Related
My phone is unrooted (and with the original ROM).
After installing Keys I get the message:
"Your device's current firmware version is not supported to update via Kies"
* Current firmware version: PDA|:LJ3 / PHONE:LJ2 / CSC: LJ2 (ILO)
If I select Tools->"Firmware Upgrade and Initialization", I get the message:
`GT-N7100' does not support initializing.
Any ideas?, thanks
amirdt said:
My phone is unrooted (and with the original ROM).
After installing Keys I get the message:
"Your device's current firmware version is not supported to update via Kies"
* Current firmware version: PDA|:LJ3 / PHONE:LJ2 / CSC: LJ2 (ILO)
If I select Tools->"Firmware Upgrade and Initialization", I get the message:
`GT-N7100' does not support initializing.
Any ideas?, thanks
Click to expand...
Click to collapse
Look here http://www.sammobile.com/firmware/?page=3&model=GT-N7100&pcode=ILO&os=1&type=1#firmware, if you have that firmware (N7100XXALIH) you have the correct version. If you don`t flash it with Odin. You have the wrong software atm for Kies support.
I have the exact same problem as amirdt.
My phone (Samsung Galaxy Note 2) runs the stock rom it came with. I haven't rooted the device since it works perfectly with the stock ROM, but once connected to Kies, I get following:
Firmware information:
Your device's current firmware version is not supported to update firmware via Kies.
Current firmware version:
PDA:LJ3 / PHONE:LJ2 / CSC:LJ4 (XXX) (What does the XXX stand for?)
Build number
N7100XXALJ3
Reading gee2012's reply above, I visited the site that was linked in the post and did a search on GT-7100. Found me a long list of frimwares. All of them were Android 4.1.1, except one:
GT-N7100 - Open Europe
PDA: N7100XXDLJ2
CSC: N7100OXADLJ2
Version: 4.1.2
Date: 2012-10-29
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
And this is pretty much where my knowledge comes to an end.
I find 64 matches for my current build and one for the 4.1.2 (listed above).
I don't understand why Kies is giving me the error message about my firmware not being supported
I don't know whether I am eligible to update my phone to Jellybean 4.1.2. Kies is a no-go because of the error message. If I try to select Tools -> Firmware Upgrade and Initialization, I get the error "GT-N7100 does not support initializing".
If I try the "software update" check on my phone, it says "Latest updates have already been installed". I don't know what to do or believe on this one.
I'm kind of confused. I can't determine whether my phone is up to date and working as intended or if there is really something that is not right with the firmware. Should I be able to upgrade to Android 4.1.2?
I'm sorry for many questions, but right now I am both out of ideas and knowledge. If someone smarter than me could provide me some support/answers on this one, I'd be most happy. I use my phone a lot and it's my primary tool when on the field.
Headscan said:
I have the exact same problem as amirdt.
My phone (Samsung Galaxy Note 2) runs the stock rom it came with. I haven't rooted the device since it works perfectly with the stock ROM, but once connected to Kies, I get following:
Firmware information:
Your device's current firmware version is not supported to update firmware via Kies.
Current firmware version:
PDA:LJ3 / PHONE:LJ2 / CSC:LJ4 (XXX) (What does the XXX stand for?)
Build number
N7100XXALJ3
Reading gee2012's reply above, I visited the site that was linked in the post and did a search on GT-7100. Found me a long list of frimwares. All of them were Android 4.1.1, except one:
GT-N7100 - Open Europe
PDA: N7100XXDLJ2
CSC: N7100OXADLJ2
Version: 4.1.2
Date: 2012-10-29
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
And this is pretty much where my knowledge comes to an end.
I find 64 matches for my current build and one for the 4.1.2 (listed above).
I don't understand why Kies is giving me the error message about my firmware not being supported
I don't know whether I am eligible to update my phone to Jellybean 4.1.2. Kies is a no-go because of the error message. If I try to select Tools -> Firmware Upgrade and Initialization, I get the error "GT-N7100 does not support initializing".
If I try the "software update" check on my phone, it says "Latest updates have already been installed". I don't know what to do or believe on this one.
I'm kind of confused. I can't determine whether my phone is up to date and working as intended or if there is really something that is not right with the firmware. Should I be able to upgrade to Android 4.1.2?
