Develop Bugs

[Q] galaxy wonder DEAD??after swapper2 install

i need your help please , I tried to apply swap partition on my device hoping would give me extra ram. with mini tools partition i used 2 gb for linux swap partition (i have 32 gb class 4 sd card ) ,downloaded and installed swapper2 , run it and checking many options according to this tuto http://forum.xda-developers.com/showthread.php?t=1659231
I turned off my phone, and when i tried to turn it on , nothing happened :crying: my phone was DEAD !!!!!!! or almost , no charging sign (pc or ac adapter),no recovery mode , no download mode, the only signe of life is the QHSUSB_DLOAD driver missin message when i connect it to pc
it seems that im not the only one having this probleme , but i cant find any solution while searching during two hard days , so please , if anyone of you can help , dont hesitate , thank you .
i will wait for your answers with impatience.

anyone can help ?
please , im waiting , anyone who had this probleme before ?

try taking a shot with another device for wt the phone shows you, make sure that ur memory card is inside ur phone before turning it on. try again to check if u can get to recovery or download modes while ur memory card is in ur phone. im a noob so i can't help much but maybe we can figure it out together

Did you tried to turn on your phone without sd card and SIM card?

mosta_9741 said:
try taking a shot with another device for wt the phone shows you, make sure that ur memory card is inside ur phone before turning it on. try again to check if u can get to recovery or download modes while ur memory card is in ur phone. im a noob so i can't help much but maybe we can figure it out together
Click to expand...
Click to collapse
thank you , ive tried a lots of manip with/without sim ; sd card ; even battery while coonecting the device ton pc , but nothing happen except , when i try to get into recovery or download mode , after about 10 seconds of pressing the bouttons , its like the phone is detected and the QHSUSB_DLOAD missing driver message appears again !! thats all

ok let's try to find the file of that driver, which rom wr u using ??

don't mean to be a bearer of bad news, but your phone is hard bricked. Meaning no software will get you out of that. The driver you mentioned is the universal, you screwed something up driver. Youll need JTAG repair
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

MiguelPT said:
Did you tried to turn on your phone without sd card and SIM card?
Click to expand...
Click to collapse
thank you , ive tried a lots of manip with/without sim ; sd card ; even battery while coonecting the device ton pc , but nothing happen except , when i try to get into recovery or download mode , after about 10 seconds of pressing the bouttons , its like the phone is detected and the QHSUSB_DLOAD missing driver message appears again !! thats all

DAMASTAH ,yes , iam aware of that but i still hope finding a software solution , thanks

mosta_9741 said:
ok let's try to find the file of that driver, which rom wr u using ??
Click to expand...
Click to collapse
i use this rom http://forum.xda-developers.com/showthread.php?t=1673875

if ur still in warranty then the easiest way is to let samsung fix it for u

My point is there there isn't a software solution . Your phone won't boot into anything. that's why software isn't a solution. You need JTag. a usb jig MAY solve it, but that's the only option short of JTag
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

mosta_9741 said:
if ur still in warranty then the easiest way is to let samsung fix it for u
Click to expand...
Click to collapse
i have not warranty because i live in TUNISIA and i bought the phone from a person who lives in europe , there is a samsung service in my country but if i take the phone to them , im sure it will cost me a fortune , so i have to find a solution by myself .
damastah said:
My point is there there isn't a software solution . Your phone won't boot into anything. that's why software isn't a solution. You need JTag. a usb jig MAY solve it, but that's the only option short of JTag
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
i see what do you mean , but if we think a little , the phone is not completly dead until my pc detect it as qhsusb-dload ! and im sure tha a software solution does exist (beside te jtag) using linux (ubuntu) ? QPST ? heimdall ?

