Repairing a cracked screen - Sprint LG Optimus G

Well search is down at the moment, so here goes: I have an Optimus G that finally met it's demise. My glass screen is completely shattered but the image underneath is still clear and no discoloration. Obviously it doesn't respond to touch anymore. Do I only need to purchase a digitizer to do the repair or should I get the digitizer+lcd replacement? I just need a simple clarification.

Digitizer and lcd. The lcd on a factory phone is 'glued' to the Digitizer I believe. I couldn't get the lcd off my original evo anyway
Sent from my LG-LS970 using Tapatalk 4

My wallet shed a tear

I guess a new phone?
Sent from my LG-LS970 using xda app-developers app

Swav3y said:
I guess a new phone?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
He might as well. Although I'm sure you can heat and remove the glass to attach a new glass if the LCD is still good, the price on the glass for the LGOG is a bit steep as its not just a piece of glass, its also the digitizer. A big difference from a Galaxy. I can easily get a glass for my Note at like 10-20 bucks and just glue it on and be all set. That is not the case for the Optimus G, the glass works as the digitizer which I'm assuming why it's a bit expensive.
Edit: I just looked into it some more and it definitely is a complicated task. In all the how to vids they replaced the whole thing, glass and LCD. I guess that's why it's hard to find just the glass. Most sellers sell the glass and LCD together already.
Edit # 2: I finally found just the glass for $38. It actually was 80 last night but I guess the seller dropped the price.
http://pages.ebay.com/link/?nav=item.view&id=181219758562
^^^That's what you need. However if you do attempt it be aware that there's no how to videos on separating the glass from lcd. So after heating up the phone to remove it from the housing you're more than likely going to have to reheat the screen again to begin the glass/LCD separation. Oh and you might need some LOCA adhesive and a UV light to bond the new glass in.
Sent from my SPH-L900 using xda app-developers app

you need both >> however i would go for an OEM one ....
i bought a cheap one from china, the ones without the LG logo on top, and it sucks. There is like a small strip that doesnt respond to the touch, its fine because i didnt notice until i started playing with "sketchbook mobile" but still. and it you look at it at an angle through the light its not smooth and perfectly straight like the original one, AND when you tap SLIGHTLY hard .. you see that liquidy effect ... not cool! .. not annoying either .. just a heads up if you do decide to fix it>
Kiresu said:
Well search is down at the moment, so here goes: I have an Optimus G that finally met it's demise. My glass screen is completely shattered but the image underneath is still clear and no discoloration. Obviously it doesn't respond to touch anymore. Do I only need to purchase a digitizer to do the repair or should I get the digitizer+lcd replacement? I just need a simple clarification.
Click to expand...
Click to collapse

