Develop Bugs

How to root T889 +Counter reset + Unroot+ Stock firmware

Rooting Indtruction
SINCE SUPERSU.ZIP DOES NOT WORK ON ALL DEVIVES THE BEST OPTION TO ROOT RIGHT NOW :
1ST: ROOT BY OPTION 2
2ND : FLASH CUSTOM CWM VIA PC ODIN OR MOBILE ODIN ( PLAY STORE )
Option 1: CWM + SuperSU .
1. download cwm6-recovery-n7100-121014.tar : http://www.mediafire.com/?mouxvj4og7azcow
OR Download cwm recovery V6.0.2.5 .tar: http://www.mediafire.com/?oyv15gidjxd6c23 . Big thank to Dr.Ketan&KoushThis CWM will not support EXFAT Card
2.download CWM SUPERSU V0.99 installable ZIP: I took off download link until further notice. From Chainfire " SUPERSU. ZIP does not work on all devices, needs fix. Note that if you are already rooted, installing through Market is by far the easiest way to install SuperSU !". More infor here http://forum.xda-developers.com/showthread.php?t=1538053
3.Download PC Odin : http://d-h.st/SdH
4.Open Odin and select PDA tab
5.Point to extracted file cwm6-recovery-n7100-121014.tar
6.Now switch off device and reboot in download modeby:
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
7.Connect device to PC and wait till device successfully added to com port (it will turn light blue)
8.Hit ‘Start’ to flash
9.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
10.Now reboot into CWM by :Switch off device and press Vol Up + Home +Power hold about 5 second
11.Install SuperSu.
12.Reboot.Done
Option 2 : Only Root
Download this CF Auto Root from here http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-gtn7100.zip
and extract it to .tar
Procedure :
1.Open Odin and select PDA tab
2.Point to extracted file CF-Auto-Root-SGN2.tar
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Reboot device and you will have superSU in application drawer.
Option 3 : Root with Exynos Abuse Apk
3.Root with apk No counter reset needs, Easiest - Credit goes to Chainfire, alephzain
1.Download latest from chainfire's here http://forum.xda-developers.com/showpost.php?p=35512626&postcount=1
2.Install application as routine apk installation and open it.
3.Open Exynos Abuse application from App drawer
4. Select Root Device
6.Now your device is rooted, for security purpose you can disable Exploit.
( Note : This may break camera, but unchecking disable exploit make it working again )
7. Open SuperSU & Update binary.
How to unroot Exploit :
Open Exynos Abuse app, uncheck disable explot & Disable Exploit on boot then select Unroot device
Restart device and wait for 10 min. and then you can check status.
Since Chainfire support our note now . if you want reset counter for warranty then download TRIANGLE AWAY from play store which will do the job.Still dont know what is it, go here for more infor http://forum.xda-developers.com/showthread.php?t=1494114.
If you want to unroot for some reason :
From stock rom and root by Chainfire method all you need to do : Triangle Away app ,SuperSU / setting/ full unroot. Reboot into Recovery / Factory reset.
From custom rom : reflash stock image via Odin .reroot by CF auto root,reset counter with Triangle Away App,SuperSU/Setting/Full unroot . Recovery / Factory reset.
Can find stock firmware from here http://www.sammobile.com/firmware/ search for T889
Stock T889UVALJ1 & T889UVALK8 (Post 51) http://forum.xda-developers.com/showthread.php?t=1969551 ( Thank , TeshXX)
Stock + root http://forum.xda-developers.com/showthread.php?t=1975560 ( Thank , Mr.Robinson )
How to flash rom via Odin :
Make sure you have installed Kies OR Samsung USB driver
Open up the ODIN
1. Enable the check mark by click on the following options(default Option)
- Auto Reboot, and F. Reset Time
- Download TAR ROM
- Check PDA, and point to TAR ROM file
2. Now switch off device and Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Home Key and
Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.
3. Connect the device to PC via Data Cable.
Make sure that the one of communication port [ID:COM] box is highlighted in
light blue. The device is now connected with the PC and ready to download the
binary file into the device.
4. Start downloading binary file into the device by clicking Start Button on the screen.
the green colored "PASS!" sign will appear on the upper-left box if the binary file
has been successfully downloaded into the device.
5. Disconnect the device from the Data cable.
6.Done
Common question about reseting counter
I have reset counter but system status still 'custom'
You should have stock recovery (Opton 2)
If you already have stock recovery(CF Auto root) then reset counter first
then wipe cache + wipe data(factory reset) + re wipe cache
You should now have system status 'official'
I have rest counter but after reboot again it goes to 1
This happen if you have rooted with CUSTOM RECOVERY(Opton 1)
This is neither error of recovery nor triangle away. This happens due to new bootloader which have auto checksum for recovery, when you reboot to custom recovery count will raise.
To prevent this you need to have play version of Triangle away, and you should check (enable) 'Auto reset at boot'. Again this feature depends on kernel/recovery is supported or no
How to Backup EFS : http://forum.xda-developers.com/showthread.php?t=1922473
Flash tool for Linux user : http://forum.xda-developers.com/showthread.php?p=33074572
Special thank to Dr.Ketan , Chainfire , Chenlu ,Koush, Alephzain , Mr.Robinson , TeshXX.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you think my post was useful please hit thank consider like small donation.