passager2010 said:
i have not warranty because i live in TUNISIA and i bought the phone from a person who lives in europe , there is a samsung service in my country but if i take the phone to them , im sure it will cost me a fortune , so i have to find a solution by myself .
i see what do you mean , but if we think a little , the phone is not completly dead until my pc detect it as qhsusb-dload ! and im sure tha a software solution does exist (beside te jtag) using linux (ubuntu) ? QPST ? heimdall ?
Click to expand...
Click to collapse
you can try another way beside jtag without using any software..
1. pull out the battery
2. plug the charger/usb charge on pc/laptop
3. hold the vol. down-menu-power(same thing like you do to get to download menu)
4. while you hold those three buttons put the battery again (make sure that you still hold those three buttons)
5. after you put in the battery, download menu will show up (now you can use odin to install which stock rom you like)
gudluck buddy..
Sent from xda app

passager2010 said:
i have not warranty because i live in TUNISIA and i bought the phone from a person who lives in europe , there is a samsung service in my country but if i take the phone to them , im sure it will cost me a fortune , so i have to find a solution by myself .
i see what do you mean , but if we think a little , the phone is not completly dead until my pc detect it as qhsusb-dload ! and im sure tha a software solution does exist (beside te jtag) using linux (ubuntu) ? QPST ? heimdall ?
Click to expand...
Click to collapse
im in the business of unbricking phones. QPST has nothing to do with the phone's operating system. Heimdall needs your phone to be partly functional ( download mode) . Odin, same thing. Have you found any drivers yet? You need drivers to talk to your phone at all.

stpdkid said:
you can try another way beside jtag without using any software..
1. pull out the battery
2. plug the charger/usb charge on pc/laptop
3. hold the vol. down-menu-power(same thing like you do to get to download menu)
4. while you hold those three buttons put the battery again (make sure that you still hold those three buttons)
5. after you put in the battery, download menu will show up (now you can use odin to install which stock rom you like)
gudluck buddy..
Sent from xda app
Click to expand...
Click to collapse
i have seen a video on youtube explaining this manip , and i have try it with no success but , the good news , i have my phone bach to life with JTAG , thanks .
damastah said:
im in the business of unbricking phones. QPST has nothing to do with the phone's operating system. Heimdall needs your phone to be partly functional ( download mode) . Odin, same thing. Have you found any drivers yet? You need drivers to talk to your phone at all.
Click to expand...
Click to collapse
i took the phone to a phone store where they repair a multitude of phones , i found what i look for when i spook to the technicien there, after a while , i returned to the store and found my phone back to life and im very happy , so let me say this , thank you all of you xda members , if this forum does not exist , i will never figure out the solution :good:

Galaxy gio problem

Hi guys
I do not know what made ​​the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:

putpuda said:
Hi guys
I do not know what made ​​the kid from a cell phone, but I have a problem does not turn on, nor download mode or recovery only black obrazovka.V Odin I get, but I end up at connection setup, usb jig also nothing one click unbrick nothing too please thanks for your help everyone , sorry for my English:crying::crying::crying:
Click to expand...
Click to collapse
U hardbricked it. U'll have to take it to service centre and tell them a lie tht u upgraded with kies and this happen. dont mention about root,custom rom nothing which makes ur warranty invaild

Does anyone have a better solution?

how to fix hard brick samsung w

my phone can't be on..
i already try many way such as remove the ext card, remove the battery for 30 minute..
but, it is still the same..
the phone is shown nothing..
can someone help me..
my phone was rooted..
for sure there is no warranty if im sent it to samsung centre..

Why you so confused?
Just go to SSC and said "I don't know why after I update this phone using Samsung Kies (of course I follow the steps) but my phone suddenly dead! *for more reason make it by your self*
Sent from my GT-I8150 using xda premium

tomCAD77 said:
my phone can't be on..
i already try many way such as remove the ext card, remove the battery for 30 minute..
but, it is still the same..
the phone is shown nothing..
can someone help me..
my phone was rooted..
for sure there is no warranty if im sent it to samsung centre..
Click to expand...
Click to collapse
You need usb jig for flash maybe you can search from youtube for unbrick

gwonder said:
You need usb jig for flash maybe you can search from youtube for unbrick
Click to expand...
Click to collapse
I think USB jig just for clear counter *I'm forget it*.
Best solution is RIFF Jtag :banghead:
Sent from my GT-I8150 using xda premium

hard brick?means cant enter into download or recovery mode?

using riff jtag.
because the boot loader dies,,

[Q] T-Mobile S2 T989 - hardbricked / can jtag fix it?

