It's a beautiful case but it doesn't allow my Orb to charge it. Any one have any success finding a charger to work with this case?
Related
i got the incipio silicrylic case for the phone and am looking for a universal dock that will charge the phone with a case. so far i've considered the seidio innodock and this universal dock from amazon but im still not sure if they will fit with the thicker silicrylic case.
another option was just to get the Clingo stand and use the adapter to charge.
anyone have any suggestions?
Also wondering if anybody knows a good Micro-USB stand that can charge with a case (NEO Hybrid) without any problem.
Was thinking the case might be a problem as it takes a couple of mm of space beneath the phone and that the dock USB-male won't have enought height..
The dock from Amazon linked above does not work with my Ringke Slim case - the USB connector is too short and it doesn't plug in properly. The case is pretty slim, but unfortunately it doesn't work.
Sent from my Galaxy Nexus using XDA App
yah i was thinking the same thing about the mirco usb adapter. the one on the innodock is raised and pivots so i think it has the best chance of working with most case. Seidio states that the innodock works with their active case which is very similiar to the silicrylic case.
I have the Devicewear Ridge case.
I am looking for a Qi wireless charger that is known to work while the N7-2 is in the Devicewear Ridge case. Does anyone have any recommendations? I'll be charging with the case cover closed so it doesn't matter if the N7-2 lays flat or is propped up when charging.
I'm considering the Nokia DT-900, which used to be $25 at AT&T, but I just searched for it and it doesn't show up for some reason.
Thanks.
Get one from eBay.... They work great.
Must be 2 a output.
Just ordered a couple of TYLT Vus and I’m considering getting the i-Blason Prime Series Dual Layer Holster Case, http://www.i-blason.com/prime-series-dual-layer-holster-case-for-google-nexus-5-by-lg.html, as well. Anyone have this combination and, if so, does your TYLT Vu or Qi wireless charger work with it? Thanks.
BinkXDA said:
Just ordered a couple of TYLT Vus and I’m considering getting the i-Blason Prime Series Dual Layer Holster Case, http://www.i-blason.com/prime-series-dual-layer-holster-case-for-google-nexus-5-by-lg.html, as well. Anyone have this combination and, if so, does your TYLT Vu or Qi wireless charger work with it? Thanks.
Click to expand...
Click to collapse
I want to say possible no because of the grooves on the back of the case with the addition of the kickstand. With the kickstand alone, I think that would be hard pressed to work with the Tylt Vu. I have a couple of cases i-blason candygel and spigen ultra hybrid and those two work fine. And keeping in mind the coil looks like it's closer to the center of the phone, based on my usage of the Nexus orb. And because the kickstand is right smack in the middle, you may need to remove the case to wirelessly charge.
On a side note, I have heard the case is pretty easy to remove.
For what it’s worth, I didn’t buy this case. I wound up purchasing http://www.maxboostpower.com/shop/m...stand-fits-all-versions-of-google-lg-nexus-5/ instead and the TLYT Vu and Maxboost case with kickstand work swimmingly together and I figured I’d chime in as the i-Blason case appears similar. While I haven’t looked to see if the phone will charge faster if the kickstand is removed, it appears to be charging plenty fast.
I also have another small post regarding the Maxboost case at http://forum.xda-developers.com/showthread.php?t=2557909.
Cheers.
I'm wondering what case might be best for use with the a magnetic Qi charger (like the official nexus one).
For instance, how does the official bumper work? Does it have magnets built into the case? Are there any cases that do or should I just use an actual bumper?
If I can get the connection strong enough I might try to use the charger as a car mount.
Hi all,
Just been looking at a few different car docks for my N5 that have Qi wireless charging and come across two which I'm tossing up..
There's the AirDock ($69) which holds the phone via magnets and micro suction foam
iOttie Easy Flex Wireless Qi Charger, ($72) which has the locking mechanism rather than magnets..
Has anyone had experience with either of these two? I'm leaning towards the Airdock, but my next question is, whether the magnets will work through my Spigen SlimArmor case.... wireless charging works fine through it, so I'm assuming the magnets would too..?
TL;DR- will the magnetic mount work through a Spigen Slimarmor case?
I got an airdock myself. And use a Spigen Neo-Hybrid case. The magnets are pretty strong.
And even if they are not strong enough to use with the Spigen Slim armor case. There is a sticker with metal slaps (really thin) wich you could stick on the inside of your case.
Inductive charging will work just fine i recon.
Hope that helped.
WittePens said:
I got an airdock myself. And use a Spigen Neo-Hybrid case. The magnets are pretty strong.
And even if they are not strong enough to use with the Spigen Slim armor case. There is a sticker with metal slaps (really thin) wich you could stick on the inside of your case.
Inductive charging will work just fine i recon.
Hope that helped.
Click to expand...
Click to collapse
That would definitely do it if the internal magnets didn't work too well through the case.. Thanks for your help!