I flashed a custom six months ago and all was good until I tried to flash the new version of the rom.
When I go into recovery I get a black screen with the backlight on.
When I press the capacitive buttons I feel the phone vibrate I then connect it to my pc and can send commands to the like reboot phone, reboot bootloader etc.
I have tried flashing the latest versions of 2 custom recoverys, tried clearing the cache using fboot, tried flashing the rom through goomanager and it gets suck at recovery and nothing is working.
When I flash the recovery image is says image flashed successfully.
I have downloaded the ruu for the phone so might have to flash the ruu as it should not need to use the recovery.
Please help I need to flash a custom rom or go back to stock.
Related
Mine is stock 2.3.6 rooted.
I tried to flash other rom today after installing cwm.
However, I am not familiar with flashing...after flashing and reboot, the sreen only stayed in samsung
also I could not restore in cwm , as it said it failed to do( I pressed backup before in cwm..why it doesnt work)
and How could I install the stock rom again now?
download mode and recovery mode is available
I tried to use odin to install recovery again and the stock rom again.(installation is successful)
however, it just keeps rebooting(now showing the samsung-->GTS5660-->animation-->animation again-->animation again)
finally it is working now, as I tried to flash many times
However, I dare not to flash rom anymore..and I do not know really how to flash rom
go to recovery and do factory reset and then reboot
I've been running venom viperx roms for some months. Today I wanted to upgrade from a 3.3 version to 3.4 but to my dismay I found that my recovery no longer worked. If I select the recovery option from the bootloader, I get sent to a black screen where ADB works but nothing I do seems to impact what is seen on the screen. I tried some things like fastboot clear cache, reflashed CWM, tried TWRP but no dice. Then I relocked, reverted back to stock using a RUU, unlocked again and flash CWM again.. Only to still be greeted by nothing but a black screen when entering recovery. I'm not sure what to try next, but what I do know is that I currently seem stuck at a stock ROM and this will not stand
Any advice?
I didn't think it'd be related, but once I started to search for "black recovery after screen replacement" I found a this thread with a link to this recovery which got me back on track.
So two days ago I thought about installing Vision X rom on my Note 3 (T Mobile).
I downloaded the ROM and then backed up my current ROM (nandroid). I had Phillz touch recovery then.
Then I thought about going to TWRP and thus I downloaded the latest zip for my phone and flashed it via Phillz upon trying to reboot into recovery it got stuck in the screen "Rebooting Recovery...".
When I restarted it would still try to reboot into recovery and get stuck. I got out of that by going into download mode and then selecting "Restart Phone".
After that I looked for solutions and upon failing to find any I thought about going back to stock and starting from ground zero. I managed to flash the latest stock using Odin however I forgot to do a factory reset before hand.
When I tried to do a factory reset in my, now stock, phone it failed and then got stuck trying to get into recovery. It would flash "Rebooting Recovery..." then restart and flash that in a loop.
I have lost my root as well in the process and trying to root using Odin and CF-Root just get's me back in the recovery boot loop. I can use the phone OK however this is not a stable situation.
I'm sure I've made some serious errors in the tinkering and would like to get my recovery back. I really love Custom Roms. Any kind and knowledgeable souls out there to help me in my cause?
kaif15 said:
So two days ago I thought about installing Vision X rom on my Note 3 (T Mobile).
I downloaded the ROM and then backed up my current ROM (nandroid). I had Phillz touch recovery then.
Then I thought about going to TWRP and thus I downloaded the latest zip for my phone and flashed it via Phillz upon trying to reboot into recovery it got stuck in the screen "Rebooting Recovery...".
When I restarted it would still try to reboot into recovery and get stuck. I got out of that by going into download mode and then selecting "Restart Phone".
After that I looked for solutions and upon failing to find any I thought about going back to stock and starting from ground zero. I managed to flash the latest stock using Odin however I forgot to do a factory reset before hand.
When I tried to do a factory reset in my, now stock, phone it failed and then got stuck trying to get into recovery. It would flash "Rebooting Recovery..." then restart and flash that in a loop.
