Firstly, see here . Then, how to modify service.jar to be optimized for gaming?
Note: This is not talking about patching service.jar for V6
Sent from my GT-I8150 using xda premium
eryzerz said:
Firstly, see here . Then, how to modify service.jar to be optimized for gaming?
Note: This is not talking about patching service.jar for V6
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Use CM + custom Kernel with LowMemoryKiller management of not killable processes + Greenify and leave service.jar alone.
honeyx said:
Use CM + custom Kernel with LowMemoryKiller management of not killable processes + Greenify and leave service.jar alone.
Click to expand...
Click to collapse
Ive do that. But, i still want to optimizing gaming perform in our device
Sent from my GT-I8150 using xda premium
Related
These are tweaks to improve the smoothness and performance of the phone
Original Post: http://forum.xda-developers.com/showthread.php?t=1236779
Great work.Can u explain how to wipe init.d folder?
Sent from my GT-I9000 using XDA App
androiderrr said:
Great work.Can u explain how to wipe init.d folder?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
with root explorer removed all files there
does this work on MIUI galnet?
Sgs4G doesnt have a miui ROM yet so I haven been able yo test that but im sure it does, make a nandroid back up before testing
Sent from my SGH-T959V using XDA Premium App
dsexton702 said:
Sgs4G doesnt have a miui ROM yet so I haven been able yo test that but im sure it does, make a nandroid back up before testing
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
its cm7 based.
why does the init.d folder has to be cleaned before use???
Mathijs
Sent from my GT-I9000 using Tapatalk
mathijs727 said:
its cm7 based.
why does the init.d folder has to be cleaned before use???
Mathijs
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
just to make sure init.d files dont conflict with each other
Sent from my SGH-T959V using XDA Premium App
Where is init.d folder?There is init and init.rc folder but nothing like init.d????
Sent from my GT-I9000 using XDA App
Must i have ext4 partition?
Or can i use orginal samsung partition rfs.
Thanks
androiderrr said:
Where is init.d folder?There is init and init.rc folder but nothing like init.d????
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
/system/etc/init.d
Sent from my SGH-T959V using XDA Premium App
djsven said:
Must i have ext4 partition?
Or can i use orginal samsung partition rfs.
Thanks
Click to expand...
Click to collapse
Its recommended to have ext4, ill be making another version for rfs if you wanna wait on that
Sent from my SGH-T959V using XDA Premium App
Init.d folder located under system/etc.But its already empty.What should i do now?Should i delete the folder too?
Sent from my GT-I9000 using XDA App
dsexton702 said:
Its recommended to have ext4, ill be making another version for rfs if you wanna wait on that
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
what about yaffs for cm7/miui folks?
Installed it after clearing my Init.D folder. Everything is ok. Wondering in what way I should really notice the difference? I am on stock Deodexed JVR with TalonDev kernel. Smooth as butter, but what makes it even smoother by using this tweak?
androiderrr said:
Init.d folder located under system/etc.But its already empty.What should i do now?Should i delete the folder too?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
No you cannot friend, just run tweak in recovery
Desotho said:
Installed it after clearing my Init.D folder. Everything is ok. Wondering in what way I should really notice the difference? I am on stock Deodexed JVR with TalonDev kernel. Smooth as butter, but what makes it even smoother by using this tweak?
Click to expand...
Click to collapse
it makes the performance of the mounts better
its makes i/o much better by having the hexedited sqlites
gives you the newest fugu mod(original mod is 3.0 honeycomb, im using 3.1)
Don't mind the numbers in Quadrant and
Look @ my sig
SGS is notable faster!
«« §tock Od-Ex JVR with ©Stock+ v1.41 on ®TW Louncher 4.5 »» @ Semaphore 1.60 boosted on AcidTweaksv6 #2900 Quadrant
dsexton702 said:
Its recommended to have ext4
Click to expand...
Click to collapse
what about ext4 no journal ?
mukuro said:
what about ext4 no journal ?
Click to expand...
Click to collapse
the script disables journaling so data=writeback
so you'll be fine
dsexton702 said:
the script disables journaling so data=writeback
so you'll be fine
Click to expand...
Click to collapse
thank you very much, i'll try it
I have creed V2 and can i delete some scripts in the init.d folder? I want to use v6 supercharger. Who uses scripts and who uses supercharger,
Sent from my GT-S5360 using xda premium
Heartlessangel2001 said:
I have creed V2 and can i delete some scripts in the init.d folder? I want to use v6 supercharger
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yes delete them all
Heartlessangel2001 said:
I have creed V2 and can i delete some scripts in the init.d folder? I want to use v6 supercharger
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
yeah, delete them all, they're not running anyways
What are the scripts that are not working?
Sent from my GT-S5360 using XDA
how can i set it to run at boot? and how do i know if its working??
