[Q] Android System Recovery <3e> - Galaxy Note II Q&A, Help & Troubleshooting

Hello. I'm stuck in Android System Recovery <3e> and i need your help, thank you in advance.
I'm afraid to brick the phone and i'd really appreciate some fast help! I'm affraid the phone could run out of battery even if plugged in!
I downloaded Samsung Galaxy NoteII Toolkit V4.1.0
I installed the drivers
I started to root my phone, I chose the fifth option
"Will either push the selected root file to your Internal Storage, guide you through flashing Custom Recovery via Odin. When the device reboots it will bot to recovery so root files can be flashed + rename the recovery restore files. Or install the zip file via adb sideload after recovery boots. plus busybox will also be installed"
Click to expand...
Click to collapse
I went trough Odin, and then when the phone was detected I chose cwm and it rebooted again, it went in Android System Recovery <3>
I can read this
Android System recovery <3e>
Volume up down to move highlight
power button to select
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset.
wipe cache partition
Apply update from cache
#MANUAL MODE#
--Appling Multi-CSC...
Applied the CSC-Code: DBT
Successfully applied multi CSC.
Click to expand...
Click to collapse
The toolkit told me to press any button when i was in sideload mode. So i pressed and it said "error: closed" then i sayed press any button when file installed ready to reboot (something like that). I tried and i pressed a random key and it said "error: closed" and went back to main menu and i'm still in Android system recovery <3e>
Now, i'm still plugged to the computer. I'd would like to start all over. What should i do? Reboot system now? unplug the phone? Take the battery out? I already tried power + volume up combo. It reboot and goes back to where i was.
I'm afraid to brick the phone and i'd really appreciate some fast help! I'm affraid the phone could run out of battery even if plugged in!
Edit: I took a shot and chose "reboot system now". Everything seems to work fine but Root checkers says i'm not rooted. I would like to know if i can start again without worrying about what happen?

greenortor said:
Hello. I'm stuck in Android System Recovery <3e> and i need your help, thank you in advance.
I'm afraid to brick the phone and i'd really appreciate some fast help! I'm affraid the phone could run out of battery even if plugged in!
I downloaded Samsung Galaxy NoteII Toolkit V4.1.0
I installed the drivers
I started to root my phone, I chose the fifth option
I went trough Odin, and then when the phone was detected I chose cwm and it rebooted again, it went in Android System Recovery <3>
I can read this
The toolkit told me to press any button when i was in sideload mode. So i pressed and it said "error: closed" then i sayed press any button when file installed ready to reboot (something like that). I tried and i pressed a random key and it said "error: closed" and went back to main menu and i'm still in Android system recovery <3e>
Now, i'm still plugged to the computer. I'd would like to start all over. What should i do? Reboot system now? unplug the phone? Take the battery out? I already tried power + volume up combo. It reboot and goes back to where i was.
I'm afraid to brick the phone and i'd really appreciate some fast help! I'm affraid the phone could run out of battery even if plugged in!
Edit: I took a shot and chose "reboot system now". Everything seems to work fine but Root checkers says i'm not rooted. I would like to know if i can start again without worrying about what happen?
Click to expand...
Click to collapse
use this :good:
http://forum.xda-developers.com/showthread.php?t=2445480

pijiey2 said:
use this :good:
http://forum.xda-developers.com/showthread.php?t=2445480
Click to expand...
Click to collapse
Thank you very much but i still have a slight problem. How do i know what has been modified? for example: has CWM been installed on my Note?
Thanks in advance.