I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!

Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on

Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:

Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?

sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.

Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess

sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though

I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....

The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.

Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir

sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?

sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...

[Q] Bricked Galaxy W (What I did, What I get)

Dear Friends,
I bricked my Galaxy W. Here is the bricking procedure.
- I reset my phone with original loader and converted into original factory state.
- Than with this clean phone, I rooted it by help of this guide
It was successful. Thanks for that guide.
- Than from google play, I loaded terminal emulator and tried to load recovery-clockwork-6.0.4.5-ancora
- Rebooted my phone and surprise: My phone is dead.
What I get:
- My phone is completely unbootable.
- No key combination is working
- Completely blank screen without any indication.
- But my PC recognizes my phone as QHSUSB_DLOAD
It seems that Qualcomm High Speed USB driver fits this thing and shows COM5.
- But ODIN does not see anything.
What I need:
- HELP!
Thanks

nemli said:
Dear Friends,
I bricked my Galaxy W. Here is the bricking procedure.
- I reset my phone with original loader and converted into original factory state.
- Than with this clean phone, I rooted it by help of this guide
It was successful. Thanks for that guide.
- Than from google play, I loaded terminal emulator and tried to load recovery-clockwork-6.0.4.5-ancora
- Rebooted my phone and surprise: My phone is dead.
What I get:
- My phone is completely unbootable.
- No key combination is working
- Completely blank screen without any indication.
- But my PC recognizes my phone as QHSUSB_DLOAD
It seems that Qualcomm High Speed USB driver fits this thing and shows COM5.
- But ODIN does not see anything.
What I need:
- HELP!
Thanks
Click to expand...
Click to collapse
Are you sure that you are not able to go download mode by key combination.
Sent from my Xperia Neo V using xda app-developers app. Hit thanks if it helped
Donate me if you can

sujithar37 said:
Are you sure that you are not able to go download mode by key combination.
Sent from my Xperia Neo V using xda app-developers app. Hit thanks if it helped
Donate me if you can
Click to expand...
Click to collapse
I can not see anything in my phone screen, therefore I can't be sure. But since I can not see any action in PC too I may say; I'm not able to go to download mode.
(I'm not expert on this subject, I always have doubt what I talked about, sorry for that)
However as I say in my first message Qualcomm High Speed driver is always in charge as the phone plugged.

nemli said:
I can not see anything in my phone screen, therefore I can't be sure. But since I can not see any action in PC too I may say; I'm not able to go to download mode.
(I'm not expert on this subject, I always have doubt what I talked about, sorry for that)
However as I say in my first message Qualcomm High Speed driver is always in charge as the phone plugged.
Click to expand...
Click to collapse
Please refer below the link, may be that would help you
http://forum.xda-developers.com/showthread.php?t=1853385
http://forum.xda-developers.com/showthread.php?t=1551016
The only way you can get back from this situation that is you have to enter download mode and flash stock firmware. Your issue will be resolved after that. Make sure you installed Samsung USB drivers into your pc. If this doesn't help then you may contact service center.
Sent from my Xperia Neo V using xda app-developers app. Hit thanks if it helped
Donate me if you can

sujithar37 said:
Please refer below the link, may be that would help you
http://forum.xda-developers.com/showthread.php?t=1853385
http://forum.xda-developers.com/showthread.php?t=1551016
The only way you can get back from this situation that is you have to enter download mode and flash stock firmware. Your issue will be resolved after that. Make sure you installed Samsung USB drivers into your pc. If this doesn't help then you may contact service center.
Sent from my Xperia Neo V using xda app-developers app. Hit thanks if it helped
Donate me if you can
Click to expand...
Click to collapse
Thanks for your valuable responses. I will try what is recommended in those two links, and of course will give the feedback to here to help the (potential) brickers.

