[Q] Trying to get HBOOT drivers installed on Windows 7 - Desire Q&A, Help & Troubleshooting

Hi
My Win7 disk crashed some time back and I'm trying to get it back to the way it was which, I believe, had hboot and fastboot drivers for my (now rooted) HTC Desire on it. I can't remember everything about how I did it before but now, when I put the phone into HBOOT then connect it to the PC, it installs as "HTC Serial Interface" and I don't seem to get it to become an "Android Bootloader Interface".
Can anyone suggest anything to help?
As I mentioned, I _think_ I had the hboot drivers installed before, but it's always possible I didn't so if I don't need them any more anyway as the phone's already rooted, please let me know.
What I remember from before was using fastboot to install a custom recovery so perhaps that's the case.
Thanks
John

jgmccabe said:
Hi
My Win7 disk crashed some time back and I'm trying to get it back to the way it was which, I believe, had hboot and fastboot drivers for my (now rooted) HTC Desire on it. I can't remember everything about how I did it before but now, when I put the phone into HBOOT then connect it to the PC, it installs as "HTC Serial Interface" and I don't seem to get it to become an "Android Bootloader Interface".
Can anyone suggest anything to help?
As I mentioned, I _think_ I had the hboot drivers installed before, but it's always possible I didn't so if I don't need them any more anyway as the phone's already rooted, please let me know.
What I remember from before was using fastboot to install a custom recovery so perhaps that's the case.
Thanks
John
Click to expand...
Click to collapse
Install these.
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
What are you trying to do?

abaaaabbbb63 said:
Install these.
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
What are you trying to do?
Click to expand...
Click to collapse
Those are the instructions I was following but those drivers wouldn't install by the "right click on the .inf file and select 'Install'" method so had to be done by attaching the phone. When I attached the phone Windows went off and installed the "HTC Serial Interface" drivers!
However - I had a bright idea; uninstalled the "HTC Serial Interface" driver from device manager, switched off my wireless (because the "skip checking windows update" option when drivers installing doesn't seem to work very well!) and connected the phone again. This time it said it couldn't install the drivers so I went to device manager and followed the instructions again and now have an Android Bootloader Interface.
Overall what I'm trying to do is just play with different ROMs. I'd s-offed etc and loaded teppick74's (or something like that) Gingerbread ROM some time back to give the phone to my daughter but she had some problems with it and now uses an iPhone so I've got it back. I had to use the AmonRA recovery (I think) for that ROM because it used the older format that EXT4 Touch Recovery didn't support so I'm just trying to get back to the state where I can use that and play about more.
Thanks for taking the time to answer
John

