Develop Bugs

TP2 Vodafone UK Bluetooth

Sorry if this has been asked before but could not find anything in the forums.
I have a Vodafone TP2 and even though the bluetooth connects and stays connected to my car bluetooth or the Vodafone free headset that came with the phone, I get no sound through bluetooth during calls. The BT initiates cals fine but if I connect a call in or out I have to disconnect the BT and use the phone.
Any ideas? I have hard reset twice now and it seems to work once then not again.

youre no the only one, ive had the same problem with the vodafone model. Help would be awesome, please...

According to Vodafone my warranty would be voided if I put the stock HTC rom on my TP2, but if it fixes the radio and gets rid of the colour scheme I would do it, but I seem to remember reading somwhere that the phone would be bricked if the HTC rom upgrade was attempted? I can't see why that would be, any input appreciated!

Apparently this is a known problem.
HTC have already posted an upgrade to their site but as yet Vodafone have not done the same although they will upgrade the software through their own repair service.
Don't hold you breath for the VF fix.

I spent ages on the phone to Vodafone last night and they are swapping the phone out tomorrow, I'll update with the (lack of) bluetooth news...

I ended up with a refurbished fone when i sent my tp1 to vodafone for a firmware upgrade

Luckily mine is under a week old so I get a direct replacement...
Hopefully!

I do have a bluetooth problem as well... When connected to my car bluetooth, It will drop an incoming call immediately it registers... but i can make a call through the bluetooth fine!
Hopefuly this can be fixed!

comclusive said:
Sorry if this has been asked before but could not find anything in the forums.
I have a Vodafone TP2 and even though the bluetooth connects and stays connected to my car bluetooth or the Vodafone free headset that came with the phone, I get no sound through bluetooth during calls. The BT initiates cals fine but if I connect a call in or out I have to disconnect the BT and use the phone.
Any ideas? I have hard reset twice now and it seems to work once then not again.
Click to expand...
Click to collapse
In The Bluetooth settings / Advanced / Audio try ticking the "play sounds on remote device" it might help you.
Gordon

That wasn't the issue, I had already tried that theory. Still, new phone arriving today...

ok, new phone, same issue. excpet it does work on my BT headset but not my car.
So...
Can anyone tell me definitively, am I able to flash my Vodafone TP2 with the new HTC rom from their website, and am I able to backup up the existing rom at all?

comclusive said:
ok, new phone, same issue. excpet it does work on my BT headset but not my car.
So...
Can anyone tell me definitively, am I able to flash my Vodafone TP2 with the new HTC rom from their website, and am I able to backup up the existing rom at all?
Click to expand...
Click to collapse
I'd like to know the answer to this too, but it seems our Voda TP2s are few and far between in the xda-dev world!!

So I have HardSPL'd my device and wanted to put the HTC rom on, but I can't download it from HTC due to my serial number!

I'm sure the ROM has been posted on here somewhere, if not there is a thread somewhere with valid EUR serial numvers that you can use

Ah yes, I found the ROM and flashed happily away!
I am now running the HTC ROM and although I have not yet connected to my car bluetooth, I am 100% happier with the interface!
I'm not much for screenshots, but here is one of my sync centre showing the "old" Vodafone partnership and the new one:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And a couple of my phone screen:

I wonder if this is what is causing my problems. I have a vodafone TP2 - I bought it about a month ago. It works absolutely fine with a Jabra BT500 headset.
However, I have a handsfree car kit that is part of an Alpine stereo in the car. Basically it's a Parrot unit that is incorporated into the firmware of the stereo. It works fine for making outgoing calls and connects ok, but as soon as I receive an incoming call it gets immediately cut off and diverted to my answering service.
Apparently Alpine are releasing new firmware for the stereo next month that can be flashed onto the unit so I may see if that fixes it. Otherwise I'm not sure what to do!

[Q] Using WiFi and BT at the same time....

