Related
This is stratosk's Semaphore JB kernel compiled for the GT-I9000B (Latin america variant of the I9000). Stratosk doesn't support this variant, so cronot tweaked the build to make this excellent kernel work for the I9000B variant. He now moved on to another phone so he has stopped working on this build, but not before handing it over to me - so I will now be building this kernel, at least for as long as stratosk does
With that said, here comes the disclaimer: By flashing this kernel, you accept that it comes without any support, neither mine and even less so from stratosk, since he doesn't support this variant on his own releases. So please don't bother him with support questions regarding this specific build. IOW: you'll use this kernel at your own risk.
There were reports of data loss during testing on early builds of the 2.8.x (kernel for Android 4.2) series - there were no more bad reports on later versions, but this needs to be said: Always do a nandroid backup before installing or updating any of the kernels posted here. I won't be held responsible if you lose data while using these kernels!
I *may* be able to help depending on whatever problems you might have, but don't expect timely answers, or any answers at all if I'm not technically able to figure out your problem - I'm a beginner on kernel development, all I did with this really was just some slight tunings and then recompile it for the I9000B. Also, I'm doing this on my free time, which is not much these days, so for now I'm just going to focus on following stratosk builds and recompile them for the I9000B as they come. I can say though, as far as problems, I don't have any with it on my device - it works fine and fast for me.
Now, on to the goodness:
This kernel is exactly the same as stratosk builds (hence, the exact same features and changelogs, including compiler versions and configuration), but with the following modifications:
Swap enabled;
ZRAM enabled as module (To configure it (on CM10), go into Settings / Performance / Memory Management);
KSM support enabled (Disabled on system by default, to enable it (on CM10), go into Settings / Performance / Memory Management)
Note about build version 2.7.0
Stratosk is no longer maintaining the 2.6.x builds that are meant for Android 4.1. But cronot was using Android 4.1 before he sold his SGS, and looking at some of the latest 2.9.0 features he felt like having some of its features on the 2.6.x builds, and so he did it. Since there are quite some important changes he thought it would be better to bump the version number to 2.7.0. Do note though that I provide this kernel here only as a convenience, I won't be supporting this version because I'll be compiling, testing and using only the kernels for Android 4.2, like stratosk does.
The 2.7.0 build contains the following cherry-picks from 2.9.0:
Reduce number of frame buffers for more RAM (on my ex-SGS I'm now at 383Mb, up from 377Mb);
Updated Interactive governor;
ROW I/O Scheduler
Known issues
None, as far as I know - feedback is always welcome!
What works
Everything, as far as I could see.
Usage
Just flash it on CWM like any other kernel. Normal version and 's' version are provided just like on stratosk's release. Use the Semaphore Manager app on Google Play, from stratosk, to setup the kernel features.
All instructions and documentation from stratosk's original Semaphore kernel applies to this one, so look into his own thread for more information.
Source
Github repository
Thanks
To stratosk, of course, for his awesome work on his kernel, and for letting me post this here for I9000-B users;
Everyone who is/was involved on the development of the Semaphore kernel - basically, anyone on stratosk's "thanks" list
Downloads:
Until version 2.9.12 here:
http://code.google.com/p/lu4ndr01d/downloads/list
Version 2.9.13 forth herein: http://code.google.com/p/luandroid/downloads/list
Version 2.9.18 forth herein: http://goo.im/devs/LU4NDR01D/Kernel/Semaphore
LInk my site: www.luandroid.com.br
To download previous versions follow the link my friend cronot.
http://forum.xda-developers.com/showthread.php?t=2011376
Re: [KERNEL][I9000B] Semaphore JB 2.9.7 (I9000-B only)
Version 2.9.8 on line.
Enviado do meu GT-I9000B usando o Tapatalk
Personnel who are having problems with BLN, just install this app and activate BLN will work.
Thank you so much ! I want to try Semaphore but never work on my I9000B
PS: With Bigmem I can't record on 720p but I've read that it's fixed, I'm wrong ?
Gezetah said:
Thank you so much ! I want to try Semaphore but never work on my I9000B
PS: With Bigmem I can't record on 720p but I've read that it's fixed, I'm wrong ?
Click to expand...
Click to collapse
Yes it can not, it is not not fixed, download the "SB", it does not contain the bigmen.
rubervalrfl said:
Yes it can not, it is not not fixed, download the "SB", it does not contain the bigmen.
Click to expand...
Click to collapse
Thats what I've downloaded "Semaphore_JB_2.9.8sb.zip" and I can't record. Do you mean Semaphore_JB_2.9.8b.zip ?
Gezetah said:
Thats what I've downloaded "Semaphore_JB_2.9.8sb.zip" and I can't record. Do you mean Semaphore_JB_2.9.8b.zip ?
Click to expand...
Click to collapse
I did not, which one you downloaded? must be the SB.
rubervalrfl said:
I did not, which one you downloaded? must be the SB.
Click to expand...
Click to collapse
I've downloaded the SB one, but I can't use the camcorder :/
Gezetah said:
I've downloaded the SB one, but I can't use the camcorder :/
Click to expand...
Click to collapse
Dude, you want me to post something you see, because this working perfectly, which rom you are using?
rubervalrfl said:
Dude, you want me to post something you see, because this working perfectly, which rom you are using?
Click to expand...
Click to collapse
Sorry, I don't want to bother you, each phone is different.
By the way I'm using CM10.1 (20130124), I'll try again.
EDIT: I saw this on the Semaphore thread...
Please note that there are 2 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
's' versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
So, I'm using the normal version and everything works fine
PS: can I use the default CM10.1 performance menu or this kernel uses the Semaphore manager only ?
Gezetah said:
Sorry, I don't want to bother you, each phone is different.
By the way I'm using CM10.1 (20130124), I'll try again.
EDIT: I saw this on the Semaphore thread...
Please note that there are 2 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
's' versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
So, I'm using the normal version and everything works fine
PS: can I use the default CM10.1 performance menu or this kernel uses the Semaphore manager only ?
Click to expand...
Click to collapse
Yes you can, I am currently in SlimRom compiled by myself, so I said this all working.
Tried 2.9.8b, everything works good but I get an error everytime I try to flash a rom that does not have Semaphore 2.9.8b.
Zkaar said:
Tried 2.9.8b, everything works good but I get an error everytime I try to flash a rom that does not have Semaphore 2.9.8b.
Click to expand...
Click to collapse
What is the error?
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Re: [KERNEL][I9000B] Semaphore JB 2.9.8 (I9000-B only)
eTomm said:
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Click to expand...
Click to collapse
If you use the normal kernel on the I9000B the touchscreen doesn't work, but it has the same features, you can download the I9000 kernel from the official site.
Enviado desde mi GT-I9000B
eTomm said:
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Click to expand...
Click to collapse
As our friend said above, this compilation is for Latin version of the device, sold in Brazil, Argentina and some other countries in South america
rubervalrfl said:
What is the error?
Click to expand...
Click to collapse
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Zkaar said:
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Click to expand...
Click to collapse
Dude, I'm not getting this error your understanding, your device is "I9000B" or "I9000", where "B", please send the logcat because the way that, I can not help you.
Another thing, as you have seen deterioration, also'm Brazilian, please make me a visit at my site and describe in Portuguese unclear what his mistake, ok.
Zkaar said:
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Click to expand...
Click to collapse
I have the same error when using CMUpdate, the phone restarts after download the rom and it gives me an error.
I have a T-Mobile Samsung Galaxy S4 running CM 10.1.3 Stable and I downloaded a custom kernel called chronickernel v2.1. I was hoping i could get some help with instaling this and overclocking my cpu. Thanks ahead of time.
Kernel are usually flash in custom recovery (zip file). Make sure it's compatible for your phone/ROM.
And I was hoping you could help me over clock my cpu
I use SetCPU but there are other apps out there that can do the same.
Is it okay if I use the CyanogenMod tool in the settings?
Is it okay to use the CyanogenMod tool in the settings?
r0b458 said:
Is it okay to use the CyanogenMod tool in the settings?
Click to expand...
Click to collapse
Hi,
I have had good luck with the KT- kernel in the general section, make sure you pick the proper kernal for your
carrier and whether you have a aosp or twk rom, it installs kt tweaker also, and you can follow their different
settings to run the kernel like you want. It has a setting in kt tweaker to overclock, and numerous other settings,
such as governing your cpu etc.
dklue
r0b458 said:
Is it okay to use the CyanogenMod tool in the settings?
Click to expand...
Click to collapse
Yes. It works perfectly fine.
Just make sure you select "Set on boot" in that menu or you will lose the OC setting on reboot.
You will be happy with ChronicKernel. I've tried every kernel available for the S4 and Chronic has delivered the most stable results for me. (Your milage may vary)
i'm using this rom
2014-05-25: CM-11.0 20140525-UNOFFICIAL [DOWNLOAD]
MD5SUM: 064215c76d4a784f2b7e6e75dc632b18
KitKat based Adreno libs (kernel driver also updated to match)
few hours ago i installed this kernel
http://forum.xda-developers.com/showthread.php?t=2593027 when the screen locked and i try to unlock it by press on power button it gives me blue scree and i have to turn the device off and turn it on again plz guys tell me how to fix it :'(
the kernel you flashed is not compatible with your cm version, try to flash latest cm11 kernel that you can find here
http://forum.xda-developers.com/showthread.php?t=2443593
and remember to clean cache and dalvkit after flash.
fdc77 said:
the kernel you flashed is not compatible with your cm version, try to flash latest cm11 kernel that you can find here
http://forum.xda-developers.com/showthread.php?t=2443593
and remember to clean cache and dalvkit after flash.
Click to expand...
Click to collapse
thank you i'll try this
fdc77 said:
the kernel you flashed is not compatible with your cm version, try to flash latest cm11 kernel that you can find here
http://forum.xda-developers.com/showthread.php?t=2443593
and remember to clean cache and dalvkit after flash.
Click to expand...
Click to collapse
didn't work the same problem
Max Code said:
i'm using this rom
2014-05-25: CM-11.0 20140525-UNOFFICIAL [DOWNLOAD]
MD5SUM: 064215c76d4a784f2b7e6e75dc632b18
KitKat based Adreno libs (kernel driver also updated to match)
few hours ago i installed this kernel
http://forum.xda-developers.com/showthread.php?t=2593027 when the screen locked and i try to unlock it by press on power button it gives me blue scree and i have to turn the device off and turn it on again plz guys tell me how to fix it :'(
Click to expand...
Click to collapse
firstly, install the last build (5/28) with clean installation. also, then you can flash this trim supported kernel; http://forum.xda-developers.com/showthread.php?t=2769315
(I am using this combination, and I've never faced any problem so far.)
hrinfrnlmjsty said:
firstly, install the last build (5/28) with clean installation. also, then you can flash this trim supported kernel; http://forum.xda-developers.com/showthread.php?t=2769315
(I am using this combination, and I've never faced any problem so far.)
Click to expand...
Click to collapse
thank you i installed the original rom from Samsung and the device work but i'll try what you said
Rom updated on May 19. This is LP 5.1 release 2. Latest Google/CM/Resurrection sources + all hardened features. Plus cleaned IP addresses (got rid of Google, Level 3 communication, AT&T, Orange, Department of Defense and other shady ips). Also enabled is Volte (enhanced LTE), which is Voice over LTE. This depends on the service provided by your carrier. In the States, for example, T-Mobile provides such services, which include high definition voice. Usually, you need special update done by the manufacturer in conjunction with your carrier. This rom does not need that. Your Z1 is already provisioned for Volte. You will see in Mobile Settings another entry: Enhanced 4g LTE Mode. ALso, in test menu/phone (*#*#4636#*#*), you will see a Volte Provisioned Flag. So, as soon as your carrier starts Volte, you are all set.
Sources are the same...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12531
_____________________________________________________________________________________
Rom updated to latest sources on May 4. In addition to regular hardened features, more than 40 instances of Google IP, Level 3 Communication and Department of Defense IPs removed from sources both for IPV4 and IPV6. The same is replaced with Opendns IP. Keep in mind that those ips go not only in configuration files, but libs also and the latter cannot be decompiled and fixed...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=12289
______________________________________________________________________________________
Rom Updated to LP 5.1.1. All hardened/security features implemented. Kernel used from Slimroms 5.1.
TWRP 2.8.6 is integrated in kernel.
Obviously, this is an alpha version...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12110
Kernel Source: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
___________________________________________________________________________________________________
Rom updated to 5.1: all hardened features enabled.
