Develop Bugs

[Guide] 2012 WFS CWM/Root

Intro: People with 2012 WFS reported to have no CWM visuals (i also do)
*NOTE: Even if you DID install this CM based rom wont work only stock based one*
CWM:
1. Unlock bootloader via HTCdev.com (look for guides there are plenty here)
2.Download http://www.mediafire.com/?pqtgftm40909r31 *updated*
3.Extract to C:/
4.Go to fastboot
4.Open Command prompt
5.type cd c:/WFS
6.type fastboot flash recovery recovery.img
7.wait for flashing to finish
8.Remove battery
9.Go to bootloader
10. click recovery wait for visuals
ROOTING:
*same as other methods*but..
1.move the cursor up then down until you see ( back button enabled)
2.Backup
3.Flash root.zip
Credits to fellow member pashaa for sharing recovery file
*NOTE* Dont blame me if anything happens to your device. I've Warned yah!
If you cant understand or want help post here and i'll try to help you out
ScreenShot of my recovery below

i dont get any visuals of black screen..just htc logo...and would you mind telling which cwm recovery version is this?? and will it work ony on this particular recovery?

vshl2995 said:
i dont get any visuals of black screen..just htc logo...and would you mind telling which cwm recovery version is this?? and will it work ony on this particular recovery?
Click to expand...
Click to collapse
modded 5.0.2.8
Sent from my Nexus 7 using xda premium

are youu sure you downloaded the recovery file correctly because it works for m
e??? all other recovery doesn't work except for that one
Sent from my Nexus 7 using xda premium

ngoralph said:
are youu sure you downloaded the recovery file correctly because it works for m
e??? all other recovery doesn't work except for that one
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
no i havent done this right now..i was asking because i tried to do the same procedure with official recovery some days ago..actually its my girlfriend's phone not mine and she is eating my head off because of low memory!!! anyway thanxx..ill try this asap and report back..!!

Link updated
Sorry for inconvenience
http://www.mediafire.com/?pqtgftm40909r31

WORKS
Works gr8...great job :good::good:

Confirmed, works here too. THX!

Thanks man,great job!.Finally I have visual recovery!Flashing ROMs or ZIPs allways conected to PC is not a pleasure!

sorinaugusto said:
Thanks man,great job!.Finally I have visual recovery!Flashing ROMs or ZIPs allways conected to PC is not a pleasure!
Click to expand...
Click to collapse
you can flash cm roms before?????

No,for my phone just Roms based on stock works.I have flashed and was working EQDKP roms,WildChild roms ,Superior sense rom,Kims mod rom.I have tried CM 7 and MIUI but did not work.But I am very interested to try CM roms or MIUI,so if you have any solutions for this please share with us.Thanks again.

cwm
I`m so Happy! It works on my wildfire s 2012! Thank you very, very much for your gift .

custom
ngoralph, i have one question - Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?). Answer please, and thanks again!

Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?).
Click to expand...
Click to collapse
I can answer this question: it is impossible. There are certain problems in work of this Mod. The first: does'nt making full nandroid backup. The second: does'nt flashing boot.img. It is necessary to develop this program still. But something, already is able: root, interface modding, ect....

Howdy.
I have flashed this recovery image and for the first time, can boot into recovery and see what I'm meant to see! Thanks. Previously (2012 hardware) I just hung on the white HTC logo screen.
Now, if I select backup and restore, press the power button, all the text disappears and I'm left with the central hat image... but nothing much happens. Pressing power again brings me back to the main menu. Same thing with -power off. The top option of reboot system now works just fine.
Any ideas? I'd like to backup my current system before flashing WildChild 3, you know - just in case anything goes wrong!
EDIT: immediate edit. cancel all of the above, I'm just new to recovery (obviously!). I went through the main menu a few times, it told me the back button was now active and away I go - backing up as we speak! Apologies!!! and thanks!

cwm
You must press one time into recovery volume + and several time volume - , while apear "back button is enable" and then such as in any cmw.

nitnit said:
You must press one time into recovery volume + and several time volume - , while apear "back button is enable" and then such as in any cmw.
Click to expand...
Click to collapse
i dont fully understand you but click volume up then down then up then downthenvolume up then down until back button enabled shows up

nitnit said:
ngoralph, i have one question - Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?). Answer please, and thanks again!
Click to expand...
Click to collapse
haven't tried cm roms on stock kernel would anyone here like to try???