Hi
When I first bought my 1st Gen Nexus 7 I found a big issue when using both BT (for my headset) and WiFi - to stream content from the Internet, at the same time.
I posted here, with more detail, but got no response....
http://forum.xda-developers.com/showthread.php?t=2212049
....this has continued and I now understand that others have experienced it with their tablets or phones. The New Nexus 7 is not available as yet in the UK but for those who have it, and can pair with a BT headset, does this version have the same issue....?
It can be really frustrating trying to stream a video over the Internet via WiFi and trying to listen to it using my BT headset as the WiFi will eventually just grind to an halt.
Thanks

Im not sure though, but what I noticed from someone that they fixed that problem in 4.3, I have the same problem with my nexus 4, waiting my rom to update to 4.3 to test it, but this issue is not on my nexus 7, either stock or on custom rom, but the n4 has that issue either stock or custom rom, let just wait for my rom and will give you my feedback, hope this helped! Btw, let me make sure of the issue, the issue is when both connected, after using the internet, you get some wifi drops, right?
Sent from my Nexus 4 using xda app-developers app

Thanks for the reply
It used to be WiFi drops but it is more of the WiFi simply grinding to a stop, I have noticed this since the 4.3 update to the Nexus 7.
It appears to be connected and if I pause the audio stream over the BT headset (listening to an audio book or music) then it might start again. If I turn off the BT headset it will then work perfectly.
I had noticed this for the Nexus 4....
https://code.google.com/p/android/issues/detail?id=41631
I note that the Nexus 10 has been mentioned with similar issues in the above thread.
Some one else with a Nexus 7....
I have the sam issue. If I want to listen to youtube trough my bluetooth hi-fi system the wifi drops out. But if I use only music that is on my nexus 7 the bluetooth works fine but I can not use any browser or the internet while I am using the bluetooth. This is the first time I use the bluetooth as an audio source and I just bought a bluetooth speaker and it fails very disappointing. I think it is wearied it is conflicting on the same frequency because they should have tested bluetooth and wifi at the same time when they where quality controlling these units if this was a hardware problem. But if it is a software problem google would have fixed the problem by now because it has been a problem for a very long time so it has to be an hardware issue on the 2.4ghz band. That band is what 90% of all wirreless users are using so this is a major issue. Please fix this problem google.
Click to expand...
Click to collapse
The combination of using the BT and WiFi at the same time has never been a good experience for me with the Nexus 7 (tried two). My father in laws Nexus 4 has similar issues to what you noted, or did the last time that I tried it.
Using BT and WiFi at the same time Nexus 7 4.3 JB.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Using WiFi only Nexus 7 4.3 JB...

I also have this prob on 2013 nexus 7. Running wifi g and wpa2 router. Tried changing bands to 1 and 11, and also bt coexistence mode on my routers, but still with prob. Nexus looks like wifi is connected (is blue), but no data goes thru.

mmm not looking too promising then.
I was really hoping that they had resolved this one with the new Nexus revision.
Just FYI....
The same test done with my Motorola Razr i phone using a 5Ghz WiFi connection...
BT on...
BT off...
So the Razr i with a 5Ghz WiFi is fine and no issues are present.
The speed was probably slower than the Nexus due to being at the opposite end of the house to the router at the time of testing.

Still with problem. For those running bt and wifi g without problems, what channel are you running on? I tried 1 and 11 and still no luck.

I have had this issue on my phones for as long as I can remember.
Watching YouTube, or steaming anything while I'm on a phone call and connected to a Bluetooth headset will fail after a few short minutes on WiFi

Doesn't happen on my galaxy nexus. I did hear it was a problem with nexus 4, I think it might use bt/wifi parts with nexus 7.

vimesUK said:
Hi
The New Nexus 7 is not available as yet in the UK but for those who have it, and can pair with a BT headset, does this version have the same issue....?
Thanks
Click to expand...
Click to collapse
Same issues. Look over here:
http://productforums.google.com/forum/#!topic/nexus/ORce7P9V4qU
If they can't fix it the next 2 or 3 weeks, I'll sell my new N7lte.
regards
Thrashx

mmm that is indeed not good.
I am not sure that it could be easily fixed, considering that I have seen this being posted about, and acknowledged, for some considerable time now within a Nexus 4 Google group.
With my Nexus 7 (2012) it is very very frustrating not to be able to stream video etc via WiFi whilst wearing my BT headset.