Related

Unrevoked 3.21 need Help

Could someone please help.
I am trying to root using the Unrevoked Beta 3.21 to root my phone. I get to the end in Unrevoked and it states "failed to flash recovery image"
This is what I have done:
1. Installed all drivers - Device manager does stat ADB Interface just like the guide states.
2. Installed the Relfash packgage
3. Phone is in "debbuging mode"
4. Charge Only is selected
5. Using Windows xp
One strange thing that I do notice is that when the Unrevoked program tells you to select the Hboot usb on my phone and when I do so it flashes blue or green wording that says "no Image" when it looks like its trying to load an image. Afterwards the phone goes into the reboot phase and then states "Failed to flash recovery image". Help is much appreciated.
drivers
i'd mak esure you have everything else uninstalled, every doubletwist, htc software and drivers get it all off, then reboot install unrevoked drivers, then 3.21
thats what i did last night, and it worked.
dguidry12 said:
Could someone please help.
I am trying to root using the Unrevoked Beta 3.21 to root my phone. I get to the end in Unrevoked and it states "failed to flash recovery image"
This is what I have done:
1. Installed all drivers - Device manager does stat ADB Interface just like the guide states.
2. Installed the Relfash packgage
3. Phone is in "debbuging mode"
4. Charge Only is selected
5. Using Windows xp
One strange thing that I do notice is that when the Unrevoked program tells you to select the Hboot usb on my phone and when I do so it flashes blue or green wording that says "no Image" when it looks like its trying to load an image. Afterwards the phone goes into the reboot phase and then states "Failed to flash recovery image". Help is much appreciated.
Click to expand...
Click to collapse
Uninstall HTC Sync if you have it installed.
Hey folks thanks for the help you all gave. I finally got it to work last night. What I did was unistalled everything that I had downloaded and started fresh from the beginning of the directions. It was all good after and worked flawless. Now im moving on to see what "root" actually is and how it benefits me.
Thanks,
dguidry12 said:
Could someone please help.
I am trying to root using the Unrevoked Beta 3.21 to root my phone. I get to the end in Unrevoked and it states "failed to flash recovery image"
This is what I have done:
1. Installed all drivers - Device manager does stat ADB Interface just like the guide states.
2. Installed the Relfash packgage
3. Phone is in "debbuging mode"
4. Charge Only is selected
5. Using Windows xp
One strange thing that I do notice is that when the Unrevoked program tells you to select the Hboot usb on my phone and when I do so it flashes blue or green wording that says "no Image" when it looks like its trying to load an image. Afterwards the phone goes into the reboot phase and then states "Failed to flash recovery image". Help is much appreciated.
Click to expand...
Click to collapse
I have a similar problem, I down loaded from IRC and few others on other thread tried them all and I get the same results. in the flash it says killing adb bug then waiting for device debug usb and stays that way. what am I doing wrong I deleted everything HTC, drivers ect. I used usb tethering on pdanet to get everything do I delete that as well? is there a more precise guide in detail from start to finish for noob as there is one for the 1.26.561.6 version.
thanks
hi guys
i just upgraded to 2.2
i also followed everything. but whenever i start 3.21 , it will not detect my htc desire. im using windows 7.
i never installed sync programs etc. evrytime i plugged in my phone to 3.21, i can see the yellow ! ADB. is it normal? and can u guys help unrevoked my phone. thank you guys.
evo help please
I'm currently trying to root my Evo for the first time and as afar as the software goes i downloaded everything that i needed to when i comes time to go to the device manager i cant find the Android 1.0 in other devices i followed the guide to the letter but it still wont show up does anyone know why??????? and what do i need to do to get it to show....(android usb devices shows up when it's plugged in from usb and when i click the drop down it just says my HTC if that helps any i'm also using windows xp...)

[Q] How to recover RECOVERY?