Uksus17 said:
I can answer this question: it is impossible. There are certain problems in work of this Mod. The first: does'nt making full nandroid backup. The second: does'nt flashing boot.img. It is necessary to develop this program still. But something, already is able: root, interface modding, ect....
Click to expand...
Click to collapse
agree with you here but i dont think anyone is willing and able to work on this recovery.

ngoralph said:
haven't tried cm roms on stock kernel would anyone here like to try???
Click to expand...
Click to collapse
i.m using now a custom kernel on my wfs2012 (overclocked 815 MGz) without trouble, but i can`t flash any CM roms because it hapens error Status7 in CWM. I think that this CWM is too old to flash CM ROMs. But we have no any choise

[Q] FreeXperia Cm10 boot loop

So i'v been trying to get cm10 on my xperia s.
I have unlocked my bootloader, and followed this guide
https://www.youtube.com/watch?v=O52IeX93Jek
Steps i took:
1.Factory reset
2.I placed the ziped "FXP221-cm-10-20130524-UNOFFICIAL-nozomi" and "gapps-jb-20121011-signed" files on the sd card
3. flashed boot.img using fast boot
4. Installed the rom and then the gaps
5. reboot
But when i reboot i'm stuck in the boot loop.
I've now tried this 3 times but always get the boot loop. What can i do to avoid that?

Just format system & then flash rom.Everything will be fine
Sent from my Xperia SL using xda premium

I'm knew to the concept of installing new roms so i need a bit more elaborate answers.
At the moment I'm back on the stock rom and would like to know what i have to do different so that i can install cm10 without getting a boot loop.
I was successful in installing a new rom.

schpongo said:
I'm knew to the concept of installing new roms so i need a bit more elaborate answers.
At the moment I'm back on the stock rom and would like to know what i have to do different so that i can install cm10 without getting a boot loop.
I was successful in installing a new rom.
Click to expand...
Click to collapse
The Reason Why You Are Getting A Bootloop.
Flashing of Boot.img is Not Proper.
What You Need To Do.
Flash boot.img using FLASHTOOL.
In the zip file you have got, extract boot.img in the zip and place it on desktop or anywhere you can find.
Keep zip file in your phone storage.
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (from desktop if you have extracted there)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.
In Recovery
-Whip Cache Partion,
-Cache,
-Dalvik Cache,
-Fix Permissions,
Flash The ROM
(Step By Step GUIDE With Images)
http://forum.xda-developers.com/showthread.php?t=1963961

little problem
dwarkesh2492 said:
The Reason Why You Are Getting A Bootloop.
Flashing of Boot.img is Not Proper.
What You Need To Do.
Flash boot.img using FLASHTOOL.
In the zip file you have got, extract boot.img in the zip and place it on desktop or anywhere you can find.
Keep zip file in your phone storage.
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (from desktop if you have extracted there)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.
In Recovery
-Whip Cache Partion,
-Cache,
-Dalvik Cache,
-Fix Permissions,
Flash The ROM
(Step By Step GUIDE With Images)
http://forum.xda-developers.com/showthread.php?t=1963961
Click to expand...
Click to collapse
Don't know why, but it doesn't work for me.
Got a XPeria Go with formerly CM9 on it, updated to 4.1.2 and follow this guide: http://go.apeboys.org/index-de.html wich with CM9 worked perfectly. But, now with CM10 i got everytime a Bootloop and not able to fix it.
i used also your guide for flashing the boot.img but it even doesn't work
i tried it several times, and searched for reasons and another guids and tipps, but nothing worked, and since my x10 mini got a sim-lock wich i can't fix, im a little afraid about exotic tipps.
i got an open Bootloader and everything should be ready to do this....
so my question is: How can i fix that?
thanks for help and sry for my bad english.