Related

ok i need your help . Galaxy Nexus Screen scratch. can i replace the digitizer

Hi.
my question says it all.
i have a perfect galaxy nexus screen. no weird grid. no weird uneven colors. nothing. just perfect. however, i have few scratches by mistake on the screen " digitizer it self "
is it possible to replace the digitizer without replacing the screen ? money isnt an issue even if its the price of a new phone. its just i have OCD and i do like my screen perfect.
so . is it possible to replace the digitizer alone ? " even if i have to buy them both lcd screen and digitizer ", i will keep the new screen extra for future
I don't think the digitizer is up for sell separately yet.
Sent from my Galaxy Nexus using XDA App
Smokeey said:
I don't think the digitizer is up for sell separately yet.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
thats fine BUT if i buy the sceen and the digitizer, can someone seperate them and install the digitizer on another screen ?
ll_l_x_l_ll said:
thats fine BUT if i buy the sceen and the digitizer, can someone seperate them and install the digitizer on another screen ?
Click to expand...
Click to collapse
I've read that the glass is fused to the housing and display but I'm interested in this as well as I have a spec of dust under my screen.
Sent from my Galaxy Nexus using xda premium
ll_l_x_l_ll said:
Hi.
my question says it all.
i have a perfect galaxy nexus screen. no weird grid. no weird uneven colors. nothing. just perfect. however, i have few scratches by mistake on the screen " digitizer it self "
is it possible to replace the digitizer without replacing the screen ? money isnt an issue even if its the price of a new phone. its just i have OCD and i do like my screen perfect.
so . is it possible to replace the digitizer alone ? " even if i have to buy them both lcd screen and digitizer ", i will keep the new screen extra for future
Click to expand...
Click to collapse
I'm unable to post links yet, so go to iFixit and search for "Galaxy Nexus teardown". Seems the screen and digitizer are fused together, sorry
ll_l_x_l_ll said:
...money isnt an issue even if its the price of a new phone...
Click to expand...
Click to collapse
Buy a new phone, keep other as a backup/media device?
zeekiz said:
Buy a new phone, keep other as a backup/media device?
Click to expand...
Click to collapse
like i said, i am OCD. i go buy new one, i will look for dead pixels/ un even colored screen/ stupid grid that shows weird lines in weird positions of the screen. its like hell for me to go through all that again.
firephoenix1985 said:
I'm unable to post links yet, so go to iFixit and search for "Galaxy Nexus teardown". Seems the screen and digitizer are fused together, sorry
Click to expand...
Click to collapse
i did go to that site before you post it. thanks for trying to help. however i am just wondering that even if they are fused together, can i still take them apart ?
i really dont want to lose that screen
Hopefully the overall quality will improve with the samoled displays in the near future and buying a replacement housing/digitizer will almost guarantie you a good result (dont hold me to it though, just wishfull thinking).. i have some micro scratching aswell (seems to be a normal problem with this device) but only really visable under a really strong super-led flashlight. I'm starting to feel ok with it however and decided to wait with getting a replacement till the price has gone down.
Sent from my Galaxy Nexus using xda premium
I read that one of the members here used a blow dryer on the screen and used a suction cup to remove the screen on their Galaxy S II. If these two devices were constructed similarly then this method may have some merit.
Sent from my Galaxy Nexus using xda premium
the "super" in super amoled means the digitizer and screen are fused together.
i dropped my phone from about 3 feet and broke under my screen but not the screen itself can anyone recommend a good company to buy these parts from??
There's a guy from HK selling it on eBay here. However that means that you'd need to change it yourself. I have looked at the ifixit website about the assembly of the device; however it depends on how comfortable each one is with changing it themselves.
It is quite expensive as well... I will still get a quote from Samsung prior to venturing with this option.
---------- Post added at 09:23 AM ---------- Previous post was at 09:15 AM ----------
To the OP
Where are you getting the digitizer from? If it is sold as fused with the screen, then there's not much trying to tear the combo apart and getting it to look like a machine job will be a challenge. I assume you'd need to build a clean room setup somehow...
Anyways you could possibly verify if the screen quality is to your standards with the eBay seller I mentioned above and buy on that arrangement; however getting the other side to agree/be honest may not be easy.
Instead, why not buy the best screen protector? Those wet ones you get nowadays. Not only will it get rid of the scratches but will also protect your phone for a long time...I think that is a better cheaper investment unless you are sitting on a pile of....cash...
Tjotte said:
Hopefully the overall quality will improve with the samoled displays in the near future and buying a replacement housing/digitizer will almost guarantie you a good result (dont hold me to it though, just wishfull thinking).. i have some micro scratching aswell (seems to be a normal problem with this device) but only really visable under a really strong super-led flashlight. I'm starting to feel ok with it however and decided to wait with getting a replacement till the price has gone down.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I have since this post received 2 more scratches and both is showing quite easy with screen off in normal lighting, last one i got today and that oneĀ“s really bugging me since it looks like something rubbed against the screen a few times.. I always.. always always! only keep my phone in my pocket on my jacket with a plastic zipper and only a microfiber cloth goes in the same pocket.. digitizer actually feels weaker then my old X10's which (apart from that i dropped it and cracked a corner a month before getting the GN) looks rather good to have been tossed around and been riding my workpants which has been everything BUT clean.. a few deep scratches but 18 months of abuse, i'd say it's in good condition! I refuse to put a screenprotector on this phone, initially i did get one.. that one scratched during installation using a regular creditcard and it just looked terrible with the peeling around the edges so, no more protectors.... and i (along with other here at the forum) believe that it is not actually the glass that scratches but rather the oleophobic coating getting scratches.. because the scratches are really really thin but clearly visible.. it's a shame.. but when the next scratch comes, i'm gonna stop being anal about it and just toss it in my right jeans pocket where the phones usually go.. never in my workpants though.. that would kill the coating in a day.