If u follow the step in aroma, u should have cwm

Related

[Q] Phone keeps rebooting to Clockwork Mod Recovery

I did everything correct and for some reason, my phone keeps rebooting to the clockwork mod screen...it will not reboot and restart like normal... what gives? Do I have to ODIN and REDO this whole thing?
taseedorf said:
I did everything correct and for some reason, my phone keeps rebooting to the clockwork mod screen...it will not reboot and restart like normal... what gives? Do I have to ODIN and REDO this whole thing?
Click to expand...
Click to collapse
If it auto reboots and you literally can't do anything, all you can do is a battery pull. Then start from scratch. Hopefully, you can still go into download mode.
Well, I can reboot and then it just goes to the Clockwork Mod Recovery Screen. When I click reboot system now, it does so and then just goes to the clockwork screen again....
Sounds like you may want to odin then retry cwm
Do you have any NAND backups? If you do you could try that, if not then Odin is your friend!
Sounds like you tried to goto a new Rom like i did
Odin then follow directions completely
When i was going to bonsai from ee i forgot to install cwm3 first and my phone started to do what your phone is doing
Sent from my SPH-D700 using Tapatalk
Yeah I think I may have not ran the ext4 zip file....
So, the steps are as follows...
One Click it....etc...etc...
Backup
Run the ext4 zip
Flash Rom (in my case, Bonsai)
reboot?
Is there any significant performance boost or anything with this phone? I NEEDED to do it with my HERO...but, this phone seems super fast and nice without anything needing to be done. I do like modding and such, but do not want to deal with occasional glitches just to gain some slight speed and battery drainage..
Ok so i didn't put phone into USB debugging and it always goes to cwm screen
Can I just use a sd card reader and flash a rom to the sd card and then use the sd cards files?
For you since your at a cwm boot loop
Odin
Usb debugging
Root with cwm3
Reboot to cwm3
It will auto back up
Flash ext4
Flash bonsai
Go to cwm3 main screen
Go to backup and restore
Goto advanced restore
Pick your backup
Click restore data
Reboot
I had to do this because on my old Rom i had problems with my phone being super slow bonsai fixed it
Sent from my SPH-D700 using XDA App
YouTube , Randyshear + Odin + stock .
Follow instructions exactly, don't throw phone against the wall, IT WILL WORK.
You could just get an apple device and none of this brick stuff would happen.
i have simylar problem my phone get stock in cwm v2.5.1 and i have a message
it say E:can't open/cache/recovery/log i went to advanced mounts and storage
and find unmount /cache i did click to mount but went i hit back it change to unmount again some one please help. tanks.
****! i'm having the exact same problem!!! anyone find solution!!!
PLEASE!
clockwork mod get out of loop
hi guys just had same problem was pooing my self lol
you will need imei and serial numbers under battery
just hold volume up key and press power button keep holding volume up untill windows install 3 new drivers
lge mobile composite usb device
lge mobile usb serial port com 19
lge mobile usb modem
then after that
you can fire up lg mobile support tool click options&help tab set country then click customer support tab then click recovery phone and follow promts
phone will download new firmware and update take about half an hour to complete
Didn't realize the age of this post before I replied not sure why it got bumped. Lack of coffee on my part!
Mod can you close this