Exact same problem here
Aaskereija said:
Don't know why, but it doesn't work for me.
Got a XPeria Go with formerly CM9 on it, updated to 4.1.2 and follow this guide: http://go.apeboys.org/index-de.html wich with CM9 worked perfectly. But, now with CM10 i got everytime a Bootloop and not able to fix it.
i used also your guide for flashing the boot.img but it even doesn't work
i tried it several times, and searched for reasons and another guids and tipps, but nothing worked, and since my x10 mini got a sim-lock wich i can't fix, im a little afraid about exotic tipps.
i got an open Bootloader and everything should be ready to do this....
so my question is: How can i fix that?
thanks for help and sry for my bad english.
Click to expand...
Click to collapse
I don't know what's the problem here. The last thing that would cause this would be the fact that I changed the .zip's name (I did that).

AlexBurnout77 said:
I don't know what's the problem here. The last thing that would cause this would be the fact that I changed the .zip's name (I did that).
Click to expand...
Click to collapse
Thank you for the answer.
I fixed the Problem be reflashing the rom and kernel.

How?
schpongo said:
Thank you for the answer.
I fixed the Problem be reflashing the rom and kernel.
Click to expand...
Click to collapse
BTW this is still a problem for me. Nothing seems to work. I flashed everything and wiped everything before flashing but still no satisfying outcome.

[Recovery] for Lenovo A850+ Carliv 2.2 touch base cwm 6.0.4.4

Ported carliv 2.2 for lenovo A850+
Flash with mobileuncle mtk tool
Bug : wipe cache to slow
Download :
http://www65.zippyshare.com/v/85199017/file.html
Or
https://mega.co.nz/#!VE10zTZI!QJbvZnEBLEMGoBga1zRoqJaCZ3XnLwdnbmP6mZ-R5kM

Reserve

Hi.
Now i try it,but not worked unfortunately.Again i have the Chinese recovery.....why?

kostast1 said:
Hi.
Now i try it,but not worked unfortunately.Again i have the Chinese recovery.....why?
Click to expand...
Click to collapse
U cant flash it or it cant go to recovery?
Seems like ur flashing not successful.. U use mobileuncle?

jayXzMx said:
U cant flash it or it cant go to recovery?
Seems like ur flashing not successful.. U use mobileuncle?
Click to expand...
Click to collapse
Yes i flash it with mobileuncle but nothing.....again Chinese recovery...

kostast1 said:
Yes i flash it with mobileuncle but nothing.....again Chinese recovery...
Click to expand...
Click to collapse
If ur mobileuncle have root access suppost it can be done. Try rename to recovery.img then reflash again or use flash tool to flash it..

jayXzMx said:
If ur mobileuncle have root access suppost it can be done. Try rename to recovery.img then reflash again or use flash tool to flash it..
Click to expand...
Click to collapse
Hi,yes mobileuncle have root access,rename???give me an example pls.

kostast1 said:
Hi,yes mobileuncle have root access,rename???give me an example pls.
Click to expand...
Click to collapse
I will let u know again later.. I redo back.. As mine should be no problem.. Have 3 times flashing with no issue.

jayXzMx said:
I will let u know again later.. I redo back.. As mine should be no problem.. Have 3 times flashing with no issue.
Click to expand...
Click to collapse
So i expect a reply from you,tnx.

kostast1 said:
So i expect a reply from you,tnx.
Click to expand...
Click to collapse
Kostast bro.. Try the other link ive update.

jayXzMx said:
Kostast bro.. Try the other link ive update.
Click to expand...
Click to collapse
Ok,i do that now.
All is ok now whit new link!!!!!!!

kostast1 said:
Ok,i do that now.
All is ok now whit new link!!!!!!!
Click to expand...
Click to collapse
Is it ok now bro?

jayXzMx said:
Is it ok now bro?
Click to expand...
Click to collapse
Yes great job!!!Tnx again!!!!