Replacing Broken Glass

Hi all
I have a cracked screen on my Galaxy Nexus and want to replace it.
I know the digitizer is stuck to the glass but I've watched a video on YouTube and with a bit of time and patience it should come apart.
Has anyone successfully replace the glass and only the glass on the Galaxy Nexus?
I've seen some replacement glass on eBay for around $20 which doesn't seem too bad. But I want to know when you remove the old glass which would remove the glue holding the old glass on, do I need any glue to stick the new glass on and where would I find this so called glue?
I bought a used broken galaxy nexus off ebay that also has this issue and I am probably gonna try and fix it eventually. I ordered replacement glass off ebay for 15 dollars and its coming with little tools for the job aswell.
Did it come with stuff to stick the glass back on :s
I will probably pick it up on Monday so I can check then.
Sent from my Galaxy Nexus using xda app-developers app
I did the same thing. Found a nexus on ebay for 40 bucks with a cracked screen. Phone works perfect, I ordered replacement glass only and and I'm just way nervous to do it.
Sent from my Galaxy Nexus using xda premium
Any luck with this repair? It seems like there are people who say it can't be done and some who say it can. I've watched some videos on this topic as well but they never really show how to put the glass back on without getting air and dust trapped in between the digitizer and the glass.
chipzdelux said:
Any luck with this repair? It seems like there are people who say it can't be done and some who say it can. I've watched some videos on this topic as well but they never really show how to put the glass back on without getting air and dust trapped in between the digitizer and the glass.
Click to expand...
Click to collapse
I had the same issue with my Gnex, but after talking to private service guy,I replaced complete digitiser together with glass. The reason was simple.
As I get info from that guy, you will never be able to protect any dust to stay at digitiser area, so after some time phone will not recognise some touches,because of glue has to be used and it is not easy to cover complete area,that is why probably dust will come inside.
Anyway,those are informations I get from guy who is servicing/repairing all kinds of mobile phones, so this was his opinion and maybe there is better way,how to solve it.
I wish you good luck
It didn't come with glue .
I found this http://www.amazon.com/gp/product/B004WIQW3U/ref=oh_details_o00_s00_i00 which seems like the right thing to me.
Sent from my Galaxy Nexus using xda app-developers app
so did anyone successfully replaced the glass?
I found good deal in Amazon and not sure if this is going to work!
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
sdhanush1 said:
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
Click to expand...
Click to collapse
do you have an intact glass?
the.lirius said:
do you have an intact glass?
Click to expand...
Click to collapse
I had... Sold it already... I remember seeing one in eBay UK website you may want to try there.
Sent from my awesome Xperia Z
sdhanush1 said:
I had... Sold it already... I remember seeing one in eBay UK website you may want to try there.
Sent from my awesome Xperia Z
Click to expand...
Click to collapse
ty mate.. i will seriously think about it :good:
Any word on replacing the glass? I've been watching some videos about the process that includes everything except the regluing.
I found one video on the regluing process, but it shows the replacement in an industrial factory setting with an industrial autoclave vacuum to remove any air bubbles present.
I have also seen people on the YouTubes use 3mm wide double sided tape around the entire perimeter of the phone to reduce dust, but I can see potential issues with this method, as the factory method seems to apply a solid layer of adhesive material.
I would like to hear success stories, but I'm inclined to pop this thing open and give out a shot.
Sent from my Galaxy Nexus using Tapatalk 2
advise
sdhanush1 said:
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
Click to expand...
Click to collapse
I thought the glue is not a must have parts,but samsung wont put the glue on without any reason. what i know about the glue is it will make ur glass much harder...