Sent from my GT-S5360 using xda premium
dennisaguilajr said:
how can i set it to run at boot? and how do i know if its working??
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
1.just use scriptmanager to make sure your tweak run afterboot or use kernel that support init.d so dont need again scriptmanager.
2.try simple script like change value of dirty_ratio then look before and after.
Thats good if i add v6 supercharger,and stamatis tweak?
I fear thats will make conflict
Sent from my GT-S5360 using xda premium
I think its not necessary, Repencis ROM already has tweaks, and it may conflict.
Thanks
Sent from my GT-S5360 using xda premium
no
repencis rom is good and there is no need to add any tweaks
you can look at init.d folder under system/etc ,,, there are have tweak,,, you must remove tweak before want to applied any tweakk,,,,
repencis rom is good and there is no need to add any tweaks :good:,, sirr
need help, i really cant enable my seeder, it keep asking like this.. could anyone teach me how and what i need to enable it? i already have init.d support, busybox
Yes me too, anyone help plz
Sent from my GT-I8150 using xda premium
gameboy20131 said:
Yes me too, anyone help plz
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
finally, u know what gameboy, i just flash hurtsky v2.4 kernel, then i try again, walaaa, its success, i can enable it, uh, previously i was using madridi kernel. u may try, it work for me now, or we just wait for another to reply.
hanafi200 said:
finally, u know what gameboy, i just flash hurtsky v2.4 kernel, then i try again, walaaa, its success, i can enable it, uh, previously i was using madridi kernel. u may try, it work for me now, or we just wait for another to reply.
Click to expand...
Click to collapse
Ok thnx hanafi, btw, are u arabic?
Sent from my GT-I8150 using xda premium
gameboy20131 said:
Ok thnx hanafi, btw, are u arabic?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
nope, im malaysian, :fingers-crossed:
Aha, thx anw
Sent from my GT-I8150 using xda premium
This is because frandom in madridii kernel, but madridii said this is normal because using frandom only is enough.
If you want seeder.apk working, try another kernel..
Sent from my GT-I8150 using xda premium
eza azami said:
This is because frandom in madridii kernel, but madridii said this is normal because using frandom only is enough.
If you want seeder.apk working, try another kernel..
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Ya u r rite. Now I'm using hurt sky. And its done. Thanks anyway.
Sent from my GT-I8150 using Tapatalk 4 Beta
hanafi200 said:
Ya u r rite. Now I'm using hurt sky. And its done. Thanks anyway.
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Any time
Sent from my GT-I8150 using xda premium
hanafi200 said:
need help, i really cant enable my seeder, it keep asking like this.. could anyone teach me how and what i need to enable it? i already have init.d support, busybox
Click to expand...
Click to collapse
i have this problem on one of a kind rom v25 with hurtsky kernel 3.7 when i removed seeder from system/etc and i installed seeder 2.0.0 apk
Redwraith96 said:
i have this problem on one of a kind rom v25 with hurtsky kernel 3.7 when i removed seeder from system/etc and i installed seeder 2.0.0 apk
Click to expand...
Click to collapse
Use another kernel which not use frandom. in latest version hurtsky and madridii kernel use frandom feature, so you can't use seeder anymore. Because you can't use frandom and seeder in same time..
CMIIW
sorry for my bad English
Sent from my GT-I8150 using xda premium
Redwraith96 said:
i have this problem on one of a kind rom v25 with hurtsky kernel 3.7 when i removed seeder from system/etc and i installed seeder 2.0.0 apk
Click to expand...
Click to collapse
it mean now u cannot use seeder 2.0 that u just install after removing it? quite confusing?
im trying this mod, i thought it will make my sgw different, but no, now my seeder dont work anymore how to remove it? any try it?
http://forum.xda-developers.com/showthread.php?t=2362554
hanafi200 said:
it mean now u cannot use seeder 2.0 that u just install after removing it? quite confusing?
Click to expand...
Click to collapse
Yes,I did so because I could not manually calibrate as I wanted the app as it is already integrated in the rom only the script file
sorry for my bad english
Redwraith96 said:
Yes,I did so because I could not manually calibrate as I wanted the app as it is already integrated in the rom only the script file
sorry for my bad english
Click to expand...
Click to collapse
Try another kernel?
Sent from my GT-I8150 using Tapatalk 4 Beta
hanafi200 said:
Try another kernel?
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thank you I flash Honeyx kernel and now seeder run
eza azami said:
Use another kernel which not use frandom. in latest version hurtsky and madridii kernel use frandom feature, so you can't use seeder anymore. Because you can't use frandom and seeder in same time..
CMIIW
sorry for my bad English
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks for clarifying that for users ..
I will add this note to my thread with next release
Sent from my GT-I8150 using xda premium
Madridii said:
Thanks for clarifying that for users ..
I will add this note to my thread with next release
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
also thanks for take it seriously, i really appreciate it sir, :good: