Hello everyone, this is my first post here
I have a frustrating problem. Yesterday i update my Galaxy Ace 2 from 2.3.6 to Unofficial Cyanogenmod 10, everything was good.
But on first up i get A LOT of "radio has been granted superuser permissions" and i saw that i dont have any GSM signal.
Anyone knows what i do wrong?
PS. I also have a problem with Airplane mode, i just cant turn it off.. everytime i try its getting ON by itself.. ofcourse because of that i cant do any SMS and Calls (and maybe this is why i dont have any signal).
Please, help me.
Sorry for my english
Have you installed stock samsung JB before installing CM10? You have to do it before installing CM10/10.1.
Sent from my GT-I8160P using xda app-developers app
fifo171 said:
Have you installed stock samsung JB before installing CM10? You have to do it before installing CM10/10.1.
Sent from my GT-I8160P using xda app-developers app
Click to expand...
Click to collapse
No, i install CM10 on stock 2.3.6. So i have to flash samsung JB first?
Yeah, you basically flashed a whole new android version that was completely different to 2.3.6, get Odin, flash the latest 4.1.2 stock firmware, root it, then get CyanogenMod again
Sent from my GT-I8160 using xda app-developers app
Okey, i will do this.
Can i use Heimdall (linux) instead of Odin?
pinhead97 said:
Yeah, you basically flashed a whole new android version that was completely different to 2.3.6, get Odin, flash the latest 4.1.2 stock firmware, root it, then get CyanogenMod again
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
The different Android version isn't the problem. On my old Xperia X8 we had officially only Eclair and all the custom ROMs (CM6, CM7, CM9, CM10) worked without problems. The problem here is that Samsung most probably changed some stuff in modem in the JB update (and hence the RIL doesn't work when you install CM10/10.1 on top of GB).
@derester: Yes, if you know how to use it.
Thank you guys!
It worked .
It was loong road to get it work, but im happy now
Related
When I turn wifi on I cannot connect to any network, and when I go to turn on wifi it just says "error". The weird thing though is that I am running complete stock rom (rooted), but I have not installed the update from early April. If anyone knows how I can fix this please let me know. (This might push me to flash ics if I can't fix it)
Install CWM and flash HoNo's ICS. It actually has far fewer bugs than stock (for me ).
Sent from my LG-P930 using XDA
CWM to a new rom
Sent from my LG-P930 using xda premium
rani9990 said:
Install CWM and flash HoNo's ICS. It actually has far fewer bugs than stock (for me ).
Sent from my LG-P930 using XDA
Click to expand...
Click to collapse
i have the same problem with my device galaxy pocket.. can you tell me where can i found the HoNo's ICS.. links maybe.. i have tried flashing it with different firmwares, still the problem persists..
im thinking of flashing a different kernel on it but do you guys think it will help??
thanks in advance..
So I'm coming from cm10 on my phone. I have tried to install to touchwiz base roms and after installing the screen turns black right after the boot screen that says galaxy s3. Wondering why? Any tips?
Has happened in two romz. Wiped everything prior to. I am able to flash and run aosp Roms without issue. Running the latest cwm
Sent from my Nexus 7 using xda app-developers app
dwd3885 said:
So I'm coming from cm10 on my phone. I have tried to install to touchwiz base roms and after installing the screen turns black right after the boot screen that says galaxy s3. Wondering why? Any tips?
Has happened in two romz. Wiped everything prior to. I am able to flash and run aosp Roms without issue. Running the latest cwm
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
AOSP kernel maybe? I know some (all?) of the stock based ROMs don't flash a kernel. Just a guess, haven't gone from AOSP to stock.
Do you have a nandroid of a touchwhiz rom ? I go back and fourth to cm10 to my stock nandroid backup without issue. Try that.
Sent from my SGH-I747M using xda app-developers app
lucidman said:
AOSP kernel maybe? I know some (all?) of the stock based ROMs don't flash a kernel. Just a guess, haven't gone from AOSP to stock.
Click to expand...
Click to collapse
It looks like I need to flash a Touchwiz kernel, you are right. That fixed it. Thanks!
dwd3885 said:
It looks like I need to flash a Touchwiz kernel, you are right. That fixed it. Thanks!
Click to expand...
Click to collapse
What kernel did you use?