Screen replacement

Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
BWolf56 said:
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
Click to expand...
Click to collapse
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the screen usable? Any color/light bleed? Or color distortion/fading?
BWolf56 said:
If the screen usable? Any color/light bleed? Or color distortion/fading?
Click to expand...
Click to collapse
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Check out this thread for replacing your screen
http://forum.xda-developers.com/showthread.php?t=1945494
I highly recommend against trying to replace just the glass. That is what I tried to do, but the LCD is glued to the digitizer which is glued to the glass. I didn't use enough heat and though I got through the edge tape holding the glass to the frame, I shattered the digitizer and LCD as well as busted through the menu buttons.
If you think you can do it, go for it. Not real tool intensive, but there will be lots of heat and the success rate is probably 50/50.
The next step from that is to replace the whole LCD/DIGITIZER/GLASS. But that will set you back around $200. Same process, but you pretty much scrape the glass, digitizer and LCD from the metal frame. Lots of effort, lots of time, and little pieces of glass flying everywhere.
For about the same price, get the FRAME/LCD/DIGITIZER/GLASS asssembly. It only requires removing a few screws, unhooking a couple of cables, and replacing the hole front end. It can be done with care in about 15 minutes.
If you do that, be sure you get the right model number. If you are on AT&T in the US, you'll need the i747. The i9300 may come up a few bucks less, but it's not compatible. Color doesn't matter - you can change now, if you want.
The biggest disadvantage of removing the glass only is the risk of getting dust inbetween the LCD and the glass front. With the other two methods, the LCD/DIGITIZER/GLASS are already fused together. However, if you pull it off, no one will ever know you messed with it, and the warranty cheat won't be tampered with as it will be with a frame replacement.
According to the other post, you are still 13 months from an upgrade. That means around $450 to replace your S3 and $630 if you want to go the S4. For less than half that, you can get the frame replaced. I might even suggest that once you replace the frame, you spend that $10 to replace the glass and try it without any fear of consequences on the one you remove. If you do it well, you might could sell that assembly for $150-$200.
Good luck!
i9300 screen (no frame) will fit i747 frame
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
k2lc said:
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
Click to expand...
Click to collapse
Lcd, digitizer, and glass are all identical except color. Once you see the word "frame", the model matters.
I just recently did this successfully. The key is a good source of heat and patience. I used a heat gun and it took me about thirty minutes to do. There are screens you can order that come with the little tools to use. Start heating it slowly and use the tools to take the glass off. Heat it until its relatively easy to get the glass off but do not over heat it! Keep going until all the glass is off. Once its off, apply some sticky tape (or you can use the tape that was already on the phone if you don't destroy it) and it will be good to go. Make sure that you take the protective paper off the glass you ordered.
Should you have any issues feel free to PM me.
Sent from my SAMSUNG-SGH-I747 using xda premium

parts for galaxy s3 L710 and how to replace them

as many of you may know the glass on the galaxy s3 l710 not sure about the other models is not drop proof I think its just a scratch resistance glass not drop resistance glass I've seen many of post and youtube videos where folks have dropped there phone including me. and get crazy quotes to replace it. so I went digging for other options. first a little over view on the hardware of the phone there is the glass, touch screen digitizer,middle chassis, components that sit on the back of the middle chassis including mother board etc. and then the back cover.
the below youtube video shows how to take phone apart, its not hard just make sure u have the right tools. (very fine phillips head screw drivers etc)
https://www.youtube.com/watch?v=lHELvmoX0NY
this video explains why its wiser to go with the replacement touch screen digitizer assembly replacement vs glass replacement if done wrong you can brake the digitizer so best bet go with the digitizer assembly replacement.
https://www.youtube.com/watch?v=bkQZHU-SRC8
now here is what I call the exciting part, I have been hearing crazy prices for the touch screen digitizer between 300 and 500 dollars which is funny to me because the phone does not cost that much so the link below is to a website that sells parts for the phone at a very low prices.
http://www.aliexpress.com/wholesale/...30&groupsort=1
I see as low as 112 bucks. I ordered from the alieexpress before some of them ship the tools you need to disassemble the phone. I well be ordering my touch screen digitizer screen for the l710 in a week or two I'll keep you posted on the switch out. I cant wait to get it done I know a couple of phone part venders in the mall who swear you need to go the route with the heat gone etc and they can do it for me for 300 dollars yea right lol
Do you know of a place to get parts for the E4GT? I have a perfectly functional E4GT but it has a broken digitizer. The outer glass itself doesn't even have a scratch
CNexus said:
Do you know of a place to get parts for the E4GT? I have a perfectly functional E4GT but it has a broken digitizer. The outer glass itself doesn't even have a scratch
Click to expand...
Click to collapse
They actually have all parts check them out
arcolino1 said:
They actually have all parts check them out
Click to expand...
Click to collapse
Awesome, thanks
EDIT: Also just a heads up, you linked the website wrong, it leads to a 404 on their site
Try repairsuniverse.com/
Sent from my SPH-L710 using XDA Premium 4 mobile app
gronimo21 said:
Try repairsuniverse.com/
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
aliexpress.com
has way better prices, lowest I saw on the repairsuniverse.com for the s3 touch screen digitizer was 169.00
but your post made me do a random google search for samsung galaxy s3 touch screen digitizer and I
am seeing even lower prices on other websites. and the sellers have good ratings. Interesting.
That site is also from Hong Kong and it goes by alibaba.com I've order from here before everything came as is yes it's a bit higher but it's oem
Sent from my SPH-L710 using XDA Premium 4 mobile app