Nexus 5X and Skoda Superb Bluetooth Pairing Problems

I've got a Skoda Superb with Columbus head unit. I've paired half a dozen phones (Nexus One, Galaxy Nexus, Nexus 4, iPhone 5, 2 x Z5 Compact) with it successfully until I got my Nexus 5X.
The procedure is to use the car's multi-functional display to search for a nearby device with the phone at the Bluetooth settings screen and with Bluetooth on. The car displays a 16 digit code made of 4 sets of consecutive numbers, e.g. 3333 4444 5555 6666 which is then entered as a PIN in the handset.
After a little handshaking that's usually the end of it. But the Nexus 5X then wants another PIN entered, but the car continues to give a 'connecting...' message with no PIN displayed. After much trial and error I've found that if I supply the same number again quickly enough it'll sometimes accept it. The car then flashes the PIN - if a different PIN is shown then the phone fails to connect.
Assuming a connection is made the car then prompts to name the device and create a user profile, appears to download contacts etc. I've not yet had time to test fully what functions are and aren't available at this point.
In any event the phone won't reconnect when I leave the car and come back. The car immediately displays a PIN to enter, but it doesn't appear to be attempting to connect as the phone never displays the PIN entry dialogue.
Additionally I get a permanent notification on the Nexus 5X showing the Bluetooth icon titled 'Bluetooth SIM access' and the message 'Request client to disconnect?'. There's a disconnect button on the notification which doesn't appear to do anything, and I can't clear the notification without restarting the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried resetting the car's Bluetooth to factory settings, removing it from the phone and trying again.
Any other suggestions please?

Unpairing problems
Hi huntajc,
I had similar problems pairing/connecting to my Audi MMI system. After many attempt, MMI reboots, clearing contacts, removing all BT paired devices, etc. it worked. Don’t ask me what the trick was. But… the doesn’t unpair. I also get the same message in my N5X when leaving and turning off the car. In the top left (!) corner a BT sign appears also with the message 'Request client to disconnect?'. The disconnect button on the notification doesn't appear to do anything. When using the car again the N5X won’t connect. However when turning off and on the BT on the N5X, the `Request client to disconnect?` disappears and the phone pairs again with the MMI system. No idea how to set the N5X such that it unpairs automatically.
Greetings,
Materie62
huntajc said:
I've got a Skoda Superb with Columbus head unit. I've paired half a dozen phones (Nexus One, Galaxy Nexus, Nexus 4, iPhone 5, 2 x Z5 Compact) with it successfully until I got my Nexus 5X.
The procedure is to use the car's multi-functional display to search for a nearby device with the phone at the Bluetooth settings screen and with Bluetooth on. The car displays a 16 digit code made of 4 sets of consecutive numbers, e.g. 3333 4444 5555 6666 which is then entered as a PIN in the handset.
After a little handshaking that's usually the end of it. But the Nexus 5X then wants another PIN entered, but the car continues to give a 'connecting...' message with no PIN displayed. After much trial and error I've found that if I supply the same number again quickly enough it'll sometimes accept it. The car then flashes the PIN - if a different PIN is shown then the phone fails to connect.
Assuming a connection is made the car then prompts to name the device and create a user profile, appears to download contacts etc. I've not yet had time to test fully what functions are and aren't available at this point.
In any event the phone won't reconnect when I leave the car and come back. The car immediately displays a PIN to enter, but it doesn't appear to be attempting to connect as the phone never displays the PIN entry dialogue.
Additionally I get a permanent notification on the Nexus 5X showing the Bluetooth icon titled 'Bluetooth SIM access' and the message 'Request client to disconnect?'. There's a disconnect button on the notification which doesn't appear to do anything, and I can't clear the notification without restarting the phone.
I've tried resetting the car's Bluetooth to factory settings, removing it from the phone and trying again.
Any other suggestions please?
Click to expand...
Click to collapse

huntajc said:
I've tried resetting the car's Bluetooth to factory settings, removing it from the phone and trying again.
Any other suggestions please?
Click to expand...
Click to collapse
I own a Superb myself and had also problems with pairing the device. It prompt everytime to pair the phone..
After i unchecked 'contact sharing', the phone connects without any problems. I hope this will fix your problem too.

