To connect to computer it says it requires Kies 3 should we update it? or it will have some problem?:highfive:
KIES will auto-update by itself, so I'd say go ahead with KIES. But I don't like "leaked" OS, unless it becomes official for another region.
Related
Hey guys,
Updated KIES yesterday (Version 2.3.2.10454_19), and I'm now not able to connect my Galaxy S2.
I'm using the Mr. X Telus Mobility ROM, which as I understand is still the stock ROM.
Is anyone else having the same problem?
Windows 7 Enterprise x64, and, yes, I have rebooted
A lot of times Kies won't recognize a rooted phone.
Sent from my SGH-T989 using xda premium
When I had a Galaxy Fascinate (Telus) I had to unroot my phone, after re-installing a base Telus Rom, in order to get Kies to work. I think Kies is just very sensitive..... now I don't even bother with Kies.... so many other ways to communicate with the phone.
It took me a few tries to get a connection, The trick I found was to run Kies as admin, and it worked for me
Try restarting your computer if you just updated kies
Sent from my SGH-T989 using XDA
I had this issue before and I had to uninstall Kies, reboot then put it back.
Also make sure you're using a good cable.
VacTacks11 said:
Hey guys,
Updated KIES yesterday (Version 2.3.2.10454_19), and I'm now not able to connect my Galaxy S2.
I'm using the Mr. X Telus Mobility ROM, which as I understand is still the stock ROM.
Is anyone else having the same problem?
Windows 7 Enterprise x64, and, yes, I have rebooted
Click to expand...
Click to collapse
I have the same problem.
I plugged in my Telus S 2X.
Kies recognized, said there was firmware upgrade for the phone (ICS I expect), but instructed that I had to update Kies on my Win 7 computer (Win 7 Pro 64 bit) in order to update the phone.
I updated to the latest Kies (June 12 update). It no longer would connect to the phone. I ran the connection troubleshooter. No change. I uninstalled & reinstalled Kies & drivers on the computer. Rebooted several times. No change. I ran as an admin. No change. I made sure debug on the phone was off & tried a number of cables & USB ports.No difference - still no connection.
The prompt says: "cannot start service on the device"
BTW, my Telus Galaxy Note is recognized by the new Kies.
The s2 x works on Kies air as well - just not on Kies USB, which is required for the firmware update.
EDIT: After multiple tries, it just kicked in - didn't do anything other than what I specified above (??!!)
Same here. Kies will not pick up my phone :-(
Sent from my SGH-T989D
About KIES
KIES is help to use back up you entire media library . so you can update the mobile .KIES content air applications.
Only if you're running stock remember ....I think.
Sent from my SGH-T989 using Tapatalk
I tried both Kies v2.0.0.12095_7 and v2.5.0.12094_28 on my Mountain Lion and Windows 7 and both are useless.
On Mac OS version:
No auto launch when plugged in a USB port.
It can connect to Kies.
FW: Your device does not support software upgrading via Kies.
On Windows version:
Kies automatically launches when plugged in a USB port.
It could not connect to Kies. It took ages not to connect to Kies.
Warning: Hardware ID Missing
Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device.
For assistance, contact the hardware manufacturer.
What is Kies doing with Samsung Mobiles????
"Your device does not support software upgrading via Kies."
This message appears when there are no updates available.
As for Kies itself though. Yes, it's a complete turd. Worse even than the Windows version of iTunes, and that takes some doing!
Did you try updating ota?
Sent from my Note2 using Tapatalk 2
I did it on my previous phone, SGS2 but not yet on Note 2 LTE.
ScottXe said:
I did it on my previous phone, SGS2 but not yet on Note 2 LTE.
Click to expand...
Click to collapse
Oh you have a note 2 lte. Kies won't recognise your phone before at least one update is available. Kies servers contains only phone updates and since your phone never had an update it can't recognise it. The same thing happened with my n7100 before the lj1 update release.
Sent from my GT-N7100 using xda app-developers app
Ok So I did do TONS of searches and I cant find a single answer anywhere on Google. I updated the S3 to the new official Jelly bean. I lost my root. I rerooted. Installed CMW via odin and super user. Now I got myself some usb issues. My phone wont mount. It connects to the USB, I dont get any errors but it just wont open. It just says connected. I REALLY do not want to recover back to stock and lose all my stuff again.