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=11901
___________________________________________________________________________________________________
March 31: kernel updated to include screen color calibration:
See Download link: http://forum.xda-developers.com/showpost.php?p=59801528&postcount=94
_________________________________________________________________________________________________
March 27: New build is up, latest CM and Resurect changes; kernel includes voltage table, syncookie and TWRP.
Download Link: http://d-h.st/lw2s
Mirror Link: http://forum.xda-developers.com/devdb/project/dl/?id=11744
_________________________________________________________________________________
March 15: New build is up including latest sources, TWRP integrated in kernel, led lights fixed
DOWNLOAD LINK: http://d-h.st/UO7W
_______________________________________________________________________________________________
Marchh 7: Rom Updated to the latest version + plus all security enhancements. Sources for security changes are the same as posted
See Download section for update
Here is Resurection Remixed Lollipop hardened and secure. Built from sources on February 24.
Changes:
First of all, as many know, encryption on lollipop slows down the device to almost unusable. I was able to resolve that. The culprit was Qualcom crypto module and drivers that collide with graphics. In this rom, when you encrypt your device, there is no noticeable slow down at all. Your master encryption key is no longer stored in crypto module (which rumor has it is backdoored anyway), but rather hashed and salted on the drive itself.
1. Modified kernel to disable creepy SElinux and enable Tomoyo security. Now you can safely use Xposed framework and some modules such as Xprivacy, Appsettings and ShowDialpad, as well as many others
2. Modified kernel to disable qualcom module and drivers
3. Disabled creepy qualcom random number generation and enabled all other methods
4. Enabled 256 bit AES drive encryption as opposed to Google's default 128 bit
5. Enabled all ciphers and hashes available in kernel and disabled by default (thanks Sony and Google)
6. Latest CM changes
7. Omniswitch (to be flashed separately after flashing the rom)
Maybe more
INSTALL:
1. Be on Kitkat, rooted with CWM or TWRP
2. Enter Recovery, wipe System, Data, Cache
3. Flash the rom
4. Flash Omniswitch
5. Reboot and enjoy
If you want to encrypt your device, you need to do 2 additional steps before or after encryption. Go to Developer Options and enable "Force GPU rendering" and "Disable HW overlays. Yes, you have to enable (not disable) "Disable HW overlays" option. The latter won't stick after reboot. So, manually transfer the attached init.d script to /system/etc/init.d and set permissions to at least 744. This way the option will be set at boot and you won't have any noticeable slowdown. In fact, I don't see any difference in speed between encrypted and non encrypted device.
CREDIT: Resurection-Remix Team, Cyanogenmod, AOSP and Omniroms
WARNING:
I am not responsible if your device explodes and kills everyone around. You are doing it on your own. Russians, who are definitely coming, won't help you either :laugh:
Download links
Rom: http://d-h.st/l1rB For Update see Download Section
Omniswitch: http://d-h.st/AbGH
Init.d script (in case you want to encrypt your data): http://d-h.st/QIiE
Sources: https://github.com/ResurrectionRemix
https://github.com/HonamiZ1/android_system_vold
https://github.com/HonamiZ1/kernel_sony_msm8974
XDA:DevDB Information
Resurection-Remixed Lollipop 5.1.1 Hardened, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, Cyanogenmod
Version Information
Status: Testing
Created 2015-02-25
Last Updated 2015-05-19
screenshots
Screenshots added
Kernel updated with CPU voltage table
Kernel updated to allow under/over volting. See attachment.
Instructions:
1. Unzip the file
2. Flash in fastboot: fastboot flash boot boot.img and fastboot reboot
Enjoy
Thanks for this ROM, are there any known bugs?
wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
All CM bugs as of February 24. You can go on their site and see the list of changes...
optimumpro said:
All CM bugs as of February 24. You can go on their site and see the list of changes...
Click to expand...
Click to collapse
So just need to look at http://forum.xda-developers.com/xperia-z1/general/rom-official-cyanogenmod-12-nightlies-t3007118 is that right?
Sorry I have to confirm, there are multiple threads (Official/Development) for CM12.
This ROM will maintain root and recovery, right?
I'll flash and let you know if I find any other issues.
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Kyrius said:
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Click to expand...
Click to collapse
I use Textsecure as sms replacement. Microphone works great...