Awesome, thanks for the info, getting mine this weekend!!
Where did you buy yours? TMO or wirefly??

your links are not working.

That my dear children, is not how you do copy paste.
the files are:
cwm6
https://hotfile.com/dl/176065007/332cffb/cwm6-recovery-n7100-121014.tar.html
and
CWM SUPERSU installable ZIP
http://forum.xda-developers.com/showthread.php?t=1538053

iamfightaa said:
your links are not working.
Click to expand...
Click to collapse
reupload.

B.Jay said:
"How to root" and similar threads do NOT belong into the Development boards!
Moved into General.
Next time watch where you post.
Thank you.
Click to expand...
Click to collapse
my bad.

simplelife said:
I had very easy method to flash which i did try by myself and work perfect with T889:
1. download cwm6-recovery-n7100-121014.tar : http://www.mediafire.com/?mouxvj4og7azcow
2.download CWM SUPERSU installable ZIP:http://www.mediafire.com/?w3i20sr6r58r8ah ( copy this file into your EXcard )
3.Download PC Odin : http://d-h.st/6Er
4.1.Open Odin and select PDA tab
2.Point to extracted file cwm6-recovery-n7100-121014.tar
3.Now switch off device and reboot in download modeby:
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Now reboot into CWM by :Switch off device and press Vol Up + Home +Power hold about 5 second
8.Install SuperSu.
9.Reboot.Done
Take about 5 min to do.Special thank to Dr.Ketan , Chainfire , Chenlu..
Click to expand...
Click to collapse
This method works 100%..I did it last night.
Sent from my SGH-T889 using Tapatalk 2

B.Jay said:
"How to root" and similar threads do NOT belong into the Development boards!
Moved into General.
Next time watch where you post.
Thank you.
Click to expand...
Click to collapse
Weird, I guess the development forums for 150 other phones must be wrong then. Their moderators must be slacking.
p.s.-no root, no development.
p.s.s-you must be a toolkit user

lowandbehold said:
Weird, I guess the development forums for 150 other phones must be wrong then. Their moderators must be slacking.
p.s.-no root, no development.
p.s.s-you must be a toolkit user
Click to expand...
Click to collapse
Yeah, the reason I put my thread in origin dev because i seen every forum do the same ,all I do is try to help but I guest moderator want to keep dev thread at NEVER so let it be. Toolkit is good but complicated if you choose wrong option then will be problem thats why I come up with this solution which easy to root and with out any issue .

jshaw06 said:
This method works 100%..I did it last night.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I glad someone confirm work

Can also confirm it works and please thank the OP for posting "How to" ... This however does not belong in Development, How to belong in General.. Thanks Mod for not slacking..

ellac49 said:
Can also confirm it works and please thank the OP for posting "How to" ... This however does not belong in Development, How to belong in General.. Thanks Mod for not slacking..
Click to expand...
Click to collapse
Yes, you are right! It belongs in the general section and not stickied in the dev section (like every other phone) so it can get lost on page 8 and more people **** up their phone.
Seriously. Go in the dev section of 20 different phones and tell me what percentage have a root method stickied right at the top.

I also was able to root my phone with this method.

Back to Stock?
Hi,
Are we able to bring it back to stock just in case?
Thanks

CLopez92868 said:
Hi,
Are we able to bring it back to stock just in case?
Thanks
Click to expand...
Click to collapse
should be in matter of time

The zip root. This only installs cwm recovery still need a rooted rom.
Sent from my SGH-T889 using xda premium

confirming that this method worked on my Note 2. :good:
this should be stickied.

tuffCookie said:
confirming that this method worked on my Note 2. :good:
this should be stickied.
Click to expand...
Click to collapse
Did the SU zip work for u?
Sent from my SGH-T889 using xda premium

VIIRU§ said:
Did the SU zip work for u?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
yup

tuffCookie said:
yup
Click to expand...
Click to collapse
Can u link me the zip your using cause I flashed and it went thru but just didnt give me root. But I do have a custom recovery.
Sent from my SGH-T889 using xda premium

please help fast

i wanted to put the CM10 rom on my xperia arc. so first i unlocked the bootloader.
so now i fastbooted it with the thing u need to write "fastboot flash boot boot.img" and it worked. it wrote "flash operation completed" and then "finished"
now when i try to open the phone it does a little vibarate like allwayes when i open the phone but it doesnt open !!
is it maybe because i downloaded a bad version of the cm10 boot?
plz help !!

help plzzsomeone !!

Hey,sometimes it takes several minutes to turn on completly.so my guess is that you didnt wait long enouf after rom install.
reboot and wait few minutes.
Peace
Sent from my GT-N7100 using xda app-developers app

Odp: please help fast
Did you flash the zip file of the ROM in CWM? Because you wrote only about flashing kernel.
Sent from my LT15i using xda app-developers app

michel_666 said:
Did you flash the zip file of the ROM in CWM? Because you wrote only about flashing kernel.
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
first i got into flashmode with flashtool because i had problem to do it alone. i downaloded from here : uploaded. n e t /file/5a0kokcr/from/wyv4cf (take down spaces. i couldnt post without because i dont have 10 posts so it says i cant post links.)
then i moved the boot.img to the fastboot folder. i clicked SHIFT+RIGHT CLICK and got in to the cmd command thing. i wrote there "fastboot flash boot boot.img"
and thats it. i opened my phone and it just vibarte like its opening but nothing happens. phone not turning on.
thats all i did. what did i do wrong? is it the download? or i did something bad with the fastboot?

Reflash kernel
Sent from my Nexus 7 using XDA Premium HD app

guyeee said:
first i got into flashmode with flashtool because i had problem to do it alone. i downaloded from here : uploaded. n e t /file/5a0kokcr/from/wyv4cf (take down spaces. i couldnt post without because i dont have 10 posts so it says i cant post links.)
then i moved the boot.img to the fastboot folder. i clicked SHIFT+RIGHT CLICK and got in to the cmd command thing. i wrote there "fastboot flash boot boot.img"
and thats it. i opened my phone and it just vibarte like its opening but nothing happens. phone not turning on.
thats all i did. what did i do wrong? is it the download? or i did something bad with the fastboot?
Click to expand...
Click to collapse
You have flashed the kernel not the rom the rom is installed by going in to recovery and choosing .zip file which you should have downloaded and put on your SD card:crying:
Download the rom and put it on your SD card then boot into recovery and flash from there:good:

You have flashed the kernel, you must also flash the ROM.
CM10 thread: http://forum.xda-developers.com/showthread.php?t=1780316
Now flash stock-based kernel with CWM: http://forum.xda-developers.com/showthread.php?t=1838916
after that your phone should boot normally.
Download and place on SD card these two files:
CM10 ROM: http://uploaded.net/file/5a0kokcr/from/wyv4cf
gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Boot to CWM (Keep pressing the Volume Down button during boot)
- Wipe Data/Factory Reset
- Mounts and Storage --> format /System
- Install zip from SD card > choose CM10 zip file
Let it flash and after that install gapps zip (without wiping).
After that, on the computer open CM10 zip file and extract boot.img - this is the kernel you now have to flash.

michel_666 said:
You have flashed the kernel, you must also flash the ROM.
CM10 thread: http://forum.xda-developers.com/showthread.php?t=1780316
Now flash stock-based kernel with CWM: http://forum.xda-developers.com/showthread.php?t=1838916
after that your phone should boot normally.
Download and place on SD card these two files:
CM10 ROM: http://uploaded.net/file/5a0kokcr/from/wyv4cf
gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Boot to CWM (Keep pressing the Volume Down button during boot)
- Wipe Data/Factory Reset
- Mounts and Storage --> format /System
- Install zip from SD card > choose CM10 zip file
Let it flash and after that install gapps zip (without wiping).
After that, on the computer open CM10 zip file and extract boot.img - this is the kernel you now have to flash.
Click to expand...
Click to collapse
:good: Could not have said it better my self great instructions:good:

tallman43 said:
You have flashed the kernel not the rom the rom is installed by going in to recovery and choosing .zip file which you should have downloaded and put on your SD card:crying:
Download the rom and put it on your SD card then boot into recovery and flash from there:good:
Click to expand...
Click to collapse
how will i do it? my phone doesnt open and when i connect to computer i hear the sound of connection but computer not reqonizing and phone not connecting.
michel_666 said:
You have flashed the kernel, you must also flash the ROM.
CM10 thread: http://forum.xda-developers.com/showthread.php?t=1780316
Now flash stock-based kernel with CWM: http://forum.xda-developers.com/showthread.php?t=1838916
after that your phone should boot normally.
Download and place on SD card these two files:
CM10 ROM: http://uploaded.net/file/5a0kokcr/from/wyv4cf
gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Boot to CWM (Keep pressing the Volume Down button during boot)
- Wipe Data/Factory Reset
- Mounts and Storage --> format /System
- Install zip from SD card > choose CM10 zip file
Let it flash and after that install gapps zip (without wiping).
After that, on the computer open CM10 zip file and extract boot.img - this is the kernel you now have to flash.
Click to expand...
Click to collapse
first of all, thank you. but like i sayd - my phone doesnt turn on at all. when i connect to computer i hear the sound of device connecting but its not showing any device and when i try to get in to flashmod or something its not working aither.
so how should i flash the cwm ?

guyeee said:
how will i do it? my phone doesnt open and when i connect to computer i hear the sound of connection but computer not reqonizing and phone not connecting.
first of all, thank you. but like i sayd - my phone doesnt turn on at all. when i connect to computer i hear the sound of device connecting but its not showing any device and when i try to get in to flashmod or something its not working aither.
so how should i flash the cwm ?
Click to expand...
Click to collapse
Turn your phone on, and press the Down volume key repeatedly. See if you can get to Recovery. If you can, flash the ROM, and you'll be fine. If not, get a stock ROM and flash it with Flashtool. Then, you can follow the proper procedure to get CWM on your phone.

Odp: please help fast
guyeee said:
first of all, thank you. but like i sayd - my phone doesnt turn on at all. when i connect to computer i hear the sound of device connecting but its not showing any device and when i try to get in to flashmod or something its not working aither.
so how should i flash the cwm ?
Click to expand...
Click to collapse
Your phone won't boot because now you have ICS ROM with Jelly Bean kernel.
Start with flashing ICS kernel as I suggested before.
Sent from my LT15i using xda app-developers app

MarcSinger said:
Turn your phone on, and press the Down volume key repeatedly. See if you can get to Recovery. If you can, flash the ROM, and you'll be fine. If not, get a stock ROM and flash it with Flashtool. Then, you can follow the proper procedure to get CWM on your phone.
Click to expand...
Click to collapse
not working to get in recovery mode. how do i get stock rom and how i will flash it if its not openning and the computer doesnt reconzige the device?
michel_666 said:
Your phone won't boot because now you have ICS ROM with Jelly Bean kernel.
Start with flashing ICS kernel as I suggested before.
how will i flash it if computer does not recognize device?
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse

Odp: please help fast
You can't boot your phone to fastboot mode? Do you have drivers installed? If you flashed CM10 kernel I'm sure your know how to boot to fastboot?
To flash stock ICS download Flashtool and stock Rom and flash it with phone in flash mode.
Sent from my Ultimate LT15i using xda app-developers app

1) Download the firmware appropriate for your phone from this page
http://xperiadev.wordpress.com/flashing/xperia-ftf-firmwares/
2) Download and install Flashtool. You can find the Setup file and the procedure on XDA or on the Net. Just do a search.
3) Flash the firmware onto your phone using Flashtool. All should be good.
PS: As far as I know, Flashtool is the only way to get yourself out of a brick. Happened to me once, worked like a charm. Give it a try and see how it goes.

michel_666 said:
You can't boot your phone to fastboot mode? Do you have drivers installed? If you flashed CM10 kernel I'm sure your know how to boot to fastboot?
To flash stock ICS download Flashtool and stock Rom and flash it with phone in flash mode.
Sent from my Ultimate LT15i using xda app-developers app
Click to expand...
Click to collapse
actually i got into fastboot mod via flashtool. i clicked there "reboot into fastboot mod"
about the drivers - im not sure. what drivers do i need?
i dont really know how to boot to fastboot.
and again. thank u for trying to help. its very importent to me.