not chineese recovery
kostast1 said:
Yes i flash it with mobileuncle but nothing.....again Chinese recovery...
Click to expand...
Click to collapse
i guess what you're seeing is not a full recovery but a prerecovery test menu, the same as for me. The cwm is there, i am able to acces it through android with restart to recovery function.

cristi2442978 said:
i guess what you're seeing is not a full recovery but a prerecovery test menu, the same as for me. The cwm is there, i am able to acces it through android with restart to recovery function.
Click to expand...
Click to collapse
i dont get u?? meaning your phone come with precwm?

yes. it has a Chinese language menu that comes up when i press vol up and Power button. i can acces the regular cwm only through restart to recovery menu from within android
Sent from my Lenovo A850+ using Tapatalk

Hello guys
Well i have just received my phone yesterday and im back on the modding part.
Sooo happy that there are people out there already developing for this phone.
Problem is, i downloaded the recovery, from both links, tried to flash it with mobiluncle tools, it took 2 seconds, maybe its to fast and its not really flashing??
rebooted to recovery and i can only see 2 lenovo logos overlapping and in the lower screen text saying Recovery mode.
It hangs a few seconds and then reboots normally. but no recovery.
Then tried to flash with flashtool. same story.
i could never access the original recovery anyway, it just said no command.
all information on the phone or other apps says unknown recovery, is this normal when its a stock recovery?
Any other ideas? need help, this phone is awesome so far, except for the internal memory, its too small and i have all of the phone memory doing nothing, i have my sd card, but i wanted to mod it in the first place to make the internal memory partition bigger.
Anyway this is not the thread to talk bout that, but any help with flashing this recovery?
Much appreciated.

onbsecret said:
Well i have just received my phone yesterday and im back on the modding part.
Sooo happy that there are people out there already developing for this phone.
Problem is, i downloaded the recovery, from both links, tried to flash it with mobiluncle tools, it took 2 seconds, maybe its to fast and its not really flashing??
rebooted to recovery and i can only see 2 lenovo logos overlapping and in the lower screen text saying Recovery mode.
It hangs a few seconds and then reboots normally. but no recovery.
Then tried to flash with flashtool. same story.
i could never access the original recovery anyway, it just said no command.
all information on the phone or other apps says unknown recovery, is this normal when its a stock recovery?
Any other ideas? need help, this phone is awesome so far, except for the internal memory, its too small and i have all of the phone memory doing nothing, i have my sd card, but i wanted to mod it in the first place to make the internal memory partition bigger.
Anyway this is not the thread to talk bout that, but any help with flashing this recovery?
Much appreciated.
Click to expand...
Click to collapse
hi.. if the recovery file name to long just replace it as recovery.img.. make sure ur mobileuncle grant root. it should be fine.. as many user can flash it..
there is 2 model out there.. A850p and a850i.. make sure its a850p because its not for a850i.

Works
jayXzMx said:
hi.. if the recovery file name to long just replace it as recovery.img.. make sure ur mobileuncle grant root. it should be fine.. as many user can flash it..
there is 2 model out there.. A850p and a850i.. make sure its a850p because its not for a850i.
Click to expand...
Click to collapse
I Use lenovo a850+ and works nice! Thanks JayXzMx.

done

[Q] boot loop

Hello,
My son's gn is catched in a boot loop : google then X then google and so on
I wiped (factory reset) No result
I can access to recovery so i flashed 4.3 (JWR66Y) google factory image here : https://developers.google.com/android/nexus/images?hl=FR. The flash is completed but still catched in a boot loop.
I can even flash a custom recovery and all goes well i can perform anything in recovery mode but i'm still in the boot loop
when i restart the phone.
Any idea ?
Thanks in advance.