[Q] Defy recovery mode issues

I have a UK Defy on T-Mobile, running the FIN III ROM from this site.
I had recovery mode working OK before, but now when I boot into it (Using the button in the app), I just get a black screen.
If I hold voldown + power, I get an android dude with a ! icon, but sometimes afterwards I see this go on to a menu that seems to be recovery mode (With images on the screen, which it didnt have before) but no options for backup/restore, only things like wipe data and reboot, all in blue text. It says "Android system recovery <3e>" at the top in red.
At the bottom, it says:
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/caller
The original (working) version of cwm was all green text with no graphics, so something is different...
Any ideas on what I should do?
evilc said:
I have a UK Defy on T-Mobile, running the FIN III ROM from this site.
I had recovery mode working OK before, but now when I boot into it (Using the button in the app), I just get a black screen.
If I hold voldown + power, I get an android dude with a ! icon, but sometimes afterwards I see this go on to a menu that seems to be recovery mode (With images on the screen, which it didnt have before) but no options for backup/restore, only things like wipe data and reboot, all in blue text. It says "Android system recovery <3e>" at the top in red.
The original (working) version of cwm was all green text with no graphics, so something is different...
Any ideas on what I should do?
Click to expand...
Click to collapse
Yes, the factory recovery mod for 2.2 froyo is different then 2.1...the green one you mentioned is actually the custom recovery mode which you can boot in through clockworkmod recovery apk...
I still don't get your problem
turn usb debugging off.
thats all.
amansth said:
turn usb debugging off.
thats all.
Click to expand...
Click to collapse
thats correct!
D'uh, OK - another case of usb debugging screwing things up. It seems that widgetsoid is not working properly on my rom or something, cause the toggle for that was showing it was off..
E:Can't open/cache/recovery/command defy
Android system recovery <3e>
pays 5.1 rom
cwm
E:Can't open/cache/recovery/command
have tried every thing to fix plz help
usb debugging off and still get error
are you absolutely sure usb debugging is really off?
Do you have adb installed, if so - what happens if you plug in usb and do a "adb devices"? It shouldn't show up...
Also I have a question - isnt the point of recovery mode that it is independant of the OS? What happens if usb debugging is on, but your OS goes tits up - how can you enter recovery mode then? Can you disable it from outside the OS? If so, why is this not part of cwm?
Yes did that check I also have a custom clockwork installed so I guess I may have 2 recoveries installed. I guess I need to remove e3's and jusy ust clock work.
Enter recovery outside os is vol down plus power.
Cwm runs inside the os. So yes good question how do we install cwm in to take the place of the old recovery? Vol down plus power to boot cwm instead of a3
Sent from my MB525 using XDA Premium App
amansth said:
turn usb debugging off.
thats all.
Click to expand...
Click to collapse
Thanks after messing on google for 2weeks.. i tout my phone is crap.. finaly u saved me simple solution n worked.
It solved my "Android system recovery <3e>" screen problem on Defy froyo
merrittbruce said:
Yes did that check I also have a custom clockwork installed so I guess I may have 2 recoveries installed. I guess I need to remove e3's and jusy ust clock work.
Enter recovery outside os is vol down plus power.
Cwm runs inside the os. So yes good question how do we install cwm in to take the place of the old recovery? Vol down plus power to boot cwm instead of a3
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
1. Uninstall > ROM manager and then CWM, make sure to clear cache data. Go to filemanager n delete Clockworkmod folder.
2. Installed simple plain CWM (for me it was defy_recovery-1218-0326-signed.apk)
3. Set USB Debugging OFF.
I dont know if it will work.. bt give it a try. Worked for me though.
evilc said:
Also I have a question - isnt the point of recovery mode that it is independant of the OS? What happens if usb debugging is on, but your OS goes tits up - how can you enter recovery mode then? Can you disable it from outside the OS? If so, why is this not part of cwm?
Click to expand...
Click to collapse
This is an interesting question that I want to know as well.
In addition I was also thinking what if your phone is dead as far as ROM and OS goes but you have a backup file (cwm/nandroid). Do you just flash it with a booloader and then can you somehow recover your backup ?! (or do you need cwm/nandroid installed too)
(I'm new to all this, so apologies in advance...)
Wierd
My defy only boots into the recovery menu what to do now?

[Q] cant install root file from internal storage?

Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
eddyg519 said:
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
Click to expand...
Click to collapse
Sounds like the root method you are using is just way to complicated. Follow this one here http://forum.xda-developers.com/showthread.php?t=1739426 it has prerooted firmwares that you just install with odin and you are done (cwm included). Just make sure you grab the right firmware for your carrier.
If I have helped you out, slap that thanks button.
aeppacher said:
Sounds like the root method you are using is just way to complicated. Follow this one here http://forum.xda-developers.com/showthread.php?t=1739426 it has prerooted firmwares that you just install with odin and you are done (cwm included). Just make sure you grab the right firmware for your carrier.
If I have helped you out, slap that thanks button.
Click to expand...
Click to collapse
Beauty I think its flashing the rogers rom to my phone from there Im good to load other roms using this odin tool? (or is it rom manager?)
also what is this clockwork mod ? I might as well go into play store and get both rom manager and clockwork?
- eddy
So After I flashed the new rom to my phone i left it plugged in and it restarted. Android loader popped on and now it says android is upgrading... starting apps. Its been like this for over a half an hour... what do i do??? helpppp dont really want to reset it but it is bricked? or do i have to reload ?
update:
held the restart button down it restarted bit is still stuck on starting apps.
update two:
held vol down home and reset tried to reload the rogers rom onto the phone and now it stops at samsung load screen. Do i have to reload the carrier that came with the phone? I cant quite remember what the original carrier was.
UPDATE THREE:
I as able to boot back into the phone but...nothing changed? i ended up wiping the phones data in settings because its too full as it is. I downloaded root checker and it said access was denied ? That makes its not rooted after all... I followed the directions seems that they didnt take? Any clues?
eddy
eddyg519 said:
So After I flashed the new rom to my phone i left it plugged in and it restarted. Android loader popped on and now it says android is upgrading... starting apps. Its been like this for over a half an hour... what do i do??? helpppp dont really want to reset it but it is bricked? or do i have to reload ?
update:
held the restart button down it restarted bit is still stuck on starting apps.
update two:
held vol down home and reset tried to reload the rogers rom onto the phone and now it stops at samsung load screen. Do i have to reload the carrier that came with the phone? I cant quite remember what the original carrier was.
UPDATE THREE:
I as able to boot back into the phone but...nothing changed? i ended up wiping the phones data in settings because its too full as it is. I downloaded root checker and it said access was denied ? That makes its not rooted after all... I followed the directions seems that they didnt take? Any clues?
eddy
Click to expand...
Click to collapse
Okay buddy looks like you need to learn some basic android 101
You are definitely not ready to root or do anything til you learn this stuff...
Okay, so first is recoveries. Basically recoveries are a bit of software that let's you flash ROMs, kernels, and whatever else to your phone. When you hold volume up and power when your phone is off, you boot to recovery. Now basically recoveries are necessary because when you are flashing a new ROM it essentially deletes the android system from your phone first so this is a way of your phone still working between flashes.
Clockworkmod is a custom recovery with a lot of features meant for flashing ROMs. There are competitors such as TWRP (team win recovery project) but clockworkmod is a great starter. Use videos or tutorials on how to use it before you flash your first ROM. I can not stress how often you need to read read and read some more.
Okay so rooting your phone. Basically there is a "root" directory of your phone. Its where all the system files are stored and it let's you do a lot of stuff, but it also means you can screw a lot of stuff up to (like really screw it up). On default you are locked out of here by the maker of your phone for various reasons. Rooting means that someone found an exploit to gain access to this folder. Usually what you then do is you find a way to inject superuser (a little app that gives root access to other apps later on). You use Odin in this case to install a stock Samsung rom (with superuser already put in the root directory of that modified ROM its installing) essentially this means you have root. Root allows you to install recoveries like clockworkmod (which you need to flash ROMs later.
