Hi all.
Had this unit for about two weeks. I've read various blogs / posts regarding OTG and I bought two cables from Monoprice. When I tried to connect either the PS3 controller or USB flash drive, the device doesn't recognize it.
I downloaded USB Host Controller and it has a message "S3C USB Host driver NOT found". A lot of sites show connecting a PS3 controller is fairly easy but I can't get this to work.
I'm on 4.3, not rooted. I'm not sure what I'm supposed to do. Do I have to root the device to get this to work?
Note no issues with USB charging. When I plug in to a laptop it does show up as a "media device". When I plug in the OTG cable I have no notification message.
I also have a S4, and when I plug in the same OTG cable, I can see a message 'USB connector connected" on notification. But I can't see the same message when i plug in my Nexus 7 2nd Gen.
Is this a common problem? Thanks in advance.
I am use star print and connect to a HP fax combo works fine. Need check USB debug in Dev option s. Noon rooted . also use otg explorer to play movie s I f a San disk 6Gb USB thumb. Both apps are $2.99 but. The lite version work great for testing
Sent from my Nexus 7 using xda app-developers app
Related
Hello all,
I received my USB adapter from Samsung today and am pleased to inform you that it works wonderfully with a USB hub. My hub has 4 slots on it and the tab was playing well with multiple USB devices being plugged in.
Really? I guess usb hub is needed to make things work? i had all kinds of issues. Mainly, not reading some usb drives, and memory reader. I just plugged the usb drive, directly into the usb adapter. The memory card reader was connected by standard usb to mini usb cable. That didn't work.
I got to try this.
Thanks.
No problem. I actually have not tried storage devices yet, only input devices. I posted on your other thread as well.
I have a feeling thumb drives may be having a problem if they are formatted in the FAT32 file system. I am going to try an NTFS drive and external hard drive and will let you know my results.
UPDATE: It appears I had it the other way around. I plugged in an NTFS drive to no avail, then formatted it to FAT32 and it worked.
FAT32 works great. NTFS is completely missing from stock kernels, it's in pershoot's "lib" extra modules archive on his kernels. However, I tried an NTFS drive using the extra module and it failed. (might require some manual mount magic???) It would take a lot more work to get FUSE working properly, and that's needed for the (vastly superior) ntfs-3g driver.
So does it work with external usb hard drives (both self powered and plug powered) of the sizes of 500GB and more?
what brand/type
what brand/type of usb hub do you have
Invisman said:
So does it work with external usb hard drives (both self powered and plug powered) of the sizes of 500GB and more?
Click to expand...
Click to collapse
If the hub is powered then the drive should work fine. You just can't use a usb powered drive without a power source
Sent from my SCH-I500 using XDA App
Ican't get mine to read my game controllers. Says something about high powered device. It won't let me read the message. When I tap it to make it bigger it just goes away. I am very frustrated. Can you get a fame controller to work? I used ps3.
Sent from my PC36100 using XDA Premium App
Shadee1394 said:
Ican't get mine to read my game controllers. Says something about high powered device. It won't let me read the message. When I tap it to make it bigger it just goes away. I am very frustrated. Can you get a fame controller to work? I used ps3.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
PS3 controllers require a special driver. It may also require too much current since it tries to charge via USB. You'll need a powered hub if that is the case.
Gonna try my PS3 controller in a few minutes.
Edit: So far:
No excessive current errors from my PS3 controller - however mine has a fully charged battery because it's been plugged into a PS3 that has only been playing movies/videos for weeks. However button presses aren't recognized by anything. My guess is that if I dmesg I'll get an unrecognized device error. PS3 controllers are nonstandard.
However a Nyko AirFlo controller worked fine in SNES9x EX. It was semi-recognized by SNESoid - the keymap screen recognized something was being pressed, but games themselves wouldn't register presses.
Edit 2: PS3 controllers require the hid-sony kernel module to be loaded. This is included in pershoot's optional "lib" archive with his kernels. I had to hit the PS button to get it to turn on and start sending presses to the tab. No excessive current errors, but my controller was fully charged.
Thanks. But for some reason the ps3 and the x box controller worked for the xoom. I called samsung and they don't have any help for this issue yet. Can you get any external device to work for at least over fifty percent of what the adapter is meant to do? Did you get any error messages. I get high powered device connected. Then it say underneath that out could not connect. Device needs............. I cant read the rest. When I tap it to enlarge and read it disappears. Samsung can't figure out why that is happening either. Plz help.
Sent from my PC36100 using XDA Premium App
Shadee1394 said:
Thanks. But for some reason the ps3 and the x box controller worked for the xoom. I called samsung and they don't have any help for this issue yet. Can you get any external device to work for at least over fifty percent of what the adapter is meant to do? Did you get any error messages. I get high powered device connected. Then it say underneath that out could not connect. Device needs............. I cant read the rest. When I tap it to enlarge and read it disappears. Samsung can't figure out why that is happening either. Plz help.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Make sure the PS3 controller is fully charged before you connect it. If it isn't, it'll try to charge the battery and that's probably what sets off the overcurrent protection.