I'm sorry for many questions, but right now I am both out of ideas and knowledge. If someone smarter than me could provide me some support/answers on this one, I'd be most happy. I use my phone a lot and it's my primary tool when on the field.
Click to expand...
Click to collapse
2 things:
1. If you want to update with Kies and receive OTA updates you need to flash the firmware that is specific for your country/region
2. If you want to flash the latest firmware like 4.1.2 you can flash any firmware with Odin but you cannot use Kies/OTA`s anymore.
This will also change the CSC file.
gee2012 said:
2 things:
1. If you want to update with Kies and receive OTA updates you need to flash the firmware that is specific for your country/region
2. If you want to flash the latest firmware like 4.1.2 you can flash any firmware with Odin but you cannot use Kies/OTA`s anymore.
This will also change the CSC file.
Click to expand...
Click to collapse
Thank you for a quick reply, gee2012.
I prefer to keep things as simple as possible without too much in-depth technical tweaking. Your answers confused me even more.
1. I have very little to no clue how to figure out what my firmware would be (Sweden - and there seem to be several of them), even less to determine which one it would be the right one.
2. I don't know whether to trust Kies or the "software update" in "About device". Kies reports an error, the software update says that all of the latest updates are already installed. Does this mean that OTA updates should work?
I'm sorry for asking more questions. What I would need a is a definite step-by-step guide how to fix these kinds of problems.
Headscan said:
Thank you for a quick reply, gee2012.
I prefer to keep things as simple as possible without too much in-depth technical tweaking. Your answers confused me even more.
1. I have very little to no clue how to figure out what my firmware would be (Sweden - and there seem to be several of them), even less to determine which one it would be the right one.
2. I don't know whether to trust Kies or the "software update" in "About device". Kies reports an error, the software update says that all of the latest updates are already installed. Does this mean that OTA updates should work?
I'm sorry for asking more questions. What I would need a is a definite step-by-step guide how to fix these kinds of problems.
Click to expand...
Click to collapse
Check on www.sammobile.com/firmware for the latest firmware for your country/region. If that version is not identical to the version that is on your phone Kies and OTA`s will not work. In that case you need to download and flash that firmware from the Sammobile website. That`s it mate. You can check your firmware in the phone dialpad by pressing *#1234#.
Once again, thank you for your reply and guidance. I think things might become a bit interesting now:
GT-N7100 Nordic countries 2012 October Android 4.1.1 N7100XXALJ3 N7100OXXALJ4
The PDA=N7100XXALJ3 (displayed as "AP" when I did that dialpad trick you mentioned, and shows up as the build number in "About device") and CSC=N7100OXXALJ4. To me it looks like a match and also be the latest firmware for my country/region. If this is correct, then Kies and OTA should work? Kies still reports the same error about the firmware, but the software update option on the phone reports that latest updates have already been installed.
Does this indicate that the phone is working fine as is OTA, but Kies is not?
I also have this problem, I went from Omega rom back to stock through Kies recovery procedure. Now when I check it says the exact same thing
"Your device's current firmware version is not supported to update via Kies" Homw is this possible?
Thx
gee2012 said:
2 things:
1. If you want to update with Kies and receive OTA updates you need to flash the firmware that is specific for your country/region
2. If you want to flash the latest firmware like 4.1.2 you can flash any firmware with Odin but you cannot use Kies/OTA`s anymore.
This will also change the CSC file.
Click to expand...
Click to collapse
Hi. I'm new to this forum. Hope someone can help me or at least give light to the situation.
I followed the first option. i downloaded the official stock rom from sammobile for country: Philippines and Provider: Globe. and i was able to successfully flash it. my phone now shows the correct Kernels, etc.
However, when i tried to connect my Samsung Galaxy S2, Kies still says:
Your device's current firmware version is not supported to update firmware via Kies.
- Current firmware version: PDA:LPF / PHONE:LPB / CSC:LPF (COA)
not sure if this is because this isn't the correct firmware for my phone, country and provider or if kies shows this error because the phone, which is a Samsung S2 I9100 is still not elligible to upgrade to JellyBean since Samsung still hasn't rolled out the Jelly Bean update for S2 yet. If it is the former, what should i do?