DarkGruf said:
Hello,
My son's gn is catched in a boot loop : google then X then google and so on
I wiped (factory reset) No result
I can access to recovery so i flashed 4.3 (JWR66Y) google factory image here : https://developers.google.com/android/nexus/images?hl=FR. The flash is completed but still catched in a boot loop.
I can even flash a custom recovery and all goes well i can perform anything in recovery mode but i'm still in the boot loop
when i restart the phone.
Any idea ?
Thanks in advance.
Click to expand...
Click to collapse
No idea anyone ? Could it be hardware related for instance ?

Wipe system, data, cache, dalvik cache and internal. Then flash factory image.

h4xx0rr said:
Wipe system, data, cache, dalvik cache and internal. Then flash factory image.
Click to expand...
Click to collapse
I did, about 5 or 6 times and still in boot loop.
ty

DarkGruf said:
Hello,
My son's gn is catched in a boot loop : google then X then google and so on
I wiped (factory reset) No result
I can access to recovery so i flashed 4.3 (JWR66Y) google factory image here : https://developers.google.com/android/nexus/images?hl=FR. The flash is completed but still catched in a boot loop.
I can even flash a custom recovery and all goes well i can perform anything in recovery mode but i'm still in the boot loop
when i restart the phone.
Any idea ?
Thanks in advance.
Click to expand...
Click to collapse
What caused this ? Did you flash a ROM or something ?

Bootloader is unlocked (padlock symbol visible) right? If you've previously locked it, then Recovery won't do anything if you haven't unlocked.

FredFS456 said:
Bootloader is unlocked (padlock symbol visible) right? If you've previously locked it, then Recovery won't do anything if you haven't unlocked.
Click to expand...
Click to collapse
Yes it's unlocked, I can even flash a custom recovery.

Atishay Jain said:
What caused this ? Did you flash a ROM or something ?
Click to expand...
Click to collapse
It's my son's device so i don't know really but I'mquite sure he did not flash anything. I do it for him when he needs.So no, I have no idea. One minute before it was working one minut after it reboot itself and stays in boot loop.

DarkGruf said:
It's my son's device so i don't know really but I'mquite sure he did not flash anything. I do it for him when he needs.So no, I have no idea. One minute before it was working one minut after it reboot itself and stays in boot loop.
Click to expand...
Click to collapse
Was there any mod installed (something that u flashed to make the phone faster) like the v6 supercharger or any other mod ?
Also I think that you should try updating your recovery and then flashing a rom onto your device. I think CM is available for your device (which I assume to be a nexus as you have mentioned the nexus system images page in the OP). Search the xda threads for a ROM and try flashing it.

Atishay Jain said:
Was there any mod installed (something that u flashed to make the phone faster) like the v6 supercharger or any other mod ?
Also I think that you should try updating your recovery and then flashing a rom onto your device. I think CM is available for your device (which I assume to be a nexus as you have mentioned the nexus system images page in the OP). Search the xda threads for a ROM and try flashing it.
Click to expand...
Click to collapse
What is v6 supercharger???

h4xx0rr said:
What is v6 supercharger???
Click to expand...
Click to collapse
Its a script to improve performance. Anyways u seem to be unaware of that so it means you've not done anything like installing a MOD, Try updating the recovery.

Can you give me link for supercharger?

Atishay Jain said:
Was there any mod installed (something that u flashed to make the phone faster) like the v6 supercharger or any other mod ?
Also I think that you should try updating your recovery and then flashing a rom onto your device. I think CM is available for your device (which I assume to be a nexus as you have mentioned the nexus system images page in the OP). Search the xda threads for a ROM and try flashing it.
Click to expand...
Click to collapse
No, I did not intall any mod, last rom i had on it was a modaco but when I gave thephone to my son I just pushed the last stock root rom i picked from xda 4.2 I think. Still I goona try what u sayed, I did not try to push a custom rom only google images. TY, I will tell what happens. And yes it's an European Samsung Galaxy Nexus as we are in Galaxy nexus section

h4xx0rr said:
Can you give me link for supercharger?
Click to expand...
Click to collapse
Here you go :
http://forum.xda-developers.com/showthread.php?t=2733251
There are also a few other tricks and MODs listed there if u want to improve your phone's performance.
Rate the thread well if it helped you.:good:

Looks allot like my girlfriends phone and this thread http://forum.xda-developers.com/galaxy-nexus/help/normal-boot-loop-problem-t2875961
factory reset does not do/wipe anything, pushed files don't stay on the device after reboot, flashing new rom from PC does not stick
Nexus seems to be in some kind of readonly mode.