Okay so that was my quick run through. At your point you need to go to YouTube and Google how to root the sgs3 and hopefully they should have one for your specific carrier. The process should be the same minus the files you flash. Essentially you should be looking for stock ROM (for your specific device) with superuser or supersu already installed. Then you should be finding a way to install clockworkmod once you have root. (You may be able to find a file or tutorial that does this in one go). I cannot emphasise enough about reading. You wouldn't be here had you read first and in the flashing business, if you don't want a sgs3 paper weight you should read first.
Oh and ROMmanager from the marketplace installs clockworkmod for you (ONCE YOU HAVE ROOT) its simple. Just download it from the play story. Click flash recovery. It will load a bit and your done. Then you can reboot into it. ROM manager (the paid version is unnecessary) it just adds extra features you don't yet need. Look at it once you have flashed your first few ROMs.
Best of luck. Let me know and slap that thanks button. I wrote this on my phone.
READ READ READ
eddyg519 said:
Hey guys im trying to root my device so i can install some lightweight custom roms. Ive been following this guide i found online
http://androidcritics.com/how-to-root-and-install-clockworkmod-recovery-on-galaxy-s3-i747/
I basically did this
Installing Clockwork Recovery Mod
Find the recovery image file which is clockworkmod.tar
On your Samsung Galaxy S3 I747, press and hold down the volume down, power, and home buttons
Once your at the warning screen, press volume up to accept
Launch the Odin program from your computer
In Odin, find the PDA tab and click it
Find the clockworkmod.tar.md5 file in the unzipped recovery image file
Press start to begin flashing the recovery mod
BE PATIENT! and wait until your device reboots
Once your device has fully rebooted, you can start installing root
It loaded on the phone fine. I then did this
Installing Root
Transfer the root.zip file onto your phone from your computer
Make sure you connect your s3 to your computer and find the root zip file and put it in your downloads folder.
Enter clockwork recover mod by holding down the volume up, power, and home buttons
Navigate by using the volume buttons to Install Zip > Choose Zip from Internal SD card > Navigate to the downloads folder> Select
Be Patient! and wait until your device is finished
Once the process is finished, you can select Reboot
Once your device has rebooted, launch the Google Play Store app
Search “SuperuserSU” and select the first app that shows in the search results
Install this app
Once it has finished installing, your done!
The only problem is I cant navigate to the option "install zip from internal sd card" I simply dont have though's options here is what I have when hold volume up reset and home
"reboot system now
apply update from ADB
apply update from external storage (which i dont have)
wipe data/factory reset
wipe cache partition
apply update from cache
When i hit apply update from ADB it says "now send the package you want to apply to the device with "adb sideload <filename>"...
Im wondering if the original flash didnt go thru? Why dont I have the options that I should?
Any help would mean the world trying to get this puppy up asap!
regards,
Eddy
Click to expand...
Click to collapse
Hi eddy,
It sounds like you didn't get CWM to stick after your flash with ODIN. You need to uncheck the reboot option in odin and then after the flash is done pull the battery and go directly into CWM loader by booting with the volume up + power + home button method. This will give you cwm rather than the stock loader you seem to be trying to use. You're almost there!
sxorpyon said:
Hi eddy,
It sounds like you didn't get CWM to stick after your flash with ODIN. You need to uncheck the reboot option in odin and then after the flash is done pull the battery and go directly into CWM loader by booting with the volume up + power + home button method. This will give you cwm rather than the stock loader you seem to be trying to use. You're almost there!
Click to expand...
Click to collapse
He also said root wasn't sticking. He needs that before he can cwm to stick
aeppacher said:
He also said root wasn't sticking. He needs that before he can cwm to stick
Click to expand...
Click to collapse
I think he can't install the superuser.zip from cwm after boot because he's allowing the stock rom to overwrite his cwm flash ... he's gotta pull his battery after the odin flash to get root in. That's what worked for me. once he's got root he can use rom manager to upgrade to cwm 6.x
sxorpyon said:
I think he can't install the superuser.zip from cwm after boot because he's allowing the stock rom to overwrite his cwm flash ... he's gotta pull his battery after the odin flash to get root in. That's what worked for me. once he's got root he can use rom manager to upgrade to cwm 6.x
Click to expand...
Click to collapse
He shouldn't need cwm to install. If flashes a firmware with root already injected he can then just use rom manager to install clockworkmod for the first time since rom manager just needs root which he will have. You can root and keep the stock recovery on at the same time
I think his biggest issue is root not sticking. Til he does that cwm wont install