Hi, is there anyone else having the same issue? I have got it since I bought this phone on November 2015. It was never resolved by any security update, nor Nougat.
I can make through the paring cycle just by guessing what PIN will BT unit require. It is then paired and will connect automatically, but the connection everytime takes maybe 45 seconds instead of just seconds like with any other phone. Could this be reason to ask for warranty repair?
The other issue that could be caused by the same bad BT is that when I am using Waze on the phone, its voice commands are supposed to go through the Columbus unit's audio. This unfortunately only works when there is and ongoing call. If no call, the command is just lost.

capo56 said:
Hi, is there anyone else having the same issue? I have got it since I bought this phone on November 2015. It was never resolved by any security update, nor Nougat.
I can make through the paring cycle just by guessing what PIN will BT unit require. It is then paired and will connect automatically, but the connection everytime takes maybe 45 seconds instead of just seconds like with any other phone. Could this be reason to ask for warranty repair?
The other issue that could be caused by the same bad BT is that when I am using Waze on the phone, its voice commands are supposed to go through the Columbus unit's audio. This unfortunately only works when there is and ongoing call. If no call, the command is just lost.
Click to expand...
Click to collapse
Yes, I have a similar problem with the Superb's Columbus headset and my Nexus 6P. They pair successfully but cut the mobile data connection so there is a 'no network' message. Sometimes phone calls or texts get through but are not logged on the phone.
I now rarely the use the Bluetooth but use the phone's speakers. Time for a change.
Any help would be most welcome.
Sent from my Nexus 6P using Tapatalk

Car kit Bluetooth problem, help pls :(

Hi everyone,
So I bought my HTC 10 a month ago.
Yesterday I took one of my cars, which I haven't driven for a long time, and tried to pair my phone with the car kit. For the record, I have a Parrot Mki9200 installed, since the car's kit did not have BT.
Now the weird part:
- I search the device - OK
- I pair the devices - everything still OK
-after that, it is supposed to instantly connect with the unit and then download my contacts. Long story short, it cannot connect, no matter what. I tried many times but all that happens is I keep waiting until I get an error from the phone " unable to connect" and then something like "make sure that your devices are one, etc".
I could really use some help on this. I even made a factory reset on the Bluetooth unit just to eliminate any conflicts. I called the authorized service in my country and they told me it should be a problem with the phone.
The weird thing is that my M8 connects flawlessly (on Android 6.0), so does a Huawei P9 lite on Marshmallow, so do all the other devices.
Any help?? The last thing I want is to make a factory reset on the phone and make no difference whatsoever.
Is there any way to reset the BT settings on the phone without factory reset? Any other way to fix it or even find the cause?
FYI, on 1.90 firmware currently, no root.
Any help will be highly appreciated, since I cannot imagine what else I can do with a new phone and no option to connect it in my car.
Thanks in advance,
Cheers,
Thanos
Sent from my HTC 10 using Tapatalk

Nobody???
This is what I am getting btw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC 10 using Tapatalk

I had the same problem with pairing the device with my sony srs-x5 bt speaker.Got no luck,tried cleaning dat and cache,didn't help;and did a factory reset.Taht fixed it.This happened to me once on stock rom,now I am on custom without any connection problems.

Did you pair it without problem but was not able to connect??
Thnx
Sent from my HTC 10 using Tapatalk

thanito said:
Did you pair it without problem but was not able to connect??
Thnx
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Yes,it was paired but not connected.I got the same error message.

ordeniz said:
Yes,it was paired but not connected.I got the same error message.
Click to expand...
Click to collapse
A few hours ago I finally found the culprit of the problem, just to let anyone know if they have the same issue.
When you are requested to enter the pairing PIN, a bit below there is an option to allow the BT unit to download the contacts, which is selected by default as always.
All phones never have a problem with that.
Anyhow, this time I deselected this option and guess what, it instantly connected!
Afterwards I selected again this option in settings and now everything works like a charm, it connects instantly every time and the contacts are properly synced.
Best regards,
T.
Sent from my HTC 10 using Tapatalk

Hi thanito,
Thanks for the hint ! I had the same problem, your comment was very helpful, I could connect my phone. Although phone works fine and contact are correctly synced, I'm not able to connect the device in Media Audio mode.
The Bluetooth in the car shows "Audio connected". In the device I see only Phone Audio and Contact Sharing. I unpaired and paired it again unsuccessfully.
Do you have an idea how to correct the problem?
Thanks for your help
Fred