KitKat 32bit to LP 64 bit in a snap.

SO... DO we want to flash stock lollipop and then flash custom roms... It is abselutely not needed now.
If you are somone on L trying to go to KK here is the thread for you http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
So straight to steps....
1) You have to download https://drive.google.com/open?id=0B4etFrzyEA01UDlvVUpNaHJVTjQ&authuser=0
2) You have to flash that zip with a custom recovery. Explaned below
3) Flash any 64bit ROMs you like....
How to flash zip
Copy the file form PC to Yu Yureka(If you have downloaded it with PC)
Reboot into recovery ( For easy reboot into recovery you have to enable advanced reboot in developer options )
Select Install Zip file
Select install for SDcard
Browse to the folder you have put it.
Install it.
And Vola!
SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
So... Guys as usual Hit Thanks if you fond this post useful....

Abhiram Shibu said:
SO... DO we want to flash stock lollipop and then flash custom roms... It is abselutely not needed now.
If you are somone on L trying to go to KK here is the thread for you http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
So straight to steps....
1) You have to download https://drive.google.com/open?id=0B4etFrzyEA01UDlvVUpNaHJVTjQ&authuser=0
2) You have to flash that zip with a custom recovery. Explaned below
3) Flash any 64bit ROMs you like....
How to flash zip
Copy the file form PC to Yu Yureka(If you have downloaded it with PC)
Reboot into recovery ( For easy reboot into recovery you have to enable advanced reboot in developer options )
Select Install Zip file
Select install for SDcard
Browse to the folder you have put it.
Install it.
And Vola!
SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
So... Guys as usual Hit Thanks if you fond this post useful....
Click to expand...
Click to collapse
Wow thanks alot.
Btw will it wipe internal storage?

Does this zip comes with any 64bit recovery or do i need to go to fastboot mode & install 64bit recovery?
Is it compatible with philztouch recovery?

Also, what happens when this zip is flashed?
Before flashing a Rom & if i'm in recovery, will my internal memory be shown in PC when i connect yureka via data cable?(should i copy CM 12.x Rom to internal memory before flashing this zip? )
-Sorry for asking so many qt's all at once... But would appreciate if u can answer all of my queries to get rid of my worries

works like a charm, first boot on blisspop was really smooth, no lag and glitches like stock cm12....got blank screen when i tried to get into recovery(which was obvious) but from second boot, i was stuck on the YU boot logo....It was because of the 32bit recovery...flashed 64-bit CWM through fast boot and again i successfully booted
PS- It doesnt wipe your sdcard

ujilraj said:
Does this zip comes with any 64bit recovery or do i need to go to fastboot mode & install 64bit recovery?
Is it compatible with philztouch recovery?
Click to expand...
Click to collapse
Any 64 bit recovery will work. In my openion I recoment TWRP recovery. It is a touch recovery and has many options like file manager, backup compression etc.
Sorry for the late reply my school reopened so I didn't get any time to read this thread....
Anyway I am going to make an another zip file for flashing recovery within 2 days. Both 64 bit and 32bit....
Both TWRP and CWM.

ujilraj said:
Also, what happens when this zip is flashed?
Before flashing a Rom & if i'm in recovery, will my internal memory be shown in PC when i connect yureka via data cable?(should i copy CM 12.x Rom to internal memory before flashing this zip? )
-Sorry for asking so many qt's all at once... But would appreciate if u can answer all of my queries to get rid of my worries
Click to expand...
Click to collapse
So.... It does not wipe your SDCARD when following this method. Its safe. Only thing you have to do is flash 64 bit recovery.
Any way data backup is highly recommended. We ate playing with firmware know? Any thing can happen!