[Q] Root Help Please SM T210R

I have CWM installed on my Tab 7 and when I go to install the universal root that I copied and pasted into the external SD I get two messages saying in red
"failed to verify whole file signature"
and one saying in red
"failed file signature"
I downloaded the universal zipped root file twice and its the same thing over and over. I have USB de bugging on too. Any help would be greatly appreciated. I have been up all night and been at it for hours trying to fix this issue.
PMK19 said:
I have CWM installed on my Tab 7 and when I go to install the universal root that I copied and pasted into the external SD I get two messages saying in red
"failed to verify whole file signature"
and one saying in red
"failed file signature"
I downloaded the universal zipped root file twice and its the same thing over and over. I have USB de bugging on too. Any help would be greatly appreciated. I have been up all night and been at it for hours trying to fix this issue.
Click to expand...
Click to collapse
When you select Install zip in CWM, select Toggle signature Verification, then choose your zip.
Not an option
gr8nole said:
When you select Install zip in CWM, select Toggle signature Verification, then choose your zip.
Click to expand...
Click to collapse
Thank you for the timely response. Unfortunately I just noticed in the background in CWM that my droid man has a red triangle with ! point inside him. The options given to me are as follows...
Reboot system now
Apply update from ADB
Apply uopdate from Ext. Storage
Wipe data/factory reset
Wipe cache partition
Apply update from cache
Which of these options should I use if any and or should I flash CWM again on Odin in order to get the screen you are speaking about?
If I do need to flash again what are the correct steps to clear what CWM is already in place? Thank you again for all of your help. I am a noob that rooted my SIII a while back and obviously it is a little different with the Tab 7.0.
PMK19 said:
Thank you for the timely response. Unfortunately I just noticed in the background in CWM that my droid man has a red triangle with ! point inside him. The options given to me are as follows...
Reboot system now
Apply update from ADB
Apply uopdate from Ext. Storage
Wipe data/factory reset
Wipe cache partition
Apply update from cache
Which of these options should I use if any and or should I flash CWM again on Odin in order to get the screen you are speaking about?
If I do need to flash again what are the correct steps to clear what CWM is already in place? Thank you again for all of your help. I am a noob that rooted my SIII a while back and obviously it is a little different with the Tab 7.0.
Click to expand...
Click to collapse
Just try flashing CWM again and uncheck auto reboot in Odin.
gr8nole said:
Just try flashing CWM again and uncheck auto reboot in Odin.
Click to expand...
Click to collapse
Ok I did that and got a pass on Odin. Now my screen is still in Odin mode with a green droid in the middle and under that it says in white letters Downloading....Under that it says Do not turn off target!! in green letters. How do I properly restart? In CWM as normal? (Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen). Thanks...
PMK19 said:
Ok I did that and got a pass on Odin. Now my screen is still in Odin mode with a green droid in the middle and under that it says in white letters Downloading....Under that it says Do not turn off target!! in green letters. How do I properly restart? In CWM as normal? (Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen). Thanks...
Click to expand...
Click to collapse
Update...Just re read this
--Auto Reboot can be un-checked if CWM doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).
Trying now fingers crossed!!!
PMK19 said:
Update...Just re read this
--Auto Reboot can be un-checked if CWM doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).
Trying now fingers crossed!!!
Click to expand...
Click to collapse
Update....ROOTED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:good: Thanks for all of your help as well as the rest of the build team.

