA Premium 4 mobile app

My Slim Armor case has been in my city for 5 day's and they won't let me pick it up. Damn FedEx. I ordered a case from Trident after I ordered the Spigen and I'm already getting that one today. Irritating. How long has it taken people ordering this case from Amazon to receive theirs?

bushako said:
I bought several cases so far and always end up going back to Slim Armor. It adds a bit of bulk but the protection is great. I actually dropped my phone 3 times from about pocket height on ceramic tiles and tarmac and once when my 9mo son smashed it on the marble table. Took the phone out and not a single damage on it. I admire the stealthy look of the black one plus the cut out are very precise. Only downside is the bottom part where the micro USB port sits has a slight gap that do tend to collect dust but I can live with that
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, I use the case but I haven't really dropped it yet (luckily). Was wondering if the protection was really good on it. Of course drops vary and anyone can get unlucky but it's still nice to hear.
t1.8matt said:
My Slim Armor case has been in my city for 5 day's and they won't let me pick it up. Damn FedEx. I ordered a case from Trident after I ordered the Spigen and I'm already getting that one today. Irritating. How long has it taken people ordering this case from Amazon to receive theirs?
Click to expand...
Click to collapse
I was actually in a rush to get mine because I didn't want to walk around too long without a case so I paid for two day shipping. It is prime eligible though. Most items that are prime eligible even if you don't have prime and choose the 3-5 day shipping it gets there fairly quickly. At least in my experience.

PsychDrummer said:
Thanks, I use the case but I haven't really dropped it yet (luckily). Was wondering if the protection was really good on it. Of course drops vary and anyone can get unlucky but it's still nice to hear.
I was actually in a rush to get mine because I didn't want to walk around too long without a case so I paid for two day shipping. It is prime eligible though. Most items that are prime eligible even if you don't have prime and choose the 3-5 day shipping it gets there fairly quickly. At least in my experience.
Click to expand...
Click to collapse
I'm just anxious cause it really looks one a great case and it's ridiculous to have a package sit a couple miles from your house for 5 days. It was sent FedEx smart post, which goes from shipper, to FedEx, then to my post office. Doesn't sound too smart to me.

I laugh at the online reviews of this case, where the reviewer separates the two halves and then struggles to put the case on the phone.
It is a two piece case, but it is made to be used like a one piece case.
Sent from my Nexus 5 using Tapatalk

t1.8matt said:
I'm just anxious cause it really looks one a great case and it's ridiculous to have a package sit a couple miles from your house for 5 days. It was sent FedEx smart post, which goes from shipper, to FedEx, then to my post office. Doesn't sound too smart to me.
Click to expand...
Click to collapse
This really is a fantastic case! Only complaint I would throw out there is coming from the diztronic tpu case this thing is slippery as hell compared to the phone or the diztronic but I love the looks and seems like this case would for sure withstand a good fall.
Sent from my Nexus 5 using Tapatalk

twister99403 said:
This really is a fantastic case! Only complaint I would throw out there is coming from the diztronic tpu case this thing is slippery as hell compared to the phone or the diztronic but I love the looks and seems like this case would for sure withstand a good fall.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Sounds good. I should hopefully have it tomorrow as I seen my post office FINALLY has it. Keep my fingers crossed, especially since I'm disappointed in another case I got today.

Is there a certain way you put the phone in the case? I know you keep the two parts together but how do you start the phone in the case and get it the rest of the way in?

Volume buttons first. Doesn't really matter.
Sent from my Nexus 5 using Tapatalk

I can say I'm very pleased with the Slim Armor. Install was simple. Very good looking case, got the black one. Very clean looking. I will say that the power button is a tad harder to push, but nothing to give a negative review about, definitely no where near as hard to push as the Zerolemon battery case for my Galaxy Nexus. All in all, very much worth the money and the wait I had to get it.

It's too big. Sent back
Inviato dal mio Nexus 5 utilizzando Tapatalk

t1.8matt said:
I can say I'm very pleased with the Slim Armor. Install was simple. Very good looking case, got the black one. Very clean looking. I will say that the power button is a tad harder to push, but nothing to give a negative review about, definitely no where near as hard to push as the Zerolemon battery case for my Galaxy Nexus. All in all, very much worth the money and the wait I had to get it.
Click to expand...
Click to collapse
I cut both buttons from the rest of the case on one side, so now they press a lot easier.

Lownita said:
I cut both buttons from the rest of the case on one side, so now they press a lot easier.
Click to expand...
Click to collapse
What do you mean you cut them? You cut the rubber button covers completely off so the buttons are exposed?