Sent from my SAMSUNG-SGH-I747 using xda premium
Kernel was on my mind today since I went from WanamLite to DietICS and suddenly WiFi stopped working. It was because I had flashed the faux123 kernel while on WanamLite and had to reflash it after going to DietICS. Little things I'll eventually get used to!
dwd3885 said:
So I'm coming from cm10 on my phone. I have tried to install to touchwiz base roms and after installing the screen turns black right after the boot screen that says galaxy s3. Wondering why? Any tips?
Has happened in two romz. Wiped everything prior to. I am able to flash and run aosp Roms without issue. Running the latest cwm
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yep definitely kernel, would a said so immediately as I had same issue. Always be weary of the kernel u have installed when flashing to new or different rom as many roms dont have a kernel with them. And many custom kernels will cause this issue. U got it figured out anyways so live and learn and keep it in mind for future
Sent from my SGH-I747M using xda premium
Solved thanks Guy's ran with my backup
Sent from my SGH-I747M using xda premium
Used the stock kernel in the original dev section
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hey guys please give me tips on the twrp
i gave up on cwm i couldn't install cm10 on my galaxy s3 i747m ROGERS (at&t)
so can someone walk me through the twrp way of flashing cm10 rom
pleaaaaaaasee
cheers
totti107 said:
hey guys please give me tips on the twrp
i gave up on cwm i couldn't install cm10 on my galaxy s3 i747m ROGERS (at&t)
so can someone walk me through the twrp way of flashing cm10 rom
pleaaaaaaasee
cheers
Click to expand...
Click to collapse
Only time I had issues with it not working was when I dun goofed my root and I think the issue was I didn't have busy box.
make sure that is installed. Also make sure you are rooted first..
Other then that in detail say what is happening.
Exactly the same as cwm. Except all wiping option are put together in the wipe menu, you can select multiple file to flash on after another and fix permissions is in the advanced menu.
Sent from my SGH-I747 using xda app-developers app
man oh man ,, for some reason i can never install cm10 on my galaxy s3 i747m rogers (att) i tried cwm and twrp both said failed whyyyyy is this happening lol
thank goodness i have backups
can someone tell me how come i cant do this, my galaxy already rooted with superuser rootuscanada file ive and my phone is unlocked what is left
???
Exactly what error is it giving you?
I just picked up my s3 yesterday and was receiving an error 7 with both twrp and cwm. Turned out I needed the latest version of cwm (I picked touch) located
http://www.clockworkmod.com/rommanager to be able to successfully flash the latest cm nightly.
I would try updating to the latest cwm... worked for me.
Sent from my SAMSUNG-SGH-I747M running CM10
The newest version of TWRP, 2.3.X, isn't supported by all ROMs yet. They made a ton of backend changes to improve performance. And I'm guessing CM hasn't included the new update-binary in their builds.
Sent from my SGH-I747 using xda premium
Which way do u recomend to root it . are there different ways to root some of which more friendly with custom roms ?
Sent from my SGH-I747M using xda premium
totti107 said:
Which way do u recomend to root it . are there different ways to root some of which more friendly with custom roms ?
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
I followed this post - http://forum.xda-developers.com/showthread.php?p=28019751
Flash the correct build with oden for root and if you want to flash roms flash a recovery
Sent from my SAMSUNG-SGH-I747M running CM10
I been using the latest version of TWRP and flashed today's CM10 with the KT747 kernel. So, it is supported with non problems here.
Running AT&T SGS3 if that helps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I am having trouble flashing a new ROM I have done it in the past and am used to doing it so I know what needs to be done. When I download a ROM I want to use I download it to my phone directly then I reboot into recovery I have the latest twrp version and I wipe everything then I go to install the ROM and after about 2 seconds it says failed. No matter what ROM I try it does this and I've tried downloading them several times thinking it was a bad download. I was able to install a stock one but I don't like stock and none of the others are working I don't known if I'm doing something wrong or if its my phone but help me please. Thanks in advance.
Sent from my SGH-I747 using xda app-developers app
josht999 said:
So I am having trouble flashing a new ROM I have done it in the past and am used to doing it so I know what needs to be done. When I download a ROM I want to use I download it to my phone directly then I reboot into recovery I have the latest twrp version and I wipe everything then I go to install the ROM and after about 2 seconds it says failed. No matter what ROM I try it does this and I've tried downloading them several times thinking it was a bad download. I was able to install a stock one but I don't like stock and none of the others are working I don't known if I'm doing something wrong or if its my phone but help me please. Thanks in advance.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Are u downloading over WiFi? Did u check if md5 sum's match?