I have lost my root as well in the process and trying to root using Odin and CF-Root just get's me back in the recovery boot loop. I can use the phone OK however this is not a stable situation.
I'm sure I've made some serious errors in the tinkering and would like to get my recovery back. I really love Custom Roms. Any kind and knowledgeable souls out there to help me in my cause?
Click to expand...
Click to collapse
Go to the Playstore and download TWRP Coordinator and then
use it to install the latest TWRP recovery for your phone.
Once you can get back into TWRP recovery you need to flash
the cf-autoroot for your phone. Be sure you flash the CORRECT
version of cf-autoroot for your phone's model.
Good luck!
Misterjunky said:
Go to the Playstore and download TWRP Coordinator and then
use it to install the latest TWRP recovery for your phone.
Once you can get back into TWRP recovery you need to flash
the cf-autoroot for your phone. Be sure you flash the CORRECT
version of cf-autoroot for your phone's model.
Good luck!
Click to expand...
Click to collapse
The app is constantly crashing!
It would start for a second then close. I tried the TWRP manager as well with the same result.
I've lost root access when I Odined back to stock, won't I need root access to install new recoveries?
Sounds like you flashed the stock 4.4 firmware and now need recovery to root. Flash this TWRP file using Odin http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.1-hltetmo-4.4.img.tar
Once you flash it, you need to boot into recovery to install supersu to root.
Switch off the Galaxy Note 3 (remove the battery and reinsert if needed)
Next, press and hold simultaneously Volume Up, Home and Power.Release the buttons when the screen flickers and wait for the TWRP menu.
Select Reboot, then System and install Supersu for root.
Once booted, open Supersu to update it and grant permission.
Hope this helps. Good luck.
I've HTC dev bootloader unlocked desire hd with custom recovery. I've tried flashing boot.img (from rom.zip) in fastboot before and after flashing rom in recovery mode. The phone gets past htc logo screen and then goes blank with back light on and stays there forever. I've tried 4 different roms. The only rom I was able to flash was CM7.
The phone is currently at h-boot 2.00.0029, is this why I can't flash new roms?
Any help is really appreciated
tt33333 said:
I've HTC dev bootloader unlocked desire hd with custom recovery. I've tried flashing boot.img (from rom.zip) in fastboot before and after flashing rom in recovery mode. The phone gets past htc logo screen and then goes blank with back light on and stays there forever. I've tried 4 different roms. The only rom I was able to flash was CM7.
The phone is currently at h-boot 2.00.0029, is this why I can't flash new roms?
Any help is really appreciated
Click to expand...
Click to collapse
Update your recovery.img to either of following;either one is good. But make backup of any rom you're on so that you may revert it back in future.
-TWRP 2.7.1.0
-Philz touch CWM
-4EXT Recovery Touch 1.0.0.6 RC 3
By the way which four roms you've tried? if recovery is up-to-date then phone should boot normally.
I have already tried philz touch and twrp. One thing I noticed was when i did a backup in recovery and tried restoring it and always get a md5 error. The same issue with different recoveries and on multiple tries. So I just flashed system.img and boot.img to get my phone back to stock rom.
Thanks
tt33333 said:
I have already tried philz touch and twrp. One thing I noticed was when i did a backup in recovery and tried restoring it and always get a md5 error. The same issue with different recoveries and on multiple tries. So I just flashed system.img and boot.img to get my phone back to stock rom.
Thanks
Click to expand...
Click to collapse
Strange....
Well unmark md5 check on restore. And clear cache/dalvic before rebooting it,Let's see how it goes.Also want to know which perticular rom you've tried so far where you were facing this issue. Also did you format devlog partition before installing CM11 nigthlies 20140618 onwards? If not then try doing so and let me know where you gets stuck?
I'm also S-ON where most other already made S-OFF so feel free to ask me. I'll help as much as i know :good:
Still no luck, it basically does the same thing for all roms. HTC logo shows up and then the screen goes blank with black light on. I've tried these roms:
cm-11-20140710-UNOFFICIAL-M8.1-ace.zip
ICESenseV1.1.zip
cm-7-20130301-NIGHTLY-ace.zip
MK44.4-ace-140719-RELEASE.zip
AoCP6_UW1_Port_for_Ace
I don't get any errors during the flashing process for all except the last one (AoCP6).