Hope the experts here can help me or clarify matters. Thanks in advance you guys.
Guys, same problem here.
Phone's ROM seems to be (as far as I can tell from Samfirmware) a Hong Kong/Phillipines version and to receive updates, from the guidance above, it seems I will have to flash UK stock ROM. On Samfirmware there does not appear to be a ROM for my carrier (Orange/EE) though the phone was bought unbranded, not through them. Couple of questions if anyone can help:
- So long as I flash a ROM for the right region, is it necessary to have the right carrier's ROM?
- Does anyone know if 4.1.2 is actually being distributed in the UK?
- I can swap SIM to O2 temporarily (There is an O2 ROM on Samfirmware). I presume if there is a uk (O2) update I could install their 4.1.1 stock, install the 4.1.2 update and the unlock the phone? Any problems with this?
Any help much appreciated.
(N7100 - Galaxy Note 2.)
SORTED! Flashed latest stock ROM from Samfirmware which is 4.1.1 (o2 UK) and multitasking features all working. Kies still says it won't update the phone. Phone says latest updates installed but as far as I can tell that's because 4.1.2 isn't out yet. Not particularly a problem now though. Will just flash latest stock when it comes available.
Hi all, hope someone can help me out here.
I am using N7100
Version 4.1.1
Base Band Version N7100XXALJ2
Build Number JRO03C.N7100ASALK3
I tried to get the new version 4.1.2 through OTA but it seems keep checking for software updates and than nothing happen.
And I tried to by Kies and it said that I have the newest version already.
Do I have the newest version already ?
Thanks everyone for the help in advance.
Regards,
wilson0917 said:
Hi all, hope someone can help me out here.
I am using N7100
Version 4.1.1
Base Band Version N7100XXALJ2
Build Number JRO03C.N7100ASALK3
I tried to get the new version 4.1.2 through OTA but it seems keep checking for software updates and than nothing happen.
And I tried to by Kies and it said that I have the newest version already.
Do I have the newest version already ?
Thanks everyone for the help in advance.
Regards,
Click to expand...
Click to collapse
I have the same problem. Have you rooted your phone?
AaronUK said:
I have the same problem. Have you rooted your phone?
Click to expand...
Click to collapse
I rooted back before and now I rolled back to the Offical Firm ware which I mentioned above.
I even did the triangle away so it reset to "0"
Did you root your phone ?
wilson0917 said:
I rooted back before and now I rolled back to the Offical Firm ware which I mentioned above.
I even did the triangle away so it reset to "0"
Did you root your phone ?
Click to expand...
Click to collapse
Yes.
I have heard others having similar problems if they have modified their phone in any way.
On your phone go to Settings > About device > Status > Device status. What does this show? Is it Modified ?
Download and flash via odin
Sent from my GT-N7100 using xda premium
AaronUK said:
Yes.
I have heard others having similar problems if they have modified their phone in any way.
On your phone go to Settings > About device > Status > Device status. What does this show? Is it Modified ?
Click to expand...
Click to collapse
Yes it showed Modified. Is that possible I can change it back ?
Thanks
wilson0917 said:
Yes it showed Modified. Is that possible I can change it back ?
Thanks
Click to expand...
Click to collapse
I am sure you can but you will need to download the official stock ROM for your handset and flash again using ODIN. Best check with people who are more 'in the know' on here though first.
Samsung are making it harder for us people messing around with their phones.
I have the same problem. The OTA update didn't roll out on my phone yet and Samsung Kies tells me I have the latest version. However, my device status says normal and I've checked my flash counter on Download Mode and it said no. (Bought this Note 2 second handedly so I didn't know if the previous owner had rooted this device.)
Chileno4Live said:
I have the same problem. The OTA update didn't roll out on my phone yet and Samsung Kies tells me I have the latest version. However, my device status says normal and I've checked my flash counter on Download Mode and it said no. (Bought this Note 2 second handedly so I didn't know if the previous owner had rooted this device.)
Click to expand...
Click to collapse
Thanks for the info, may be I should try to roll back the stock ROM by ODIN and see if I can get the update.
Thank you all.
Regards,
you don't have update because there is no update for your CSC (for now).