Hi guys!
Today I tried to get the rooted desire with Android 2.2 with unrevoked 3.21
Previosly I updated to 2.29.405.2 SW
When I run the unrevoked it (desire) freezed on "waiting for root" step. Desire freezed in boot progress (white screen with HTC logo on it)
I removed battery and inserted it again. But I cant boot it, desire freezes on the same white screen with HTC logo.
I can HBOOT, but when I go to recovery menu my device goes to reboot and freez.
So it seems that unrevoked spoiled my recovery and I do not know hot to fix it.
Please guide me, the working solution will be donated $20
--------------
Radio version: 5.11.05.27.
SPL/hboot version: 0.93.0001.
product: bravo.
mid: pb9920000.
security: on.
build-mode: ship.
Device model is not SAPPHIRE - flash old/new disabled.
This device does not have s-off nor eng hboot.
-------------
Thanks!
Flash a stock RUU and try again, you can get 2.29.405.2 from my signature. Remember to use a gold card if you had to in the past
How can I flash the RUU without access to recovery?
You should flash it via fastboot.
Hold the back button and turn on your phone to enter FASTBOOT, then connect your phone to the pc with the usb cable and then run the ruu.
3722 said:
You should flash it via fastboot.
Hold the back button and turn on your phone to enter FASTBOOT, then connect your phone to the pc with the usb cable and then run the ruu.
Click to expand...
Click to collapse
Did it as you said, result is the same
After the successful flash procedure thru RUU device went to reboot and freezed at the same white screen state.
Recovery is still unavailable to get into.
Now I will try to get the logged data thru Android SDK.
This thing is really mess me up =( I'm phoneless.
You, guys, are the one and only hope.
I have installed SDK, but I cant see anything in adb logcat but "waiting for device", thogh my device is conneted via fastboot usb.
Any clue?
I had that same issue, and it turns out it was a problem with the earlier version of clockworkmod (2.5.0.1) that had that issue, where freezing occurred at the HTC splash screen.
Try unrevoked again, with the 2.5.0.7 image here:
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.7-bravo.img
Make sure you select the image when you start unrevoked.
It might fail a few times (freezing at splash), but if it does, just pull the battery and keep trying....eventually it'll manage to go through.
Good luck =)
Latty said:
I had that same issue, and it turns out it was a problem with the earlier version of clockworkmod (2.5.0.1) that had that issue, where freezing occurred at the HTC splash screen.
Try unrevoked again, with the 2.5.0.7 image here:
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.7-bravo.img
Make sure you select the image when you start unrevoked.
It might fail a few times (freezing at splash), but if it does, just pull the battery and keep trying....eventually it'll manage to go through.
Good luck =)
Click to expand...
Click to collapse
Latty, how can I run unrevoked with a desired image if I cant boot the phone to get it recognized by unrevoked?
you have to start the flasher without the phone being connected, then you should be able to select the image (top left of window).
waebi said:
you have to start the flasher without the phone being connected, then you should be able to select the image (top left of window).
Click to expand...
Click to collapse
yes found it, but when I connect my phone via Hboot usb or fastboot usb - unrevoked does not recognize the connected device.
hellt said:
yes found it, but when I connect my phone via Hboot usb or fastboot usb - unrevoked does not recognize the connected device.
Click to expand...
Click to collapse
Follow the unrevoked guide to install the drivers. Also uninstall HTC drivers before that.
droidzone said:
Follow the unrevoked guide to install the drivers. Also uninstall HTC drivers before that.
Click to expand...
Click to collapse
Already done it. Installed drivers from unrevoked package. But still my phone doesnt get recognized by unrevoked.
hellt said:
Already done it. Installed drivers from unrevoked package. But still my phone doesnt get recognized by unrevoked.
Click to expand...
Click to collapse
It still is a driver issue.
Start from scratch..
Remove all HTC Drivers
Reboot
DC from internet
Connect phone in two modes-Android, Fastboot
It should get recognized but drivers shouldnt be installed and you should be prompted for driver location. If you arent prompted, get Device Manager, uninstall the driver which recognized the device.
Now install Unrevoked drivers as per guide.
Phone should be recognized..
droidzone said:
It still is a driver issue.
Start from scratch..
Remove all HTC Drivers
Reboot
DC from internet
Connect phone in two modes-Android, Fastboot
It should get recognized but drivers shouldnt be installed and you should be prompted for driver location. If you arent prompted, get Device Manager, uninstall the driver which recognized the device.
Now install Unrevoked drivers as per guide.
Phone should be recognized..
Click to expand...
Click to collapse
Ok, thanks will do it now.
But one more question, should it be recognized from hboot usb mode with "Android Bootloader interface" driver, or from fastboot mode?
Cant confirm that without my phone..
But, I believe drivers would recognize it in both..And seperate drivers too..
A small tip..If you have dual boot, try Unrevoked in another OS in which you havent installed HTC. Should work
droidzone said:
Cant confirm that without my phone..
But, I believe drivers would recognize it in both..And seperate drivers too..
A small tip..If you have dual boot, try Unrevoked in another OS in which you havent installed HTC. Should work
Click to expand...
Click to collapse
Faced with problems
1) I uninstalled HTC Drivers.
2) plugged phone and deleted Bootloader interface device then Boot Interface device.
3) rebooted
4) disconnected from internet
5) plugged and powered device and got Bootloader Interface driver installed without a single promt!!! And Boot interface as well.
So I had no chance to manually set the path to the drivers. And unrevoked still doesnt see the device =(
It turns out that I should try another OS???
PS and the key point, should it be recognized in hboot mode or unrevoked only works with booted to OS devices only?
Not really..But that's the easy way out..
Difficult to show you what exactly to delete..
Mostly these are driver clashes..When you uninstall the driver you should tick the option to delete the driver from system.
Try again and you know you've succeeded when it doesnt find any driver installed, and asks you for the location, when you can choose the unrevoked drivers..
Hm, I cant find any options prompting to delete driver from the system... But I will look into more carefully.
ADDED
Found it, trying now.
Tried, was promted to specify the path to the drivers, installed again and with no luck =( Unrevoked doesnt see the device.
I will try it tomorrow on another PC and with another OS.
Thanks for help, I really appreciate this, and I hope we will find a solution.
PS. Is this problem called USB brick?

[Q] USB connection error

Hi, today a have tried to root my htc desire using revoked 2 method. I was unable to install usb drivers. And now i cant even mount desire as hard drive. Computer still reports that device is unknown. I tried different usb ports, 2 different cabels, windows xp and seven. Before everything worked fine. Do you thing it is possible, that i damaged phone, when i plug it out just disconnecting cable?
Which version of unrEVOked did you try? I seems like a driver issue as you have to install the modified Hboot drivers for unrEVOked in a certain way before unrEVOked will work. If you attempted root with unrEVOked 3.21, did you follow the steps mentioned in thi thread?:
http://forum.xda-developers.com/showthread.php?t=776696
and
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
MasDroid said:
Which version of unrEVOked did you try? I seems like a driver issue as you have to install the modified Hboot drivers for unrEVOked in a certain way before unrEVOked will work. If you attempted root with unrEVOked 3.21, did you follow the steps mentioned in thi thread?:
http://forum.xda-developers.com/showthread.php?t=776696
and
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Click to expand...
Click to collapse
I used this tutorial http://forum.xda-developers.com/showthread.php?t=788044
and I stuck at 3. point... On your phone, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses.
and after that i am unable to connect desire to pc... no way...seems like something happend with usb driver in phone or i dont know...just i ve tried 3 computers for now and every reports same when I connect usb, that device is unknown
What Hboot do you have?
What is your PVT version? (also check the Bootloader for this info)
0.93.0001 and I forgot...I stucked at third point because i got there no option HBOOT USB
benefic said:
0.93.0001 and I forgot...I stucked at third point because i got there no option HBOOT USB
Click to expand...
Click to collapse
And your PVT version?
Bravo pvt1 ship s-on
hboot-0.93.0001
benefic said:
Bravo pvt1 ship s-on
hboot-0.93.0001
Click to expand...
Click to collapse
Ok, thank you for that info.
To tell you the truth, with unrEVOked 3.21, you must install the modified HBOOT drivers for it to work, otherwise it will not work at all.
Please try following this guide as it is definately requied. I asked you above if you had tried going through it, you mentioned that you had only tried using the guide in the first link, but you definately need to have the modified HBOOT drivers installed to proceed.
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Try what is suggested and let me know if you can proceed past step three after configuring the HBOOT drivers first, as it is a must.
MasDroid said:
Ok, thank you for that info.
To tell you the truth, with unrEVOked 3.21, you must install the modified HBOOT drivers for it to work, otherwise it will not work at all.
Please try following this guide as it is definately requied. I asked you above if you had tried going through it, you mentioned that you had only tried using the guide in the first link, but you definately need to have the modified HBOOT drivers installed to proceed.
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Try what is suggested and let me know if you can proceed past step three after configuring the HBOOT drivers first, as it is a must.
Click to expand...
Click to collapse
Well I tried connecting usb cable in bootloader menu but no HBOOT USB PLUG appeared and in device manager i dont have Android 1.0 device. and this is the problem.
benefic said:
Well I tried connecting usb cable in bootloader menu but no HBOOT USB PLUG appeared and in device manager i dont have Android 1.0 device. and this is the problem.
Click to expand...
Click to collapse
Hmm... yes i see what you mean. Unrevoked is fussy regarding drivers. Try the following:
1) Uninstall HTC Sync completely, the HTC Driver Setup, and HTC BMP Driver if present.
2) Reboot and reinstall the HTC Sync software (latest version).
3) Now uninstall HTC Sync Alone. Keep other two (HTC Driver Setup and HTC BMP Driver) installed.
4) Reboot your PC again.
Note: do not connect phone to PC at all and make sure the phone is switched off.
5) Switch your phone to the Bootloader screen. Connect the phone via USB and it should show Fastboot USB.
6) Windows will show the device detection dialog box - at this point, stop Windows from getting the driver from Windows Update, and manually choose the location of the driver as the folder where Unrevoked driver is present.
7) After this is done, diconnect phone again.
8) Go through the unrEVOked guide and connect the phone when advised to.
If this fails, then try unrEVOked 3.22 (in my sig below) and see how that goes and although you have mentioned that you have tried 3 different PC's, you may have to consider trying it on a different OS platform, such as Linux.
MasDroid said:
Hmm... yes i see what you mean. Unrevoked is fussy regarding drivers. Try the following:
1) Uninstall HTC Sync completely, the HTC Driver Setup, and HTC BMP Driver if present.
2) Reboot and reinstall the HTC Sync software (latest version).
3) Now uninstall HTC Sync Alone. Keep other two (HTC Driver Setup and HTC BMP Driver) installed.
4) Reboot your PC again.
Note: do not connect phone to PC at all and make sure the phone is switched off.
5) Switch your phone to the Bootloader screen. Connect the phone via USB and it should show Fastboot USB.
6) Windows will show the device detection dialog box - at this point, stop Windows from getting the driver from Windows Update, and manually choose the location of the driver as the folder where Unrevoked driver is present.
7) After this is done, diconnect phone again.
8) Go through the unrEVOked guide and connect the phone when advised to.
If this fails, then try unrEVOked 3.22 (in my sig below) and see how that goes and although you have mentioned that you have tried 3 different PC's, you may have to consider trying it on a different OS platform, such as Linux.
Click to expand...
Click to collapse
ok, i tried what you suggest, but desire refused any other driver...and keep installing unknown usb device driver
benefic said:
ok, i tried what you suggest, but desire refused any other driver...and keep installing unknown usb device driver
Click to expand...
Click to collapse
Try downloading the Android SDK: installer_r08-windows.exe
Follow the steps in this video to hopefully get the appropriate USB drivers - http://www.youtube.com/watch?v=N66J6UiN5Pg&feature=player_embedded
EDIT:
With the phone connected, try the following afterwards:
Check to make sure that you have USB Debugging enabled on your phone.
In Device Manager, right-click your Unknown Android device and select 'Update Driver Software'. Browse to the folder (extract the zip to the Desktop) i have attached below and see if it installs them.
MasDroid said:
Try downloading the Android SDK: installer_r08-windows.exe
Follow the steps in this video to hopefully get the appropriate USB drivers - http://www.youtube.com/watch?v=N66J6UiN5Pg&feature=player_embedded
Try the following afterwards:
In Device Manager, right-click your Unknown Android device and select 'Update Driver Software' (Make sure you are connected to the Internet to search for available drivers via Windows Update).
Click to expand...
Click to collapse
OK, i will try the thing with sdk..i am downloading files right now, but that makes no sense to download any other windows drivers. I think the problem is inside of the phone, because it represents itself like unknown device to any computer with any drivers...if there is a way to restore flash memory or something...well looks like i will have to wait one month for reclamation...how this could happen my god
benefic said:
OK, i will try the thing with sdk..i am downloading files right now, but that makes no sense to download any other windows drivers. I think the problem is inside of the phone, because it represents itself like unknown device to any computer with any drivers...if there is a way to restore flash memory or something...well looks like i will have to wait one month for reclamation...how this could happen my god
Click to expand...
Click to collapse
I agree... it is clearly an HBOOT driver issue or the phone... Windows (PC host) drivers are seperate. I was just running out of ideas really
The only definate way of knowing if it is the device that is causing this issue is if you were to try it on a non-Windows related OS, like Linux and maybe it would work for you using an Ubuntu Live CD.
MasDroid said:
I agree... it is clearly an HBOOT driver issue or the phone... Windows (PC host) drivers are seperate. I was just running out of ideas really
The only definate way of knowing if it is the device that is causing this issue is if you were to try it on a non-Windows related OS, like Linux and maybe it would work for you using an Ubuntu Live CD.
Click to expand...
Click to collapse
well this is good idea...do you think it could also fix the usb issue for windows when i will root my phone in linux?
benefic said:
well this is good idea...do you think it could also fix the usb issue for windows when i will root my phone in linux?
Click to expand...
Click to collapse
Yes, because it is not as fussy with drivers as Windows is - with Windows, they have to be properly removed from its cache. With Linux, the phone should be detected ok (unless the phone is at fault).
Here is a simple guide that you can follow:
http://rootmydroid.co.uk/guides/desire/howtolinux-root-your-desire-using-unrevoked-in-linux/
Keep those fingers crossed
MasDroid said:
Yes, because it is not as fussy with drivers as Windows is - with Windows, they have to be properly removed from its cache. With Linux, the phone should be detected ok (unless the phone is at fault).
Here is a simple guide that you can follow:
http://rootmydroid.co.uk/guides/desire/howtolinux-root-your-desire-using-unrevoked-in-linux/
Keep those fingers crossed
Click to expand...
Click to collapse
So, linux didnt work either, system didnt even recognize that anything was plug in. Even crossed fingers dident help Well only last thing I have to ask, if there is any possibility to recover hboot, restore it somehow. Forexample through recovery menu in hboot loader and some kind of .zip file, that i will put to SD card. If not, well I will have to step out to that freezing weather and walk to orange store for reclamation, which I hope would be positive for me, but something telling me it surely will.
I found something about usb unbrick here on xda forum, but is only for root phones
well i found this http://forum.xda-developers.com/showpost.php?p=9056719&postcount=15 i think it could work, just i dont know a way how to discover my CID number..to modify mtd0.img file
ok, i did everything step by step using rageagainstthecage tutorial, but nothing happend at all.
If anyone could help...
Are you able to get into Fastboot?
I suppose running your stock RUU in Hboot won't make a difference then... how about trying the PB99IMG method, which involves renaming the extracted rom.zip file to PB99IMG.zip from your stock RUU, placing this to the root of your SD card and then letting it run from Fastboot mode. This would restore your stock Hboot. You could also try AlphaRev's modified 0.93 HBOOT with S-OFF?

[Q] wildfire cannot downgrade to create s-off

Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
wattamega said:
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
Click to expand...
Click to collapse
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
no usb comms when in command prompt / adb
eventcom said:
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
--------------------
Thanks eventcom, but I've followed that link and numrerous others and they all follow the same theme.
here is the problem as I see it...
1/I have installed the android driver when in hboot and it works ok as per attatched image
2/ I have installed htc_sync_setup 3.2.20.exe which is the latest driver availiable from the htc website.I then uninstall HTC sync, which leaves HTC driver installer & HTC BMP USB driver remaining as installed ( as per instructions)
3/ I have uninstalled any other USB programs which might conflict including Itunes and ascociated garbage (no i didn't put it there my kids did!).
USB debugging is turned on & when i plug in USB i go charge only (as per instructions)
Here's a hint...
When I execute an adb commandwithin command prompt eg [adb devices] i get no devices. When I issue a adb copy command I get the result "device not found" I'm know i'm going nowhere on this until I can get device to properly talk via adb and this is the assistance that i am seeking
further info.
I've tried this procedure on another (winxp) machine with same results.
Ive tried this procedure on another wildfire "s" (that is already rooted) same results
I've temporarily disabled the AVG 2012 virus protection & firewall.
As well as being in the directory that the file adb.exe exists I have also installed SDK so adb appears to run in any directory (please explain ?)
If i plug in usb and go "mount sd card" I can access the sd card on the phone viawindows explorer . in my mind this tells me that I have correct usb driver working.
I've tried a different usb cable AND a different phone
before I uninstalled htc sync i tried it out. it doesn't work and the phone won't sync up to this program ( it rarely works this program, tried it on numerous pc with different htc devices and more often than not it doesn't work)
I'm hoping that someone who is experienced in adb can help me get the phone talking with my pc, keeping in mind that I've done almost everything that I can think of to get my phone to "talk: via usb cable and issue commands. If I can't get my phone to communicate via adb then there is no way I can get past step one
please help me
wattamega said:
--------------------
please help me
Click to expand...
Click to collapse
i shall do my very best
ok so what system are you currently running? (win7,vista,xp ect)
are you using the stock usb cable that came with the phone?
when you connect the device to the pc with usb debugging turned on do you get the usb debugging notification in your status bar on the phone?
when you plug your device into the pc with debugging enabled what does your device manager recognize it as? mine shows up as attached...
did your antivirus flag up when you were installing the skd or downloading the adb.exe?
Success with debranding but problems with Revolutionary recovery
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
wattamega said:
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
Click to expand...
Click to collapse
That's ok , power is meant to do that, its the back button you need to use the trackball to select stuff also if I remember correctly that recovery has an issue where it will not charge the phone when it is turned off, so I would update that asap I shall give you a link when I'm out of bed, but for the mean time, backup, wipe everything and install cm7+ gapps
ok here is the most up tp date cwm recovery for the buzz as far as i know. and here is the thread it came from something to note, when you jump up tp gingerbread the type of recovery changes as well, so, the new one will not flash sense roms unless the rom has been designed for the new edify type recovery. not sure how many support this though. also the new recovery will NOT flash radios. it does not play well with others but you can always downgrade your recovery temporarily if you need to, or use the rom manager app (which ic an app interface for the recovery) to flash what you need
Sent from my HTC Sensation using xda premium
Success at last
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
wattamega said:
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
Click to expand...
Click to collapse
no problem man glad your all kitted out!
wow that cheap this phone cost me £140 when i bought it!!! ( a few years ago) man i got ripped off.... still glad to hear you got sorted out you should always read everything you can carefully before you go flashing your phones
also, just so you know, this wildfire is code named BUZZ and your wildfire s is code named MARVEL just to avoid confusion of course if you need any help with the marvel just let me know. i imagine you've been over to the marvel forum ect but if you get lost pm me. i have experience with that phone as well aside from the name they are completely different, and the marvel does not have s-off yet :/ not by software anyway so everything is different to do :/ still i am rambling now glad your sorted mate :good:

Device not detected in ADB, unable to boot into recovery

Hey guys,
So, I tried to turn my T-Mobile into a GPE. Everything went OK, pushed the RUU - and it hanged for a long time, so I quit out. Tried pushing it again, ADB not detecting the phone anymore - reinstalled drivers, rebooted everything - phone detected on pc as "My HTC", still no device detected in ADB. Rebooting the phone leads to the white HTC screen, booting into bootloader works but it's black for some reason, and I'm unable to boot into recovery - The OS text is red and reads "OS-3.32.531.2 (2.12.1700.1)". I've been trying to look for a solution for the past couple of hours but all the solutions require ADB to work, and all the solutions to get ADB to work are not solving it, so at this point I'm kinda stuck.
Any and all help would be appreciated greatly.
Thanks in advance!
I don't know if there's a t-mobile ruu available but if so, you can try and run that. I would simulate the battery pull first and then see if it recognizes it. From what you described for your os, mine would show that during the process of upgrading firmware
There is a T-mobile ruu in T-mobile one m8 general
Is it possible to run an RUU when the PC doesn't recognize the device properly?
Salabrin said:
Is it possible to run an RUU when the PC doesn't recognize the device properly?
Click to expand...
Click to collapse
Nope. It uses adb/fastboot.
Try uninstalling all HTC Sync and HTC drivers. Then plug the phone, go to Device Manager, find the device and select the option to manually select a driver, then pick Generic MTP Android Device (or something like that).
Also, bootloader screen on GPE is supposed to be black.
So I ran an RUU, it gives me an image error - I changed the CID earlier to install GPE, is that what might be causing the issue? If so, is there a way to change the CID without adb(Still can't get it to detect the phone)?

Categories

Resources