As to it working with the Xoom - I'd be VERY surprised if it worked with the Xoom when stock. Not so surprised about custom kernels, adding those modules is one of the first things people add, and the Xoom guys may have figured out module autoloading.
Thanks going to try now
Sent from my PC36100 using XDA Premium App
nothing over 32GB for now
Kevin Gossett said:
If the hub is powered then the drive should work fine. You just can't use a usb powered drive without a power source
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
wish i'd have read this before i bought it. i assumed it would since every other android tablet i have/had can power my external hds. pretty much makes it useless for me now as i was hoping to use it as external storage and for easy, quick file transfers. tf, xoom, and archos all work fine.
Entropy512 said:
As to it working with the Xoom - I'd be VERY surprised if it worked with the Xoom when stock. Not so surprised about custom kernels, adding those modules is one of the first things people add, and the Xoom guys may have figured out module autoloading.
Click to expand...
Click to collapse
It works on a stock 3.1 build, it was one of those new features hyped at google i/o. I have both the European XOom and the Galaxy tab. The xoom copes fine with the ps3 and my other usb only non brand gamepad. The galaxy tab give me the hipower usb device error.
Entropy512 said:
...
However a Nyko AirFlo controller worked fine in SNES9x EX. It was semi-recognized by SNESoid - the keymap screen recognized something was being pressed, but games themselves wouldn't register presses.
...
Click to expand...
Click to collapse
For SNESoid, you probably forgot to go into the other settings menu and turn on external input. The names may be off, but in addition to setting the key mappings, you have to turn on another option for it to see additional input devices, and then your gamepad will work
poorlilpoop said:
Really? I guess usb hub is needed to make things work? i had all kinds of issues. Mainly, not reading some usb drives, and memory reader. I just plugged the usb drive, directly into the usb adapter. The memory card reader was connected by standard usb to mini usb cable. That didn't work.
I got to try this.
Thanks.
Click to expand...
Click to collapse
I had troubles reading an SD card with an old USB reader I had lying around. It was hit and miss.
Then I bought this SD card reader at Fry's for $4.99 and it works perfectly.
So, just to be clear, you are using a male A-A USB cable with one end plugged into the USB adapter on the GTab and the other end into one of the available USB ports in the hub, right?
Hey guys
So basically I have a Sony Handycam DCR-HC19E camcorder, and was wondering if i plugged it into my galaxy tab using the samsung usb adapter thing, will it recognise it and allow me to take and transfer files to and from the tab?
As i want to upload some videos to youtube but it wont work on my computer?
So im basically asking if anybody has got mass storage access to devices they have plugged into the tab 10.1
Thanks in advance for any help
Adam
I have a Sony dcr-sr100. It mounts to my galaxy tab 10.1 on stock firmware.
I have found that " high" powered USB devices are rejected by this tab, which is annoying. But i have found that how you connect the devices matter also.
E.g. if the adaptor is plugged in then i use my USB drive to the adapter is does not work.
If my USB drive is plugged into the adapter then into the tab it usually works, if not pull out and try again right away.
If you can get a powered USB hub, this will help for connecting more devices. Generic keyboard & mice work fine ( if not " high" powered)
USB mass storage otg app in the market will help to mount more drives at once and enable access to NTFS formatted drives which are not supported on the stock firmware.
Sent from my GT-P7510 using XDA
brb8two said:
I have a Sony dcr-sr100. It mounts to my galaxy tab 10.1 on stock firmware.
I have found that " high" powered USB devices are rejected by this tab, which is annoying. But i have found that how you connect the devices matter also.
E.g. if the adaptor is plugged in then i use my urban drive to the adapter is does not work.
If my USB drive is plugged into the adapter then into the tab it usually works, if not pull out and try again right away.
If you can get a powered USB hub, this will help for connecting more devices. Genetic keyboard & mice work fine ( if not " high" powered)
USB mass storage app in the market will help to mount more drives at once and enable access to NTFS formatted drives which are not supported on the stock firmware.
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
Thanks for all this info!
So would u recommend getting a Samsung USB adapter thingy and them trying from their?
Sent from my GT-I9100 using xda premium
This is the one I got.
http://dx.com/p/106541?r=78454077
I don't see much point paying more than this.
Also the " card reader" versions are designed to only mount one card at a time since that is how the stock device handles otg. But if you already have USB card reader your happy with, it can be used with USB mass storage OTG app from the market. ( Which also adds NTFS support).
Sent from my GT-P7510 using XDA
Sprite cheers. I may just get a 3 pound one off Amazon, then see if it works
Sent from my GT-I9100 using xda premium
I got the corded version, as I thought it was more risky using the "Block" style one that might break the connector 30pin if it was knocked too hard.
There is rick of the corded version breaking on the cable, but it is a cheap replacement fix.
Sent from my GT-P7510 using XDA
i need to connect the high powered external 1 TB hard drive
yogeshmha said:
i need to connect the high powered external 1 TB hard drive
Click to expand...