full brick
Hello to all,
I have tried to enter with some different key combination, not worked.
I have tried USB-JIG, not worked.
Does anybody have an idea to go with QHSUSB drivers?
Because only with this, my computer recognizes my bricked phone.
Thanks

nemli said:
Hello to all,
I have tried to enter with some different key combination, not worked.
I have tried USB-JIG, not worked.
Does anybody have an idea to go with QHSUSB drivers?
Because only with this, my computer recognizes my bricked phone.
Thanks
Click to expand...
Click to collapse
same problem as me
usb does not recognize my phone
if u find a solution contact me please

Solved by JTAG
Dear friends,
I have tried all the procedures without touching phone PCB. Non of them worked.
I have decided to apply JTAG procedure. Actually this procedure is a little bit complicated for me. I have found a guy making this. And in a very short time, my phone returned back to life.
Now it is working with a Cyanogenmod release (based on Android 4.2.2.)
I have some issues but anyway, my phone is working now with better system performance.
JTAG saved my phone.

nemli said:
Dear friends,
I have tried all the procedures without touching phone PCB. Non of them worked.
I have decided to apply JTAG procedure. Actually this procedure is a little bit complicated for me. I have found a guy making this. And in a very short time, my phone returned back to life.
Now it is working with a Cyanogenmod release (based on Android 4.2.2.)
I have some issues but anyway, my phone is working now with better system performance.
JTAG saved my phone.
Click to expand...
Click to collapse
How much did he charge you for the JTAG? I am looking to JTAG few phones

MayB4ck said:
How much did he charge you for the JTAG? I am looking to JTAG few phones
Click to expand...
Click to collapse
Nearly 20€ per JTAG.

If someone need QHSUSB_DLOAD solution...
Maybe I can help him...
You need Qualcomm Drivers... forgotten which one exactly I have used...
QPST Version Build 411
http://forum.xda-developers.com/showpost.php?p=50204328&postcount=9
Procedure looks similar to this:
forum.xda-developers.com/attachment.php?attachmentid=2754655&d=1400627472
In this Thread I have tried many things...
http://forum.xda-developers.com/showpost.php?p=52808706&postcount=282
I could prepare files for testing for I8150...
Not tested by me nor confirmed with I8150... as only S8600 for me available...
If someony want test... PM me.
Next few hours or days I could upload files for QPST...
Code:
MBR from I8150
DBL from I8150
OSBL from I8150
Need testers and feedback please.
Best Regards

Will check my HD for Qualcomm drivers...
Maybe upload later...
Here are test files... because untested...
Risk to reach other bad status... So you could need JTAG...
Short description...
DBL and OSBL are taken from JTAG dump...
It seems chinese Version could be different...
But MBR... first 512 Bytes are 1:1 same in all I8150 JTAG dumps I have on my HD...
partition.mbn is MBR from I8150... 512 Byte
DBL and OSBL have size from partition... extracted from JTAG dump...
DBL is in partition 2
OSBL in partition 3...
Settings for QPST are hopefully visible in Screenshot...
It is mandatory to use QPST Build 411... older Versions not accept MBR as partition.mbn without header...
Header in MBR not deadly but could be bring other trouble...
For testing now only correct drivers "missing"...
I have so many stuff downloaded...
Will try to find correct one.
Again, I have only S8600 for test...
Maybe with I8150 not possible...
But before you buy JTAG you can try.
Good luck.
Best Regards
Edit 1.
Qualcomm driver to find should be not impossible... use magic search word: QHSUSB_DLOAD... for instance here:
http://forum.xda-developers.com/showpost.php?p=40072841&postcount=1
or try this one:
http://forum.xda-developers.com/showpost.php?p=40195799&postcount=7
And here again Link for working confirmed QPST Version Build 411... tested successfully by me with S8600:
http://forum.xda-developers.com/showpost.php?p=50204328&postcount=9