MarcSinger said:
1) Download the firmware appropriate for your phone from this page
http://xperiadev.wordpress.com/flashing/xperia-ftf-firmwares/
2) Download and install Flashtool. You can find the Setup file and the procedure on XDA or on the Net. Just do a search.
3) Flash the firmware onto your phone using Flashtool. All should be good.
PS: As far as I know, Flashtool is the only way to get yourself out of a brick. Happened to me once, worked like a charm. Give it a try and see how it goes.
Click to expand...
Click to collapse
how to flash it with flashtool if computer doesnt reqconize the phone?

Drivers are in Flashtool's installation folder. Install them from file Flashtool-drivers.exe
To boot to fastboot your phone must be turned off. Press and hold Menu button, plug in USB cable to your phone and plug the cable to the PC.
If your LED turns blue you can release Menu button - you are in fastboot.
(To get to flash mode it's the same procedure, but you hold Back button and LED turns green.)
So, boot to fastboot.
In Flashtool click thunder icon and choose Fastboot mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now click 'Select kernel to Flash' and locate your kernel:

michel_666 said:
Drivers are in Flashtool's installation folder. Install them from file Flashtool-drivers.exe
To boot to fastboot your phone must be turned off. Press and hold Menu button, plug in USB cable to your phone and plug the cable to the PC.
If your LED turns blue you can release Menu button - you are in fastboot.
(To get to flash mode it's the same procedure, but you hold Back button and LED turns green.)
So, boot to fastboot.
In Flashtool click thunder icon and choose Fastboot mode:
Now click 'Select kernel to Flash' and locate your kernel:
Click to expand...
Click to collapse
i cant get to fastboot its not working. im pressing menu and then connecting to phone and pc and nothing happens.

guyeee said:
i cant get to fastboot its not working. im pressing menu and then connecting to phone and pc and nothing happens.
Click to expand...
Click to collapse
Keep trying. It took me several attempts before Flashtool detected my phone and was able to flash the firmware. Still, if nothing's working, I believe a trip to the service center is warranted.

How do easily root without modifying the kernel and how to upload to P600 TWRP 5.1.1

Please quick answer !!!

http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218

And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .

kacper12897 said:
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
Click to expand...
Click to collapse
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!

thank you for the guide buhohitr.
worked perfectly for me

buhohitr said:
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Click to expand...
Click to collapse
404 Page Not Found
Oh snap! Something broke! A genius monkey has been alerted.
Until he fixes it, use our glorious search tool to find ROMs, apps, tools, and other sweet mods for your phone.

haha.... http://forum.xda-developers.com/gala...ernel-t3240218

TWRP / Root for note 3 neo. 100% working. all files in one place

Hi friends today I am going to tell you how to root note3neo lollipop stock rom. Plz follow all steps. I have successfully rooted without any problem but I have heard that some are loosing their imei. So make a backup as soon as you are in twrp. Now the process as follows.
Do it at your own risk.
First Download the below file. It contains all the files including the USB drivers.
Link -: https://mega.nz/#!C99gxYDR!wkIse-u4wfCKIn-p3iH-6QSjtZ74p8Zom82-uRjqdcY
Now follow the steps below.
Installation
1.)Turn on usb debugging in developer option.
Tap the Settings option.
Tap the About Phone option.
Keep tapping the Build Number option (seven times) until it says you are a developer.
Tap the new Developer Options menu that appears.
Make sure that the USB Debugging option is checked.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC. ( Odin is available in the link zip file )
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the twrp.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
12. Next it will boot into twrp. Now first I suggest you to make a backup.
13. Now flash the SuperSU.zip file which I have provided in the zip.
Done. Your mobile is now rooted.
. Please Thank me If Helped
Now this is for the people who want xposed.
Download the file below and extract it.
https://mega.nz/#!uw8hRJQL!lnFobDr36EzNZhH15ibnIejnn9TsIIkYGDMPCOilfnA
You will find 2 file. One of apk and other is of zip.
Install the apk file. Next reboot to recovery and flash the 2nd file which is of zip.
Reboot will take some time.
Done

thanx bro

How to Root Your Samsung Galaxy A10 + Install Twrp

READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!

i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?

Oh. Alright thanks for telling me.

Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.

Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:

cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?

cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.

Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.

Can you upload it to Mediafire? Mega marks a "temporal error"...

Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?

Works on a105m?

Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes

i receive message that i running samsumg not official firmware after odin install recovery.tar

not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)

andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.

BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message

have you fixed the storage reduced to 16gb problem?

I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?