Do you have the same car kit unit? Did you try to enter the settings of the paired device and select media audio?
Sent from my HTC 10 using Tapatalk

thanito said:
Do you have the same car kit unit? Did you try to enter the settings of the paired device and select media audio?
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Hi, yes is the same car kit. It went suddenly wrong, I didn't change any settings. I tried to unpair and pair it many times.
When I'm pairing the device I can't select media audio. I'm only asked if I agreed to sync the contacts.
Something strange: when I get a call whatsapp, Soma or Google Duo, I can hear it trough the car Bluetooth for few second then it cuts.
I don't see how to add the Media Audio to a paired device.
Moreover, I don't have Media Audi problem when I connect the HTC10 to the MINI Bose Bluetooth. It works perfectly
Car kit works properly with my Samsung S6 Edge: Phone Audio, Audio Media & Contact sync.

FredMD11 said:
Hi, yes is the same car kit. It went suddenly wrong, I didn't change any settings. I tried to unpair and pair it many times.
When I'm pairing the device I can't select media audio. I'm only asked if I agreed to sync the contacts.
Something strange: when I get a call whatsapp, Soma or Google Duo, I can hear it trough the car Bluetooth for few second then it cuts.
I don't see how to add the Media Audio to a paired device.
Moreover, I don't have Media Audi problem when I connect the HTC10 to the MINI Bose Bluetooth. It works perfectly
Car kit works properly with my Samsung S6 Edge: Phone Audio, Audio Media & Contact sync.
Click to expand...
Click to collapse
Check the photo attachments to see the option in settings ?
Sent from my HTC 10 using Tapatalk

thanito said:
Check the photo attachments to see the option in settings
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Hi,
See my picture: Audi... = Car Kit, MINI Bose = Music Bluetooth player.
In the options for the paired Audi, I don't have Media Audio and can't select this option. few weeks ago it was ok and suddenly, the Media Audio option disappeared. I can't set it again.

FredMD11 said:
Hi,
See my picture: Audi... = Car Kit, MINI Bose = Music Bluetooth player.
In the options for the paired Audi, I don't have Media Audio and can't select this option. few weeks ago it was ok and suddenly, the Media Audio option disappeared. I can't set it again.
View attachment 3866658
Click to expand...
Click to collapse
I see..
Did you try unpairing/deleting stored device from both devices?
Usually in factory car kits you get the option to delete the paired device from the memory.
When done, try to find again the phone from the car kit or the car kit from the phone, uncheck the option for the contacts, then recheck it and hope that you are asked to allow media audio access, contact access, etc. I remember that I am prompted for these every time I pair the phone with a new BT device
Sent from my HTC 10 using Tapatalk

thanito said:
I see..
Did you try unpairing/deleting stored device from both devices?
Usually in factory car kits you get the option to delete the paired device from the memory.
When done, try to find again the phone from the car kit or the car kit from the phone, uncheck the option for the contacts, then recheck it and hope that you are asked to allow media audio access, contact access, etc. I remember that I am prompted for these every time I pair the phone with a new BT device
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Hi, I tried all options, pairing/unpairing/deleting devices, etc... no way.
I finally decided to reset (factory) my phone HTC10...
Now it works fine, Phone Audio, Media Audio & Contacts Sync options are visible and connected successfully...
Many thanks for your support

Help me with my Dasaita PX5 MTCE 8.0 Unit

Hi XDA Gurus,
Recently purchased a Dasaita MTCE PX5 unit running Oreo 8.0. Upgraded to the latest MCU and software package straight away.
I just have a few issues and some advice that I was hoping to get from you guys.
Issues that I have..
1. Radio app or easy connection auto launches when I boot up my head unit - Is there anyway I can disable this.. searched and found a thread that mentions downloading startup manager and disabling it from there.
2. When both my OBDLink MX device and iPhone is paired to my headunit via Bluetooth, sound crackles and sometimes my OBD monitoring apps have intermittent disconnection to my OBD. Is this a common issue when 2 devices are paired.
3. Dashcommand app needs to be closed via task killer along with torque before it connects and works properly. Could this also be related to an app like torque auto starting in the background..
Need your recommendations..
1. Should I root my device via kingoroot? What’s the advantages.
2. Should I install Malaysk rom, what are the advantages. If my issues above can be resolved without custom rom I probably don’t need to buy if installing malaysk rom is beneficial then I will go for it.
3. How do I get more control over my device, I feel the settings are too basic for advanced functions.
Appreciate any feedback you guys can give me because I really like my carwebguru interface that I created and if 2 Bluetooth devices paired doesn’t play nice together then I’m happy using the CarPlay dongle that I should be receiving soon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks

KidCastro said:
Hi XDA Gurus,
Recently purchased a Dasaita MTCE PX5 unit running Oreo 8.0. Upgraded to the latest MCU and software package straight away.
I just have a few issues and some advice that I was hoping to get from you guys.
Issues that I have..
1. Radio app or easy connection auto launches when I boot up my head unit - Is there anyway I can disable this.. searched and found a thread that mentions downloading startup manager and disabling it from there.
2. When both my OBDLink MX device and iPhone is paired to my headunit via Bluetooth, sound crackles and sometimes my OBD monitoring apps have intermittent disconnection to my OBD. Is this a common issue when 2 devices are paired.
3. Dashcommand app needs to be closed via task killer along with torque before it connects and works properly. Could this also be related to an app like torque auto starting in the background..
Need your recommendations..
1. Should I root my device via kingoroot? What’s the advantages.
2. Should I install Malaysk rom, what are the advantages. If my issues above can be resolved without custom rom I probably don’t need to buy if installing malaysk rom is beneficial then I will go for it.
3. How do I get more control over my device, I feel the settings are too basic for advanced functions.
Appreciate any feedback you guys can give me because I really like my carwebguru interface that I created and if 2 Bluetooth devices paired doesn’t play nice together then I’m happy using the CarPlay dongle that I should be receiving soon.
Thanks
Click to expand...
Click to collapse
Don't run Dash command and Torque at the same time. This may be causing your Bluetooth problem with the crackling noise. So choose one or the other. I prefer Torque over any other OBD software.
As for the unit running easy connection at startup, once it's started go into the option menu on easy connection and disable the option for auto start.
I'm using a PX5 unit on 8.1 without said problems.
Hope this helps fella.
Sent from my LYA-L29 using Tapatalk

Tbizzness said:
Don't run Dash command and Torque at the same time. This may be causing your Bluetooth problem with the crackling noise. So choose one or the other. I prefer Torque over any other OBD software.
As for the unit running easy connection at startup, once it's started go into the option menu on easy connection and disable the option for auto start.
I'm using a PX5 unit on 8.1 without said problems.
Hope this helps fella.
Sent from my LYA-L29 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply... I’m running them independently, never at the same time... that causes issues for me too.
When I run torque + phone at the same time I get crackling.
Easy connection doesn’t have an option within the app settings to stop it running at startup. Do you mean within App Info in android settings?
Sent from my iPhone using Tapatalk

KidCastro said:
Thanks for the reply... I’m running them independently, never at the same time... that causes issues for me too.
When I run torque + phone at the same time I get crackling.
Easy connection doesn’t have an option within the app settings to stop it running at startup. Do you mean within App Info in android settings?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi
It's in the app itself. I will double check later on mine and post exactly what to do. But being it's only 6.10am and -5 degrees it's too cold to be looking now [emoji3587][emoji3587]
Sent from my LYA-L29 using Tapatalk

Sorry for you, the Dasaita , has audio problems caused by hardware (sound crackles) a lot of us have the same problem (looks like it has a shielding problem on the hardware)
*Wifi had (hiss sounds when downloading from the internet), I solved It changing the horrible wifi antenna.
*Some other has sound crackles when the unit is reading from the usb devices (usb dongles, cameras and other things).
*Some other has blank sound when they are calling from the bluetooth.
*Some other has blank sound and static when playing music.
Till now Dasaitia does nothing to resolve this problems. Almost all PX5 units from diferent brands has the same problem.
Do not try to root, it will kill your device (Dasaitia says that this thing is not rooteable)
Inside the option menu you can turn off the autostart.