Check your CSC to be 100% sure (not csc from *#1234# ,but csc that is showing this app:https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=pl )
promi said:
you don't have update because there is no update for your CSC (for now).
Check your CSC to be 100% sure.
Click to expand...
Click to collapse
There is no update for my CSC either but the original poster has the same problem as mine where it keeps checking and does not respond. It should let you know if there is an update or not. In the OP's case that does not happen.
wilson0917 said:
I tried to get the new version 4.1.2 through OTA but it seems keep checking for software updates and than nothing happen.
Click to expand...
Click to collapse
My way to solve this problem:
After rooted and reseting counter with triangle away,
After that, make a full wipe data in recovery mode. (so, make a backup up)
Now in status, check device status. It shoud be 'normal' and you can now check update
I have same issue. Not really looking forward to .2 but have tried. Totally stock and did .1 update last night a couple hours after I got it. I am putting my phone through benchmarks first before I start doing any mods.
Sent from my MB860 using xda premium
I have the same issue. Totally stock, not been done anything to, not updating to 4.1.2
Is there any fix for this, or do I have to send my phone in and wiait for weeks?
@rbiter said:
I have same issue. Not really looking forward to .2 but have tried. Totally stock and did .1 update last night a couple hours after I got it. I am putting my phone through benchmarks first before I start doing any mods.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
the first that you should know if it is a 4.1.2 rom in you country/mobile company. Some companies have a slooooow development.
If there is check kies. there is an option (I cant remember what it says esactly) which makes you write your model name and your serial. This update the device to the latest update in theory skipping this check for modifications. It will make a factori reset in your phone so backup important files.
The most important thing is to check the antivirus and the firewall it is known that sometimes it deny the acces to check OTAs
hope it have been useful for U!
Ozzy1 said:
I have the same issue. Totally stock, not been done anything to, not updating to 4.1.2
Is there any fix for this, or do I have to send my phone in and wiait for weeks?
Click to expand...
Click to collapse
Enviat des del meu GT-N7100
aka_sirok said:
the first that you should know if it is a 4.1.2 rom in you country/mobile company. Some companies have a slooooow development.
If there is check kies. there is an option (I cant remember what it says esactly) which makes you write your model name and your serial. This update the device to the latest update in theory skipping this check for modifications. It will make a factori reset in your phone so backup important files.
The most important thing is to check the antivirus and the firewall it is known that sometimes it deny the acces to check OTAs
hope it have been useful for U!
Enviat des del meu GT-N7100
Click to expand...
Click to collapse
Thank you very much!
I talked to Samsung Norway and they said the update was avaible. I then told them it wasnt working, and their solution was... wait for it... return the phone...
After your post I trailed the forum, found this: http://forum.xda-developers.com/showthread.php?t=2088809
It worked like a charm. It downloaded the update, put in on the phone, and it even didnt erase ANY of my settings while updating. It booted up, and there it was, an updated verion with all my apps and setting.
Thank you very much, once again!
Firmware Upgrade
I am unfortunately having problems updating my N7100 also. I am a bit perplexed and dont know what I have done wrong if anything.
First off my phone is not rooted at the moment and as far as I can tell was never rooted (bought brand new / device status shows normal). Here are the steps that I used:
1. Downloaded KIES onto macbook.
2. Attached phone via usb cable.
3. Followed on screen instructions for firmware update. Took about 10 min to do its thing.
4. Phone rebooted automatically and applied upgrade.
After all was complete my android version still shows 4.1.1
What the heck is wrong? I saw the upgrade taking place (I guess it was upgrading).
Now when I am attached via KIES it shows:
Current Firmware version: PDA: LJ3 / PHONE: LJ2 / CSC: LJ2 (AFR)
Latest Firmware version : PDA: LJ3 / PHONE: LJ2 / CSC: LJ2 (AFR)
Can anyone please advise what is going on here please?
Thanks in advance,
DragonGunner
dragongunner86 said:
I am unfortunately having problems updating my N7100 also. I am a bit perplexed and dont know what I have done wrong if anything.
First off my phone is not rooted at the moment and as far as I can tell was never rooted (bought brand new / device status shows normal). Here are the steps that I used:
1. Downloaded KIES onto macbook.
2. Attached phone via usb cable.
3. Followed on screen instructions for firmware update. Took about 10 min to do its thing.
4. Phone rebooted automatically and applied upgrade.
After all was complete my android version still shows 4.1.1
What the heck is wrong? I saw the upgrade taking place (I guess it was upgrading).