Replacement screen

What is the best site to get a replacement screen from? My digitizer is fine, just need the screen
Ouch!
Found one for 15, going to two tone my note 4
n00b1269 said:
Found one for 15, going to two tone my note 4
Click to expand...
Click to collapse
Where did you find it?eBay?post a link and let us know after you install it if you recommend it,I like to have a back up screen laying around haven't seen any post on replacing one on note4 yet,surprisingly I havent had to replace a Samsung screen yet had s3,4,5,and now note4,I did replace the camera glass on S5 and the charging flap,got them from some site they came from Hong Kong or something but were OEM and cheap.
http://www.hytparts.com/005521-oem-replacement-outer-glass-lens-for-samsung-galaxy-note-4.html
n00b1269 said:
http://www.hytparts.com/005521-oem-replacement-outer-glass-lens-for-samsung-galaxy-note-4.html
Click to expand...
Click to collapse
Nice that looks legit,please post back and let me know how long it took to receive it and what your thoughts are on it.
Will be ordering Thursday, there are four color options. I have the white, I'm going to do the black glass, with the white and chrome and black back I think.
That will look good,I have the white s3,black s4,white s5, I use all dark backgrounds if there's an option and dark wallpapers with the black note4, it just looks nicer to me, that's why I got black this time,but I'd put the white back on myn,I actually never saw the white one in person to be honest I'll have to take a look.
Good luck swapping just the glass, its fused to the digitizer.
deathshead said:
Good luck swapping just the glass, its fused to the digitizer.
Click to expand...
Click to collapse
Can you elaborate,are you saying its impossible to replace just the screen and he will need to replace the digitizer also with one that has the screen fused to it?
djmouse said:
Can you elaborate,are you saying its impossible to replace just the screen and he will need to replace the digitizer also with one that has the screen fused to it?
Click to expand...
Click to collapse
Sorry ididnt provide much detail but theres a video on youtube with a repair guy and he attempts to do a glass swap and breaks the digitizer from it being fused like the s3
djmouse said:
Can you elaborate,are you saying its impossible to replace just the screen and he will need to replace the digitizer also with one that has the screen fused to it?
Click to expand...
Click to collapse
I'm sure Google can elaborate also.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Martinjv71 said:
I'm sure Google can elaborate also.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
Thanks,were not here to be negative were here to learn and share,maybe he had a hands on experience, that's better then googling something most times, I already saw a tear down of the note4 but not the screen being taken off the digitizer but thanks again for being so helpful.
deathshead said:
Sorry ididnt provide much detail but theres a video on youtube with a repair guy and he attempts to do a glass swap and breaks the digitizer from it being fused like the s3
Click to expand...
Click to collapse
Don't you just heat it like the rest to separate it? I assume its no different then replacing note 2 or 3 glass...
Sent from my SAMSUNG-SM-N910A
bordman said:
Don't you just heat it like the rest to separate it? I assume its no different then replacing note 2 or 3 glass...
Sent from my SAMSUNG-SM-N910A
Click to expand...
Click to collapse
That's the problem. I don't think you can. I'm paying $75 to get it fixed.
A blow dryer did the trick
n00b1269 said:
A blow dryer did the trick
Click to expand...
Click to collapse
Got pics?
How did it turn out and where did you get the parts?
I don't have pics, I sold it literally the moment it was fixed. But I can say, the kit was 11.95 with amazon prime shipping. It was for the 910. The glass was cheap, but usable and came with tools. This lit used double sided tape, not loca and the glass didn't have a logo. I two toned it. I thought it would look better but just looked like knock off. But hey my buddy slapped down $690 and said he wants it so no complaints
Basically the concept is heating the glass so the adhesive between the digitizer and glass can be loose or let's say workable. I did this on my Galaxy Note 1 but kinda screwed up a bit. Trying to separate the glass from the digitizer is a pain on the butt because with what ever you use to separate it you can also risk scratching the digitizer. Also do not overheat as it can mess your screen up bad. Let's say all the job is cleanly done and you separated the glass still with the adhesive on the digitizer, put the new glass on the screen and with the heat gun/hair dryer put some heat on the glass to get the adhesive back to stikn mode. This is a simple but yet risky fix. In my experience with a new phone I'd pay the amount to get the screen fixed though idiots here in Georgia will try to rip you off saying you need a new digitizer as well. Hope it gives you a bit of info though look for vids about this before attempting on your own note 4
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
They give you a clear wire between two rings to separate the screen. It was quite easy. Bunch of glue left over but rubbing alcohol and a light touch took care of that. The trick was to have someone else heating as you slowly work it. I think the fix would of looked a bit better with loca I feel.

Categories

Resources