Help! N7 stucked at loading screen while attempting to root

Hi all,
I tried to root my Nexus 7 according to this youtube link
http://www.youtube.com/watch?v=X1cD-JXRGX8
During the step to install" super SU", i copied the the "unzipped" version of the file into the device, and couldn't install it as per video.
So i tried restating the device to try to copy the right file to the device, but now it just stucked at the loading screen (circle & square alternating, not the X screen) and i couldn't power it off too.
What should i do? Help please! Thanks!
gooner4life said:
Hi all,
I tried to root my Nexus 7 according to this youtube link
http://www.youtube.com/watch?v=X1cD-JXRGX8
During the step to install" super SU", i copied the the "unzipped" version of the file into the device, and couldn't install it as per video.
So i tried restating the device to try to copy the right file to the device, but now it just stucked at the loading screen (circle & square alternating, not the X screen) and i couldn't power it off too.
What should i do? Help please! Thanks!
Click to expand...
Click to collapse
Is it still recognised by the computer?
As in, if you plug it in with USB does it appear on your device manager?
Anyway, I would recommend using Wug's Toolkit (http://forum.xda-developers.com/showthread.php?t=2389107) to sort you out.
It's pretty straight forward so you should be able to fix it easly.
username4this said:
Is it still recognised by the computer?
As in, if you plug it in with USB does it appear on your device manager?
Anyway, I would recommend using Wug's Toolkit (http://forum.xda-developers.com/showthread.php?t=2389107) to sort you out.
It's pretty straight forward so you should be able to fix it easly.
Click to expand...
Click to collapse
No it's not recognized by my PC too. So the toolkit won't be useful too i presume?
Any other options? Just wait it out till the battery is dead?
gooner4life said:
No it's not recognized by my PC too. So the toolkit won't be useful too i presume?
Any other options? Just wait it out till the battery is dead?
Click to expand...
Click to collapse
Your best bet is to try them.
Also give a look here:
http://forum.xda-developers.com/showthread.php?t=2544361
gooner4life said:
Hi all,
I tried to root my Nexus 7 according to this youtube link
http://www.youtube.com/watch?v=X1cD-JXRGX8
During the step to install" super SU", i copied the the "unzipped" version of the file into the device, and couldn't install it as per video.
So i tried restating the device to try to copy the right file to the device, but now it just stucked at the loading screen (circle & square alternating, not the X screen) and i couldn't power it off too.
What should i do? Help please! Thanks!
Click to expand...
Click to collapse
Long press the power button and that will make it reboot, as soon as the screen turns OFF, hold down the volume down button and it will boot into the bootloader, use the volume button to select recovery, press the start button to go into recovery. In recovery (TWRP) click on wipe then do a factory reset. If it is off, press and hold volume down and power button together and that will get you to the bootloader screen.
wantabe said:
Long press the power button and that will make it reboot, as soon as the screen turns OFF, hold down the volume down button and it will boot into the bootloader, use the volume button to select recovery, press the start button to go into recovery. In recovery (TWRP) click on wipe then do a factory reset. If it is off, press and hold volume down and power button together and that will get you to the bootloader screen.
Click to expand...
Click to collapse
This whole rooting process confuse me. So you're saying after doing this, just start over the rooting process as per youtube link again or continue the step where i did wrong?
P/S is it easier to root using that rootkit as per post above?
gooner4life said:
This whole rooting process confuse me. So you're saying after doing this, just start over the rooting process as per youtube link again or continue the step where i did wrong?
Click to expand...
Click to collapse
You're two thirds of the way there. You supposedly have the bootloader unlocked, you can see that when it boots up at the "Google" screen the lock will be unlocked, It will also say unlocked in the bootloader screen. And you should have TWRP installed if you tried to flash supersu. So.. at this point, you need to flash the supersu "zip" in TWRP. Before you start making any changes I would recommend making a backup in TWRP.
gooner4life said:
P/S is it easier to root using that rootkit as per post above?
Click to expand...
Click to collapse
What you are using is part of the android sdk (adb/fastboot), the platform-tools folder with the usb drivers moved into it, not really a toolkit. I've never used a toolkit so I can't say a lot about them, I have the complete sdk installed, you were using part of it. Were you able to boot into recovery and do a factory reset?
You should not have followed that guide.
1st: Go to here: http://forum.xda-developers.com/showthread.php?t=1538053. Download the zip. DO NOT UNZIP.
2nd: Make sure that ADB is set up on your computer. To download, go to https://developer.android.com/sdk/index.html. Follow the instructions to install. Open the SDK (should be in C\development\adt-bundle-windows-x86_64-20131030\, or whereever you installed, it is an execultable file. It should have a little green android logo next to it, and it is called "SDK Manager". It will take a couple seconds to open. Once it has opened, install "Android SDK Platform-tools".
3rd: Move the Super SU zip into the C\development\adt-bundle-windows-x86_64-20131030\sdk\platform-tools, or wherever you installed the platform-tools. It should be inside the SDK folder. Just paste the zip there.
4th: Boot your Nexus 7 into recovery. Push and hold the power button and volume down button at the same time and boot into the bootloader.
5th: Boot into recovery. Do so by pressing the power button for a while, and eventually it will shut off, as mentioned above.
6th: Press and hold power button and volume down to boot into bootloader. Once in the bootloader, push the volume down button until recovery is selected.
7th: Boot into recovery by pressing the power button.
8th: In recovery, wipe the cache and dalvik under the advanced wipe in the wipe menu. Go back and click install. Click "apply from sideload", or something like that, I forgot the exact wording. Connect your tablet to your computer through a USB cable.
9th: Go back to your computer. Go to C\development\adt-bundle-windows-x86_64-20131030\sdk\ or wherever you installed the sdk. Press shift, and then right click on the folder that says "platform-tools". In the menu, click "open command window here".
10th: Copy the exact name of the supersu zip file in the platform-tools folder.
11th: In the command window type: adb sideload UPDATE-SuperSU-v1.86.zip
12th: Press enter. The name of the super su file may not be exactly that, but similar to it.