I am downloading over WiFi. And no I have not. What are they supposed to match to? Not really up on the lingo just know what to do and stuff. Very basic stuff
Sent from my SGH-I747 using xda app-developers app
Are you sure you downloaded the correct TWRP Recovery for your phone?
Yes I am. It was doing it on an older version I had so I thought it was cause I hadn't updated in a while and it still kept doing it after I updated.
Sent from my SGH-I747 using xda app-developers app
Hi there
1) Are you from Canada and using a Canadian Recovery for d2can? if so this could be a problem since many updater-scripts see this a fail since they are looking for d2att
2) What ROM's are you trying to flash? AOSP or Stock based touchwiz rom's?
also I would like to direct you to the Q&A, Help and troubleshooting forum, in the event that this post get's moved, you will find it there. They are busy people, but now you know no hard feeling man, just trying to make their job's easier!
cheers
Thanks a lot! And no I'm in the usa and aosp ROMs are what I'm trying to install the stock touchwiz ones worked.
Sent from my SGH-I747 using xda app-developers app
josht999 said:
Thanks a lot! And no I'm in the usa and aosp ROMs are what I'm trying to install the stock touchwiz ones worked.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
update you're bootloader, use the search feature in the Q&A forum
Danvdh said:
update you're bootloader, use the search feature in the Q&A forum
Click to expand...
Click to collapse
so i updated my bootloader then i went to install the latest liguid rom it was succesfully installed then i flashed the latest gaps and now my phone wont turn on... it wont even show that its charging when i have it plugged in. it just acts like its dead so im at a loss. someone please help.
What bootloader did you flash? I had been trying to flash a 4.2.2 rom for a while now and just gave up....status 7 error over and over....and that was on the dlk3 boot.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Unhived__Mind said:
What bootloader did you flash? I had been trying to flash a 4.2.2 rom for a while now and just gave up....status 7 error over and over....and that was on the dlk3 boot.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2374306
Maybe this will help u out...
Unhived__Mind said:
What bootloader did you flash? I had been trying to flash a 4.2.2 rom for a while now and just gave up....status 7 error over and over....and that was on the dlk3 boot.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
at first i tried flashing this oneI747UCDLK3 then i went through the process and it said i had the wrong one so i flashed this one I747MVLDLK4 cause it was the version that it said i had under recovery so then i flashed my new rom and it said succesful and everything looked like it worked then when i went to reboot my phone it never came back on. like its just dead the light doesnt even come on when i have it plugged into the charger took it to att store today and he tried a new battery and that was all and said i needed to make an insurance claim but thats besides the point. im stuck now at just trying to get the phone to turn on cause i can restore it once i do but now im at a loss on how to get it on,
I've looked through all the posts for this phone and haven't had any luck. I'm trying to install the latest version of cyanogenmod 11 on my s2. But it says I need to update the radio. How would I go about doing this?
Sent from my SGH-M919 using XDA Premium 4 mobile app
You can flash uvmc6 if you don't already have it
Sent from my SGH-T989 using xda app-developers app
It works with TLMC4 too.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Those 2 mentioned above are the only ones that work on anything 4.1.2 or above.
Sent from my Nexus 5 using Tapatalk
jkish1752 said:
I've looked through all the posts for this phone and haven't had any luck. I'm trying to install the latest version of cyanogenmod 11 on my s2. But it says I need to update the radio. How would I go about doing this?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you're coming from any rom that is based on JB 4.1.2 or higher then just flash one of the radios found here.
If coming from a rom that is based on ICS 4.0.4 or older then you need to update to stock JB 4.1.2 to get the proper radio files, use Odin and site like SamMobile to get the proper firmware rom or use Samsung Kies.
Once you have the proper radio also make sure you have KK4.4 compatible recovery - You must use TWRP 2.6.1.0 or CWM 6.0.3.7+ recovery or you will boot loop!
Note about just flashing newer radio without going to stock first, some tried this and ran in to lots of issues because those radio .zips don't have all the files needed for the radio's partition, if you were running a JB 4.2/CM 10.1 rom without issue you should be able to get away with just flashing radio.