Very buggy
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
darkdevu said:
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
Click to expand...
Click to collapse
1. Learn the rule about not posting bug reports without logcat
2. Camera works fine: verified
3. Always wipe System/Data/Cache before flashing
4. Are you sure you have Xperia Z1?
Cheers
his profile says Z3. lol
Any further reports on this ROM? Interesting to know how it performs and about stability
Deleted
wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
Rom Updated to the latest version. See Download section in the OP.
and where is the link to the update?
shikimafia said:
and where is the link to the update?
Click to expand...
Click to collapse
It is in Download section:
http://forum.xda-developers.com/devdb/project/?id=8412#downloads
Screenshots added in post #2. Note that only this rom and SlimLP work with the latest Xpivacy module. Tried on Crdroid and others and there is bootloop as soon as you enable Xprivacy.
Has no one tried this rom as not reports or posts
tried flashing update from scratch and get play services fc on every gapps i used............i am guessing i may have to flash initial release and dirty flash this over it? excuse me if i may have got it wrong
shingers5 said:
Has no one tried this rom as not reports or posts
Click to expand...
Click to collapse
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
optimumpro said:
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
Click to expand...
Click to collapse
I'm having issues flashing the new version as getting play services errors.... Was gonna try dirty flash over previous versions
AOSP MASTER BRANCH FOR MANTA DEVICE
Hello everyone, you can download on XDA many good ROMS but each of them are based on "stable" android releases. That's why I chose to share something else.
I am offering a master branch build
Why use master branch ?
clang 3.8 | daily updates | java 1.8
instructions :
reboot to twrp recovery ( you can use mine if you want to use f2fs or having issues flashing my packages)
flasy my package
reset factory and IF YOU COME FROM ANOTHER DISTRIBUTION delete /sdcard/Android/data folder
flash gapps package ( I recommend opengapps)
reboot
I recommend people to factory reset time o time because of the master branch, it can be required to remove some bugs
What is not working/bugging for now
ROOT: latest supersu are patching the boot image and this doesn't work currently with my master branch releases. You need to use SuperSU v2.56
MXPlayer: for some reasons mxplayer doesn't find libcutils.so while it does exists. So for now, you gotta to use some alternatives: vlc, or what ever
Download link
Sources
How to use AdwAway
In oder to get AdAway working you need to do the following:
1/ Set a file at
Code:
su/su.d
with the following content
Code:
mount -o bind /su/etc/hosts /system/etc/hosts;
2/ Make an empty host file at
Code:
/su/etc/hosts
I think you can find a working flashable package doing this on the unoffical adaway thred
XDA:DevDB Information
AOSP Master Branch for Manta, ROM for the Google Nexus 10
Contributors
Khaon
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Stable Release Date: 2016-04-22
Created 2016-01-27
Last Updated 2016-04-21
Can I confirm this is 100% AOSP, untouched?
Are you doing automated nightly builds?
Thanks!
PainToad said:
Can I confirm this is 100% AOSP, untouched?
Are you doing automated nightly builds?
Thanks!
Click to expand...
Click to collapse
This is not 100% PURE aosp.
The base is aosp master branch. I have included some several extra such :
bootanimation
long press recent switches to latest app
led
...
Well nothing much.
The only critical thing I have touched is android permission : I override user's permission for google play service for the location permission access: otherwise it crashes.
I have uploaded a new build.
Too much changes to display here the changelog.
If you want extra tracking you should head here
To me, the main change, is clang prebult updated!
OP updated, root is now working.
I'm not being thick here (sure of that) but despite flashing SU 2.56 , I can't get root permissions at all. Am I missing something?
ace9988 said:
I'm not being thick here (sure of that) but despite flashing SU 2.56 , I can't get root permissions at all. Am I missing something?
Click to expand...
Click to collapse
Hello,
hm this is kinda unexpected, I got supersu permission with this build.
Did you install anything else ?
Khaon said:
Hello,
hm this is kinda unexpected, I got supersu permission with this build.
Did you install anything else ?
Click to expand...