13: Reboot your tablet.
I don't know if you are a noob, or very experienced, so I made this as noob-friendly as posisble, sorry if I offended you in any way. Here are some pictures.
I did manage to boot into bootloader screen 7 the option to start, but same thing happen, it still stucked at the "4 colors" circle screen. Problem is guys i couldn't get the PC to recognise my tablet even in the bootloader screen. What should i do now?
wantabe said:
You're two thirds of the way there. You supposedly have the bootloader unlocked, you can see that when it boots up at the "Google" screen the lock will be unlocked, It will also say unlocked in the bootloader screen. And you should have TWRP installed if you tried to flash supersu. So.. at this point, you need to flash the supersu "zip" in TWRP. Before you start making any changes I would recommend making a backup in TWRP.
What you are using is part of the android sdk (adb/fastboot), the platform-tools folder with the usb drivers moved into it, not really a toolkit. I've never used a toolkit so I can't say a lot about them, I have the complete sdk installed, you were using part of it. Were you able to boot into recovery and do a factory reset?
Click to expand...
Click to collapse
Ok i can boot to recovery mode and get to TWRP. But as my post above the superSU is not in zipped form, what should i do then? And i couldn't copy the zipped verison into the tablet as my PC won't recognise the tablet. Do i choose wipe to start all over again from scratch? (assuming that's what wipe will do?) or browse into subfolder of superSU "i.e. app, bin, etc, xbi" and install form there manually? Dam im confused without knowing any basic of rooting...I thnk you're the closest to understanding where i am now, please help! Thanks!
ok guys i think my N7 got some serious problem!!
Now it would just stucked on the Google screen and won't even go to the recovery mode!!!
What should i do now to reset it back to original state now?!!
gooner4life said:
Ok i can boot to recovery mode and get to TWRP. But as my post above the superSU is not in zipped form, what should i do then? And i couldn't copy the zipped verison into the tablet as my PC won't recognise the tablet. Do i choose wipe to start all over again from scratch? (assuming that's what wipe will do?) or browse into subfolder of superSU "i.e. app, bin, etc, xbi" and install form there manually? Dam im confused without knowing any basic of rooting...I thnk you're the closest to understanding where i am now, please help! Thanks!
Click to expand...
Click to collapse
Try and do a factory reset. Just remember a factory reset is not a restore and it will not put your device back to the way it was before you tried to root. A factory reset will wipe the cache and data, not the system. Any changes to the system, kernel or recovery that you made will still be there after a factory reset. Go ahead and dot a reset and let's see if that will get your N7 to boot up. And we can go from there.
wantabe said:
Try and do a factory reset. Just remember a factory reset is not a restore and it will not put your device back to the way it was before you tried to root. A factory reset will wipe the cache and data, not the system. Any changes to the system, kernel or recovery that you made will still be there after a factory reset. Go ahead and dot a reset and let's see if that will get your N7 to boot up. And we can go from there.
Click to expand...
Click to collapse
I might have stuffed up here mate, you might have missed my last post. I did a factory wipe, and tried to use the toolkit as suggested, and i'm now im deeper water where i can't even get into recovery mode. Everything just stucked between the "Google" screen and the "volume down + power" screen....gosh i really feel stupid now...Any more suggestions?
gooner4life said:
I might have stuffed up here mate, you might have missed my last post. I did a factory wipe, and tried to use the toolkit as suggested, and i'm now im deeper water where i can't even get into recovery mode. Everything just stucked between the "Google" screen and the "volume down + power" screen....gosh i really feel stupid now...Any more suggestions?
Click to expand...
Click to collapse
I did miss your last post. Holy crap what are you doing? You went from knee deep to drowning.
---------- Post added at 04:17 AM ---------- Previous post was at 04:16 AM ----------
What you're saying is that you can't get to the bootloader screen now?
wantabe said:
I did miss your last post. Holy crap what are you doing? You went from knee deep to drowning.
---------- Post added at 04:17 AM ---------- Previous post was at 04:16 AM ----------
What you're saying is that you can't get to the bootloader screen now?
Click to expand...
Click to collapse
Yep I'm serious **** now! Any more experts here have any idea? Or do i have to bring it to local mobile shop to get it fixed? Is Google able to help ?
Anyway... getting supersu installed is a non-issue if you can't get it to boot up. When you were trying to download supersu what you were looking for was the installable zip at Chainfires thread."CWM / TWRP / MobileODIN installable ZIP: http://download.chainfire.eu/supersu."
wantabe said:
Anyway... getting supersu installed is a non-issue if you can't get it to boot up. When you were trying to download supersu what you were looking for was the installable zip at Chainfires thread."CWM / TWRP / MobileODIN installable ZIP: http://download.chainfire.eu/supersu."
Click to expand...
Click to collapse
Nah i was just using the SuperSU zip i downloaded as per youtube link. The problem is my PC cant detect my tablet and i can't do sh**t!
Any manual hardware reset option on N7?
If a factory reset didn't clear it up you might be able to get away with just flashing the system image. Long pressing won't make it reboot?
I'll tell you how the tablet is right now, and hopefully you have some ideas where to go from here.
Atm, when i turn on and off the tablet.
but when i turn it on, it will go straight to the google screen with lock image at the bottom, then it will just stuck there
I tried going to recovery mode, and it won't come up with TWRP , and after a black screen, it will go back to boot screen
Tried "restart bootloader", did nothing too, just gone back original boot screen .
So now what? Gosh did i just break my brand new N7?
I'll tell you how my tablet is right now, and hopefully you have some ideas where to go from here.
ATM, I can turn on and off the tablet., but my PC won't recognise it
However, when i turn it on, it will go straight to the 'Google" screen with lock image at the bottom, then it will just stuck there
I tried going to recovery mode, and it won't come up with TWRP as before, and after a black screen, it will go back to boot screen
Tried "restart bootloader", did nothing too, just gone back original boot screen .
So now what? Gosh did i just break my brand new N7? :crying:

Categories

Resources