Also, the cm7 works sometimes and on other occasions it does the same thing as well. Could it be the sequence? I do a wipe, flash rom and then boot.img? Also, I've a broken volume button, so I flash the rom in recovery and then I do "adb reboot bootloader" and then flash boot.img, could this be causing this issue?
If it's not too much trouble could you upload system.img and boot.img backup from your phone of any custom rom? I would like to flash those from fastboot.
Thanks
tt33333 said:
Still no luck, it basically does the same thing for all roms. HTC logo shows up and then the screen goes blank with black light on. I've tried these roms:
cm-11-20140710-UNOFFICIAL-M8.1-ace.zip
ICESenseV1.1.zip
cm-7-20130301-NIGHTLY-ace.zip
MK44.4-ace-140719-RELEASE.zip
AoCP6_UW1_Port_for_Ace
I don't get any errors during the flashing process for all except the last one (AoCP6).
Also, the cm7 works sometimes and on other occasions it does the same thing as well. Could it be the sequence? I do a wipe, flash rom and then boot.img? Also, I've a broken volume button, so I flash the rom in recovery and then I do "adb reboot bootloader" and then flash boot.img, could this be causing this issue?
If it's not too much trouble could you upload system.img and boot.img backup from your phone of any custom rom? I would like to flash those from fastboot.
Thanks
Click to expand...
Click to collapse
Except Mokee 4.4.4 Release and CM11 M8.1 i used Philz but before that i was on CWM 5.8.1.5 and i had no issues with it. Also i've tried TWRP 2.7.1.0 too. Works perfect but i'm used to reboot into recovery by default option,which only available in CWM. Other recoveries boots into blank screen,If you powered off the device and put on charge.
Nope there isn't any sequence.... either you flash boot.img first or last it only helps in device to boot and have proper connectivity. Even if you don't flash boot.img then only your device should hang on bootloop or boots but no wifi reception. So these is something different.
Sure i can provide system.img and boot.img of M8.1 which i'm currently on. But how sure you're that it will work? I mean do you have a backup of it? Or fresh install. Also wanted to know have you ever tried format devlog partition and FULL WIPE your device?
Try using following attachments. FULL WIPE it's just an alternative of manual wipes,works with every recovery out there. And devlog partition will be formatted if any means of corrupted or remnant leftover using format_devlog zip. Meanwhile provide me details whether you got backup of M8.1 CM11 or going to flash fresh install. So that i can provide boot and system.img of it.
It's working now. Installed 4ext recovery and ran you'r script.
Thanks for all the help
My phone stuck at mi logo even the recovery can't be opened
I was using cynogen 12.1 and then i download its update after that it sticks at mi logo
Unable to open recovery
Thanks in advance help as soon as possible
Don't worry, if you can enter fastboot, you can fix it. Follow this guide http://en.miui.com/forum.php?mod=viewthread&tid=23234&page=1#pid459792 If you do everything right, stock miui5 or miui6 will be installed, depends what you choose. I recommend you to download v45 miui5, I have used that version few times. You will have to install custom recovery and root again if you want a custom rom later. If the Miflash program does not recognize your phone in fastboot mode, then download and install these drivers, I think it should work. http://forum.xda-developers.com/redmi-1s/general/tool-adb-drivers-redmi-1s-t2904411
You need not go back to stock miui. If you update the rom, the recovery should still be intake, unless you did something to it, which is quite unlikely unless you selected to flash it as well.
Make sure your phone is completely off. Remove battery and insert back. Pressing the vol - and power button should boot your phone into the recovery(if i rmb correctly). From there, reflash the first cm12.1, not the update which you download, and it should boot fine again. Preferably, go for a clean install, unless you have data which u haven't backup, then go for the first.
If you flash a recovery and if indeed your recovery is corrupted, just reflash using adb.
Flashing a rom should not cause any damage to your recovery as it doesn't touch your recovery files.