i was installing a rom from recovery and when i formatted system before installing the zip, accidentally have rebooted the phone and now it doesnt pass the sonyericsson logo, What can i do?
esedust said:
i was installing a rom from recovery and when i formatted system before installing the zip, accidentally have rebooted the phone and now it doesnt pass the sonyericsson logo, What can i do?
Click to expand...
Click to collapse
You must flash stock firmware again. You can do it with PC companion or flashing ftf with flashtool. Boot it normally, then root it, and install CWM again.
Recovery mode(CWM)
esedust said:
i was installing a rom from recovery and when i formatted system before installing the zip, accidentally have rebooted the phone and now it doesnt pass the sonyericsson logo, What can i do?
Click to expand...
Click to collapse
Bakisha said:
You must flash stock firmware again. You can do it with PC companion or flashing ftf with flashtool. Boot it normally, then root it, and install CWM again.
Click to expand...
Click to collapse
Bakisha is correct.
But if you flash a kernel that have a CWM support (doom kernel - volume up / Lupus kernel v7 is the search button) then you don't need to re-install the ftf anymore.
You can just manually turn off the phone by removing the battery then boot the phone and use the specific button command to access the recovery mode.
If you still can open cwm, you could mount you sd card and copy the Rom again... You could install it again...
Sent from my MT25i using xda app-developers app
Related
hi!
After installing update-cm-7.1.0.1-Xperia Arc-LT15i I have a problem that vibrate Broken Is there any solution?
Yeah, wait for the update with the fix in it
First backup ur current rom..then flash with .368 den insatl cm 7,it s worked for me..
Sent from my LT15i using Tapatalk
So it means to boot into CWM recovery, wipe all datas, boot and dalvik cache,
power down the phone, use flashtool to flash the .368 ftf file?
after that use flashboot to flash the img file of cwm again?
then go into recovery, wipe all datas, boot and dalvik cache, install cm7 zip from sd card? reboot then go into recovery again to install gapps zip then reboot?
Did I miss anything here?
Yes..then u wil get back vibration..
Sent from my LT15i using XDA App
I tried flashtool on my PC to flash the stock SE .368 rom...it keeps aborting...And because it aborted, the phone can't be switched on...
So I try to flash the .ftf file on another PC, and strangely enough, it flashed without problem...I was able to revert back to .368 rom after that, flashboot the CWM boot.img, rebooted into CWM recovery, wipe data, wipe cache, wipe battery, wipe dalvik...
Installed the CM7.1 rom and GAPPS thereafter...it booted into CM7.1.
Question is...why is it my PC keeps aborting the flashing of the .ftf file?
I am using windows 7 home 64bit.
The other PC that flashed without problem is a windows 7 home 32bit.
If my experience can help people here...thanks.
lowizi said:
Yeah, wait for the update with the fix in it
Click to expand...
Click to collapse
yes that's right no any problem with new KERNEL
http://forum.xda-developers.com/showthread.php?t=1303635
Thanks for all and special thanks for DooMLoRD
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Did u flash the kernel for the ROM u flashed ? The ROM will not boot without its kernel.
Sent from my Xperia Arc S using Tapatalk 2
mtpocketz said:
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Click to expand...
Click to collapse
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Thanks
iwarind said:
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Click to expand...
Click to collapse
Got it - Yes i was installing CWM within stock rom via market. though i tried to install it through adb/windows but still i guess the problem was all about not installing a custom recovery kernel.
Thanks a lot !
Installation aborted error status 7 xperia mini
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
aditya naik said:
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
Click to expand...
Click to collapse
Download stock ROM and install it via Flashtool.
My signature, there is link to download stock ROMs. Search for proper one and install it.
I have a big problem. I had installed 4.04 latest ICS. The I rooted the phone and installed cwm via x-parts from google play. Then I booted to cwm recowery from x-parts. Then I wiped all data and formated System!! I flashed new rom whic was only update not whole rom. I rebooted the phone and now I cannot get into cwm recovery and there is no system! What can I do???
Thank you!
Reflash the stock ROM, and don't wipe data if you install CWM through X Parts.
Sent from myushi
Problem like this
XperienceD said:
Reflash the stock ROM, and don't wipe data if you install CWM through X Parts.
Sent from myushi
Click to expand...
Click to collapse
Hello there, I got the same problem, I have rooted it, and installed remix ice and jelly bean v3. After rebooting it stocked on Sony logo, now I can do anything more, It turn on it selfs, I cant shut down. The pc doesnt recognize it so cant flash other one which works...
Is there any other solution please help
As above, I can only assume that the ROM you installed didn't come pre installed with cwm.
Plenty out there that do....jj's hybrid is nice.
humercab said:
I have a big problem. I had installed 4.04 latest ICS. The I rooted the phone and installed cwm via x-parts from google play. Then I booted to cwm recowery from x-parts. Then I wiped all data and formated System!! I flashed new rom whic was only update not whole rom. I rebooted the phone and now I cannot get into cwm recovery and there is no system! What can I do???
Thank you!
Click to expand...
Click to collapse
Use SEUS to flash stock firmware if you did not unlock bootloader, or flash stock firmware .ftf file with flashtool.
僕のLT18iから送られてきた
Hi,
I have fresh install of latest 4.2.2 android. I am trying to install Philz recovery / TWRP and have tried their latest version and also older version tar files but when after successful flash through ODIN my recovery is back to Android Stock Recovery. I have been trying to get TWRP or Philz recovery but its not happening. My phone is not rooted please guide me how to do it.
Thank you.
Aishwarya Jain
badmaash said:
Hi,
I have fresh install of latest 4.2.2 android. I am trying to install Philz recovery / TWRP and have tried their latest version and also older version tar files but when after successful flash through ODIN my recovery is back to Android Stock Recovery. I have been trying to get TWRP or Philz recovery but its not happening. My phone is not rooted please guide me how to do it.