Click to collapse
Ok, what information do you need?
You have made a statement but not asked a question. Answers to your statement have been covered above also.
Sent from my GT-P7510 using XDA
I have a tmobile sgs3 with a stock rom (it was rooted, but latest update seems to have killed that), and after seeing the androidNZ connectivity demo I decided to play around with the usb otg. I am having some problems however. I have tried with 2 external hdds and a thumb drive and all three light up, but do nothing to the phone. I get no pop ups, and when I use astro to check the external usb drives, they all show up empty.
What am I missing?
Thank you!
I do not have that issue, but did you check USB debugging mode in Developer options?
I haven't tried to connect to an external HD, but USB Flash card works fine, as well as USB keyboard & mouse.
I've bought a $2 USB adapter for my phone and I have been able to mount a pendrive or a HD (when it is plugged to an external power source).
But when I try to connect a Mouse, Keyboard, Gamepad, etc., nothing happens. Not even an error message.
I'm using an official Android 4.03 rooted ROM (Claro Argentina).
Does anyone know what could be happening? The problem is my ROM (and it's drivers)? Is my USB otg adapter that is not compatible with mouse and keyboard?
I attach a screenshot of my system
img.tapatalk.com/bef728f6-6c26-6964.jpg
Thanks!
Sent from my GT-I9100 using xda app-developers app
Using usb host controller app.
Got a 5 pin usb otg cable, plug it in and it says "
s3c usb host driver not found!!! Root hub is not present, usb host mode not active or not avalible!"
in the app, i plug the cable in and it does say its connected in the status bar.
Any ideas, its the galaxy s2 from boost mobile, rooted, seen it work on the same phone on youtube and a few places, pretty sure its something simple. thanks in advance ^^
LinkKokiri83 said:
Using usb host controller app.
Got a 5 pin usb otg cable, plug it in and it says "
s3c usb host driver not found!!! Root hub is not present, usb host mode not active or not avalible!"
in the app, i plug the cable in and it does say its connected in the status bar.
Any ideas, its the galaxy s2 from boost mobile, rooted, seen it work on the same phone on youtube and a few places, pretty sure its something simple. thanks in advance ^^
Click to expand...
Click to collapse
The E4GT is not capable of OTG. It has been brought up many times. It seems to be a kernel problem.
Is there a way to get midi input recognized on our phones? On my pc I use the rock band 3 keytar connected via a midi to usb adapter and I can do midi playback.
Is there a way to do this on our phones via an otg cable?
EDIT: got it done! check my post below.
Sent from my SPH-L900 using xda premium
Re: Possible to get midi input to our phones?
Seems like I found qhat I needed. Will try it tonight and report.
https://play.google.com/store/apps/details?id=com.als.grandpiano.pro
Sent from my SPH-L900 using xda premium
it works beautifully and way easier than I expected.
connected my otg cable and the phone said usb connector connected (since when is this a thing!?), plugged in the midi-usb adapter to the otg cable and right away it prompted me to open with the software I linked above and another midi software I had installed.
and bam, it was working. I messed around a bit to find the better settings for my keytar, but this thing works. over Bluetooth and with the headphone plug. there's a little bit of lag over Bluetooth but for my uses I wanted it straight to the speaker so i'm using the stereo cable. now I don't need a pc to get sound out of the keytar.
mark this as one more day i'm amazed at what my phone can do.
by the way, it functions as a synth using the software I mentioned above, so I can play harpsichord, organ, piano, etc. and the sound keeps on playing even with the screen off.
happy camper = me.
Max_Pain said:
it works beautifully and way easier than I expected.
connected my otg cable and the phone said usb connector connected (since when is this a thing!?), plugged in the midi-usb adapter to the otg cable and right away it prompted me to open with the software I linked above and another midi software I had installed.
Click to expand...
Click to collapse
Looks like you had some luck... Wondering if you can help me?
I am trying to make my Android, Huawei p20 Pro, accept a MIDI signal via USB too.
I have an OTG adapter, and have tested 2 OTG adapters and 2 cords.
All work into my PC (even via an USB type-C to standard USB adaptor )
The issue seems to be that I cannot select the USB in type to be MIDI.
I have also experienced that on another Samsung Galaxy S10
I have tried opening developer settings and changing the setting "Disable USB Audio Routing" ON as per https://help.joytunes.com/en/articles/2636638-troubleshoot-midi-on-your-android-device
I have tried using it with 3 apps that accept MIDI.
Simple Piano by Joy Tunes, FlowKey and USB MIDI Monitor
Any ideas?
Environment
Huawei p20 Pro
Model: CLT-L29
Build: 9.1.0.381 (C782E11R1P11)
EMUI v: 9.1.0
Android v: 9
Similar Posts
https://forum.xda-developers.com/mi-pad-4/help/problem-recognizing-midi-device-t3877082
https://forum.xda-developers.com/oneplus-x/help/midi-usb-mode-paranoid-rom-t3430141