Jimmymanda1 said:
works like a charm, first boot on blisspop was really smooth, no lag and glitches like stock cm12....got blank screen when i tried to get into recovery(which was obvious) but from second boot, i was stuck on the YU boot logo....It was because of the 32bit recovery...flashed 64-bit CWM through fast boot and again i successfully booted
PS- It doesnt wipe your sdcard
Click to expand...
Click to collapse
Thank you for your reply while I was away!!!

Yes it works as promised... No issues

SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
Click to expand...
Click to collapse
Hey @Abhiram Shibu could you tell me what exactly does this flashing do? Does it change our bootloader?

So... This is what it does...
Frozen_Lemon said:
Hey @Abhiram Shibu could you tell me what exactly does this flashing do? Does it change our bootloader?
Click to expand...
Click to collapse
It actually has some of modem files, 64 bit partition details, fastboot(BIOS) for 64bit. You can go ahead and exact the zip file and read the script inside it. It does not have a 64bit recovery so you wold have to flash a recovery of your choice with fastboot. I hope you got your doubts cleared. If you have any further doubts feel free to reply:good:. i am planning to merge recovery flasher into this zip stay tuned!

Make a 64bit to 32 bit file also
Sent from my YUREKA using XDA Free mobile app

Abhiram Shibu said:
It actually has some of modem files, 64 bit partition details, fastboot(BIOS) for 64bit. You can go ahead and exact the zip file and read the script inside it. It does not have a 64bit recovery so you wold have to flash a recovery of your choice with fastboot. I hope you got your doubts cleared. If you have any further doubts feel free to reply:good:. i am planning to merge recovery flasher into this zip stay tuned!
Click to expand...
Click to collapse
Yea, I did mate Thanks thats a cool script. :thumbsup:
And hey, I'd suggest you leave out the recovery, cuz some people like to have different tastes (just a suggestion ) and nice work

gtsfreak said:
Make a 64bit to 32 bit file also
Sent from my YUREKA using XDA Free mobile app
Click to expand...
Click to collapse
I have done that earlier than this lol.... Here is the link http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
I hope it works.
YU Play GOD!

Thanks bro will try
Sent from my YUREKA using XDA Free mobile app

Hey man I still have a question lingering. Can I revert to cm11 after flashing this using my Backup?
Edit: Oops wrong thread I know but you know what I meant right? :thumbup:
Edited again: I found it it mate thanks again great work bro
Sent from my AO5510 using XDA Free mobile app

Yes of course this is my thread on that http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587 . Very very sorry for the late reply.

any other way to flash recovery?
I dont have a pc right now. After flashing this file and the rom, can i flash the recovery by any other method which does not require pc?

shekhawat2 said:
I dont have a pc right now. After flashing this file and the rom, can i flash the recovery by any other method which does not require pc?
Click to expand...
Click to collapse
Yes you can. If the ROMs rooted already then you can use the app Flashify to flash the recovery (I guess your phones booting up)
If not you do NEED a pc

Abhiram Shibu said:
SO... DO we want to flash stock lollipop and then flash custom roms... It is abselutely not needed now.
If you are somone on L trying to go to KK here is the thread for you http://forum.xda-developers.com/yureka/general/cyanogen-12-lollipop-to-cyanogen-11-t3096587
So straight to steps....
1) You have to download https://drive.google.com/open?id=0B4etFrzyEA01UDlvVUpNaHJVTjQ&authuser=0
2) You have to flash that zip with a custom recovery. Explaned below
3) Flash any 64bit ROMs you like....
How to flash zip
Copy the file form PC to Yu Yureka(If you have downloaded it with PC)
Reboot into recovery ( For easy reboot into recovery you have to enable advanced reboot in developer options )
Select Install Zip file
Select install for SDcard
Browse to the folder you have put it.
Install it.
And Vola!
SO... No Tension, No large number of steps, No waiting. Flash this zip and you are good to go...
So... Guys as usual Hit Thanks if you fond this post useful....
Click to expand...
Click to collapse
Thanks dude, works perfectly !!