Now when I am attached via KIES it shows:
Current Firmware version: PDA: LJ3 / PHONE: LJ2 / CSC: LJ2 (AFR)
Latest Firmware version : PDA: LJ3 / PHONE: LJ2 / CSC: LJ2 (AFR)
Can anyone please advise what is going on here please?
Thanks in advance,
DragonGunner
Click to expand...
Click to collapse
ALJ3 is a 4.1.1 update so it doesnt changed your version of android... Hope that they'll update ASAP..
enviat desde el meu GT-N7100 //*//
A same update problem! (Galaxy Note 2)
Today, when i wanted to officialy update my device from 4.1.1 to 4.1.2 a message told me that:
" you're device was modified. The updates aren't available. "
/ fatal error / : --- i forgot that i rooted my phone with ODIN ---
So, what i did:
1 - enter in SU application and hit "DELETE ROOT"
2- REBOOT my device
3- try again to update my device via OTA, and... same problem, the phone tells me that i can't update because i modified it. :crying:
What i have to do now, so i can update my device in 4.1.2 (via OTA or KIES) ?
Thanks for help !
duk3d said:
A same update problem! (Galaxy Note 2)
Today, when i wanted to officialy update my device from 4.1.1 to 4.1.2 a message told me that:
" you're device was modified. The updates aren't available. "
/ fatal error / : --- i forgot that i rooted my phone with ODIN ---
So, what i did:
1 - enter in SU application and hit "DELETE ROOT"
2- REBOOT my device
3- try again to update my device via OTA, and... same problem, the phone tells me that i can't update because i modified it. :crying:
What i have to do now, so i can update my device in 4.1.2 (via OTA or KIES) ?
Thanks for help !
Click to expand...
Click to collapse
try entering kies and chose the optiond that require to write your model and serial (it is behind the battery) then accept and connect the phone when they require
Sent from my GT-N7100 using xda app-developers app
i connected my GSIII to Kies to check for the 4.3 update, which i guess hasnt come out yet. but instead of telling me that the firmware is up-to-date it says "Your device's current firmware version is not supported to update firmware via kies."
any idea why?
i Have an AT&T Galaxy SII (Rooted) on Official Android 4.1.2.
thanks in advance
I was told being rooted would give this error.
You can blame your carrier for this one. Sometimes OTA updates from your carrier can cause that message to appear, and Kies will say its an invalid ROM
My device is GT-N7100 and I purchased it (8 months ago) from Samsung center.
My current firmware is 4.1.1 (see attached image)
4.3 is already available in my country which i checked on www.sammobile.com (see attached images)
The problem is that i don't get any notification to update software. Even if i manually try to do it by going into settings>about device>update software it still says "the latest update has already been installed".
Whereas, few of my other friends have already updated their devices though OTA without any problem.
Kindly guide me why i am not able to update my firmware through OTA?
Did you try to update with Kies ? Generally your first picture should have a last line which gives information of which country rom you have. Either picture is not seen fully or your Rom is not your country's rom(complicated sentence I know ) So if your ROM really have update Kies should see it but if your rom is an international rom or different country rom then OTA may not be possible through normal ways, you may have to use Odin.
Imranhakro said:
My device is GT-N7100 and I purchased it (8 months ago) from Samsung center.
My current firmware is 4.1.1 (see attached image)
4.3 is already available in my country which i checked on www.sammobile.com (see attached images)
The problem is that i don't get any notification to update software. Even if i manually try to do it by going into settings>about device>update software it still says "the latest update has already been installed".
Whereas, few of my other friends have already updated their devices though OTA without any problem.
Kindly guide me why i am not able to update my firmware through OTA?
Click to expand...
Click to collapse
Then manually flash the rom you want to use via ODIN.
If the answer is no, why have you posted this topic on XDA instead of your devices official support forum??