I reinstalled kies and the drivers. Didnt work. Also replaced cmw with twrp but that didnt do much either.
I would try downloading USB Host Diagnostics and see if it can tell you what is going on with your USB issues.
Interesting problem - phone continues to say "Software Update Interrupted". Even after manually updating to Android 4.1.2
AT&T Samsung Galaxy Note 2
Samsung-sgh-I317
I encounter no problems with my phone, but this phone puzzles me.
Friend tried to update phone - said gave me an error. Phone is not rooted, stock ROM. There was an attempt to unlock the SIM using keypad *#..... I do not know if there were any problems.
I tried
1. Setting date ahead 2 days, 2 months ....
Result: A check for software update returned "Software Update Interrupted"
2. Tried to reflash ROM using Odin to stock
Result: Failed, tried several times - lost connection - tried different USB cable failed
3. Reset phone to factory defalts "
Result: A check for software update returned " Software Update Interrupted"
Update successful by
Manual update: downloaded update.zip to microSD card. Installed update Reboot into recovery (turn phone off, press volume up, center button and power) Install update from external sdcard
Result: Phone is now running 4.1.2 with Mult Window !!!
BUT
A check for Software update results in "Software Update Interrupted"
Should say "Current software is up to date"
Is there some switch that needs to reset?
Is ATT blocking the phone by IMEI?
What is checked when software update is run?
Phone works fine - person does not want to have ATT replace phone with a refurb under the warranty.
Any help would be appreciated.
Thanks.
Im having this same exact issue.. Had my note 2 for about a month now..When i first got it had no problem with getting OTA update to 4.1.2 but had flash back to stock firmware 4.1.1 via sammymobile because that is latest version they have listed and now me too had to do manual update rom zip via sd card.. Keep getting the software update interrupted.. I just wonder if there update "servers" are having issues? As i say two weeks ago had no issues..
screw it..flash a "custom" stock rom....cleanrom will work fine for you
Or just turn off the updates via tibu or app manager.
You need to turn off:
Att update and FWupdate .
But yeah otas
flash a custom rom and youll forget all about ota.
Gl
Want OTA to work again
Custom ROMs are not really a good option. This person still remembers the update to their MPX220, and the Chinese Character set. Simple fix to change the language, but huge impact.
I would really like to get the OTA updates working again, so I can say update your own phone.
----
The OTA update servers are working fine. Works on other notes on same network.
I would really like to know what the OTA update servers are checking for and why they are blocking the update.
Thanks.
I love my "note 2"
66wolf said:
Custom ROMs are not really a good option. This person still remembers the update to their MPX220, and the Chinese Character set. Simple fix to change the language, but huge impact.
I would really like to get the OTA updates working again, so I can say update your own phone.
----
The OTA update servers are working fine. Works on other notes on same network.
I would really like to know what the OTA update servers are checking for and why they are blocking the update.
Thanks.
I love my "note 2"
Click to expand...
Click to collapse
yeah, that comment will go over like a fart in church around here. You're comparing some c r a p from ten friggen years ago. You might want to do a little more reading
Have you done a factory reset of the device since the update?
use the stock recovery and reset it. .
The firmware update to UCAMA4 may have corrupted your data.
And does the device show "normal" status. .??
If yes. ..the data wipe should help. ...and wipe cache also. ..g
66wolf said:
Interesting problem - phone continues to say "Software Update Interrupted". Even after manually updating to Android 4.1.2
AT&T Samsung Galaxy Note 2
Samsung-sgh-I317
I encounter no problems with my phone, but this phone puzzles me.
Friend tried to update phone - said gave me an error. Phone is not rooted, stock ROM. There was an attempt to unlock the SIM using keypad *#..... I do not know if there were any problems.