Thank you.
Aishwarya Jain
Click to expand...
Click to collapse
First install a temperory CWM recovery by Odin and via that install which ever permanent recovery that u want this method helped me and i m sure will help u too.
Hit thanks if it helped
1-Use Root Genius Application to One-click root your Grand i9082 (www.rootgenius.com) it's a windows app, (you need to install Grand i9082's drivers on your PC before rooting)
2-Download the Recovery's image (.img file) and transfer on device's SD card or internal memory
3-Download "Rashr" from Google Play
4-open Rashr
5-Make backup of stock recovery (incase something goes wrong)
6-Click Install recovery from storage
7-Select the Recovery's image (.img file) in Rashr and install your recovery
8-Reboot and enjoy!
Recovery Mode not working
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
I also have same problem......!!!
akashboghani said:
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
Click to expand...
Click to collapse
I also have same problem..... Now what should I do...??? anyone plz help me.....!!!
akashboghani said:
I succesfully rooted my i9082 using Kingo root. Then, I tried flashing CWM using Odin3 in download mode. Even after successfully flashing, the phone doesn't boot to recovery, it stays stuck at the Samsung boot logo. Even the stock recovery seems to have disappeared. The phone boots normally and into download mode, but I can't seem to access recovery or even bootloader. I have tried several different custom recoveries, and my custom BIN down is at 7 counts. Some applications I got off the Play Store say that I have no available recoveries installed/recognized. What do I do?
Click to expand...
Click to collapse
Flash recovery again, try using Rashr app. If not work, might want to try flashing thru Odin.
Sent from my GT-I9082 using XDA Free mobile app
G'day guys,
I tried to install the CM 11 Rom on my phone (HTC One X 2012 international model), i unlocked the bootloader on the Htcdev site, rooted the phone successfully,
then i rebooted in recovery using ClockworkMod Recovery v5.8.4.0, made a back-up rom then wipe data/factory reset and installed CM 11 rom (cm-11-20140804-SNAPSHOT-M9-endeavoru.zip) and
it came up with Status 7 error and install aborted.....and now it's stuck in a boot loop, when i reboot it boots back into the Clockwork Mod recovery
I tried turning it off and restarting, i've ran the battery down but it still reboots in cwm recovery...
Is there anyway to fix this or have i stuffed my phone?
Any help would be greatly appreciated.....
Troy67 said:
G'day guys,
I tried to install the CM 11 Rom on my phone (HTC One X 2012 international model), i unlocked the bootloader on the Htcdev site, rooted the phone successfully,
then i rebooted in recovery using ClockworkMod Recovery v5.8.4.0, made a back-up rom then wipe data/factory reset and installed CM 11 rom (cm-11-20140804-SNAPSHOT-M9-endeavoru.zip) and
it came up with Status 7 error and install aborted.....and now it's stuck in a boot loop, when i reboot it boots back into the Clockwork Mod recovery
I tried turning it off and restarting, i've ran the battery down but it still reboots in cwm recovery...
Is there anyway to fix this or have i stuffed my phone?
Any help would be greatly appreciated.....
Click to expand...
Click to collapse
Too old recovery you must to use TWRP6.0.1 or higer to be able to install CM11 becouse is KitKat based rom read the OP in CM11 thread and download correct TWRP or CWM. Try with this CWM6.0.4.8
Thanks, I downloaded the CWM 6.0.4.8 like you said, now i have to try and get it out of the boot loop, I've tried about 6 different sites and their methods to fix it but none of them have worked, its still stuck in recovery mode.
My phone doesnt even register when i plug it into my pc either.
Is there any advice you can give to help with this?
Troy67 said:
Thanks, I downloaded the CWM 6.0.4.8 like you said, now i have to try and get it out of the boot loop, I've tried about 6 different sites and their methods to fix it but none of them have worked, its still stuck in recovery mode.
My phone doesnt even register when i plug it into my pc either.
Is there any advice you can give to help with this?
Click to expand...
Click to collapse
are you flashed boot.img via fastboot?
Thant said:
are you flashed boot.img via fastboot?
Click to expand...
Click to collapse
In the instructions it said to install the ROM and then flash the boot.img.
I didnt get past installing the rom before it bootlooped.
Troy67 said:
In the instructions it said to install the ROM and then flash the boot.img.
I didnt get past installing the rom before it bootlooped.
Click to expand...
Click to collapse
go in fastboot and flash the boot.img. Then try to install the rom again
Thant said:
go in fastboot and flash the boot.img. Then try to install the rom again
Click to expand...
Click to collapse
Tried to flash boot.img, pressed enter and it stayed on "waiting on device".
Got into bootloader on phone and even tried a factory reset and got nowhere.
Everytime i selected an option in bootloader ie. fastboot, recovery, it just reboots into recovery.
Troy67 said:
Tried to flash boot.img, pressed enter and it stayed on "waiting on device".
Got into bootloader on phone and even tried a factory reset and got nowhere.
Everytime i selected an option in bootloader ie. fastboot, recovery, it just reboots into recovery.
Click to expand...
Click to collapse
go in bootloader then select fastboot then connect the phone to computer and flash the boot.img if you don't see your device install the correct drivers for that
Thant said:
go in bootloader then select fastboot then connect the phone to computer and flash the boot.img if you don't see your device install the correct drivers for that
Click to expand...
Click to collapse
I dont know how many times i've tried to do a system restore in cwm recovery this week and failed each time, but tonight i tried and after the 3rd attempt it worked.
My phone is back to normal again.
Will be using the wiki instructions when i try again.
Thanks for your help