i got the incipio silicrylic case for the phone and am looking for a universal dock that will charge the phone with a case. so far i've considered the seidio innodock and this universal dock from amazon but im still not sure if they will fit with the thicker silicrylic case.
another option was just to get the Clingo stand and use the adapter to charge.
anyone have any suggestions?
Also wondering if anybody knows a good Micro-USB stand that can charge with a case (NEO Hybrid) without any problem.
Was thinking the case might be a problem as it takes a couple of mm of space beneath the phone and that the dock USB-male won't have enought height..
The dock from Amazon linked above does not work with my Ringke Slim case - the USB connector is too short and it doesn't plug in properly. The case is pretty slim, but unfortunately it doesn't work.
Sent from my Galaxy Nexus using XDA App
yah i was thinking the same thing about the mirco usb adapter. the one on the innodock is raised and pivots so i think it has the best chance of working with most case. Seidio states that the innodock works with their active case which is very similiar to the silicrylic case.
Related
Anyone know what hard case will work with a the car dock? I am looking at getting both for my atrix but i want to make sure that im not tossing money down the drain on either. I DONT want to take the case off everytime i use the car dock either. Any ideas? Thanks in advance guys.
As far as I know, the only cases that have been shown to work with the car dock are the scrapped project moto ruggedized case and the rearth ringke cases. Neither are hard cases though.
No hard cases will fit cardock
sent from my Atrix using XDA app
I should revise my previous statement. The ringke case fits as well as the incipio feather (hard case) was said to fit. It seats into the car dock, activates car mode, but the top clip doesn't sit in front of the screen.
Sent from a Honeyglowin' Atrix
I'm using a Ram Mount with my otterbox defender, and this app. Works great, other than my one problem with the defender case.
Check this out this is what I did
http://forum.xda-developers.com/showthread.php?t=1018551
Sent from my MB860 using XDA App
This is mine.
I use the Body Glove Mirage case with the HD, Car, and Lap dock. There are inserts on all of them that need to be removed (or not installed in the case of the car dock). That is all it took. Sorry, I forgot to say, it isn't a hard case but it works for me.
Anyone have the official car dock as well as the TPU case for this phone? Can you comment on whether this phone with the case fits well with the dock? Or is it better to go with the Infuse car dock and then try and shave the edges to make it fit with the case?
wont fit wither doc with a case
Hey guys I have this case on the way and and looking for a decent cradle to charge whilst at work on my computer.
I have the 2000mah extended battery but the case apparently fits no problems so just after a cradle that will fit the Neo Hybrid.
Any suggestions?
Looking on ebay for ones around $20 or so.
I cannot come up with some suggestion.
But I have to say you shouldn't use the Zenis dock, because it won't fit.
Thanks for that I will stay away from it
Anyone else have any suggestions
Will the OEM desktop stand work?
Sent from my Galaxy Nexus using Tapatalk
Just ordered a couple of TYLT Vus and I’m considering getting the i-Blason Prime Series Dual Layer Holster Case, http://www.i-blason.com/prime-series-dual-layer-holster-case-for-google-nexus-5-by-lg.html, as well. Anyone have this combination and, if so, does your TYLT Vu or Qi wireless charger work with it? Thanks.
BinkXDA said:
Just ordered a couple of TYLT Vus and I’m considering getting the i-Blason Prime Series Dual Layer Holster Case, http://www.i-blason.com/prime-series-dual-layer-holster-case-for-google-nexus-5-by-lg.html, as well. Anyone have this combination and, if so, does your TYLT Vu or Qi wireless charger work with it? Thanks.
Click to expand...
Click to collapse
I want to say possible no because of the grooves on the back of the case with the addition of the kickstand. With the kickstand alone, I think that would be hard pressed to work with the Tylt Vu. I have a couple of cases i-blason candygel and spigen ultra hybrid and those two work fine. And keeping in mind the coil looks like it's closer to the center of the phone, based on my usage of the Nexus orb. And because the kickstand is right smack in the middle, you may need to remove the case to wirelessly charge.
On a side note, I have heard the case is pretty easy to remove.
For what it’s worth, I didn’t buy this case. I wound up purchasing http://www.maxboostpower.com/shop/m...stand-fits-all-versions-of-google-lg-nexus-5/ instead and the TLYT Vu and Maxboost case with kickstand work swimmingly together and I figured I’d chime in as the i-Blason case appears similar. While I haven’t looked to see if the phone will charge faster if the kickstand is removed, it appears to be charging plenty fast.
I also have another small post regarding the Maxboost case at http://forum.xda-developers.com/showthread.php?t=2557909.
Cheers.
Hi all,
Just been looking at a few different car docks for my N5 that have Qi wireless charging and come across two which I'm tossing up..
There's the AirDock ($69) which holds the phone via magnets and micro suction foam
iOttie Easy Flex Wireless Qi Charger, ($72) which has the locking mechanism rather than magnets..
Has anyone had experience with either of these two? I'm leaning towards the Airdock, but my next question is, whether the magnets will work through my Spigen SlimArmor case.... wireless charging works fine through it, so I'm assuming the magnets would too..?
TL;DR- will the magnetic mount work through a Spigen Slimarmor case?
I got an airdock myself. And use a Spigen Neo-Hybrid case. The magnets are pretty strong.
And even if they are not strong enough to use with the Spigen Slim armor case. There is a sticker with metal slaps (really thin) wich you could stick on the inside of your case.
Inductive charging will work just fine i recon.
Hope that helped.
WittePens said:
I got an airdock myself. And use a Spigen Neo-Hybrid case. The magnets are pretty strong.
And even if they are not strong enough to use with the Spigen Slim armor case. There is a sticker with metal slaps (really thin) wich you could stick on the inside of your case.
Inductive charging will work just fine i recon.
Hope that helped.
Click to expand...
Click to collapse
That would definitely do it if the internal magnets didn't work too well through the case.. Thanks for your help!