I tried
1. Setting date ahead 2 days, 2 months ....
Result: A check for software update returned "Software Update Interrupted"
2. Tried to reflash ROM using Odin to stock
Result: Failed, tried several times - lost connection - tried different USB cable failed
3. Reset phone to factory defalts "
Result: A check for software update returned " Software Update Interrupted"
Update successful by
Manual update: downloaded update.zip to microSD card. Installed update Reboot into recovery (turn phone off, press volume up, center button and power) Install update from external sdcard
Result: Phone is now running 4.1.2 with Mult Window !!!
BUT
A check for Software update results in "Software Update Interrupted"
Should say "Current software is up to date"
Is there some switch that needs to reset?
Is ATT blocking the phone by IMEI?
What is checked when software update is run?
Phone works fine - person does not want to have ATT replace phone with a refurb under the warranty.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Can you please give me the link to that download because I tried doing what you said as in going into recovery and flashing a zip update I got from sammobile.com and it didn't work. My Note 2 is stuck on 4.1.1 and gives me that Software Update Interrupted stuff.
Jcamacho228 said:
Can you please give me the link to that download because I tried doing what you said as in going into recovery and flashing a zip update I got from sammobile.com and it didn't work. My Note 2 is stuck on 4.1.1 and gives me that Software Update Interrupted stuff.
Click to expand...
Click to collapse
I'm not sure what kind of update from Sam mobile is flashed through recovery.
Down load via odin is another matter.
There are update options available for mh3 in the dev section
Jcamacho228 said:
Can you please give me the link to that download because I tried doing what you said as in going into recovery and flashing a zip update I got from sammobile.com and it didn't work. My Note 2 is stuck on 4.1.1 and gives me that Software Update Interrupted stuff.
Click to expand...
Click to collapse
Sorry do not have the link anymore, it was to an old ROM March/April 2013. I found it on a forum on how to manually push the update via google.
The next update, the girl took it back to AT&T for a replacement.
New phone updates fine.
The FIX - replace the phone sad, since it probably was a software setting.
resolution
66wolf said:
Interesting problem - phone continues to say "Software Update Interrupted". Even after manually updating to Android 4.1.2
AT&T Samsung Galaxy Note 2
Samsung-sgh-I317
I encounter no problems with my phone, but this phone puzzles me.
Friend tried to update phone - said gave me an error. Phone is not rooted, stock ROM. There was an attempt to unlock the SIM using keypad *#..... I do not know if there were any problems.
I tried
1. Setting date ahead 2 days, 2 months ....
Result: A check for software update returned "Software Update Interrupted"
2. Tried to reflash ROM using Odin to stock
Result: Failed, tried several times - lost connection - tried different USB cable failed
3. Reset phone to factory defalts "
Result: A check for software update returned " Software Update Interrupted"
Update successful by
Manual update: downloaded update.zip to microSD card. Installed update Reboot into recovery (turn phone off, press volume up, center button and power) Install update from external sdcard
Result: Phone is now running 4.1.2 with Mult Window !!!
BUT
A check for Software update results in "Software Update Interrupted"
Should say "Current software is up to date"
Is there some switch that needs to reset?
Is ATT blocking the phone by IMEI?
What is checked when software update is run?
Phone works fine - person does not want to have ATT replace phone with a refurb under the warranty.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
I was able to resolve this look here
http://forum.xda-developers.com/showthread.php?t=2458784
Firstly, my problem is not simply updating, so it is a request to moderators for not locking this thread.
Now, here is the problem. I started upgrading my Wave II via Kies. It downloaded and said it was updating. But then it gave me a prompt saying that it will put me on a temporary firmware for backing up my data. So, technically this is the point that I am stuck on.
I mean, what do I do to go ahead of this.
I tried "Firmware Initialization" in the Tools. It says "GT-S8530" does not support Firmware initialization.
So what after this? When I open up my phone, it must be connected to the PC running Kies, and it always runs on Airplane mode. So it looks like it is meant only for backing up the data. So what do I do?
Either I want to upgrade to 2.0 or revert to the stock 1.2 just to fix this problem.
And also, I won't prefer unofficial method. As I have been having a few problems with my phone like Hanging. So if the problem does not get fixed with update, I may have to take it to a service center.
You can flash the rom you want thanks to multiloader.