Click to collapse
Nope. I tried flashing superSU on the ROM + open gapps .....the ROM on it's own without the gapps too. Flashed the 2.56 beta build from the link you provided and although supersu appears in the app drawer, the "Enable Superuser" option appears to be greyed out and none of the apps even request root permission.
ace9988 said:
Nope. I tried flashing superSU on the ROM + open gapps .....the ROM on it's own without the gapps too. Flashed the 2.56 beta build from the link you provided and although supersu appears in the app drawer, the "Enable Superuser" option appears to be greyed out and none of the apps even request root permission.
Click to expand...
Click to collapse
HmHm it is kinda late for me ( european timezone) but I have no issues using app requesting SU rights. I will take a look however at it tmr.
Cant install openGapps. It says Error code 25.Your ROM has no buid.prop or default.prop it says
Katamave18 said:
Cant install openGapps. It says Error code 25.Your ROM has no buid.prop or default.prop it says
Click to expand...
Click to collapse
what opengapps version did you isntall ?
I am using pico, and I have no issue flashing it.
ace9988 said:
Nope. I tried flashing superSU on the ROM + open gapps .....the ROM on it's own without the gapps too. Flashed the 2.56 beta build from the link you provided and although supersu appears in the app drawer, the "Enable Superuser" option appears to be greyed out and none of the apps even request root permission.
Click to expand...
Click to collapse
How is your supersu status ?
I have no issue with su.
------------------------------------------------------------------------------------------------------------------------------------------------------------------
I was reported an issue when formating to f2fs rebooting to the rom would format the userdata partition.
I investigated the AOSP code source and some commit format the partition if it fails mounting. Ofc trying to mount a f2fs partition with ext4 is considered as a fail...
Flashing my standalone kernel permit to pass that issue : my stand alone kernel will transform ext4 entries to f2fs(and vice versa) depending on the actual underlying fs.
The current release I am using features fixes for this, however, something broke the libsensors, so I need to find out what.
Katamave18 said:
Cant install openGapps. It says Error code 25.Your ROM has no buid.prop or default.prop it says
Click to expand...
Click to collapse
Ewww, it should work ! Any other informations ? such logs ?
-----------------------------------------------------------------------------------------------------------------------------------------------------------
I am uploading a new build, I had issues for days with the builds.
Please tell me if you got bootloop on reboot. From what I saw bootloops do not longer exist.
I uploaded a new build.
It features master branch 02/21 with my latest kernel.
You just need latest opengapps for marshamallow and supersu 2.56.
Have fun.
All I see is one dated 2/5?
Sent from my Nexus 10 using XDA Free mobile app
"Play Service stopped" after installing Gapps (Install without errors)
I try OpenGapps Pico and Nano.
Der_Graf said:
"Play Service stopped" after installing Gapps (Install without errors)
I try OpenGapps Pico and Nano.
Click to expand...
Click to collapse
Grant play service the location permission and it will be fixed.
Katamave18 said:
Cant install openGapps. It says Error code 25.Your ROM has no buid.prop or default.prop it says
Click to expand...
Click to collapse
I had this issue sometimes when installing the Rom and gapps in the same queue.. Installing the gapps seperatly afterwards worked then.. Try this out
Can´t give permissions because of looped warnings.
ROM only works fine.
I think i will wait for Khaons Kernel with DT2W Patch and use CM13.
Der_Graf said:
Can´t give permissions because of looped warnings.
ROM only works fine.
I think i will wait for Khaons Kernel with DT2W Patch and use CM13.
Click to expand...
Click to collapse
@Der_Graf
Hehe sorry for you this issue happens, the real culprit is Google. Since MM, the dev got to ask permission if not given. Google Play Frameworks/Service doesn't ask for this. So that's why you got FC. You should try after a Factory Rest- you need to that anyway when coming from another ROM- not installing Gapps in order to not have the first setup screen where you will get stuck because of the fc's spam.
Then Install gapps, and, since you will boot on the Home Screen, you should be able, with some pain, to get access to the app menu to get Location permission for Google Play Services.
Then, for any upgrade install, you won't have issues as the permission is already granted.
I know this sucks, but I tried to force give the permisison and it doesnt work :angry:
Ewwwww.
I wanted to share my latest build, as of the 25th feb, but NFC is broken and makes continuous FC'S, this appears also on my friend nexus 6's device, which is still supported by Google. So this is the bad news I've got to understand why this happens, well until Google fixes it or I find the culprit.
However, the good news is, that this friend, maintains more extra features then I do, so the next releases will feature more extra features