I was trying to root my samsung galaxy a5 2017 with TWRP and I accidentally deleted system data. Then, I tried rebooting the phone and it got stuck in a bootloop. To fix this problem I tried flashing stock 8.0 firmware from sammobile via odin and I got this error:
Sw rev. Check fail. Device: 6, binary 5. I think that this means I have to flash the latest stock firmware but there isn't a newer one.
After that, I tried to use my phone by flashing a custom rom (Lineage 15.1) and I discovered that I have no imei,no baseband and no ip adress. I have installed many custom roms but the issue is still there. I am trying to get my phone to work with stock firmware and fix the IMEI issue but odin wont let me flash because of that error. I would appreciate if anyone could help. Thanks.
Flash a firmware version that contains S6 or U6 in the middle, it won't work with U5/S5! Not the Samsung phone S5 or S6, but rather, the firmware version.
For cellular, change the modem firmware, or backup and wipe /data/. /data/data/?.
Unless the efs was wiped (probably not if the baseband version isn't there, load a backup then, only if the efs was wiped don't restore it otherwise, and it must not be a backup created with an older twrp, view the recovery log in the backup folder)
julianmunozvaras said:
I was trying to root my samsung galaxy a5 2017 with TWRP and I accidentally deleted system data. Then, I tried rebooting the phone and it got stuck in a bootloop. To fix this problem I tried flashing stock 8.0 firmware from sammobile via odin and I got this error:
Sw rev. Check fail. Device: 6, binary 5. I think that this means I have to flash the latest stock firmware but there isn't a newer one.
After that, I tried to use my phone by flashing a custom rom (Lineage 15.1) and I discovered that I have no imei,no baseband and no ip adress. I have installed many custom roms but the issue is still there. I am trying to get my phone to work with stock firmware and fix the IMEI issue but odin wont let me flash because of that error. I would appreciate if anyone could help. Thanks.
Click to expand...
Click to collapse
You aren't flashing the current version of software.
Sent from my Samsung SM-A520W using XDA Labs
iloveoreos said:
You aren't flashing the current version of software.
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
I tried installing the latest version available and I had the same error.
julianmunozvaras said:
I tried installing the latest version available and I had the same error.
Click to expand...
Click to collapse
Well, I don't know what else could be wrong.
Sent from my Samsung SM-A520W using XDA Labs
julianmunozvaras said:
I tried installing the latest version available and I had the same error.
Click to expand...
Click to collapse
Listen to me, it happened to me 2 days ago, and I came to the conclusion that I was not flash the latest firmware. You need to flash the same firmware with the same bootloader or more recent, the error you receive is because you are flashing an older version of bootloader. Do one thing, type the code *#1234# on the phone keypad
mark the code that gives you on 'AP and look it on Sammobile at https://www.sammobile.com/firmwares/galaxy-a5/SM-A520F/ITV/ select your language and look for the firmware with your own code . You will see that odin flash it.
Samsung A520F Custom Binary Error
Hello please I have been trying to reload my Samsung A520F firmware for a couple of weeks
It all started with the phone trying to update (over WIFI) and somewhere along the line files must have gotten corrupted
This led to the phone constantly restart and shutting down applications
I decided to just download the firmware and use Odin to reload. This, unfortunately, didn't go so well as now the phone isn't starting up anymore but can still get to download mode.
PDA firmware is A520FXXUACSE6
Region is EUR
Network is OPEN
every time I use this firmware I get the error
" Custom binary (BOOT) Blocked by FRP Lock
Please note currently at the moment phone refuses to boot up I read about removing OEM lock and don't know if this is the problem.
Please could you help out
koolblowkid said:
Hello please I have been trying to reload my Samsung A520F firmware for a couple of weeks
It all started with the phone trying to update (over WIFI) and somewhere along the line files must have gotten corrupted
This led to the phone constantly restart and shutting down applications
I decided to just download the firmware and use Odin to reload. This, unfortunately, didn't go so well as now the phone isn't starting up anymore but can still get to download mode.
PDA firmware is A520FXXUACSE6
Region is EUR
Network is OPEN
every time I use this firmware I get the error
" Custom binary (BOOT) Blocked by FRP Lock
Please note currently at the moment phone refuses to boot up I read about removing OEM lock and don't know if this is the problem.
Please could you help out
Click to expand...
Click to collapse
Obviously you are frp locked. But I didn't think that blocked from flashing official.